! Started logfile: /scr/pima/bg219b_uvs/J0633-2223_S_dfm.log on Thu May 19 20:05:23 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219b_uvs/J0633-2223_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J0633-2223_S_uva.fits ! AN table 1: 36 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.880401 visibilities/baseline/integration-bin. ! Found source: J0633-2223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 4564 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0633-2223_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013369Jy sigma=17.980278 ! Fit after self-cal, rms=0.861398Jy sigma=15.277786 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=12.28 mas, bpa=17.07 degrees ! Estimated noise=1.02945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105809 Jy ! Component: 100 - total flux cleaned = 0.129601 Jy ! Total flux subtracted in 100 components = 0.129601 Jy ! Clean residual min=-0.007317 max=0.009542 Jy/beam ! Clean residual mean=0.000006 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 0.129601 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.129601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084105Jy sigma=1.388642 ! Fit after self-cal, rms=0.084081Jy sigma=1.388306 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=14.03 mas, bpa=16.58 degrees ! Estimated noise=0.651676 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013584 Jy ! Component: 100 - total flux cleaned = 0.0197851 Jy ! Component: 150 - total flux cleaned = 0.0232944 Jy ! Component: 200 - total flux cleaned = 0.0252474 Jy ! Total flux subtracted in 200 components = 0.0252474 Jy ! Clean residual min=-0.005023 max=0.007929 Jy/beam ! Clean residual mean=0.000043 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.154849 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 41 components and 0.154849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081985Jy sigma=1.350923 ! Fit after self-cal, rms=0.081977Jy sigma=1.350452 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.902 x 14.03 at 16.58 degrees (North through East) ! Clean map min=-0.0047697 max=0.14025 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.081977Jy sigma=1.350452 ! Fit after self-cal, rms=0.081977Jy sigma=1.350452 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=14.03 mas, bpa=16.58 degrees ! Estimated noise=0.651676 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000937627 Jy ! Component: 100 - total flux cleaned = 0.000883946 Jy ! Component: 150 - total flux cleaned = 0.000839166 Jy ! Component: 200 - total flux cleaned = 0.000838632 Jy ! Total flux subtracted in 200 components = 0.000838632 Jy ! Clean residual min=-0.004909 max=0.007840 Jy/beam ! Clean residual mean=0.000044 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.155687 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.155687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081912Jy sigma=1.349588 ! Fit after self-cal, rms=0.081911Jy sigma=1.349524 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081911Jy sigma=1.349524 ! Fit after self-cal, rms=0.081911Jy sigma=1.349524 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=14.03 mas, bpa=16.58 degrees ! Estimated noise=0.651676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140737 Jy ! Component: 100 - total flux cleaned = 3.56757e-05 Jy ! Component: 150 - total flux cleaned = -5.81399e-05 Jy ! Component: 200 - total flux cleaned = -0.000117628 Jy ! Total flux subtracted in 200 components = -0.000117628 Jy ! Clean residual min=-0.004877 max=0.007768 Jy/beam ! Clean residual mean=0.000043 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 0.15557 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 0.15557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081884Jy sigma=1.349095 ! Fit after self-cal, rms=0.081884Jy sigma=1.349072 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-53, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00723838 Jy ! Component: 100 - total flux cleaned = 0.0109299 Jy ! Component: 150 - total flux cleaned = 0.0117399 Jy ! Component: 200 - total flux cleaned = 0.0118999 Jy ! Total flux subtracted in 200 components = 0.0118999 Jy ! Clean residual min=-0.004477 max=0.006723 Jy/beam ! Clean residual mean=0.000034 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.16747 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 101 components and 0.16747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081264Jy sigma=1.336364 ! Fit after self-cal, rms=0.081166Jy sigma=1.334604 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081166Jy sigma=1.334604 ! Fit after self-cal, rms=0.081545Jy sigma=1.322068 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=14.03 mas, bpa=16.6 degrees ! Estimated noise=0.65423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000582265 Jy ! Component: 100 - total flux cleaned = -0.000470328 Jy ! Component: 150 - total flux cleaned = -0.000421699 Jy ! Component: 200 - total flux cleaned = -0.000377379 Jy ! Total flux subtracted in 200 components = -0.000377379 Jy ! Clean residual min=-0.003842 max=0.006247 Jy/beam ! Clean residual mean=0.000020 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.167092 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 0.167092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081471Jy sigma=1.321037 ! Fit after self-cal, rms=0.081490Jy sigma=1.320793 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491669 Jy ! Component: 100 - total flux cleaned = 0.00566279 Jy ! Component: 150 - total flux cleaned = 0.00637725 Jy ! Component: 200 - total flux cleaned = 0.00711438 Jy ! Total flux subtracted in 200 components = 0.00711438 Jy ! Clean residual min=-0.003026 max=0.004358 Jy/beam ! Clean residual mean=0.000021 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.174207 