! Started logfile: /scr/pima/bg219b_uvs/J0633-2223_S_uvs.log on Thu Apr  7 01:14:47 2016
obs /scr/pima/bg219b_uvs/J0633-2223_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0633-2223_S_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.880401 visibilities/baseline/integration-bin.
! Found source: J0633-2223
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4564 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J0633-2223_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013369Jy  sigma=17.980278
! Fit after  self-cal, rms=0.861398Jy  sigma=15.277786
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.137 mas, bmaj=12.28 mas, bpa=17.07 degrees
! Estimated noise=1.02945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105809 Jy
! Component: 100  -  total flux cleaned = 0.129601 Jy
! Total flux subtracted in 100 components = 0.129601 Jy
! Clean residual min=-0.007317 max=0.009542 Jy/beam
! Clean residual mean=0.000006 rms=0.002159 Jy/beam
! Combined flux in latest and established models = 0.129601 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.129601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084105Jy  sigma=1.388642
! Fit after  self-cal, rms=0.084081Jy  sigma=1.388306
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=14.03 mas, bpa=16.58 degrees
! Estimated noise=0.651676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013584 Jy
! Component: 100  -  total flux cleaned = 0.0197851 Jy
! Component: 150  -  total flux cleaned = 0.0232944 Jy
! Component: 200  -  total flux cleaned = 0.0252474 Jy
! Total flux subtracted in 200 components = 0.0252474 Jy
! Clean residual min=-0.005023 max=0.007929 Jy/beam
! Clean residual mean=0.000043 rms=0.001783 Jy/beam
! Combined flux in latest and established models = 0.154849 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 41 components and 0.154849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081985Jy  sigma=1.350923
! Fit after  self-cal, rms=0.081977Jy  sigma=1.350452
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.902 x 14.03 at 16.58 degrees (North through East)
! Clean map  min=-0.0047697  max=0.14025 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.081977Jy  sigma=1.350452
! Fit after  self-cal, rms=0.081977Jy  sigma=1.350452
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=14.03 mas, bpa=16.58 degrees
! Estimated noise=0.651676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000937627 Jy
! Component: 100  -  total flux cleaned = 0.000883946 Jy
! Component: 150  -  total flux cleaned = 0.000839166 Jy
! Component: 200  -  total flux cleaned = 0.000838632 Jy
! Total flux subtracted in 200 components = 0.000838632 Jy
! Clean residual min=-0.004909 max=0.007840 Jy/beam
! Clean residual mean=0.000044 rms=0.001771 Jy/beam
! Combined flux in latest and established models = 0.155687 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 59 components and 0.155687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081912Jy  sigma=1.349588
! Fit after  self-cal, rms=0.081911Jy  sigma=1.349524
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081911Jy  sigma=1.349524
! Fit after  self-cal, rms=0.081911Jy  sigma=1.349524
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=14.03 mas, bpa=16.58 degrees
! Estimated noise=0.651676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140737 Jy
! Component: 100  -  total flux cleaned = 3.56757e-05 Jy
! Component: 150  -  total flux cleaned = -5.81399e-05 Jy
! Component: 200  -  total flux cleaned = -0.000117628 Jy
! Total flux subtracted in 200 components = -0.000117628 Jy
! Clean residual min=-0.004877 max=0.007768 Jy/beam
! Clean residual mean=0.000043 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 0.15557 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 71 components and 0.15557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081884Jy  sigma=1.349095
! Fit after  self-cal, rms=0.081884Jy  sigma=1.349072
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-53, -19.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00723838 Jy
! Component: 100  -  total flux cleaned = 0.0109299 Jy
! Component: 150  -  total flux cleaned = 0.0117399 Jy
! Component: 200  -  total flux cleaned = 0.0118999 Jy
! Total flux subtracted in 200 components = 0.0118999 Jy
! Clean residual min=-0.004477 max=0.006723 Jy/beam
