! Started logfile: /scr/pima/bg219b_uvs/J0650+6001_X_dfm.log on Thu May 19 20:06:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0650+6001_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0650+6001_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.771429 visibilities/baseline/integration-bin.
! Found source: J0650+6001
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11664 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0650+6001_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.272874Jy  sigma=23.246567
! Fit after  self-cal, rms=0.341877Jy  sigma=6.686651
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7279 mas, bmaj=1.412 mas, bpa=-66.13 degrees
! Estimated noise=0.727504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.525611 Jy
! Component: 100  -  total flux cleaned = 0.6767 Jy
! Total flux subtracted in 100 components = 0.6767 Jy
! Clean residual min=-0.038178 max=0.125503 Jy/beam
! Clean residual mean=-0.000125 rms=0.010436 Jy/beam
! Combined flux in latest and established models = 0.6767 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.6767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.234997Jy  sigma=4.094115
! Fit after  self-cal, rms=0.234828Jy  sigma=4.093015
! Inverting map 
! Added new window around map position (-1.6, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108716 Jy
! Component: 100  -  total flux cleaned = 0.168927 Jy
! Total flux subtracted in 100 components = 0.168927 Jy
! Clean residual min=-0.027099 max=0.036701 Jy/beam
! Clean residual mean=-0.000038 rms=0.006427 Jy/beam
! Combined flux in latest and established models = 0.845627 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.845627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.156745Jy  sigma=2.741458
! Fit after  self-cal, rms=0.152857Jy  sigma=2.644529
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0467302 Jy
! Component: 100  -  total flux cleaned = 0.0776686 Jy
! Total flux subtracted in 100 components = 0.0776686 Jy
! Clean residual min=-0.019993 max=0.027186 Jy/beam
! Clean residual mean=0.000002 rms=0.004927 Jy/beam
! Combined flux in latest and established models = 0.923295 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 31 components and 0.923295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.129087Jy  sigma=2.218774
! Fit after  self-cal, rms=0.128293Jy  sigma=2.197772
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9316 mas, bmaj=1.647 mas, bpa=-70.39 degrees
! Estimated noise=0.403639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0373268 Jy
! Component: 100  -  total flux cleaned = 0.0611392 Jy
! Component: 150  -  total flux cleaned = 0.0775753 Jy
! Component: 200  -  total flux cleaned = 0.0892061 Jy
! Total flux subtracted in 200 components = 0.0892061 Jy
! Clean residual min=-0.017251 max=0.029422 Jy/beam
! Clean residual mean=0.000200 rms=0.005114 Jy/beam
! Combined flux in latest and established models = 1.0125 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 43 components and 1.0125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115251Jy  sigma=1.935458
! Fit after  self-cal, rms=0.114713Jy  sigma=1.922855
! Inverting map 
! Added new window around map position (-6.4, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0251422 Jy
! Component: 100  -  total flux cleaned = 0.0383434 Jy
! Component: 150  -  total flux cleaned = 0.0466432 Jy
! Component: 200  -  total flux cleaned = 0.0511469 Jy
! Total flux subtracted in 200 components = 0.0511469 Jy
! Clean residual min=-0.017235 max=0.020933 Jy/beam
! Clean residual mean=0.000176 rms=0.004345 Jy/beam
! Combined flux in latest and established models = 1.06365 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 64 components and 1.06365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107518Jy  sigma=1.818534
! Fit after  self-cal, rms=0.106932Jy  sigma=1.806586
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9316 x 1.647 at -70.39 degrees (North through East)
! Clean map  min=-0.016639  max=0.68711 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.00     KP        0.95     
!   LA        0.97     MK        0.93     NL        1.03     OV        0.96     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        0.98     
!   LA        0.98     MK        0.98     NL        1.05     OV        1.00     
!   PT        1.07     SC        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.03     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.05     OV        1.00     
!   PT        1.08     SC        1.11     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.98     KP        0.96     
!   LA        0.97     MK        0.97     NL        1.02     OV        0.97     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.99     KP        0.98     
