! Started logfile: /scr/pima/bg219b_uvs/J0707+6110_X_dfm.log on Thu May 19 20:08:10 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0707+6110_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0707+6110_X_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.817063 visibilities/baseline/integration-bin.
! Found source: J0707+6110
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24708 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0707+6110_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018770Jy  sigma=23.628985
! Fit after  self-cal, rms=0.802330Jy  sigma=18.598555
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7271 mas, bmaj=1.408 mas, bpa=-62.85 degrees
! Estimated noise=0.447194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.149615 Jy
! Component: 100  -  total flux cleaned = 0.185395 Jy
! Total flux subtracted in 100 components = 0.185395 Jy
! Clean residual min=-0.007744 max=0.014413 Jy/beam
! Clean residual mean=0.000002 rms=0.001867 Jy/beam
! Combined flux in latest and established models = 0.185395 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.185395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074191Jy  sigma=1.648422
! Fit after  self-cal, rms=0.074111Jy  sigma=1.646397
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152429 Jy
! Component: 100  -  total flux cleaned = 0.023126 Jy
! Total flux subtracted in 100 components = 0.023126 Jy
! Clean residual min=-0.006600 max=0.013620 Jy/beam
! Clean residual mean=0.000008 rms=0.001520 Jy/beam
! Combined flux in latest and established models = 0.208521 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.208521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069877Jy  sigma=1.540189
! Fit after  self-cal, rms=0.069848Jy  sigma=1.539092
! Inverting map 
! Added new window around map position (2.6, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123317 Jy
! Component: 100  -  total flux cleaned = 0.0185468 Jy
! Total flux subtracted in 100 components = 0.0185468 Jy
! Clean residual min=-0.005606 max=0.006312 Jy/beam
! Clean residual mean=0.000012 rms=0.001235 Jy/beam
! Combined flux in latest and established models = 0.227068 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 18 components and 0.227068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066997Jy  sigma=1.465610
! Fit after  self-cal, rms=0.066845Jy  sigma=1.462174
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.762 mas, bpa=-67.01 degrees
! Estimated noise=0.197915 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00784388 Jy
! Component: 100  -  total flux cleaned = 0.0125643 Jy
! Component: 150  -  total flux cleaned = 0.0158354 Jy
! Component: 200  -  total flux cleaned = 0.0181844 Jy
! Total flux subtracted in 200 components = 0.0181844 Jy
! Clean residual min=-0.004697 max=0.005834 Jy/beam
! Clean residual mean=0.000064 rms=0.001345 Jy/beam
! Combined flux in latest and established models = 0.245252 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 50 components and 0.245252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065842Jy  sigma=1.436733
! Fit after  self-cal, rms=0.065773Jy  sigma=1.435039
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 1.762 at -67.01 degrees (North through East)
! Clean map  min=-0.0043863  max=0.19468 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        0.93     
!   LA        0.96     MK        0.98     NL        1.00     OV        0.98     
!   PT        1.07     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.02     KP        0.96     
!   LA        0.97     MK        1.04     NL        1.02     OV        1.01     
!   PT        1.12     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.05     KP        0.98     
!   LA        1.00     MK        1.01     NL        1.04     OV        1.02     
!   PT        1.13     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.97     KP        0.97     
!   LA        0.97     MK        1.00     NL        1.00     OV        1.00     
!   PT        1.09     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.01     KP        0.95     
!   LA        0.96     MK        0.97     NL        1.00     OV        0.98     
!   PT        1.08     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.00     KP        0.96     
!   LA        0.97     MK        1.01     NL        1.04     OV        1.01     
!   PT        1.11     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.03     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.04     OV        1.00     
!   PT        1.13     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.99     KP        0.96     
!   LA        0.94     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.11     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        0.95     
!   LA        0.95     MK        1.00     NL        1.01     OV        0.98     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.95     KP        0.95     
