! Started logfile: /scr/pima/bg219b_uvs/J0703-0051_X_dfm.log on Thu May 19 20:08:01 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0703-0051_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0703-0051_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.892593 visibilities/baseline/integration-bin.
! Found source: J0703-0051
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17352 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0703-0051_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.053971Jy  sigma=23.666969
! Fit after  self-cal, rms=0.710790Jy  sigma=15.884241
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6519 mas, bmaj=1.776 mas, bpa=-3.02 degrees
! Estimated noise=0.41275 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.219823 Jy
! Component: 100  -  total flux cleaned = 0.284702 Jy
! Total flux subtracted in 100 components = 0.284702 Jy
! Clean residual min=-0.014271 max=0.027599 Jy/beam
! Clean residual mean=0.000002 rms=0.003176 Jy/beam
! Combined flux in latest and established models = 0.284702 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.284702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095018Jy  sigma=2.073466
! Fit after  self-cal, rms=0.094687Jy  sigma=2.067956
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0299102 Jy
! Component: 100  -  total flux cleaned = 0.0452359 Jy
! Total flux subtracted in 100 components = 0.0452359 Jy
! Clean residual min=-0.011725 max=0.022372 Jy/beam
! Clean residual mean=0.000001 rms=0.002351 Jy/beam
! Combined flux in latest and established models = 0.329938 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.329938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083760Jy  sigma=1.795067
! Fit after  self-cal, rms=0.083620Jy  sigma=1.792624
! Inverting map 
! Added new window around map position (-1, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191268 Jy
! Component: 100  -  total flux cleaned = 0.0290413 Jy
! Total flux subtracted in 100 components = 0.0290413 Jy
! Clean residual min=-0.011756 max=0.014076 Jy/beam
! Clean residual mean=0.000000 rms=0.001939 Jy/beam
! Combined flux in latest and established models = 0.358979 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.35898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078321Jy  sigma=1.669097
! Fit after  self-cal, rms=0.077907Jy  sigma=1.660293
! Inverting map 
! Added new window around map position (-0.4, -16.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116451 Jy
! Component: 100  -  total flux cleaned = 0.0187482 Jy
! Total flux subtracted in 100 components = 0.0187482 Jy
! Clean residual min=-0.010384 max=0.010505 Jy/beam
! Clean residual mean=0.000000 rms=0.001691 Jy/beam
! Combined flux in latest and established models = 0.377728 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 42 components and 0.377728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075817Jy  sigma=1.611443
! Fit after  self-cal, rms=0.075592Jy  sigma=1.606067
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.82 mas, bmaj=2.001 mas, bpa=-3.161 degrees
! Estimated noise=0.261962 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00928943 Jy
! Component: 100  -  total flux cleaned = 0.0138621 Jy
! Component: 150  -  total flux cleaned = 0.0163947 Jy
! Component: 200  -  total flux cleaned = 0.0188391 Jy
! Total flux subtracted in 200 components = 0.0188391 Jy
! Clean residual min=-0.008701 max=0.011205 Jy/beam
! Clean residual mean=-0.000002 rms=0.001981 Jy/beam
! Combined flux in latest and established models = 0.396567 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 57 components and 0.396567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074058Jy  sigma=1.568655
! Fit after  self-cal, rms=0.073961Jy  sigma=1.565635
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.82 x 2.001 at -3.161 degrees (North through East)
! Clean map  min=-0.0077908  max=0.28101 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        1.05     KP        0.95     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.95     
!   PT        1.17     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.07     KP        0.97     
!   LA        1.00     MK        1.04     NL        1.01     OV        1.00     
!   PT        1.19     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.08     KP        1.01     
!   LA        1.00     MK        1.05     NL        1.03     OV        1.00     
!   PT        1.20     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.92     HN        1.03     KP        0.98     
!   LA        0.98     MK        1.00     NL        0.99     OV        0.96     
!   PT        1.19     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     HN        1.05     KP        0.98     
!   LA        0.96     MK        1.01     NL        0.99     OV        0.95     
!   PT        1.17     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.01     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.01     OV        0.97     
