! Started logfile: /scr/pima/bg219b_uvs/J0650-1637_S_uvs.log on Thu Apr  7 01:15:45 2016
obs /scr/pima/bg219b_uvs/J0650-1637_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0650-1637_S_uva.fits
! AN table 1: 18 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.858025 visibilities/baseline/integration-bin.
! Found source: J0650-1637
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2224 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J0650-1637_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.552026Jy  sigma=25.705342
! Fit after  self-cal, rms=1.316433Jy  sigma=13.067058
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.139 mas, bmaj=10.83 mas, bpa=16.44 degrees
! Estimated noise=2.30248 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.77719 Jy
! Component: 100  -  total flux cleaned = 2.16481 Jy
! Total flux subtracted in 100 components = 2.16481 Jy
! Clean residual min=-0.067996 max=0.112803 Jy/beam
! Clean residual mean=0.000113 rms=0.021134 Jy/beam
! Combined flux in latest and established models = 2.16481 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 2.16481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.330773Jy  sigma=3.175486
! Fit after  self-cal, rms=0.330740Jy  sigma=3.175132
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.719 mas, bmaj=11.59 mas, bpa=15.29 degrees
! Estimated noise=1.82861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139887 Jy
! Component: 100  -  total flux cleaned = 0.205136 Jy
! Component: 150  -  total flux cleaned = 0.218847 Jy
! Component: 200  -  total flux cleaned = 0.217735 Jy
! Total flux subtracted in 200 components = 0.217735 Jy
! Clean residual min=-0.051595 max=0.079482 Jy/beam
! Clean residual mean=0.000151 rms=0.017340 Jy/beam
! Combined flux in latest and established models = 2.38255 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 2.38255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.286886Jy  sigma=2.437060
! Fit after  self-cal, rms=0.286347Jy  sigma=2.427138
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.719 x 11.59 at 15.29 degrees (North through East)
! Clean map  min=-0.050595  max=2.3154 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.286347Jy  sigma=2.427138
! Fit after  self-cal, rms=0.286347Jy  sigma=2.427138
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.719 mas, bmaj=11.59 mas, bpa=15.29 degrees
! Estimated noise=1.82861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277263 Jy
! Component: 100  -  total flux cleaned = 0.00119338 Jy
! Component: 150  -  total flux cleaned = -0.00158673 Jy
! Component: 200  -  total flux cleaned = -0.00406462 Jy
! Total flux subtracted in 200 components = -0.00406462 Jy
! Clean residual min=-0.049401 max=0.076563 Jy/beam
! Clean residual mean=0.000150 rms=0.016894 Jy/beam
! Combined flux in latest and established models = 2.37848 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 2.37849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.283214Jy  sigma=2.385688
! Fit after  self-cal, rms=0.283237Jy  sigma=2.385065
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.283237Jy  sigma=2.385065
! Fit after  self-cal, rms=0.283237Jy  sigma=2.385065
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.719 mas, bmaj=11.59 mas, bpa=15.29 degrees
! Estimated noise=1.82861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00287546 Jy
! Component: 100  -  total flux cleaned = -0.00553069 Jy
! Component: 150  -  total flux cleaned = -0.00846496 Jy
! Component: 200  -  total flux cleaned = -0.0107168 Jy
! Total flux subtracted in 200 components = -0.0107168 Jy
! Clean residual min=-0.048793 max=0.075336 Jy/beam
! Clean residual mean=0.000153 rms=0.016724 Jy/beam
! Combined flux in latest and established models = 2.36777 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 39 components and 2.36777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.281489Jy  sigma=2.371479
