! Started logfile: /scr/pima/bg219b_uvs/J0701+6936_X_dfm.log on Thu May 19 20:07:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0701+6936_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0701+6936_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.805983 visibilities/baseline/integration-bin.
! Found source: J0701+6936
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22632 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0701+6936_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012353Jy  sigma=23.393179
! Fit after  self-cal, rms=0.883663Jy  sigma=20.319396
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6621 mas, bmaj=1.321 mas, bpa=-78.03 degrees
! Estimated noise=0.50529 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0784091 Jy
! Component: 100  -  total flux cleaned = 0.10665 Jy
! Total flux subtracted in 100 components = 0.10665 Jy
! Clean residual min=-0.012272 max=0.038653 Jy/beam
! Clean residual mean=-0.000008 rms=0.002877 Jy/beam
! Combined flux in latest and established models = 0.10665 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.10665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088724Jy  sigma=2.004727
! Fit after  self-cal, rms=0.088402Jy  sigma=1.995625
! Inverting map 
! Added new window around map position (1.8, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0332299 Jy
! Component: 100  -  total flux cleaned = 0.0493048 Jy
! Total flux subtracted in 100 components = 0.0493048 Jy
! Clean residual min=-0.007075 max=0.017950 Jy/beam
! Clean residual mean=-0.000001 rms=0.001726 Jy/beam
! Combined flux in latest and established models = 0.155955 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 17 components and 0.155955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072852Jy  sigma=1.610362
! Fit after  self-cal, rms=0.070397Jy  sigma=1.552806
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161475 Jy
! Component: 100  -  total flux cleaned = 0.0238882 Jy
! Total flux subtracted in 100 components = 0.0238882 Jy
! Clean residual min=-0.005166 max=0.007548 Jy/beam
! Clean residual mean=0.000003 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.179843 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.179843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066200Jy  sigma=1.445536
! Fit after  self-cal, rms=0.065710Jy  sigma=1.433445
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740128 Jy
! Component: 100  -  total flux cleaned = 0.0112939 Jy
! Total flux subtracted in 100 components = 0.0112939 Jy
! Clean residual min=-0.004373 max=0.004298 Jy/beam
! Clean residual mean=0.000004 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.191137 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.191137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064808Jy  sigma=1.409421
! Fit after  self-cal, rms=0.064721Jy  sigma=1.406964
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8866 mas, bmaj=1.728 mas, bpa=-79.73 degrees
! Estimated noise=0.217987 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00424711 Jy
! Component: 100  -  total flux cleaned = 0.00576112 Jy
! Component: 150  -  total flux cleaned = 0.00624253 Jy
! Component: 200  -  total flux cleaned = 0.00662515 Jy
! Total flux subtracted in 200 components = 0.00662515 Jy
! Clean residual min=-0.004091 max=0.004089 Jy/beam
! Clean residual mean=0.000026 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 0.197762 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 38 components and 0.197762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064449Jy  sigma=1.399837
! Fit after  self-cal, rms=0.064422Jy  sigma=1.398817
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8866 x 1.728 at -79.73 degrees (North through East)
! Clean map  min=-0.003801  max=0.097879 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.04     KP        0.95     
!   LA        0.96     MK        1.00     NL        1.05     OV        0.93     
!   PT        1.05     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.03     KP        0.95     
!   LA        0.98     MK        1.12     NL        1.05     OV        0.99     
!   PT        1.12     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.07     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.03     OV        0.97     
!   PT        1.11     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.03     KP        0.97     
!   LA        0.96     MK        1.00     NL        1.03     OV        0.98     
!   PT        1.06     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.01     KP        0.96     
!   LA        0.95     MK        1.01     NL        1.00     OV        0.96     
!   PT        1.09     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.04     OV        0.98     
!   PT        1.10     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.98     KP        1.01     
!   LA        1.02     MK        1.01     NL        1.05     OV        1.02     
!   PT        1.11     SC        1.13     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.06     KP        1.00     
!   LA        0.97     MK        1.02     NL        1.01     OV        0.93     
!   PT        1.10     SC        1.08     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        0.98     KP        0.96     
!   LA        0.97     MK        0.95     NL        1.12     OV        0.98     
!   PT        1.09     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.98     KP        0.99     
!   LA        0.93     MK        1.01     NL        1.00     OV        0.94     
!   PT        1.06     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        1.03     KP        0.95     