!   LA        0.97     MK        0.96     NL        1.00     OV        0.98     
!   PT        1.05     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.05     OV        0.96     
!   PT        1.10     SC        1.08     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.01     MK        1.04     NL        1.05     OV        0.98     
!   PT        1.08     SC        1.13     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.96     MK        1.01     NL        1.02     OV        0.97     
!   PT        1.05     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.98     KP        0.97     
!   LA        0.96     MK        1.02     NL        1.06     OV        0.97     
!   PT        1.07     SC        1.10     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.96     KP        0.96     
!   LA        0.95     MK        0.99     NL        1.01     OV        0.94     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        0.98     KP        0.94     
!   LA        0.94     MK        0.99     NL        1.01     OV        0.95     
!   PT        1.05     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.94     HN        0.94     KP        0.94     
!   LA        0.95     MK        0.97     NL        0.97     OV        0.91     
!   PT        0.98     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.106932Jy  sigma=1.806586
! Fit after  self-cal, rms=0.094837Jy  sigma=1.573900
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.938 mas, bmaj=1.66 mas, bpa=-69.84 degrees
! Estimated noise=0.403532 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00558799 Jy
! Component: 100  -  total flux cleaned = 0.00732642 Jy
! Component: 150  -  total flux cleaned = 0.00802768 Jy
! Component: 200  -  total flux cleaned = 0.00882464 Jy
! Total flux subtracted in 200 components = 0.00882464 Jy
! Clean residual min=-0.013385 max=0.014133 Jy/beam
! Clean residual mean=0.000137 rms=0.003426 Jy/beam
! Combined flux in latest and established models = 1.07247 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 82 components and 1.07247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092957Jy  sigma=1.548676
! Fit after  self-cal, rms=0.092876Jy  sigma=1.546387
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092876Jy  sigma=1.546387
! Fit after  self-cal, rms=0.077885Jy  sigma=1.331763
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9355 mas, bmaj=1.653 mas, bpa=-70.32 degrees
! Estimated noise=0.405314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00394443 Jy
! Component: 100  -  total flux cleaned = -0.00453046 Jy
! Component: 150  -  total flux cleaned = -0.00520656 Jy
! Component: 200  -  total flux cleaned = -0.0060956 Jy
! Total flux subtracted in 200 components = -0.0060956 Jy
! Clean residual min=-0.007884 max=0.008536 Jy/beam
! Clean residual mean=-0.000020 rms=0.001594 Jy/beam
! Combined flux in latest and established models = 1.06638 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 97 components and 1.06638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076788Jy  sigma=1.310812
! Fit after  self-cal, rms=0.076695Jy  sigma=1.309134
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00788621 Jy
! Component: 100  -  total flux cleaned = 0.00970707 Jy
! Component: 150  -  total flux cleaned = 0.0097228 Jy
! Component: 200  -  total flux cleaned = 0.00917357 Jy
! Total flux subtracted in 200 components = 0.00917357 Jy
! Clean residual min=-0.006920 max=0.006807 Jy/beam
! Clean residual mean=-0.000003 rms=0.001404 Jy/beam
! Combined flux in latest and established models = 1.07555 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 116 components and 1.07555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075640Jy  sigma=1.289976
! Fit after  self-cal, rms=0.075573Jy  sigma=1.288554
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075573Jy  sigma=1.288554
! Fit after  self-cal, rms=0.075397Jy  sigma=1.283229
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9359 mas, bmaj=1.653 mas, bpa=-70.39 degrees
! Estimated noise=0.405517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000611403 Jy
! Component: 100  -  total flux cleaned = 0.000912084 Jy
! Component: 150  -  total flux cleaned = 0.000912033 Jy
! Component: 200  -  total flux cleaned = 0.00104109 Jy
! Total flux subtracted in 200 components = 0.00104109 Jy
! Clean residual min=-0.005791 max=0.006297 Jy/beam
! Clean residual mean=-0.000011 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 1.07659 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 125 components and 1.07659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074745Jy  sigma=1.272143
