! Started logfile: /scr/pima/bg219b_uvs/J0630+1738_S_uvs.log on Thu Apr  7 01:14:38 2016
obs /scr/pima/bg219b_uvs/J0630+1738_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0630+1738_S_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.811508 visibilities/baseline/integration-bin.
! Found source: J0630+1738
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3272 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J0630+1738_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.092604Jy  sigma=23.059656
! Fit after  self-cal, rms=0.659438Jy  sigma=13.912548
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=7.922 mas, bpa=15.65 degrees
! Estimated noise=0.863944 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.263054 Jy
! Component: 100  -  total flux cleaned = 0.320437 Jy
! Total flux subtracted in 100 components = 0.320437 Jy
! Clean residual min=-0.010562 max=0.016508 Jy/beam
! Clean residual mean=-0.000034 rms=0.002999 Jy/beam
! Combined flux in latest and established models = 0.320437 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.320437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077691Jy  sigma=1.597979
! Fit after  self-cal, rms=0.077687Jy  sigma=1.597899
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees
! Estimated noise=0.662259 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0222365 Jy
! Component: 100  -  total flux cleaned = 0.0317056 Jy
! Component: 150  -  total flux cleaned = 0.0373306 Jy
! Component: 200  -  total flux cleaned = 0.0408927 Jy
! Total flux subtracted in 200 components = 0.0408927 Jy
! Clean residual min=-0.010190 max=0.011870 Jy/beam
! Clean residual mean=-0.000039 rms=0.002704 Jy/beam
! Combined flux in latest and established models = 0.36133 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 34 components and 0.36133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071790Jy  sigma=1.468665
! Fit after  self-cal, rms=0.071780Jy  sigma=1.468254
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.997 x 8.429 at 12.6 degrees (North through East)
! Clean map  min=-0.01011  max=0.34384 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.071780Jy  sigma=1.468254
! Fit after  self-cal, rms=0.071780Jy  sigma=1.468254
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees
! Estimated noise=0.662259 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144935 Jy
! Component: 100  -  total flux cleaned = 0.00192078 Jy
! Component: 150  -  total flux cleaned = 0.00223302 Jy
! Component: 200  -  total flux cleaned = 0.00234022 Jy
! Total flux subtracted in 200 components = 0.00234022 Jy
! Clean residual min=-0.009923 max=0.011501 Jy/beam
! Clean residual mean=-0.000040 rms=0.002671 Jy/beam
! Combined flux in latest and established models = 0.36367 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 48 components and 0.36367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071642Jy  sigma=1.465354
! Fit after  self-cal, rms=0.071629Jy  sigma=1.465152
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071629Jy  sigma=1.465152
! Fit after  self-cal, rms=0.071629Jy  sigma=1.465152
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees
! Estimated noise=0.662259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000204987 Jy
! Component: 100  -  total flux cleaned = -0.000107934 Jy
! Component: 150  -  total flux cleaned = -0.000105362 Jy
! Component: 200  -  total flux cleaned = -0.000143711 Jy
! Total flux subtracted in 200 components = -0.000143711 Jy
! Clean residual min=-0.009856 max=0.011408 Jy/beam
! Clean residual mean=-0.000040 rms=0.002661 Jy/beam
! Combined flux in latest and established models = 0.363526 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 56 components and 0.363526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071577Jy  sigma=1.463978
! Fit after  self-cal, rms=0.071570Jy  sigma=1.463895
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-82.5, -41.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00937728 Jy
! Component: 100  -  total flux cleaned = 0.0111194 Jy
! Component: 150  -  total flux cleaned = 0.011246 Jy
! Component: 200  -  total flux cleaned = 0.0111241 Jy
! Total flux subtracted in 200 components = 0.0111241 Jy
! Clean residual min=-0.008646 max=0.010330 Jy/beam
! Clean residual mean=-0.000042 rms=0.002427 Jy/beam
! Combined flux in latest and established models = 0.374651 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 100 components and 0.374651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070390Jy  sigma=1.434485
! Fit after  self-cal, rms=0.070212Jy  sigma=1.430031
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070212Jy  sigma=1.430031
! Fit after  self-cal, rms=0.070212Jy  sigma=1.430031
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees
