! Started logfile: /scr/pima/bg219b_uvs/J0643-2451_X_dfm.log on Thu May 19 20:06:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0643-2451_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0643-2451_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.78487 visibilities/baseline/integration-bin.
! Found source: J0643-2451
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19920 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0643-2451_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020190Jy  sigma=21.875426
! Fit after  self-cal, rms=0.803966Jy  sigma=17.008849
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6032 mas, bmaj=1.632 mas, bpa=-4.712 degrees
! Estimated noise=0.432796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142772 Jy
! Component: 100  -  total flux cleaned = 0.18464 Jy
! Total flux subtracted in 100 components = 0.18464 Jy
! Clean residual min=-0.012364 max=0.024885 Jy/beam
! Clean residual mean=0.000016 rms=0.002853 Jy/beam
! Combined flux in latest and established models = 0.18464 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.18464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097320Jy  sigma=2.024180
! Fit after  self-cal, rms=0.097227Jy  sigma=2.022823
! Inverting map 
! Added new window around map position (-1, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0272942 Jy
! Component: 100  -  total flux cleaned = 0.0452386 Jy
! Total flux subtracted in 100 components = 0.0452386 Jy
! Clean residual min=-0.009879 max=0.012480 Jy/beam
! Clean residual mean=0.000009 rms=0.001893 Jy/beam
! Combined flux in latest and established models = 0.229879 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.229879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085265Jy  sigma=1.704925
! Fit after  self-cal, rms=0.084900Jy  sigma=1.698260
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013312 Jy
! Component: 100  -  total flux cleaned = 0.0223206 Jy
! Total flux subtracted in 100 components = 0.0223206 Jy
! Clean residual min=-0.008384 max=0.007634 Jy/beam
! Clean residual mean=0.000005 rms=0.001528 Jy/beam
! Combined flux in latest and established models = 0.2522 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.2522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081773Jy  sigma=1.610238
! Fit after  self-cal, rms=0.081627Jy  sigma=1.607366
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7784 mas, bmaj=1.992 mas, bpa=-3.972 degrees
! Estimated noise=0.241217 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011079 Jy
! Component: 100  -  total flux cleaned = 0.017412 Jy
! Component: 150  -  total flux cleaned = 0.0212125 Jy
! Component: 200  -  total flux cleaned = 0.0235322 Jy
! Total flux subtracted in 200 components = 0.0235322 Jy
! Clean residual min=-0.006236 max=0.011489 Jy/beam
! Clean residual mean=0.000008 rms=0.002070 Jy/beam
! Combined flux in latest and established models = 0.275732 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 45 components and 0.275732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080266Jy  sigma=1.567592
! Fit after  self-cal, rms=0.080152Jy  sigma=1.564527
! Inverting map 
! Added new window around map position (-14.2, -5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104646 Jy
! Component: 100  -  total flux cleaned = 0.0159902 Jy
! Component: 150  -  total flux cleaned = 0.0197707 Jy
! Component: 200  -  total flux cleaned = 0.0225724 Jy
! Total flux subtracted in 200 components = 0.0225724 Jy
! Clean residual min=-0.006581 max=0.009155 Jy/beam
! Clean residual mean=0.000005 rms=0.001688 Jy/beam
! Combined flux in latest and established models = 0.298304 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 81 components and 0.298304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078764Jy  sigma=1.531268
! Fit after  self-cal, rms=0.078666Jy  sigma=1.527368
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7784 x 1.992 at -3.972 degrees (North through East)
! Clean map  min=-0.0070625  max=0.19789 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.93     HN        1.17     KP        0.94     
!   LA        0.97     MK        0.96     NL        1.02     OV        0.96     
!   PT        1.18     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.19     KP        0.97     
!   LA        0.98     MK        1.02     NL        1.02     OV        1.00     
!   PT        1.19     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        1.08     KP        0.96     
!   LA        0.95     MK        0.98     NL        1.00     OV        0.95     
!   PT        1.20     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        1.13     KP        0.96     
!   LA        0.94     MK        0.96     NL        1.02     OV        0.97     
!   PT        1.14     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        1.12     KP        0.96     
!   LA        0.96     MK        1.00     NL        1.01     OV        0.93     
!   PT        1.19     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        1.04     KP        0.97     
!   LA        0.94     MK        1.00     NL        1.05     OV        0.98     
!   PT        1.19     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.93     HN        1.06     KP        0.95     
!   LA        0.93     MK        0.99     NL        0.97     OV        0.96     
!   PT        1.11     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.93     HN        1.07     KP        0.93     
!   LA        0.92     MK        1.00     NL        1.00     OV        0.96     
!   PT        1.16     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.90     HN        1.03     KP        0.94     