!   LA        0.94     MK        0.93     NL        1.00     OV        0.95     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.96     HN        0.93     KP        0.93     
!   LA        0.97     MK        0.97     NL        0.99     OV        0.89     
!   PT        1.02     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.064422Jy  sigma=1.398817
! Fit after  self-cal, rms=0.064114Jy  sigma=1.379258
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8922 mas, bmaj=1.738 mas, bpa=-79.62 degrees
! Estimated noise=0.218977 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103669 Jy
! Component: 100  -  total flux cleaned = -0.00023804 Jy
! Component: 150  -  total flux cleaned = -0.000489344 Jy
! Component: 200  -  total flux cleaned = -0.000576214 Jy
! Total flux subtracted in 200 components = -0.000576214 Jy
! Clean residual min=-0.003148 max=0.003208 Jy/beam
! Clean residual mean=0.000028 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.197186 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 44 components and 0.197186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064046Jy  sigma=1.377788
! Fit after  self-cal, rms=0.064069Jy  sigma=1.377238
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064069Jy  sigma=1.377238
! Fit after  self-cal, rms=0.063726Jy  sigma=1.360370
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8937 mas, bmaj=1.739 mas, bpa=-79.85 degrees
! Estimated noise=0.218484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000664354 Jy
! Component: 100  -  total flux cleaned = -0.000931482 Jy
! Component: 150  -  total flux cleaned = -0.00104833 Jy
! Component: 200  -  total flux cleaned = -0.00104855 Jy
! Total flux subtracted in 200 components = -0.00104855 Jy
! Clean residual min=-0.001869 max=0.001898 Jy/beam
! Clean residual mean=0.000002 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.196137 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 47 components and 0.196137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063682Jy  sigma=1.359548
! Fit after  self-cal, rms=0.063700Jy  sigma=1.359220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.52185e-05 Jy
! Component: 100  -  total flux cleaned = -8.64307e-05 Jy
! Component: 150  -  total flux cleaned = -0.000110129 Jy
! Component: 200  -  total flux cleaned = -0.000151921 Jy
! Total flux subtracted in 200 components = -0.000151921 Jy
! Clean residual min=-0.001819 max=0.001800 Jy/beam
! Clean residual mean=0.000002 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.195985 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.195985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063676Jy  sigma=1.358816
! Fit after  self-cal, rms=0.063676Jy  sigma=1.358709
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063676Jy  sigma=1.358709
! Fit after  self-cal, rms=0.063517Jy  sigma=1.358619
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8935 mas, bmaj=1.737 mas, bpa=-79.86 degrees
! Estimated noise=0.217656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000554442 Jy
! Component: 100  -  total flux cleaned = -0.000654191 Jy
! Component: 150  -  total flux cleaned = -0.00069583 Jy
! Component: 200  -  total flux cleaned = -0.000733746 Jy
! Total flux subtracted in 200 components = -0.000733746 Jy
! Clean residual min=-0.001744 max=0.001741 Jy/beam
! Clean residual mean=0.000002 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.195252 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.195252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063496Jy  sigma=1.358267
! Fit after  self-cal, rms=0.063498Jy  sigma=1.358189
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.83421e-05 Jy
! Component: 100  -  total flux cleaned = -7.9465e-05 Jy
! Component: 150  -  total flux cleaned = -9.85515e-05 Jy
! Component: 200  -  total flux cleaned = -0.000116826 Jy
! Total flux subtracted in 200 components = -0.000116826 Jy
! Clean residual min=-0.001707 max=0.001694 Jy/beam
! Clean residual mean=0.000002 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.195135 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.195135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063484Jy  sigma=1.357947
! Fit after  self-cal, rms=0.063485Jy  sigma=1.357885
! Inverting map 
! Added new window around map position (7, 9.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135365 Jy
! Component: 100  -  total flux cleaned = 0.00157573 Jy
! Component: 150  -  total flux cleaned = 0.00168276 Jy
! Component: 200  -  total flux cleaned = 0.00173021 Jy
! Total flux subtracted in 200 components = 0.00173021 Jy
! Clean residual min=-0.001591 max=0.001441 Jy/beam
! Clean residual mean=0.000001 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.196865 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.196865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063445Jy  sigma=1.357059
! Fit after  self-cal, rms=0.063443Jy  sigma=1.357010
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063443Jy  sigma=1.357010
! Fit after  self-cal, rms=0.063123Jy  sigma=1.355670
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.072 mas, bmaj=3.471 mas, bpa=-86.34 degrees
! Estimated noise=0.274267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.1964e-05 Jy
! Component: 100  -  total flux cleaned = -8.89104e-05 Jy
! Component: 150  -  total flux cleaned = -0.000117809 Jy
! Component: 200  -  total flux cleaned = -0.00010527 Jy
! Total flux subtracted in 200 components = -0.00010527 Jy
! Clean residual min=-0.001544 max=0.001606 Jy/beam