!   LA        0.93     MK        0.95     NL        0.98     OV        0.95     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.98     KP        0.92     
!   LA        0.94     MK        1.02     NL        0.98     OV        0.96     
!   PT        1.04     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.94     HN        0.92     KP        0.93     
!   LA        0.94     MK        0.92     NL        0.98     OV        0.92     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.065773Jy  sigma=1.435039
! Fit after  self-cal, rms=0.063716Jy  sigma=1.398074
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.769 mas, bpa=-66.8 degrees
! Estimated noise=0.196424 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001325 Jy
! Component: 100  -  total flux cleaned = 0.00155826 Jy
! Component: 150  -  total flux cleaned = 0.00169149 Jy
! Component: 200  -  total flux cleaned = 0.00179948 Jy
! Total flux subtracted in 200 components = 0.00179948 Jy
! Clean residual min=-0.004030 max=0.003890 Jy/beam
! Clean residual mean=0.000048 rms=0.001091 Jy/beam
! Combined flux in latest and established models = 0.247052 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.247052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063618Jy  sigma=1.395891
! Fit after  self-cal, rms=0.063626Jy  sigma=1.395507
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063626Jy  sigma=1.395507
! Fit after  self-cal, rms=0.062392Jy  sigma=1.361474
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=1.765 mas, bpa=-66.97 degrees
! Estimated noise=0.19606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100488 Jy
! Component: 100  -  total flux cleaned = -0.00112852 Jy
! Component: 150  -  total flux cleaned = -0.00115431 Jy
! Component: 200  -  total flux cleaned = -0.0012218 Jy
! Total flux subtracted in 200 components = -0.0012218 Jy
! Clean residual min=-0.001696 max=0.002276 Jy/beam
! Clean residual mean=0.000006 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.24583 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.24583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062334Jy  sigma=1.360161
! Fit after  self-cal, rms=0.062338Jy  sigma=1.359726
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196565 Jy
! Component: 100  -  total flux cleaned = 0.00266334 Jy
! Component: 150  -  total flux cleaned = 0.0029844 Jy
! Component: 200  -  total flux cleaned = 0.00332636 Jy
! Total flux subtracted in 200 components = 0.00332636 Jy
! Clean residual min=-0.001490 max=0.001586 Jy/beam
! Clean residual mean=0.000007 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.249156 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 0.249156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062254Jy  sigma=1.357747
! Fit after  self-cal, rms=0.062250Jy  sigma=1.357657
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062250Jy  sigma=1.357657
! Fit after  self-cal, rms=0.062112Jy  sigma=1.357407
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.765 mas, bpa=-67.05 degrees
! Estimated noise=0.195518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000340647 Jy
! Component: 100  -  total flux cleaned = -0.000126835 Jy
! Component: 150  -  total flux cleaned = 3.02771e-06 Jy
! Component: 200  -  total flux cleaned = 0.000115156 Jy
! Total flux subtracted in 200 components = 0.000115156 Jy
! Clean residual min=-0.001437 max=0.001528 Jy/beam
! Clean residual mean=0.000006 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.249272 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.249272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062081Jy  sigma=1.356748
! Fit after  self-cal, rms=0.062079Jy  sigma=1.356667
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.50216e-06 Jy
! Component: 100  -  total flux cleaned = 0.000179254 Jy
! Component: 150  -  total flux cleaned = 0.000269455 Jy
! Component: 200  -  total flux cleaned = 0.000335594 Jy
! Total flux subtracted in 200 components = 0.000335594 Jy
! Clean residual min=-0.001443 max=0.001484 Jy/beam
! Clean residual mean=0.000006 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.249607 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 0.249607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062066Jy  sigma=1.356375
! Fit after  self-cal, rms=0.062063Jy  sigma=1.356323
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062063Jy  sigma=1.356323
! Fit after  self-cal, rms=0.061967Jy  sigma=1.356220
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.245 mas, bmaj=2.987 mas, bpa=-81.67 degrees
! Estimated noise=0.236455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000755695 Jy
! Component: 100  -  total flux cleaned = -0.000778308 Jy
! Component: 150  -  total flux cleaned = -0.000609911 Jy
! Component: 200  -  total flux cleaned = -0.000483254 Jy
! Total flux subtracted in 200 components = -0.000483254 Jy
! Clean residual min=-0.001814 max=0.002148 Jy/beam