! Clean residual mean=0.000034 rms=0.001581 Jy/beam
! Combined flux in latest and established models = 0.16747 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 101 components and 0.16747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081264Jy  sigma=1.336364
! Fit after  self-cal, rms=0.081166Jy  sigma=1.334604
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081166Jy  sigma=1.334604
! Fit after  self-cal, rms=0.081545Jy  sigma=1.322068
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.905 mas, bmaj=14.03 mas, bpa=16.6 degrees
! Estimated noise=0.65423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000582265 Jy
! Component: 100  -  total flux cleaned = -0.000470328 Jy
! Component: 150  -  total flux cleaned = -0.000421699 Jy
! Component: 200  -  total flux cleaned = -0.000377379 Jy
! Total flux subtracted in 200 components = -0.000377379 Jy
! Clean residual min=-0.003842 max=0.006247 Jy/beam
! Clean residual mean=0.000020 rms=0.001255 Jy/beam
! Combined flux in latest and established models = 0.167092 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 114 components and 0.167092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081471Jy  sigma=1.321037
! Fit after  self-cal, rms=0.081490Jy  sigma=1.320793
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14.5, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00491669 Jy
! Component: 100  -  total flux cleaned = 0.00566279 Jy
! Component: 150  -  total flux cleaned = 0.00637725 Jy
! Component: 200  -  total flux cleaned = 0.00711438 Jy
! Total flux subtracted in 200 components = 0.00711438 Jy
! Clean residual min=-0.003026 max=0.004358 Jy/beam
! Clean residual mean=0.000021 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.174207 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 162 components and 0.174207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081094Jy  sigma=1.312314
! Fit after  self-cal, rms=0.081063Jy  sigma=1.311749
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081063Jy  sigma=1.311749
! Fit after  self-cal, rms=0.081001Jy  sigma=1.311568
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.055 mas, bmaj=19.95 mas, bpa=6.604 degrees
! Estimated noise=0.742342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000984597 Jy
! Component: 100  -  total flux cleaned = 0.00159569 Jy
! Component: 150  -  total flux cleaned = 0.00197115 Jy
! Component: 200  -  total flux cleaned = 0.00212278 Jy
! Total flux subtracted in 200 components = 0.00212278 Jy
! Clean residual min=-0.003244 max=0.005124 Jy/beam
! Clean residual mean=0.000031 rms=0.001292 Jy/beam
! Combined flux in latest and established models = 0.176329 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 205 components and 0.176329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080939Jy  sigma=1.310302
! Fit after  self-cal, rms=0.080937Jy  sigma=1.310140
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00038054 Jy
! Component: 100  -  total flux cleaned = 0.000337083 Jy
! Component: 150  -  total flux cleaned = 0.000225805 Jy
! Component: 200  -  total flux cleaned = 0.00016117 Jy
! Total flux subtracted in 200 components = 0.00016117 Jy
! Clean residual min=-0.003197 max=0.005196 Jy/beam
! Clean residual mean=0.000029 rms=0.001259 Jy/beam
! Combined flux in latest and established models = 0.176491 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 232 components and 0.176491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080918Jy  sigma=1.309786
! Fit after  self-cal, rms=0.080916Jy  sigma=1.309746
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.907 mas, bmaj=14.05 mas, bpa=16.58 degrees
! Estimated noise=0.653089 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.907 x 14.05 at 16.58 degrees (North through East)
! Clean map  min=-0.0032961  max=0.1402 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.135 mas, bmaj=12.28 mas, bpa=17.1 degrees
! Estimated noise=1.03522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106115 Jy
! Component: 100  -  total flux cleaned = 0.130277 Jy
! Component: 150  -  total flux cleaned = 0.141221 Jy
! Component: 200  -  total flux cleaned = 0.149395 Jy
! Total flux subtracted in 200 components = 0.149395 Jy
! Clean residual min=-0.006330 max=0.008351 Jy/beam
! Clean residual mean=0.000003 rms=0.001762 Jy/beam