! Clean residual mean=0.000000 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.19676 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 78 components and 0.19676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063124Jy  sigma=1.355609
! Fit after  self-cal, rms=0.063124Jy  sigma=1.355580
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.16487e-05 Jy
! Component: 100  -  total flux cleaned = 9.63846e-05 Jy
! Component: 150  -  total flux cleaned = 0.000107332 Jy
! Component: 200  -  total flux cleaned = 0.000117757 Jy
! Total flux subtracted in 200 components = 0.000117757 Jy
! Clean residual min=-0.001515 max=0.001587 Jy/beam
! Clean residual mean=-0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.196878 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 79 components and 0.196878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063128Jy  sigma=1.355623
! Fit after  self-cal, rms=0.063127Jy  sigma=1.355611
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8926 mas, bmaj=1.735 mas, bpa=-79.87 degrees
! Estimated noise=0.216738 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8926 x 1.735 at -79.87 degrees (North through East)
! Clean map  min=-0.0013734  max=0.096053 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6648 mas, bmaj=1.324 mas, bpa=-78.27 degrees
! Estimated noise=0.502405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.084879 Jy
! Component: 100  -  total flux cleaned = 0.123424 Jy
! Component: 150  -  total flux cleaned = 0.146599 Jy
! Component: 200  -  total flux cleaned = 0.161273 Jy
! Total flux subtracted in 200 components = 0.161273 Jy
! Clean residual min=-0.005073 max=0.007822 Jy/beam
! Clean residual mean=-0.000004 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.161273 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.161273 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8926 mas, bmaj=1.735 mas, bpa=-79.87 degrees
! Estimated noise=0.216738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144849 Jy
! Component: 100  -  total flux cleaned = 0.0220828 Jy
! Component: 150  -  total flux cleaned = 0.0264666 Jy
! Component: 200  -  total flux cleaned = 0.0293166 Jy
! Total flux subtracted in 200 components = 0.0293166 Jy
! Clean residual min=-0.001794 max=0.002705 Jy/beam
! Clean residual mean=-0.000001 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.190589 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 40 components and 0.190589 Jy
! Inverting map 
! Added new window around map position (-2.2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00263832 Jy
! Component: 100  -  total flux cleaned = 0.00426235 Jy
! Component: 150  -  total flux cleaned = 0.00544114 Jy
! Component: 200  -  total flux cleaned = 0.00584689 Jy
! Total flux subtracted in 200 components = 0.00584689 Jy
! Clean residual min=-0.001581 max=0.001295 Jy/beam
! Clean residual mean=0.000000 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.196436 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 62 components and 0.196436 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.072 mas, bmaj=3.471 mas, bpa=-86.34 degrees
! Estimated noise=0.274267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000928461 Jy
! Component: 100  -  total flux cleaned = 0.00137787 Jy
! Component: 150  -  total flux cleaned = 0.00151706 Jy
! Component: 200  -  total flux cleaned = 0.00162754 Jy
! Total flux subtracted in 200 components = 0.00162754 Jy
! Clean residual min=-0.001337 max=0.001513 Jy/beam
! Clean residual mean=0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.198064 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.84517e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112812 Jy
! Component: 150  -  total flux cleaned = 0.00011985 Jy
! Component: 200  -  total flux cleaned = 0.000126196 Jy
! Total flux subtracted in 200 components = 0.000126196 Jy
! Clean residual min=-0.001333 max=0.001523 Jy/beam
! Clean residual mean=0.000001 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.19819 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 91 components and 0.19819 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8926 mas, bmaj=1.735 mas, bpa=-79.87 degrees
! Estimated noise=0.216738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000313722 Jy
! Component: 100  -  total flux cleaned = -0.000367925 Jy
! Component: 150  -  total flux cleaned = -0.000392118 Jy
! Component: 200  -  total flux cleaned = -0.000368504 Jy
! Total flux subtracted in 200 components = -0.000368504 Jy
! Clean residual min=-0.001509 max=0.001199 Jy/beam
! Clean residual mean=0.000001 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.197822 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 104 components and 0.197822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063056Jy  sigma=1.354186
! Fit after  self-cal, rms=0.063046Jy  sigma=1.353833
wmodel /J0701+6936_X_map.mod
! wmodel: Unable to open new model file: /J0701+6936_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0701+6936_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8926 x 1.735 at -79.87 degrees (North through East)
! Clean map  min=-0.0012803  max=0.095593 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0701+6936_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0955927 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000301609 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.946545 0.946545 1.89309 3.78618 7.57236 15.1447 30.2894 60.5789
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.095 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  316.942 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0701+6936_X_dfm.log closed on Thu May 19 20:07:49 2016