! Started logfile: /scr/pima/bg219b_uvs/J0651-2101_S_dfm.log on Thu May 19 20:07:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J0651-2101_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0651-2101_S_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.897817 visibilities/baseline/integration-bin.
! Found source: J0651-2101
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3620 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0651-2101_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022739Jy  sigma=18.354544
! Fit after  self-cal, rms=0.785846Jy  sigma=14.145577
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.264 mas, bmaj=12.19 mas, bpa=15.12 degrees
! Estimated noise=0.925423 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167969 Jy
! Component: 100  -  total flux cleaned = 0.204599 Jy
! Total flux subtracted in 100 components = 0.204599 Jy
! Clean residual min=-0.008352 max=0.010591 Jy/beam
! Clean residual mean=0.000007 rms=0.002353 Jy/beam
! Combined flux in latest and established models = 0.204599 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.204599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081174Jy  sigma=1.392209
! Fit after  self-cal, rms=0.081165Jy  sigma=1.392148
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.93 mas, bmaj=13.6 mas, bpa=14.59 degrees
! Estimated noise=0.73656 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109894 Jy
! Component: 100  -  total flux cleaned = 0.0159663 Jy
! Component: 150  -  total flux cleaned = 0.0172946 Jy
! Component: 200  -  total flux cleaned = 0.0172911 Jy
! Total flux subtracted in 200 components = 0.0172911 Jy
! Clean residual min=-0.007367 max=0.010796 Jy/beam
! Clean residual mean=0.000016 rms=0.002459 Jy/beam
! Combined flux in latest and established models = 0.22189 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 34 components and 0.22189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079555Jy  sigma=1.370270
! Fit after  self-cal, rms=0.079554Jy  sigma=1.370199
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.93 x 13.6 at 14.59 degrees (North through East)
! Clean map  min=-0.0073572  max=0.21732 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.079554Jy  sigma=1.370199
! Fit after  self-cal, rms=0.079554Jy  sigma=1.370199
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.93 mas, bmaj=13.6 mas, bpa=14.59 degrees
! Estimated noise=0.73656 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.59629e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147317 Jy
! Component: 150  -  total flux cleaned = 0.000151217 Jy
! Component: 200  -  total flux cleaned = 0.000207223 Jy
! Total flux subtracted in 200 components = 0.000207223 Jy
! Clean residual min=-0.007436 max=0.010598 Jy/beam
! Clean residual mean=0.000019 rms=0.002453 Jy/beam
! Combined flux in latest and established models = 0.222098 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 54 components and 0.222098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079453Jy  sigma=1.368801
! Fit after  self-cal, rms=0.079451Jy  sigma=1.368770
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079451Jy  sigma=1.368770
! Fit after  self-cal, rms=0.079451Jy  sigma=1.368770
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.93 mas, bmaj=13.6 mas, bpa=14.59 degrees
! Estimated noise=0.73656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.93917e-05 Jy
! Component: 100  -  total flux cleaned = 0.000101288 Jy
! Component: 150  -  total flux cleaned = 9.97905e-05 Jy
! Component: 200  -  total flux cleaned = 9.98968e-05 Jy
! Total flux subtracted in 200 components = 9.98968e-05 Jy
! Clean residual min=-0.007472 max=0.010487 Jy/beam
! Clean residual mean=0.000020 rms=0.002451 Jy/beam
! Combined flux in latest and established models = 0.222197 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 61 components and 0.222197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079408Jy  sigma=1.368266
! Fit after  self-cal, rms=0.079406Jy  sigma=1.368241
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (93, -92).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00943882 Jy
! Component: 100  -  total flux cleaned = 0.0144171 Jy
! Component: 150  -  total flux cleaned = 0.0169135 Jy
! Component: 200  -  total flux cleaned = 0.0180871 Jy