!   PT        1.20     SC        1.06     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.05     KP        0.97     
!   LA        0.98     MK        1.02     NL        1.01     OV        0.95     
!   PT        1.17     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.03     KP        0.96     
!   LA        0.95     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.16     SC        1.06     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.90     HN        1.03     KP        0.95     
!   LA        0.95     MK        0.96     NL        0.98     OV        0.94     
!   PT        1.13     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.91     HN        0.99     KP        0.94     
!   LA        0.95     MK        0.99     NL        1.00     OV        0.95     
!   PT        1.14     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.87     HN        0.96     KP        0.93     
!   LA        0.98     MK        0.93     NL        0.95     OV        0.90     
!   PT        1.10     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.073961Jy  sigma=1.565635
! Fit after  self-cal, rms=0.069011Jy  sigma=1.449959
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8238 mas, bmaj=2.012 mas, bpa=-3.362 degrees
! Estimated noise=0.262203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00562603 Jy
! Component: 100  -  total flux cleaned = 0.00765297 Jy
! Component: 150  -  total flux cleaned = 0.00838196 Jy
! Component: 200  -  total flux cleaned = 0.00857039 Jy
! Total flux subtracted in 200 components = 0.00857039 Jy
! Clean residual min=-0.004344 max=0.005425 Jy/beam
! Clean residual mean=-0.000000 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.405137 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 84 components and 0.405137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068203Jy  sigma=1.430023
! Fit after  self-cal, rms=0.068135Jy  sigma=1.427797
! Inverting map 
! Added new window around map position (-0.8, 12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00496949 Jy
! Component: 100  -  total flux cleaned = 0.00752525 Jy
! Component: 150  -  total flux cleaned = 0.00909284 Jy
! Component: 200  -  total flux cleaned = 0.0097611 Jy
! Total flux subtracted in 200 components = 0.0097611 Jy
! Clean residual min=-0.003660 max=0.003632 Jy/beam
! Clean residual mean=-0.000001 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.414898 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 115 components and 0.414898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067712Jy  sigma=1.418246
! Fit after  self-cal, rms=0.067685Jy  sigma=1.417806
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067685Jy  sigma=1.417806
! Fit after  self-cal, rms=0.067276Jy  sigma=1.410980
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.822 mas, bmaj=2.009 mas, bpa=-3.431 degrees
! Estimated noise=0.261084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000564487 Jy
! Component: 100  -  total flux cleaned = 0.0011672 Jy
! Component: 150  -  total flux cleaned = 0.00149046 Jy
! Component: 200  -  total flux cleaned = 0.00172997 Jy
! Total flux subtracted in 200 components = 0.00172997 Jy
! Clean residual min=-0.003059 max=0.003288 Jy/beam
! Clean residual mean=-0.000001 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.416628 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 131 components and 0.416628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067104Jy  sigma=1.407615
! Fit after  self-cal, rms=0.067092Jy  sigma=1.407319
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.4, 37).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164865 Jy
! Component: 100  -  total flux cleaned = 0.00224375 Jy
! Component: 150  -  total flux cleaned = 0.00300215 Jy
! Component: 200  -  total flux cleaned = 0.00350854 Jy
! Total flux subtracted in 200 components = 0.00350854 Jy
! Clean residual min=-0.002858 max=0.002930 Jy/beam
! Clean residual mean=-0.000001 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.420137 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 153 components and 0.420137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066909Jy  sigma=1.403221
! Fit after  self-cal, rms=0.066897Jy  sigma=1.403040
! Inverting map 
! Added new window around map position (-7.8, -37.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00245757 Jy
! Component: 100  -  total flux cleaned = 0.00332411 Jy
! Component: 150  -  total flux cleaned = 0.00383657 Jy
! Component: 200  -  total flux cleaned = 0.00416258 Jy
! Total flux subtracted in 200 components = 0.00416258 Jy
! Clean residual min=-0.002559 max=0.002509 Jy/beam
! Clean residual mean=-0.000001 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.424299 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 179 components and 0.424299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066772Jy  sigma=1.400282
