! Started logfile: /scr/pima/bg219b_uvs/J0642+8811_S_dfm.log on Thu May 19 20:05:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J0642+8811_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0642+8811_S_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.82509 visibilities/baseline/integration-bin.
! Found source: J0642+8811
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 9208 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0642+8811_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019886Jy  sigma=21.431124
! Fit after  self-cal, rms=0.869696Jy  sigma=18.222241
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.686 mas, bmaj=9.297 mas, bpa=3.076 degrees
! Estimated noise=0.616131 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0971094 Jy
! Component: 100  -  total flux cleaned = 0.125253 Jy
! Total flux subtracted in 100 components = 0.125253 Jy
! Clean residual min=-0.005543 max=0.012823 Jy/beam
! Clean residual mean=-0.000008 rms=0.001706 Jy/beam
! Combined flux in latest and established models = 0.125253 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.125253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071243Jy  sigma=1.432490
! Fit after  self-cal, rms=0.071091Jy  sigma=1.429462
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150306 Jy
! Component: 100  -  total flux cleaned = 0.0226679 Jy
! Total flux subtracted in 100 components = 0.0226679 Jy
! Clean residual min=-0.004226 max=0.004800 Jy/beam
! Clean residual mean=0.000016 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.14792 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.14792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067535Jy  sigma=1.353988
! Fit after  self-cal, rms=0.067484Jy  sigma=1.352629
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=10.3 mas, bpa=4.258 degrees
! Estimated noise=0.382374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00458767 Jy
! Component: 100  -  total flux cleaned = 0.0055003 Jy
! Component: 150  -  total flux cleaned = 0.00538303 Jy
! Component: 200  -  total flux cleaned = 0.00519904 Jy
! Total flux subtracted in 200 components = 0.00519904 Jy
! Clean residual min=-0.004201 max=0.004259 Jy/beam
! Clean residual mean=0.000069 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 0.15312 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.15312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067151Jy  sigma=1.346734
! Fit after  self-cal, rms=0.067144Jy  sigma=1.346543
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.316 x 10.3 at 4.258 degrees (North through East)
! Clean map  min=-0.0041418  max=0.1316 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.02     OV        0.99     
!   PT        1.13     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.03     KP        0.97     
!   LA        0.97     MK        0.97     NL        0.97     OV        1.01     
!   PT        1.08     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.04     KP        0.98     
!   LA        0.92     MK        0.98     NL        0.97     OV        0.96     
!   PT        1.08     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.03     KP        0.96     
!   LA        0.94     MK        0.99     NL        1.01     OV        1.00     
!   PT        1.06     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.067144Jy  sigma=1.346543
! Fit after  self-cal, rms=0.066302Jy  sigma=1.337054
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=10.3 mas, bpa=4.42 degrees
! Estimated noise=0.380534 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000432996 Jy
! Component: 100  -  total flux cleaned = 0.000433496 Jy
! Component: 150  -  total flux cleaned = 0.000406218 Jy
! Component: 200  -  total flux cleaned = 0.000454434 Jy
! Total flux subtracted in 200 components = 0.000454434 Jy
! Clean residual min=-0.004149 max=0.004419 Jy/beam
! Clean residual mean=0.000060 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.153574 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 34 components and 0.153574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066269Jy  sigma=1.336496
! Fit after  self-cal, rms=0.066264Jy  sigma=1.336329
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066264Jy  sigma=1.336329
! Fit after  self-cal, rms=0.064883Jy  sigma=1.321024
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.328 mas, bmaj=10.3 mas, bpa=4.25 degrees
! Estimated noise=0.37294 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00283631 Jy
! Component: 100  -  total flux cleaned = -0.00404154 Jy
! Component: 150  -  total flux cleaned = -0.00434866 Jy
! Component: 200  -  total flux cleaned = -0.00447007 Jy
! Total flux subtracted in 200 components = -0.00447007 Jy
! Clean residual min=-0.002584 max=0.002536 Jy/beam
! Clean residual mean=0.000033 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.149104 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 51 components and 0.149104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064769Jy  sigma=1.318563
! Fit after  self-cal, rms=0.064788Jy  sigma=1.318433
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.05674e-05 Jy
! Component: 100  -  total flux cleaned = -0.00016873 Jy
! Component: 150  -  total flux cleaned = -0.000220876 Jy
! Component: 200  -  total flux cleaned = -0.000237123 Jy
! Total flux subtracted in 200 components = -0.000237123 Jy
! Clean residual min=-0.002595 max=0.002587 Jy/beam
! Clean residual mean=0.000032 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.148867 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 55 components and 0.148867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064777Jy  sigma=1.318269
! Fit after  self-cal, rms=0.064777Jy  sigma=1.318258
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064777Jy  sigma=1.318258
! Fit after  self-cal, rms=0.063816Jy  sigma=1.316750
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.334 mas, bmaj=10.3 mas, bpa=4.112 degrees
! Estimated noise=0.367223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00188858 Jy
! Component: 100  -  total flux cleaned = -0.00263904 Jy
! Component: 150  -  total flux cleaned = -0.00277079 Jy
! Component: 200  -  total flux cleaned = -0.00284421 Jy
! Total flux subtracted in 200 components = -0.00284421 Jy
! Clean residual min=-0.002482 max=0.002444 Jy/beam
! Clean residual mean=0.000027 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.146023 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 65 components and 0.146023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063762Jy  sigma=1.315623