! Total flux subtracted in 200 components = 0.0180871 Jy
! Clean residual min=-0.007653 max=0.010030 Jy/beam
! Clean residual mean=0.000017 rms=0.002159 Jy/beam
! Combined flux in latest and established models = 0.240285 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 101 components and 0.240285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078333Jy  sigma=1.344203
! Fit after  self-cal, rms=0.078174Jy  sigma=1.340890
! Inverting map 
! Added new window around map position (-15.5, -81.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00845067 Jy
! Component: 100  -  total flux cleaned = 0.0115761 Jy
! Component: 150  -  total flux cleaned = 0.0140405 Jy
! Component: 200  -  total flux cleaned = 0.0162582 Jy
! Total flux subtracted in 200 components = 0.0162582 Jy
! Clean residual min=-0.006468 max=0.006959 Jy/beam
! Clean residual mean=0.000021 rms=0.001842 Jy/beam
! Combined flux in latest and established models = 0.256543 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 132 components and 0.256543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077225Jy  sigma=1.321112
! Fit after  self-cal, rms=0.077139Jy  sigma=1.320116
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077139Jy  sigma=1.320116
! Fit after  self-cal, rms=0.076866Jy  sigma=1.284952
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.924 mas, bmaj=13.62 mas, bpa=14.55 degrees
! Estimated noise=0.745396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122999 Jy
! Component: 100  -  total flux cleaned = 0.00123322 Jy
! Component: 150  -  total flux cleaned = 0.00107236 Jy
! Component: 200  -  total flux cleaned = 0.00113892 Jy
! Total flux subtracted in 200 components = 0.00113892 Jy
! Clean residual min=-0.004657 max=0.005013 Jy/beam
! Clean residual mean=0.000008 rms=0.001249 Jy/beam
! Combined flux in latest and established models = 0.257682 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 160 components and 0.257682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076619Jy  sigma=1.281661
! Fit after  self-cal, rms=0.076649Jy  sigma=1.281343
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267597 Jy
! Component: 100  -  total flux cleaned = 0.000520243 Jy
! Component: 150  -  total flux cleaned = 0.000757356 Jy
! Component: 200  -  total flux cleaned = 0.00103462 Jy
! Total flux subtracted in 200 components = 0.00103462 Jy
! Clean residual min=-0.004544 max=0.004837 Jy/beam
! Clean residual mean=0.000008 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.258716 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 174 components and 0.258716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076553Jy  sigma=1.280033
! Fit after  self-cal, rms=0.076550Jy  sigma=1.280006
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076550Jy  sigma=1.280006
! Fit after  self-cal, rms=0.076877Jy  sigma=1.279459
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.01 mas, bmaj=18.25 mas, bpa=5.188 degrees
! Estimated noise=0.859425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168866 Jy
! Component: 100  -  total flux cleaned = 0.00249505 Jy
! Component: 150  -  total flux cleaned = 0.00281289 Jy
! Component: 200  -  total flux cleaned = 0.00315271 Jy
! Total flux subtracted in 200 components = 0.00315271 Jy
! Clean residual min=-0.004310 max=0.005322 Jy/beam
! Clean residual mean=0.000009 rms=0.001540 Jy/beam
! Combined flux in latest and established models = 0.261869 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 190 components and 0.261869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076807Jy  sigma=1.278680
! Fit after  self-cal, rms=0.076800Jy  sigma=1.278595
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000237842 Jy
! Component: 100  -  total flux cleaned = 0.000512173 Jy
! Component: 150  -  total flux cleaned = 0.0005974 Jy
! Component: 200  -  total flux cleaned = 0.000595531 Jy
! Total flux subtracted in 200 components = 0.000595531 Jy
! Clean residual min=-0.004193 max=0.005237 Jy/beam
! Clean residual mean=0.000007 rms=0.001518 Jy/beam
! Combined flux in latest and established models = 0.262465 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 201 components and 0.262465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076784Jy  sigma=1.278202
! Fit after  self-cal, rms=0.076778Jy  sigma=1.278172