! Combined flux in latest and established models = 0.149395 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.149395 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.907 mas, bmaj=14.05 mas, bpa=16.58 degrees
! Estimated noise=0.653089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00836923 Jy
! Component: 100  -  total flux cleaned = 0.013132 Jy
! Component: 150  -  total flux cleaned = 0.0160543 Jy
! Component: 200  -  total flux cleaned = 0.0185216 Jy
! Total flux subtracted in 200 components = 0.0185216 Jy
! Clean residual min=-0.003481 max=0.004735 Jy/beam
! Clean residual mean=0.000023 rms=0.001169 Jy/beam
! Combined flux in latest and established models = 0.167917 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 62 components and 0.167917 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.055 mas, bmaj=19.95 mas, bpa=6.604 degrees
! Estimated noise=0.742342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00340968 Jy
! Component: 100  -  total flux cleaned = 0.00564928 Jy
! Component: 150  -  total flux cleaned = 0.00713572 Jy
! Component: 200  -  total flux cleaned = 0.00800642 Jy
! Total flux subtracted in 200 components = 0.00800642 Jy
! Clean residual min=-0.003441 max=0.005515 Jy/beam
! Clean residual mean=0.000031 rms=0.001344 Jy/beam
! Combined flux in latest and established models = 0.175923 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000734231 Jy
! Component: 100  -  total flux cleaned = 0.00135627 Jy
! Component: 150  -  total flux cleaned = 0.0016577 Jy
! Component: 200  -  total flux cleaned = 0.00165925 Jy
! Total flux subtracted in 200 components = 0.00165925 Jy
! Clean residual min=-0.003260 max=0.005325 Jy/beam
! Clean residual mean=0.000030 rms=0.001287 Jy/beam
! Combined flux in latest and established models = 0.177583 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 141 components and 0.177582 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.907 mas, bmaj=14.05 mas, bpa=16.58 degrees
! Estimated noise=0.653089 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000320244 Jy
! Component: 100  -  total flux cleaned = 0.000385239 Jy
! Component: 150  -  total flux cleaned = 0.000557153 Jy
! Component: 200  -  total flux cleaned = 0.000824765 Jy
! Total flux subtracted in 200 components = 0.000824765 Jy
! Clean residual min=-0.003126 max=0.004589 Jy/beam
! Clean residual mean=0.000019 rms=0.000999 Jy/beam
! Combined flux in latest and established models = 0.178407 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 165 components and 0.178407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080975Jy  sigma=1.310305
! Fit after  self-cal, rms=0.080956Jy  sigma=1.310086
wmodel /scr/pima/bg219b_uvs/J0633-2223_S_map.mod
! Writing 165 model components to file: /scr/pima/bg219b_uvs/J0633-2223_S_map.mod
wobs /scr/pima/bg219b_uvs/J0633-2223_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J0633-2223_S_uvs.fits
wwins /scr/pima/bg219b_uvs/J0633-2223_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219b_uvs/J0633-2223_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188478 Jy
! Component: 100  -  total flux cleaned = 0.00344492 Jy
! Component: 150  -  total flux cleaned = 0.00464256 Jy
! Component: 200  -  total flux cleaned = 0.00570702 Jy
! Component: 250  -  total flux cleaned = 0.00636495 Jy
! Component: 300  -  total flux cleaned = 0.00670714 Jy
! Component: 350  -  total flux cleaned = 0.00680337 Jy
! Component: 400  -  total flux cleaned = 0.00698815 Jy
! Component: 450  -  total flux cleaned = 0.00712402 Jy
! Component: 500  -  total flux cleaned = 0.00725644 Jy
! Component: 550  -  total flux cleaned = 0.00734165 Jy
! Component: 600  -  total flux cleaned = 0.00742542 Jy
! Component: 650  -  total flux cleaned = 0.00742616 Jy
! Component: 700  -  total flux cleaned = 0.00750831 Jy
! Component: 750  -  total flux cleaned = 0.00754805 Jy
! Component: 800  -  total flux cleaned = 0.00754771 Jy
! Component: 850  -  total flux cleaned = 0.00758585 Jy
! Component: 900  -  total flux cleaned = 0.00762276 Jy
! Component: 950  -  total flux cleaned = 0.00762202 Jy
! Component: 1000  -  total flux cleaned = 0.0076941 Jy
! Component: 1050  -  total flux cleaned = 0.00765908 Jy
! Component: 1100  -  total flux cleaned = 0.00776429 Jy
! Component: 1150  -  total flux cleaned = 0.00783278 Jy