! Fit after  self-cal, rms=0.281517Jy  sigma=2.371275
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, -87.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0672352 Jy
! Component: 100  -  total flux cleaned = 0.107329 Jy
! Component: 150  -  total flux cleaned = 0.12975 Jy
! Component: 200  -  total flux cleaned = 0.133885 Jy
! Total flux subtracted in 200 components = 0.133885 Jy
! Clean residual min=-0.045544 max=0.073836 Jy/beam
! Clean residual mean=0.000097 rms=0.014674 Jy/beam
! Combined flux in latest and established models = 2.50165 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 69 components and 2.50165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.260854Jy  sigma=2.169031
! Fit after  self-cal, rms=0.258657Jy  sigma=2.134067
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.258657Jy  sigma=2.134067
! Fit after  self-cal, rms=0.256847Jy  sigma=2.064640
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.721 mas, bmaj=11.59 mas, bpa=15.27 degrees
! Estimated noise=1.83446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0334027 Jy
! Component: 100  -  total flux cleaned = 0.0378174 Jy
! Component: 150  -  total flux cleaned = 0.0386112 Jy
! Component: 200  -  total flux cleaned = 0.0393084 Jy
! Total flux subtracted in 200 components = 0.0393084 Jy
! Clean residual min=-0.040643 max=0.054073 Jy/beam
! Clean residual mean=0.000100 rms=0.012466 Jy/beam
! Combined flux in latest and established models = 2.54096 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 108 components and 2.54096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.249721Jy  sigma=2.006744
! Fit after  self-cal, rms=0.249398Jy  sigma=1.996799
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124802 Jy
! Component: 100  -  total flux cleaned = 0.0132048 Jy
! Component: 150  -  total flux cleaned = 0.0131891 Jy
! Component: 200  -  total flux cleaned = 0.0131767 Jy
! Total flux subtracted in 200 components = 0.0131767 Jy
! Clean residual min=-0.039475 max=0.048413 Jy/beam
! Clean residual mean=0.000103 rms=0.011977 Jy/beam
! Combined flux in latest and established models = 2.55414 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 130 components and 2.55414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.245494Jy  sigma=1.972506
! Fit after  self-cal, rms=0.245557Jy  sigma=1.968841
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.245557Jy  sigma=1.968841
! Fit after  self-cal, rms=0.245032Jy  sigma=1.966593
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.276 mas, bmaj=15.54 mas, bpa=4.453 degrees
! Estimated noise=2.26047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00856856 Jy
! Component: 100  -  total flux cleaned = 0.00631584 Jy
! Component: 150  -  total flux cleaned = 0.00566517 Jy
! Component: 200  -  total flux cleaned = 0.00510568 Jy
! Total flux subtracted in 200 components = 0.00510568 Jy
! Clean residual min=-0.057433 max=0.064357 Jy/beam
! Clean residual mean=0.000181 rms=0.017584 Jy/beam
! Combined flux in latest and established models = 2.55924 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 158 components and 2.55924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.242604Jy  sigma=1.952572
! Fit after  self-cal, rms=0.242824Jy  sigma=1.949547
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00502386 Jy
! Component: 100  -  total flux cleaned = 0.00555573 Jy
! Component: 150  -  total flux cleaned = 0.00649836 Jy
! Component: 200  -  total flux cleaned = 0.00692759 Jy
! Total flux subtracted in 200 components = 0.00692759 Jy
! Clean residual min=-0.056091 max=0.061715 Jy/beam
! Clean residual mean=0.000181 rms=0.017133 Jy/beam
! Combined flux in latest and established models = 2.56617 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 180 components and 2.56617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.241627Jy  sigma=1.945092
! Fit after  self-cal, rms=0.241803Jy  sigma=1.943039