! Fit after  self-cal, rms=0.074723Jy  sigma=1.271653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00560921 Jy
! Component: 100  -  total flux cleaned = 0.00898321 Jy
! Component: 150  -  total flux cleaned = 0.0105726 Jy
! Component: 200  -  total flux cleaned = 0.0109015 Jy
! Total flux subtracted in 200 components = 0.0109015 Jy
! Clean residual min=-0.005957 max=0.004604 Jy/beam
! Clean residual mean=-0.000004 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 1.08749 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 142 components and 1.08749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074072Jy  sigma=1.261820
! Fit after  self-cal, rms=0.074064Jy  sigma=1.261443
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074064Jy  sigma=1.261443
! Fit after  self-cal, rms=0.073936Jy  sigma=1.259044
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.06 mas, bmaj=2.845 mas, bpa=-86.48 degrees
! Estimated noise=0.528031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000947827 Jy
! Component: 100  -  total flux cleaned = 0.00203679 Jy
! Component: 150  -  total flux cleaned = 0.00272429 Jy
! Component: 200  -  total flux cleaned = 0.00337114 Jy
! Total flux subtracted in 200 components = 0.00337114 Jy
! Clean residual min=-0.004766 max=0.005348 Jy/beam
! Clean residual mean=-0.000010 rms=0.001420 Jy/beam
! Combined flux in latest and established models = 1.09086 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 160 components and 1.09086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073703Jy  sigma=1.255749
! Fit after  self-cal, rms=0.073692Jy  sigma=1.255415
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.02476e-05 Jy
! Component: 100  -  total flux cleaned = 0.000367926 Jy
! Component: 150  -  total flux cleaned = 0.000686666 Jy
! Component: 200  -  total flux cleaned = 0.000973675 Jy
! Total flux subtracted in 200 components = 0.000973675 Jy
! Clean residual min=-0.004608 max=0.005208 Jy/beam
! Clean residual mean=-0.000005 rms=0.001370 Jy/beam
! Combined flux in latest and established models = 1.09184 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 172 components and 1.09184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073617Jy  sigma=1.254697
! Fit after  self-cal, rms=0.073612Jy  sigma=1.254566
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9366 mas, bmaj=1.652 mas, bpa=-70.51 degrees
! Estimated noise=0.405327 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9366 x 1.652 at -70.51 degrees (North through East)
! Clean map  min=-0.0047726  max=0.68917 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073612Jy  sigma=1.254566
! Fit after  self-cal, rms=0.067751Jy  sigma=1.139040
! Inverting map and beam 
! Estimated beam: bmin=0.9359 mas, bmaj=1.651 mas, bpa=-70.55 degrees
! Estimated noise=0.403371 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00441312 Jy
! Component: 100  -  total flux cleaned = -0.0054207 Jy
! Component: 150  -  total flux cleaned = -0.00583374 Jy
! Component: 200  -  total flux cleaned = -0.00630578 Jy
! Total flux subtracted in 200 components = -0.00630578 Jy
! Clean residual min=-0.004098 max=0.004074 Jy/beam
! Clean residual mean=-0.000002 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 1.08553 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 185 components and 1.08553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067329Jy  sigma=1.131151
! Fit after  self-cal, rms=0.067316Jy  sigma=1.130977
! Inverting map 
! Added new window around map position (9.4, -28.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324551 Jy
! Component: 100  -  total flux cleaned = 0.00406848 Jy
! Component: 150  -  total flux cleaned = 0.00440414 Jy
! Component: 200  -  total flux cleaned = 0.00448152 Jy
! Total flux subtracted in 200 components = 0.00448152 Jy
! Clean residual min=-0.003727 max=0.003815 Jy/beam
! Clean residual mean=-0.000001 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 1.09001 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 201 components and 1.09001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067015Jy  sigma=1.126141
! Fit after  self-cal, rms=0.066999Jy  sigma=1.125844
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066999Jy  sigma=1.125844
! Fit after  self-cal, rms=0.066780Jy  sigma=1.123551
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7311 mas, bmaj=1.416 mas, bpa=-66.38 degrees
! Estimated noise=0.727648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.523905 Jy
! Component: 100  -  total flux cleaned = 0.698649 Jy
! Component: 150  -  total flux cleaned = 0.796693 Jy
! Component: 200  -  total flux cleaned = 0.85747 Jy
! Total flux subtracted in 200 components = 0.85747 Jy