! Component: 1200  -  total flux cleaned = 0.00793398 Jy
! Component: 1250  -  total flux cleaned = 0.00783381 Jy
! Component: 1300  -  total flux cleaned = 0.00806429 Jy
! Component: 1350  -  total flux cleaned = 0.00803143 Jy
! Component: 1400  -  total flux cleaned = 0.00796771 Jy
! Component: 1450  -  total flux cleaned = 0.00815707 Jy
! Component: 1500  -  total flux cleaned = 0.00812557 Jy
! Component: 1550  -  total flux cleaned = 0.00821759 Jy
! Component: 1600  -  total flux cleaned = 0.00827857 Jy
! Component: 1650  -  total flux cleaned = 0.00827854 Jy
! Component: 1700  -  total flux cleaned = 0.00830832 Jy
! Component: 1750  -  total flux cleaned = 0.00842571 Jy
! Component: 1800  -  total flux cleaned = 0.00854142 Jy
! Component: 1850  -  total flux cleaned = 0.00856967 Jy
! Component: 1900  -  total flux cleaned = 0.00868279 Jy
! Component: 1950  -  total flux cleaned = 0.00876688 Jy
! Component: 2000  -  total flux cleaned = 0.00893221 Jy
! Component: 2050  -  total flux cleaned = 0.00893243 Jy
! Component: 2100  -  total flux cleaned = 0.00901376 Jy
! Component: 2150  -  total flux cleaned = 0.00920133 Jy
! Component: 2200  -  total flux cleaned = 0.00930727 Jy
! Component: 2250  -  total flux cleaned = 0.00933363 Jy
! Component: 2300  -  total flux cleaned = 0.00938595 Jy
! Component: 2350  -  total flux cleaned = 0.00948884 Jy
! Component: 2400  -  total flux cleaned = 0.00951475 Jy
! Component: 2450  -  total flux cleaned = 0.00954024 Jy
! Component: 2500  -  total flux cleaned = 0.00956541 Jy
! Component: 2550  -  total flux cleaned = 0.00966459 Jy
! Component: 2600  -  total flux cleaned = 0.00973804 Jy
! Component: 2650  -  total flux cleaned = 0.00968918 Jy
! Component: 2700  -  total flux cleaned = 0.00966484 Jy
! Component: 2750  -  total flux cleaned = 0.00968851 Jy
! Component: 2800  -  total flux cleaned = 0.00975966 Jy
! Component: 2850  -  total flux cleaned = 0.00978307 Jy
! Component: 2900  -  total flux cleaned = 0.00980618 Jy
! Component: 2950  -  total flux cleaned = 0.00978266 Jy
! Component: 3000  -  total flux cleaned = 0.00978264 Jy
! Component: 3050  -  total flux cleaned = 0.00980555 Jy
! Component: 3100  -  total flux cleaned = 0.00987341 Jy
! Component: 3150  -  total flux cleaned = 0.00996302 Jy
! Component: 3200  -  total flux cleaned = 0.00989645 Jy
! Component: 3250  -  total flux cleaned = 0.0100513 Jy
! Component: 3300  -  total flux cleaned = 0.0101387 Jy
! Component: 3350  -  total flux cleaned = 0.0101388 Jy
! Component: 3400  -  total flux cleaned = 0.0102681 Jy
! Component: 3450  -  total flux cleaned = 0.0102254 Jy
! Component: 3500  -  total flux cleaned = 0.0103531 Jy
! Component: 3550  -  total flux cleaned = 0.0104587 Jy
! Component: 3600  -  total flux cleaned = 0.0104374 Jy
! Component: 3650  -  total flux cleaned = 0.0104583 Jy
! Component: 3700  -  total flux cleaned = 0.0104377 Jy
! Component: 3750  -  total flux cleaned = 0.0105403 Jy
! Component: 3800  -  total flux cleaned = 0.010581 Jy
! Component: 3850  -  total flux cleaned = 0.0106011 Jy
! Component: 3900  -  total flux cleaned = 0.0106414 Jy
! Component: 3950  -  total flux cleaned = 0.010721 Jy
! Component: 4000  -  total flux cleaned = 0.0107208 Jy
! Component: 4050  -  total flux cleaned = 0.0107207 Jy
! Total flux subtracted in 4096 components = 0.0107206 Jy
! Clean residual min=-0.001215 max=0.001362 Jy/beam
! Clean residual mean=0.000007 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.189128 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 463 components and 0.189128 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J0633-2223_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.907 x 14.05 at 16.58 degrees (North through East)
! Clean map  min=-0.0035615  max=0.14016 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0633-2223_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.140164 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000383157 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.820091 0.820091 1.64018 3.28036 6.56073 13.1215 26.2429 52.4858
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.14 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  365.813 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0633-2223_S_uvs.log closed on Thu Apr  7 01:14:52 2016