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.722 mas, bmaj=11.59 mas, bpa=15.27 degrees
! Estimated noise=1.83535 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.722 x 11.59 at 15.27 degrees (North through East)
! Clean map  min=-0.063304  max=2.3168 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.241803Jy  sigma=1.943039
! Fit after  self-cal, rms=0.221482Jy  sigma=1.754495
! Inverting map and beam 
! Estimated beam: bmin=3.726 mas, bmaj=11.59 mas, bpa=15.23 degrees
! Estimated noise=1.83272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00475267 Jy
! Component: 100  -  total flux cleaned = -0.00626395 Jy
! Component: 150  -  total flux cleaned = -0.00690839 Jy
! Component: 200  -  total flux cleaned = -0.00806283 Jy
! Total flux subtracted in 200 components = -0.00806283 Jy
! Clean residual min=-0.036117 max=0.039928 Jy/beam
! Clean residual mean=0.000071 rms=0.009922 Jy/beam
! Combined flux in latest and established models = 2.55811 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 204 components and 2.55811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219714Jy  sigma=1.749624
! Fit after  self-cal, rms=0.219756Jy  sigma=1.749019
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00229169 Jy
! Component: 100  -  total flux cleaned = 0.000973653 Jy
! Component: 150  -  total flux cleaned = 0.000251481 Jy
! Component: 200  -  total flux cleaned = -0.000658271 Jy
! Total flux subtracted in 200 components = -0.000658271 Jy
! Clean residual min=-0.036252 max=0.040012 Jy/beam
! Clean residual mean=0.000072 rms=0.009878 Jy/beam
! Combined flux in latest and established models = 2.55745 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 218 components and 2.55745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219080Jy  sigma=1.745429
! Fit after  self-cal, rms=0.219125Jy  sigma=1.745111
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219125Jy  sigma=1.745111
! Fit after  self-cal, rms=0.210737Jy  sigma=1.673883
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.149 mas, bmaj=10.84 mas, bpa=16.39 degrees
! Estimated noise=2.30191 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.77531 Jy
! Component: 100  -  total flux cleaned = 2.16526 Jy
! Component: 150  -  total flux cleaned = 2.29874 Jy
! Component: 200  -  total flux cleaned = 2.384 Jy
! Total flux subtracted in 200 components = 2.384 Jy
! Clean residual min=-0.050190 max=0.057352 Jy/beam
! Clean residual mean=0.000074 rms=0.013131 Jy/beam
! Combined flux in latest and established models = 2.384 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 2.384 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.726 mas, bmaj=11.59 mas, bpa=15.23 degrees
! Estimated noise=1.8306 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.5, -4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0771115 Jy
! Component: 100  -  total flux cleaned = 0.126889 Jy
! Component: 150  -  total flux cleaned = 0.146992 Jy
! Component: 200  -  total flux cleaned = 0.157307 Jy
! Total flux subtracted in 200 components = 0.157307 Jy
! Clean residual min=-0.035516 max=0.047382 Jy/beam
! Clean residual mean=0.000101 rms=0.010783 Jy/beam
! Combined flux in latest and established models = 2.54131 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 56 components and 2.54131 Jy
! Inverting map 
! Added new window around map position (7, -49.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0340145 Jy
! Component: 100  -  total flux cleaned = 0.0429585 Jy
! Component: 150  -  total flux cleaned = 0.0486325 Jy
! Component: 200  -  total flux cleaned = 0.0512748 Jy
! Total flux subtracted in 200 components = 0.0512748 Jy
! Clean residual min=-0.030638 max=0.038620 Jy/beam
! Clean residual mean=0.000098 rms=0.009536 Jy/beam
! Combined flux in latest and established models = 2.59258 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 92 components and 2.59258 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.276 mas, bmaj=15.54 mas, bpa=4.409 degrees