! Clean residual mean=0.000010 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.249124 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 102 components and 0.249124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061959Jy  sigma=1.356089
! Fit after  self-cal, rms=0.061955Jy  sigma=1.355999
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.32761e-05 Jy
! Component: 100  -  total flux cleaned = 2.97582e-05 Jy
! Component: 150  -  total flux cleaned = 0.000137069 Jy
! Component: 200  -  total flux cleaned = 0.000225192 Jy
! Total flux subtracted in 200 components = 0.000225192 Jy
! Clean residual min=-0.001801 max=0.002129 Jy/beam
! Clean residual mean=0.000010 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.249349 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 104 components and 0.249349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061954Jy  sigma=1.355977
! Fit after  self-cal, rms=0.061952Jy  sigma=1.355935
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=1.765 mas, bpa=-67.07 degrees
! Estimated noise=0.195135 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.007 x 1.765 at -67.07 degrees (North through East)
! Clean map  min=-0.0013597  max=0.19303 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7313 mas, bmaj=1.412 mas, bpa=-62.94 degrees
! Estimated noise=0.440124 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147208 Jy
! Component: 100  -  total flux cleaned = 0.183862 Jy
! Component: 150  -  total flux cleaned = 0.201166 Jy
! Component: 200  -  total flux cleaned = 0.211845 Jy
! Total flux subtracted in 200 components = 0.211845 Jy
! Clean residual min=-0.003897 max=0.005930 Jy/beam
! Clean residual mean=-0.000005 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.211845 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.211845 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=1.765 mas, bpa=-67.07 degrees
! Estimated noise=0.195135 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113856 Jy
! Component: 100  -  total flux cleaned = 0.0180749 Jy
! Component: 150  -  total flux cleaned = 0.0224268 Jy
! Component: 200  -  total flux cleaned = 0.0255007 Jy
! Total flux subtracted in 200 components = 0.0255007 Jy
! Clean residual min=-0.001846 max=0.002043 Jy/beam
! Clean residual mean=-0.000002 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.237345 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 46 components and 0.237345 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.245 mas, bmaj=2.987 mas, bpa=-81.67 degrees
! Estimated noise=0.236455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036708 Jy
! Component: 100  -  total flux cleaned = 0.00612017 Jy
! Component: 150  -  total flux cleaned = 0.00789426 Jy
! Component: 200  -  total flux cleaned = 0.00919304 Jy
! Total flux subtracted in 200 components = 0.00919304 Jy
! Clean residual min=-0.002018 max=0.002000 Jy/beam
! Clean residual mean=0.000008 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.246538 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000794238 Jy
! Component: 100  -  total flux cleaned = 0.00123987 Jy
! Component: 150  -  total flux cleaned = 0.00153515 Jy
! Component: 200  -  total flux cleaned = 0.0017212 Jy
! Total flux subtracted in 200 components = 0.0017212 Jy
! Clean residual min=-0.001835 max=0.002059 Jy/beam
! Clean residual mean=0.000009 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.248259 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 113 components and 0.248259 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=1.765 mas, bpa=-67.07 degrees
! Estimated noise=0.195135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000341694 Jy
! Component: 100  -  total flux cleaned = 0.000522513 Jy
! Component: 150  -  total flux cleaned = 0.000730322 Jy
! Component: 200  -  total flux cleaned = 0.000822401 Jy
! Total flux subtracted in 200 components = 0.000822401 Jy
! Clean residual min=-0.001367 max=0.001614 Jy/beam
! Clean residual mean=0.000005 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.249082 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 130 components and 0.249082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061963Jy  sigma=1.356141
! Fit after  self-cal, rms=0.061953Jy  sigma=1.355936
wmodel /J0707+6110_X_map.mod
! wmodel: Unable to open new model file: /J0707+6110_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0707+6110_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.007 x 1.765 at -67.07 degrees (North through East)
! Clean map  min=-0.0013491  max=0.19287 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0707+6110_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.19287 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000352777 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.548727 0.548727 1.09745 2.19491 4.38981 8.77963 17.5593 35.1185 70.237
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.192 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  546.72 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0707+6110_X_dfm.log closed on Thu May 19 20:08:13 2016