! Estimated noise=0.662259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023897 Jy
! Component: 100  -  total flux cleaned = 0.00228692 Jy
! Component: 150  -  total flux cleaned = 0.00199588 Jy
! Component: 200  -  total flux cleaned = 0.00182239 Jy
! Total flux subtracted in 200 components = 0.00182239 Jy
! Clean residual min=-0.008637 max=0.009409 Jy/beam
! Clean residual mean=-0.000042 rms=0.002334 Jy/beam
! Combined flux in latest and established models = 0.376473 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 123 components and 0.376473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069909Jy  sigma=1.422411
! Fit after  self-cal, rms=0.069890Jy  sigma=1.421701
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000896924 Jy
! Component: 100  -  total flux cleaned = 0.000650124 Jy
! Component: 150  -  total flux cleaned = 0.000427492 Jy
! Component: 200  -  total flux cleaned = 0.000355577 Jy
! Total flux subtracted in 200 components = 0.000355577 Jy
! Clean residual min=-0.008622 max=0.009429 Jy/beam
! Clean residual mean=-0.000042 rms=0.002298 Jy/beam
! Combined flux in latest and established models = 0.376828 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 133 components and 0.376828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069743Jy  sigma=1.417940
! Fit after  self-cal, rms=0.069742Jy  sigma=1.417726
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069742Jy  sigma=1.417726
! Fit after  self-cal, rms=0.069742Jy  sigma=1.417726
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.205 mas, bmaj=10.27 mas, bpa=-2.28 degrees
! Estimated noise=0.7826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00166049 Jy
! Component: 100  -  total flux cleaned = -0.00303713 Jy
! Component: 150  -  total flux cleaned = -0.0039602 Jy
! Component: 200  -  total flux cleaned = -0.00469788 Jy
! Total flux subtracted in 200 components = -0.00469788 Jy
! Clean residual min=-0.011754 max=0.013809 Jy/beam
! Clean residual mean=-0.000081 rms=0.003427 Jy/beam
! Combined flux in latest and established models = 0.372131 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 150 components and 0.372131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069678Jy  sigma=1.416053
! Fit after  self-cal, rms=0.069662Jy  sigma=1.415713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.60863e-05 Jy
! Component: 100  -  total flux cleaned = -0.00064944 Jy
! Component: 150  -  total flux cleaned = -0.00119315 Jy
! Component: 200  -  total flux cleaned = -0.00157739 Jy
! Total flux subtracted in 200 components = -0.00157739 Jy
! Clean residual min=-0.011858 max=0.013742 Jy/beam
! Clean residual mean=-0.000080 rms=0.003405 Jy/beam
! Combined flux in latest and established models = 0.370553 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 164 components and 0.370553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069653Jy  sigma=1.415270
! Fit after  self-cal, rms=0.069646Jy  sigma=1.415112
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees
! Estimated noise=0.662259 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.997 x 8.429 at 12.6 degrees (North through East)
! Clean map  min=-0.0089402  max=0.33923 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=7.922 mas, bpa=15.65 degrees
! Estimated noise=0.863944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.262911 Jy
! Component: 100  -  total flux cleaned = 0.320335 Jy
! Component: 150  -  total flux cleaned = 0.338786 Jy
! Component: 200  -  total flux cleaned = 0.347725 Jy
! Total flux subtracted in 200 components = 0.347725 Jy
! Clean residual min=-0.010102 max=0.012785 Jy/beam
! Clean residual mean=-0.000041 rms=0.002540 Jy/beam
! Combined flux in latest and established models = 0.347725 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.347725 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees
! Estimated noise=0.662259 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.5, -98).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128982 Jy
! Component: 100  -  total flux cleaned = 0.0209551 Jy
! Component: 150  -  total flux cleaned = 0.0236324 Jy
! Component: 200  -  total flux cleaned = 0.0252294 Jy
! Total flux subtracted in 200 components = 0.0252294 Jy
! Clean residual min=-0.008815 max=0.009229 Jy/beam
! Clean residual mean=-0.000036 rms=0.002331 Jy/beam
! Combined flux in latest and established models = 0.372955 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 82 components and 0.372955 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.205 mas, bmaj=10.27 mas, bpa=-2.28 degrees
! Estimated noise=0.7826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000890848 Jy
! Component: 100  -  total flux cleaned = 0.000211256 Jy
! Component: 150  -  total flux cleaned = -0.000486024 Jy