! Estimated noise=2.25289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00238345 Jy
! Component: 100  -  total flux cleaned = -0.00490077 Jy
! Component: 150  -  total flux cleaned = -0.00783694 Jy
! Component: 200  -  total flux cleaned = -0.00850841 Jy
! Total flux subtracted in 200 components = -0.00850841 Jy
! Clean residual min=-0.039170 max=0.046825 Jy/beam
! Clean residual mean=0.000162 rms=0.012860 Jy/beam
! Combined flux in latest and established models = 2.58407 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.65511e-05 Jy
! Component: 100  -  total flux cleaned = -0.000596832 Jy
! Component: 150  -  total flux cleaned = -0.000590787 Jy
! Component: 200  -  total flux cleaned = -0.000586766 Jy
! Total flux subtracted in 200 components = -0.000586766 Jy
! Clean residual min=-0.038248 max=0.044764 Jy/beam
! Clean residual mean=0.000167 rms=0.012397 Jy/beam
! Combined flux in latest and established models = 2.58349 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 138 components and 2.58349 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.726 mas, bmaj=11.59 mas, bpa=15.23 degrees
! Estimated noise=1.8306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267827 Jy
! Component: 100  -  total flux cleaned = 0.00318996 Jy
! Component: 150  -  total flux cleaned = 0.00367408 Jy
! Component: 200  -  total flux cleaned = 0.00412161 Jy
! Total flux subtracted in 200 components = 0.00412161 Jy
! Clean residual min=-0.028485 max=0.033568 Jy/beam
! Clean residual mean=0.000105 rms=0.008470 Jy/beam
! Combined flux in latest and established models = 2.58761 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 163 components and 2.58761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203311Jy  sigma=1.629864
! Fit after  self-cal, rms=0.201682Jy  sigma=1.613893
wmodel /scr/pima/bg219b_uvs/J0650-1637_S_map.mod
! Writing 163 model components to file: /scr/pima/bg219b_uvs/J0650-1637_S_map.mod
wobs /scr/pima/bg219b_uvs/J0650-1637_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J0650-1637_S_uvs.fits
wwins /scr/pima/bg219b_uvs/J0650-1637_S_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219b_uvs/J0650-1637_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00883656 Jy
! Component: 100  -  total flux cleaned = 0.0114586 Jy
! Component: 150  -  total flux cleaned = 0.0134448 Jy
! Component: 200  -  total flux cleaned = 0.0143927 Jy
! Component: 250  -  total flux cleaned = 0.0148483 Jy
! Component: 300  -  total flux cleaned = 0.0144207 Jy
! Component: 350  -  total flux cleaned = 0.0144201 Jy
! Component: 400  -  total flux cleaned = 0.0152172 Jy
! Component: 450  -  total flux cleaned = 0.0155945 Jy
! Component: 500  -  total flux cleaned = 0.0155929 Jy
! Component: 550  -  total flux cleaned = 0.0170446 Jy
! Component: 600  -  total flux cleaned = 0.0177383 Jy
! Component: 650  -  total flux cleaned = 0.0180829 Jy
! Component: 700  -  total flux cleaned = 0.0200889 Jy
! Component: 750  -  total flux cleaned = 0.0217184 Jy
! Component: 800  -  total flux cleaned = 0.0236224 Jy
! Component: 850  -  total flux cleaned = 0.0251809 Jy
! Component: 900  -  total flux cleaned = 0.027617 Jy
! Component: 950  -  total flux cleaned = 0.030292 Jy
! Component: 1000  -  total flux cleaned = 0.0314581 Jy
! Component: 1050  -  total flux cleaned = 0.0331726 Jy
! Component: 1100  -  total flux cleaned = 0.0340131 Jy
! Component: 1150  -  total flux cleaned = 0.0348432 Jy
! Component: 1200  -  total flux cleaned = 0.0353907 Jy
! Component: 1250  -  total flux cleaned = 0.0361852 Jy
! Component: 1300  -  total flux cleaned = 0.0364456 Jy
! Component: 1350  -  total flux cleaned = 0.0361888 Jy
! Component: 1400  -  total flux cleaned = 0.0366978 Jy
! Component: 1450  -  total flux cleaned = 0.0364493 Jy
! Component: 1500  -  total flux cleaned = 0.035956 Jy
! Component: 1550  -  total flux cleaned = 0.0357118 Jy