! Fit after  self-cal, rms=0.066767Jy  sigma=1.400189
! Inverting map 
! Added new window around map position (6, -18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223384 Jy
! Component: 100  -  total flux cleaned = 0.00279367 Jy
! Component: 150  -  total flux cleaned = 0.00307843 Jy
! Component: 200  -  total flux cleaned = 0.00316429 Jy
! Total flux subtracted in 200 components = 0.00316429 Jy
! Clean residual min=-0.002474 max=0.002303 Jy/beam
! Clean residual mean=-0.000000 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.427464 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 200 components and 0.427464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066650Jy  sigma=1.398113
! Fit after  self-cal, rms=0.066647Jy  sigma=1.398056
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066647Jy  sigma=1.398056
! Fit after  self-cal, rms=0.066403Jy  sigma=1.397526
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.821 mas, bmaj=2.009 mas, bpa=-3.476 degrees
! Estimated noise=0.260198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000404344 Jy
! Component: 100  -  total flux cleaned = -0.000317876 Jy
! Component: 150  -  total flux cleaned = -0.00019821 Jy
! Component: 200  -  total flux cleaned = -0.000123246 Jy
! Total flux subtracted in 200 components = -0.000123246 Jy
! Clean residual min=-0.002278 max=0.002159 Jy/beam
! Clean residual mean=-0.000000 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.427341 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 215 components and 0.427341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066349Jy  sigma=1.396527
! Fit after  self-cal, rms=0.066349Jy  sigma=1.396500
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348524 Jy
! Component: 100  -  total flux cleaned = 0.000488898 Jy
! Component: 150  -  total flux cleaned = 0.000523368 Jy
! Component: 200  -  total flux cleaned = 0.000588219 Jy
! Total flux subtracted in 200 components = 0.000588219 Jy
! Clean residual min=-0.002250 max=0.002129 Jy/beam
! Clean residual mean=-0.000000 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.427929 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 231 components and 0.427929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066315Jy  sigma=1.395854
! Fit after  self-cal, rms=0.066314Jy  sigma=1.395832
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066314Jy  sigma=1.395832
! Fit after  self-cal, rms=0.066146Jy  sigma=1.395671
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.061 mas, bmaj=3.393 mas, bpa=0.7321 degrees
! Estimated noise=0.341488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421509 Jy
! Component: 100  -  total flux cleaned = 0.000158716 Jy
! Component: 150  -  total flux cleaned = 6.70436e-05 Jy
! Component: 200  -  total flux cleaned = 2.48833e-05 Jy
! Total flux subtracted in 200 components = 2.48833e-05 Jy
! Clean residual min=-0.002867 max=0.002769 Jy/beam
! Clean residual mean=-0.000001 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.427954 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 246 components and 0.427954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066127Jy  sigma=1.395305
! Fit after  self-cal, rms=0.066122Jy  sigma=1.395201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.98989e-05 Jy
! Component: 100  -  total flux cleaned = 0.000117387 Jy
! Component: 150  -  total flux cleaned = 0.000185355 Jy
! Component: 200  -  total flux cleaned = 0.000219371 Jy
! Total flux subtracted in 200 components = 0.000219371 Jy
! Clean residual min=-0.002836 max=0.002678 Jy/beam
! Clean residual mean=-0.000001 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.428173 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 263 components and 0.428173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066116Jy  sigma=1.395133
! Fit after  self-cal, rms=0.066114Jy  sigma=1.395096
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8205 mas, bmaj=2.008 mas, bpa=-3.499 degrees
! Estimated noise=0.259565 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8205 x 2.008 at -3.499 degrees (North through East)
! Clean map  min=-0.0032856  max=0.2798 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6537 mas, bmaj=1.783 mas, bpa=-3.213 degrees
! Estimated noise=0.407854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.216946 Jy
! Component: 100  -  total flux cleaned = 0.283972 Jy
! Component: 150  -  total flux cleaned = 0.317801 Jy
! Component: 200  -  total flux cleaned = 0.336527 Jy
! Total flux subtracted in 200 components = 0.336527 Jy
! Clean residual min=-0.006244 max=0.010330 Jy/beam
! Clean residual mean=0.000001 rms=0.001512 Jy/beam
! Combined flux in latest and established models = 0.336527 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.336527 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8205 mas, bmaj=2.008 mas, bpa=-3.499 degrees