! Clean residual min=-0.015231 max=0.032732 Jy/beam
! Clean residual mean=-0.000091 rms=0.004317 Jy/beam
! Combined flux in latest and established models = 0.85747 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.85747 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9364 mas, bmaj=1.65 mas, bpa=-70.68 degrees
! Estimated noise=0.402338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0591023 Jy
! Component: 100  -  total flux cleaned = 0.0950957 Jy
! Component: 150  -  total flux cleaned = 0.1185 Jy
! Component: 200  -  total flux cleaned = 0.135268 Jy
! Total flux subtracted in 200 components = 0.135268 Jy
! Clean residual min=-0.007899 max=0.013078 Jy/beam
! Clean residual mean=-0.000057 rms=0.002047 Jy/beam
! Combined flux in latest and established models = 0.992739 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 37 components and 0.992739 Jy
! Inverting map 
! Added new window around map position (-0.8, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013696 Jy
! Component: 100  -  total flux cleaned = 0.0239312 Jy
! Component: 150  -  total flux cleaned = 0.032393 Jy
! Component: 200  -  total flux cleaned = 0.0395285 Jy
! Total flux subtracted in 200 components = 0.0395285 Jy
! Clean residual min=-0.005591 max=0.006776 Jy/beam
! Clean residual mean=-0.000027 rms=0.001307 Jy/beam
! Combined flux in latest and established models = 1.03227 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 68 components and 1.03227 Jy
! Inverting map 
! Added new window around map position (0.8, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00691913 Jy
! Component: 100  -  total flux cleaned = 0.0124646 Jy
! Component: 150  -  total flux cleaned = 0.0173401 Jy
! Component: 200  -  total flux cleaned = 0.0216679 Jy
! Total flux subtracted in 200 components = 0.0216679 Jy
! Clean residual min=-0.004630 max=0.004604 Jy/beam
! Clean residual mean=-0.000012 rms=0.001023 Jy/beam
! Combined flux in latest and established models = 1.05394 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 86 components and 1.05394 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=2.849 mas, bpa=-86.49 degrees
! Estimated noise=0.524271 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00619131 Jy
! Component: 100  -  total flux cleaned = 0.0110451 Jy
! Component: 150  -  total flux cleaned = 0.0150559 Jy
! Component: 200  -  total flux cleaned = 0.0184502 Jy
! Total flux subtracted in 200 components = 0.0184502 Jy
! Clean residual min=-0.004707 max=0.004632 Jy/beam
! Clean residual mean=-0.000005 rms=0.001340 Jy/beam
! Combined flux in latest and established models = 1.07239 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292951 Jy
! Component: 100  -  total flux cleaned = 0.00547716 Jy
! Component: 150  -  total flux cleaned = 0.007714 Jy
! Component: 200  -  total flux cleaned = 0.00954349 Jy
! Total flux subtracted in 200 components = 0.00954349 Jy
! Clean residual min=-0.004208 max=0.004019 Jy/beam
! Clean residual mean=0.000006 rms=0.001206 Jy/beam
! Combined flux in latest and established models = 1.08193 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 162 components and 1.08193 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9364 mas, bmaj=1.65 mas, bpa=-70.68 degrees
! Estimated noise=0.402338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191479 Jy
! Component: 100  -  total flux cleaned = 0.00239256 Jy
! Component: 150  -  total flux cleaned = 0.00281035 Jy
! Component: 200  -  total flux cleaned = 0.00320206 Jy
! Total flux subtracted in 200 components = 0.00320206 Jy
! Clean residual min=-0.003090 max=0.003158 Jy/beam
! Clean residual mean=0.000004 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 1.08513 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 187 components and 1.08513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066327Jy  sigma=1.115560
! Fit after  self-cal, rms=0.066253Jy  sigma=1.114147
wmodel /J0650+6001_X_map.mod
! wmodel: Unable to open new model file: /J0650+6001_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0650+6001_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9364 x 1.65 at -70.68 degrees (North through East)
! Clean map  min=-0.0028975  max=0.69082 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0650+6001_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.69082 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000761998 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.33091 0.33091 0.661821 1.32364 2.64728 5.29457 10.5891 21.1783 42.3565 84.7131
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.69 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  906.589 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0650+6001_X_dfm.log closed on Thu May 19 20:06:54 2016