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 162 components and 0.174207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081094Jy sigma=1.312314 ! Fit after self-cal, rms=0.081063Jy sigma=1.311749 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081063Jy sigma=1.311749 ! Fit after self-cal, rms=0.081001Jy sigma=1.311568 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.055 mas, bmaj=19.95 mas, bpa=6.604 degrees ! Estimated noise=0.742342 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000984597 Jy ! Component: 100 - total flux cleaned = 0.00159569 Jy ! Component: 150 - total flux cleaned = 0.00197115 Jy ! Component: 200 - total flux cleaned = 0.00212278 Jy ! Total flux subtracted in 200 components = 0.00212278 Jy ! Clean residual min=-0.003244 max=0.005124 Jy/beam ! Clean residual mean=0.000031 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.176329 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 205 components and 0.176329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080939Jy sigma=1.310302 ! Fit after self-cal, rms=0.080937Jy sigma=1.310140 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038054 Jy ! Component: 100 - total flux cleaned = 0.000337083 Jy ! Component: 150 - total flux cleaned = 0.000225805 Jy ! Component: 200 - total flux cleaned = 0.00016117 Jy ! Total flux subtracted in 200 components = 0.00016117 Jy ! Clean residual min=-0.003197 max=0.005196 Jy/beam ! Clean residual mean=0.000029 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.176491 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 232 components and 0.176491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080918Jy sigma=1.309786 ! Fit after self-cal, rms=0.080916Jy sigma=1.309746 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=14.05 mas, bpa=16.58 degrees ! Estimated noise=0.653089 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.907 x 14.05 at 16.58 degrees (North through East) ! Clean map min=-0.0032961 max=0.1402 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=12.28 mas, bpa=17.1 degrees ! Estimated noise=1.03522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106115 Jy ! Component: 100 - total flux cleaned = 0.130277 Jy ! Component: 150 - total flux cleaned = 0.141221 Jy ! Component: 200 - total flux cleaned = 0.149395 Jy ! Total flux subtracted in 200 components = 0.149395 Jy ! Clean residual min=-0.006330 max=0.008351 Jy/beam ! Clean residual mean=0.000003 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.149395 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.149395 Jy ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=14.05 mas, bpa=16.58 degrees ! Estimated noise=0.653089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00836923 Jy ! Component: 100 - total flux cleaned = 0.013132 Jy ! Component: 150 - total flux cleaned = 0.0160543 Jy ! Component: 200 - total flux cleaned = 0.0185216 Jy ! Total flux subtracted in 200 components = 0.0185216 Jy ! Clean residual min=-0.003481 max=0.004735 Jy/beam ! Clean residual mean=0.000023 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.167917 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 62 components and 0.167917 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.055 mas, bmaj=19.95 mas, bpa=6.604 degrees ! Estimated noise=0.742342 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340968 Jy ! Component: 100 - total flux cleaned = 0.00564928 Jy ! Component: 150 - total flux cleaned = 0.00713572 Jy ! Component: 200 - total flux cleaned = 0.00800642 Jy ! Total flux subtracted in 200 components = 0.00800642 Jy ! Clean residual min=-0.003441 max=0.005515 Jy/beam ! Clean residual mean=0.000031 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.175923 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734231 Jy ! Component: 100 - total flux cleaned = 0.00135627 Jy ! Component: 150 - total flux cleaned = 0.0016577 Jy ! Component: 200 - total flux cleaned = 0.00165925 Jy ! Total flux subtracted in 200 components = 0.00165925 Jy ! Clean residual min=-0.003260 max=0.005325 Jy/beam ! Clean residual mean=0.000030 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.177583 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 141 components and 0.177582 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=14.05 mas, bpa=16.58 degrees ! Estimated noise=0.653089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320244 Jy ! Component: 100 - total flux cleaned = 0.000385239 Jy ! Component: 150 - total flux cleaned = 0.000557153 Jy ! Component: 200 - total flux cleaned = 0.000824765 Jy ! Total flux subtracted in 200 components = 0.000824765 Jy ! Clean residual min=-0.003126 max=0.004589 Jy/beam ! Clean residual mean=0.000019 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.178407 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 165 components and 0.178407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080975Jy sigma=1.310305 ! Fit after self-cal, rms=0.080956Jy sigma=1.310086 wmodel /J0633-2223_S_map.mod ! wmodel: Unable to open new model file: /J0633-2223_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219b_uvs/J0633-2223_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.907 x 14.05 at 16.58 degrees (North through East) ! Clean map min=-0.0034491 max=0.14062 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0633-2223_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.140624 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00099308 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.11858 2.11858 4.23717 8.47434 16.9487 33.8973 67.7947 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.14 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 141.604 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J0633-2223_S_dfm.log closed on Thu May 19 20:05:25 2016