! Component: 1600  -  total flux cleaned = 0.0359522 Jy
! Component: 1650  -  total flux cleaned = 0.0354779 Jy
! Component: 1700  -  total flux cleaned = 0.0354746 Jy
! Component: 1750  -  total flux cleaned = 0.0357047 Jy
! Component: 1800  -  total flux cleaned = 0.0357079 Jy
! Component: 1850  -  total flux cleaned = 0.0361607 Jy
! Component: 1900  -  total flux cleaned = 0.0359387 Jy
! Component: 1950  -  total flux cleaned = 0.0368157 Jy
! Component: 2000  -  total flux cleaned = 0.0361643 Jy
! Component: 2050  -  total flux cleaned = 0.03638 Jy
! Component: 2100  -  total flux cleaned = 0.0368027 Jy
! Component: 2150  -  total flux cleaned = 0.0365897 Jy
! Component: 2200  -  total flux cleaned = 0.0363846 Jy
! Component: 2250  -  total flux cleaned = 0.0363869 Jy
! Component: 2300  -  total flux cleaned = 0.0361867 Jy
! Component: 2350  -  total flux cleaned = 0.0363867 Jy
! Component: 2400  -  total flux cleaned = 0.0359883 Jy
! Component: 2450  -  total flux cleaned = 0.0357918 Jy
! Component: 2500  -  total flux cleaned = 0.0359886 Jy
! Component: 2550  -  total flux cleaned = 0.0357944 Jy
! Component: 2600  -  total flux cleaned = 0.0359846 Jy
! Component: 2650  -  total flux cleaned = 0.0357936 Jy
! Component: 2700  -  total flux cleaned = 0.0348522 Jy
! Component: 2750  -  total flux cleaned = 0.0350399 Jy
! Component: 2800  -  total flux cleaned = 0.0348524 Jy
! Component: 2850  -  total flux cleaned = 0.0346677 Jy
! Component: 2900  -  total flux cleaned = 0.0344851 Jy
! Component: 2950  -  total flux cleaned = 0.0343036 Jy
! Component: 3000  -  total flux cleaned = 0.0339454 Jy
! Component: 3050  -  total flux cleaned = 0.0335919 Jy
! Component: 3100  -  total flux cleaned = 0.0330659 Jy
! Component: 3150  -  total flux cleaned = 0.0332407 Jy
! Component: 3200  -  total flux cleaned = 0.0330682 Jy
! Component: 3250  -  total flux cleaned = 0.0332377 Jy
! Component: 3300  -  total flux cleaned = 0.0325569 Jy
! Component: 3350  -  total flux cleaned = 0.0320527 Jy
! Component: 3400  -  total flux cleaned = 0.0323886 Jy
! Component: 3450  -  total flux cleaned = 0.0313892 Jy
! Component: 3500  -  total flux cleaned = 0.0317178 Jy
! Component: 3550  -  total flux cleaned = 0.0304053 Jy
! Component: 3600  -  total flux cleaned = 0.0299165 Jy
! Component: 3650  -  total flux cleaned = 0.0292694 Jy
! Component: 3700  -  total flux cleaned = 0.0284646 Jy
! Component: 3750  -  total flux cleaned = 0.0281459 Jy
! Component: 3800  -  total flux cleaned = 0.0279877 Jy
! Component: 3850  -  total flux cleaned = 0.0278307 Jy
! Component: 3900  -  total flux cleaned = 0.0267389 Jy
! Component: 3950  -  total flux cleaned = 0.0268941 Jy
! Component: 4000  -  total flux cleaned = 0.0258148 Jy
! Component: 4050  -  total flux cleaned = 0.0261219 Jy
! Total flux subtracted in 4096 components = 0.0264259 Jy
! Clean residual min=-0.008952 max=0.008359 Jy/beam
! Clean residual mean=0.000062 rms=0.003159 Jy/beam
! Combined flux in latest and established models = 2.61404 Jy
keep
! Adding 382 model components to the UV plane model.
! The established model now contains 545 components and 2.61404 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J0650-1637_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.726 x 11.59 at 15.23 degrees (North through East)
! Clean map  min=-0.039449  max=2.2664 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0650-1637_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.26638 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00320641 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.42443 0.42443 0.848861 1.69772 3.39544 6.79088 13.5818 27.1635 54.3271
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0096 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.266 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  706.829 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0650-1637_S_uvs.log closed on Thu Apr  7 01:15:49 2016