! Fit after  self-cal, rms=0.063763Jy  sigma=1.315606
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.79653e-05 Jy
! Component: 100  -  total flux cleaned = -4.76139e-05 Jy
! Component: 150  -  total flux cleaned = -8.80559e-05 Jy
! Component: 200  -  total flux cleaned = -0.00010009 Jy
! Total flux subtracted in 200 components = -0.00010009 Jy
! Clean residual min=-0.002463 max=0.002440 Jy/beam
! Clean residual mean=0.000027 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.145922 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.145922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063756Jy  sigma=1.315511
! Fit after  self-cal, rms=0.063756Jy  sigma=1.315508
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063756Jy  sigma=1.315508
! Fit after  self-cal, rms=0.063251Jy  sigma=1.312343
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.535 mas, bmaj=12.75 mas, bpa=7.199 degrees
! Estimated noise=0.447669 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000586447 Jy
! Component: 100  -  total flux cleaned = -0.000582377 Jy
! Component: 150  -  total flux cleaned = -0.000580255 Jy
! Component: 200  -  total flux cleaned = -0.00059255 Jy
! Total flux subtracted in 200 components = -0.00059255 Jy
! Clean residual min=-0.002568 max=0.002742 Jy/beam
! Clean residual mean=0.000028 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.14533 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 75 components and 0.14533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063252Jy  sigma=1.312450
! Fit after  self-cal, rms=0.063252Jy  sigma=1.312202
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.36858e-05 Jy
! Component: 100  -  total flux cleaned = -6.31409e-05 Jy
! Component: 150  -  total flux cleaned = -6.27418e-05 Jy
! Component: 200  -  total flux cleaned = -9.56515e-05 Jy
! Total flux subtracted in 200 components = -9.56515e-05 Jy
! Clean residual min=-0.002564 max=0.002764 Jy/beam
! Clean residual mean=0.000028 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.145234 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 77 components and 0.145234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063262Jy  sigma=1.312531
! Fit after  self-cal, rms=0.063261Jy  sigma=1.312398
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=10.29 mas, bpa=4.01 degrees
! Estimated noise=0.364411 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.332 x 10.29 at 4.01 degrees (North through East)
! Clean map  min=-0.002312  max=0.12525 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.696 mas, bmaj=9.276 mas, bpa=2.859 degrees
! Estimated noise=0.586105 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0923088 Jy
! Component: 100  -  total flux cleaned = 0.120028 Jy
! Component: 150  -  total flux cleaned = 0.133864 Jy
! Component: 200  -  total flux cleaned = 0.141014 Jy
! Total flux subtracted in 200 components = 0.141014 Jy
! Clean residual min=-0.003267 max=0.004714 Jy/beam
! Clean residual mean=-0.000004 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.141014 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.141014 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=10.29 mas, bpa=4.01 degrees
! Estimated noise=0.364411 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00459863 Jy
! Component: 100  -  total flux cleaned = 0.00529244 Jy
! Component: 150  -  total flux cleaned = 0.00530256 Jy
! Component: 200  -  total flux cleaned = 0.00525512 Jy
! Total flux subtracted in 200 components = 0.00525512 Jy
! Clean residual min=-0.002631 max=0.002123 Jy/beam
! Clean residual mean=0.000015 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.14627 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 34 components and 0.14627 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.535 mas, bmaj=12.75 mas, bpa=7.199 degrees
! Estimated noise=0.447669 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000300948 Jy
! Component: 100  -  total flux cleaned = -0.000453184 Jy
! Component: 150  -  total flux cleaned = -0.000508718 Jy
! Component: 200  -  total flux cleaned = -0.000539349 Jy
! Total flux subtracted in 200 components = -0.000539349 Jy
! Clean residual min=-0.002584 max=0.002706 Jy/beam
! Clean residual mean=0.000031 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.14573 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.90171e-05 Jy
! Component: 100  -  total flux cleaned = -6.91488e-05 Jy
! Component: 150  -  total flux cleaned = -0.000105477 Jy
! Component: 200  -  total flux cleaned = -0.000139195 Jy
! Total flux subtracted in 200 components = -0.000139195 Jy
! Clean residual min=-0.002545 max=0.002716 Jy/beam
! Clean residual mean=0.000031 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.145591 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 76 components and 0.145591 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=10.29 mas, bpa=4.01 degrees
! Estimated noise=0.364411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173044 Jy
! Component: 100  -  total flux cleaned = 0.000269295 Jy
! Component: 150  -  total flux cleaned = 0.000377025 Jy
! Component: 200  -  total flux cleaned = 0.000423585 Jy
! Total flux subtracted in 200 components = 0.000423585 Jy
! Clean residual min=-0.002495 max=0.002190 Jy/beam
! Clean residual mean=0.000015 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.146015 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.146015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063204Jy  sigma=1.311484
! Fit after  self-cal, rms=0.063198Jy  sigma=1.311310
wmodel /J0642+8811_S_map.mod
! wmodel: Unable to open new model file: /J0642+8811_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0642+8811_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.332 x 10.29 at 4.01 degrees (North through East)
! Clean map  min=-0.0024105  max=0.12518 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0642+8811_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.125181 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000527651 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.26453 1.26453 2.52907 5.05814 10.1163 20.2325 40.4651 80.9302
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.125 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  237.241 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0642+8811_S_dfm.log closed on Thu May 19 20:05:55 2016