!   LA        0.91     MK        0.97     NL        0.95     OV        0.94     
!   PT        1.14     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.078666Jy  sigma=1.527368
! Fit after  self-cal, rms=0.077607Jy  sigma=1.471676
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7799 mas, bmaj=1.986 mas, bpa=-3.874 degrees
! Estimated noise=0.239576 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00311736 Jy
! Component: 100  -  total flux cleaned = -0.00503353 Jy
! Component: 150  -  total flux cleaned = -0.00637645 Jy
! Component: 200  -  total flux cleaned = -0.00691029 Jy
! Total flux subtracted in 200 components = -0.00691029 Jy
! Clean residual min=-0.004252 max=0.003628 Jy/beam
! Clean residual mean=0.000001 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.291394 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 101 components and 0.291394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077440Jy  sigma=1.468660
! Fit after  self-cal, rms=0.077526Jy  sigma=1.468291
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077526Jy  sigma=1.468291
! Fit after  self-cal, rms=0.077513Jy  sigma=1.456726
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7813 mas, bmaj=1.986 mas, bpa=-3.802 degrees
! Estimated noise=0.239669 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00225089 Jy
! Component: 100  -  total flux cleaned = -0.00348144 Jy
! Component: 150  -  total flux cleaned = -0.00391301 Jy
! Component: 200  -  total flux cleaned = -0.00404551 Jy
! Total flux subtracted in 200 components = -0.00404551 Jy
! Clean residual min=-0.003760 max=0.003517 Jy/beam
! Clean residual mean=0.000001 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.287348 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 112 components and 0.287348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077435Jy  sigma=1.454945
! Fit after  self-cal, rms=0.077442Jy  sigma=1.454720
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000434632 Jy
! Component: 100  -  total flux cleaned = -0.000495838 Jy
! Component: 150  -  total flux cleaned = -0.000579409 Jy
! Component: 200  -  total flux cleaned = -0.000630545 Jy
! Total flux subtracted in 200 components = -0.000630545 Jy
! Clean residual min=-0.003590 max=0.003403 Jy/beam
! Clean residual mean=0.000001 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.286718 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 121 components and 0.286718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077418Jy  sigma=1.454320
! Fit after  self-cal, rms=0.077416Jy  sigma=1.454276
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077416Jy  sigma=1.454276
! Fit after  self-cal, rms=0.078058Jy  sigma=1.442299
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7812 mas, bmaj=1.984 mas, bpa=-3.865 degrees
! Estimated noise=0.238769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0017475 Jy
! Component: 100  -  total flux cleaned = -0.00273096 Jy
! Component: 150  -  total flux cleaned = -0.00307204 Jy
! Component: 200  -  total flux cleaned = -0.00323341 Jy
! Total flux subtracted in 200 components = -0.00323341 Jy
! Clean residual min=-0.002485 max=0.002889 Jy/beam
! Clean residual mean=-0.000001 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.283484 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 129 components and 0.283484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078006Jy  sigma=1.441272
! Fit after  self-cal, rms=0.078028Jy  sigma=1.441104
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.6, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277699 Jy
! Component: 100  -  total flux cleaned = 0.00420907 Jy
! Component: 150  -  total flux cleaned = 0.00454969 Jy
! Component: 200  -  total flux cleaned = 0.00466646 Jy
! Total flux subtracted in 200 components = 0.00466646 Jy
! Clean residual min=-0.002294 max=0.002384 Jy/beam
! Clean residual mean=0.000000 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.288151 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 152 components and 0.288151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077924Jy  sigma=1.438714
! Fit after  self-cal, rms=0.077926Jy  sigma=1.438602
! Inverting map 
! Added new window around map position (-33.8, -36.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200533 Jy
! Component: 100  -  total flux cleaned = 0.00265356 Jy
! Component: 150  -  total flux cleaned = 0.00274926 Jy
! Component: 200  -  total flux cleaned = 0.00274974 Jy
! Total flux subtracted in 200 components = 0.00274974 Jy
! Clean residual min=-0.002269 max=0.001705 Jy/beam
! Clean residual mean=0.000000 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.290901 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 173 components and 0.290901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077867Jy  sigma=1.437252
! Fit after  self-cal, rms=0.077865Jy  sigma=1.437138
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077865Jy  sigma=1.437138
! Fit after  self-cal, rms=0.077725Jy  sigma=1.436602
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.121 mas, bmaj=5.022 mas, bpa=3.601 degrees
! Estimated noise=0.309068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000937447 Jy
! Component: 100  -  total flux cleaned = -0.000855796 Jy
! Component: 150  -  total flux cleaned = -0.000857871 Jy
! Component: 200  -  total flux cleaned = -0.000833313 Jy
! Total flux subtracted in 200 components = -0.000833313 Jy
! Clean residual min=-0.002905 max=0.002254 Jy/beam