! Estimated noise=0.259565 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155114 Jy
! Component: 100  -  total flux cleaned = 0.025937 Jy
! Component: 150  -  total flux cleaned = 0.0340539 Jy
! Component: 200  -  total flux cleaned = 0.0406794 Jy
! Total flux subtracted in 200 components = 0.0406794 Jy
! Clean residual min=-0.004376 max=0.005685 Jy/beam
! Clean residual mean=0.000001 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 0.377207 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 46 components and 0.377207 Jy
! Inverting map 
! Added new window around map position (0.4, -14.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00609532 Jy
! Component: 100  -  total flux cleaned = 0.0110041 Jy
! Component: 150  -  total flux cleaned = 0.015309 Jy
! Component: 200  -  total flux cleaned = 0.0189997 Jy
! Total flux subtracted in 200 components = 0.0189997 Jy
! Clean residual min=-0.003710 max=0.003901 Jy/beam
! Clean residual mean=0.000000 rms=0.000851 Jy/beam
! Combined flux in latest and established models = 0.396206 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 70 components and 0.396206 Jy
! Inverting map 
! Added new window around map position (-4.2, -19.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00361755 Jy
! Component: 100  -  total flux cleaned = 0.00627205 Jy
! Component: 150  -  total flux cleaned = 0.0084578 Jy
! Component: 200  -  total flux cleaned = 0.0104701 Jy
! Total flux subtracted in 200 components = 0.0104701 Jy
! Clean residual min=-0.003001 max=0.003143 Jy/beam
! Clean residual mean=0.000000 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.406677 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 101 components and 0.406677 Jy
! Inverting map 
! Added new window around map position (3, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00310063 Jy
! Component: 100  -  total flux cleaned = 0.00476614 Jy
! Component: 150  -  total flux cleaned = 0.00653702 Jy
! Component: 200  -  total flux cleaned = 0.00807756 Jy
! Total flux subtracted in 200 components = 0.00807756 Jy
! Clean residual min=-0.002483 max=0.002316 Jy/beam
! Clean residual mean=0.000000 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.414754 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 125 components and 0.414754 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.061 mas, bmaj=3.393 mas, bpa=0.7321 degrees
! Estimated noise=0.341488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00327752 Jy
! Component: 100  -  total flux cleaned = 0.00541076 Jy
! Component: 150  -  total flux cleaned = 0.00678914 Jy
! Component: 200  -  total flux cleaned = 0.00809136 Jy
! Total flux subtracted in 200 components = 0.00809136 Jy
! Clean residual min=-0.003000 max=0.002338 Jy/beam
! Clean residual mean=-0.000000 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.422845 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000962479 Jy
! Component: 100  -  total flux cleaned = 0.00177938 Jy
! Component: 150  -  total flux cleaned = 0.00242235 Jy
! Component: 200  -  total flux cleaned = 0.003025 Jy
! Total flux subtracted in 200 components = 0.003025 Jy
! Clean residual min=-0.002698 max=0.002191 Jy/beam
! Clean residual mean=-0.000000 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.42587 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 200 components and 0.42587 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8205 mas, bmaj=2.008 mas, bpa=-3.499 degrees
! Estimated noise=0.259565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000241996 Jy
! Component: 100  -  total flux cleaned = 0.000632966 Jy
! Component: 150  -  total flux cleaned = 0.000886303 Jy
! Component: 200  -  total flux cleaned = 0.00117286 Jy
! Total flux subtracted in 200 components = 0.00117286 Jy
! Clean residual min=-0.001975 max=0.001750 Jy/beam
! Clean residual mean=0.000000 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.427043 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 228 components and 0.427043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066011Jy  sigma=1.393105
! Fit after  self-cal, rms=0.065986Jy  sigma=1.392465
wmodel /J0703-0051_X_map.mod
! wmodel: Unable to open new model file: /J0703-0051_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0703-0051_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8205 x 2.008 at -3.499 degrees (North through East)
! Clean map  min=-0.0018522  max=0.27654 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0703-0051_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.276543 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00044345 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.481064 0.481064 0.962129 1.92426 3.84852 7.69703 15.3941 30.7881 61.5762
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.276 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  623.617 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0703-0051_X_dfm.log closed on Thu May 19 20:08:05 2016