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.917 mas, bmaj=13.6 mas, bpa=14.58 degrees
! Estimated noise=0.748539 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.917 x 13.6 at 14.58 degrees (North through East)
! Clean map  min=-0.0043169  max=0.21881 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.255 mas, bmaj=12.19 mas, bpa=15.11 degrees
! Estimated noise=0.937551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170074 Jy
! Component: 100  -  total flux cleaned = 0.207181 Jy
! Component: 150  -  total flux cleaned = 0.219258 Jy
! Component: 200  -  total flux cleaned = 0.227453 Jy
! Total flux subtracted in 200 components = 0.227453 Jy
! Clean residual min=-0.006445 max=0.006592 Jy/beam
! Clean residual mean=0.000000 rms=0.001637 Jy/beam
! Combined flux in latest and established models = 0.227453 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.227453 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.917 mas, bmaj=13.6 mas, bpa=14.58 degrees
! Estimated noise=0.748539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00739442 Jy
! Component: 100  -  total flux cleaned = 0.0128377 Jy
! Component: 150  -  total flux cleaned = 0.0172506 Jy
! Component: 200  -  total flux cleaned = 0.0201918 Jy
! Total flux subtracted in 200 components = 0.0201918 Jy
! Clean residual min=-0.004950 max=0.004890 Jy/beam
! Clean residual mean=-0.000001 rms=0.001329 Jy/beam
! Combined flux in latest and established models = 0.247645 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 79 components and 0.247645 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.01 mas, bmaj=18.25 mas, bpa=5.188 degrees
! Estimated noise=0.859425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00317005 Jy
! Component: 100  -  total flux cleaned = 0.00535208 Jy
! Component: 150  -  total flux cleaned = 0.00704564 Jy
! Component: 200  -  total flux cleaned = 0.00848293 Jy
! Total flux subtracted in 200 components = 0.00848293 Jy
! Clean residual min=-0.004821 max=0.005120 Jy/beam
! Clean residual mean=0.000006 rms=0.001592 Jy/beam
! Combined flux in latest and established models = 0.256128 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119158 Jy
! Component: 100  -  total flux cleaned = 0.00212859 Jy
! Component: 150  -  total flux cleaned = 0.00297818 Jy
! Component: 200  -  total flux cleaned = 0.00370797 Jy
! Total flux subtracted in 200 components = 0.00370797 Jy
! Clean residual min=-0.004549 max=0.005226 Jy/beam
! Clean residual mean=0.000006 rms=0.001546 Jy/beam
! Combined flux in latest and established models = 0.259836 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 149 components and 0.259836 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.917 mas, bmaj=13.6 mas, bpa=14.58 degrees
! Estimated noise=0.748539 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000527961 Jy
! Component: 100  -  total flux cleaned = 0.000787725 Jy
! Component: 150  -  total flux cleaned = 0.000937316 Jy
! Component: 200  -  total flux cleaned = 0.0010108 Jy
! Total flux subtracted in 200 components = 0.0010108 Jy
! Clean residual min=-0.004308 max=0.004733 Jy/beam
! Clean residual mean=0.000005 rms=0.001202 Jy/beam
! Combined flux in latest and established models = 0.260847 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 172 components and 0.260847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076928Jy  sigma=1.280561
! Fit after  self-cal, rms=0.076904Jy  sigma=1.280219
wmodel /J0651-2101_S_map.mod
! wmodel: Unable to open new model file: /J0651-2101_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0651-2101_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.917 x 13.6 at 14.58 degrees (North through East)
! Clean map  min=-0.0041063  max=0.21764 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0651-2101_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.217644 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0012 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.65407 1.65407 3.30814 6.61629 13.2326 26.4652 52.9303
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0035 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.217 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  181.37 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0651-2101_S_dfm.log closed on Thu May 19 20:07:05 2016