! Clean residual mean=-0.000001 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.290067 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 194 components and 0.290067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077703Jy  sigma=1.436304
! Fit after  self-cal, rms=0.077704Jy  sigma=1.436252
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108361 Jy
! Component: 100  -  total flux cleaned = -0.000170213 Jy
! Component: 150  -  total flux cleaned = -0.000264801 Jy
! Component: 200  -  total flux cleaned = -0.000335287 Jy
! Total flux subtracted in 200 components = -0.000335287 Jy
! Clean residual min=-0.002793 max=0.002214 Jy/beam
! Clean residual mean=-0.000001 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.289732 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 199 components and 0.289732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077700Jy  sigma=1.436186
! Fit after  self-cal, rms=0.077699Jy  sigma=1.436175
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7816 mas, bmaj=1.986 mas, bpa=-3.881 degrees
! Estimated noise=0.23768 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7816 x 1.986 at -3.881 degrees (North through East)
! Clean map  min=-0.001932  max=0.19602 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6056 mas, bmaj=1.626 mas, bpa=-4.591 degrees
! Estimated noise=0.424524 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139879 Jy
! Component: 100  -  total flux cleaned = 0.182248 Jy
! Component: 150  -  total flux cleaned = 0.208686 Jy
! Component: 200  -  total flux cleaned = 0.226373 Jy
! Total flux subtracted in 200 components = 0.226373 Jy
! Clean residual min=-0.005583 max=0.009638 Jy/beam
! Clean residual mean=0.000007 rms=0.001365 Jy/beam
! Combined flux in latest and established models = 0.226373 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.226373 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7816 mas, bmaj=1.986 mas, bpa=-3.881 degrees
! Estimated noise=0.23768 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199003 Jy
! Component: 100  -  total flux cleaned = 0.0310146 Jy
! Component: 150  -  total flux cleaned = 0.0375946 Jy
! Component: 200  -  total flux cleaned = 0.0420272 Jy
! Total flux subtracted in 200 components = 0.0420272 Jy
! Clean residual min=-0.002524 max=0.003943 Jy/beam
! Clean residual mean=0.000001 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.2684 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 61 components and 0.2684 Jy
! Inverting map 
! Added new window around map position (-1.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00388353 Jy
! Component: 100  -  total flux cleaned = 0.00672335 Jy
! Component: 150  -  total flux cleaned = 0.00907528 Jy
! Component: 200  -  total flux cleaned = 0.011095 Jy
! Total flux subtracted in 200 components = 0.011095 Jy
! Clean residual min=-0.002162 max=0.002245 Jy/beam
! Clean residual mean=0.000000 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.279495 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 102 components and 0.279495 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.121 mas, bmaj=5.022 mas, bpa=3.601 degrees
! Estimated noise=0.309068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0028443 Jy
! Component: 100  -  total flux cleaned = 0.00487737 Jy
! Component: 150  -  total flux cleaned = 0.00643703 Jy
! Component: 200  -  total flux cleaned = 0.0076472 Jy
! Total flux subtracted in 200 components = 0.0076472 Jy
! Clean residual min=-0.002847 max=0.002504 Jy/beam
! Clean residual mean=0.000000 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.287142 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000908588 Jy
! Component: 100  -  total flux cleaned = 0.00136934 Jy
! Component: 150  -  total flux cleaned = 0.00171049 Jy
! Component: 200  -  total flux cleaned = 0.00202915 Jy
! Total flux subtracted in 200 components = 0.00202915 Jy
! Clean residual min=-0.002709 max=0.002312 Jy/beam
! Clean residual mean=-0.000000 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.289171 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 152 components and 0.289172 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7816 mas, bmaj=1.986 mas, bpa=-3.881 degrees
! Estimated noise=0.23768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000218982 Jy
! Component: 100  -  total flux cleaned = 3.50732e-05 Jy
! Component: 150  -  total flux cleaned = 0.000195328 Jy
! Component: 200  -  total flux cleaned = 0.000284125 Jy
! Total flux subtracted in 200 components = 0.000284125 Jy
! Clean residual min=-0.001972 max=0.001767 Jy/beam
! Clean residual mean=-0.000000 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.289456 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 170 components and 0.289456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077742Jy  sigma=1.436773
! Fit after  self-cal, rms=0.077717Jy  sigma=1.436331
wmodel /J0643-2451_X_map.mod
! wmodel: Unable to open new model file: /J0643-2451_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0643-2451_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7816 x 1.986 at -3.881 degrees (North through East)
! Clean map  min=-0.0017779  max=0.19581 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0643-2451_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.195813 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000433252 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.663775 0.663775 1.32755 2.6551 5.3102 10.6204 21.2408 42.4816 84.9632
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.195 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  451.96 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0643-2451_X_dfm.log closed on Thu May 19 20:06:14 2016