! Component: 200  -  total flux cleaned = -0.000724137 Jy
! Total flux subtracted in 200 components = -0.000724137 Jy
! Clean residual min=-0.010601 max=0.012972 Jy/beam
! Clean residual mean=-0.000072 rms=0.003312 Jy/beam
! Combined flux in latest and established models = 0.372231 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208688 Jy
! Component: 100  -  total flux cleaned = -0.000389878 Jy
! Component: 150  -  total flux cleaned = -0.000472331 Jy
! Component: 200  -  total flux cleaned = -0.000624468 Jy
! Total flux subtracted in 200 components = -0.000624468 Jy
! Clean residual min=-0.010859 max=0.012695 Jy/beam
! Clean residual mean=-0.000071 rms=0.003260 Jy/beam
! Combined flux in latest and established models = 0.371606 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 149 components and 0.371606 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees
! Estimated noise=0.662259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000752158 Jy
! Component: 100  -  total flux cleaned = 0.00154031 Jy
! Component: 150  -  total flux cleaned = 0.00223535 Jy
! Component: 200  -  total flux cleaned = 0.00276636 Jy
! Total flux subtracted in 200 components = 0.00276636 Jy
! Clean residual min=-0.007989 max=0.008702 Jy/beam
! Clean residual mean=-0.000036 rms=0.002153 Jy/beam
! Combined flux in latest and established models = 0.374372 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 171 components and 0.374372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069008Jy  sigma=1.402223
! Fit after  self-cal, rms=0.068841Jy  sigma=1.398180
wmodel /scr/pima/bg219b_uvs/J0630+1738_S_map.mod
! Writing 171 model components to file: /scr/pima/bg219b_uvs/J0630+1738_S_map.mod
wobs /scr/pima/bg219b_uvs/J0630+1738_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J0630+1738_S_uvs.fits
wwins /scr/pima/bg219b_uvs/J0630+1738_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219b_uvs/J0630+1738_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000838468 Jy
! Component: 100  -  total flux cleaned = 0.00136982 Jy
! Component: 150  -  total flux cleaned = 0.0022368 Jy
! Component: 200  -  total flux cleaned = 0.00317641 Jy
! Component: 250  -  total flux cleaned = 0.00385053 Jy
! Component: 300  -  total flux cleaned = 0.00417442 Jy
! Component: 350  -  total flux cleaned = 0.00459689 Jy
! Component: 400  -  total flux cleaned = 0.005211 Jy
! Component: 450  -  total flux cleaned = 0.00570461 Jy
! Component: 500  -  total flux cleaned = 0.00637448 Jy
! Component: 550  -  total flux cleaned = 0.00674674 Jy
! Component: 600  -  total flux cleaned = 0.00711124 Jy
! Component: 650  -  total flux cleaned = 0.00737781 Jy
! Component: 700  -  total flux cleaned = 0.00772535 Jy
! Component: 750  -  total flux cleaned = 0.00806519 Jy
! Component: 800  -  total flux cleaned = 0.00847882 Jy
! Component: 850  -  total flux cleaned = 0.00863956 Jy
! Component: 900  -  total flux cleaned = 0.00911433 Jy
! Component: 950  -  total flux cleaned = 0.00919229 Jy
! Component: 1000  -  total flux cleaned = 0.00919485 Jy
! Component: 1050  -  total flux cleaned = 0.00949381 Jy
! Component: 1100  -  total flux cleaned = 0.00956674 Jy
! Component: 1150  -  total flux cleaned = 0.00970925 Jy
! Component: 1200  -  total flux cleaned = 0.00971027 Jy
! Component: 1250  -  total flux cleaned = 0.00991935 Jy
! Component: 1300  -  total flux cleaned = 0.00998776 Jy
! Component: 1350  -  total flux cleaned = 0.00998932 Jy
! Component: 1400  -  total flux cleaned = 0.0102531 Jy
! Component: 1450  -  total flux cleaned = 0.0103163 Jy
! Component: 1500  -  total flux cleaned = 0.0104445 Jy
! Component: 1550  -  total flux cleaned = 0.0106956 Jy
! Component: 1600  -  total flux cleaned = 0.0106339 Jy
! Component: 1650  -  total flux cleaned = 0.0108163 Jy
! Component: 1700  -  total flux cleaned = 0.010577 Jy
! Component: 1750  -  total flux cleaned = 0.0105187 Jy
! Component: 1800  -  total flux cleaned = 0.0105774 Jy
! Component: 1850  -  total flux cleaned = 0.0106918 Jy
! Component: 1900  -  total flux cleaned = 0.0107479 Jy
! Component: 1950  -  total flux cleaned = 0.0106371 Jy
! Component: 2000  -  total flux cleaned = 0.0105821 Jy
! Component: 2050  -  total flux cleaned = 0.0105819 Jy
! Component: 2100  -  total flux cleaned = 0.0105292 Jy
! Component: 2150  -  total flux cleaned = 0.0104777 Jy
! Component: 2200  -  total flux cleaned = 0.0105288 Jy
! Component: 2250  -  total flux cleaned = 0.0103769 Jy
! Component: 2300  -  total flux cleaned = 0.0103775 Jy
! Component: 2350  -  total flux cleaned = 0.0103773 Jy
! Component: 2400  -  total flux cleaned = 0.0103286 Jy
! Component: 2450  -  total flux cleaned = 0.0103285 Jy
! Component: 2500  -  total flux cleaned = 0.010281 Jy
! Component: 2550  -  total flux cleaned = 0.010281 Jy
! Component: 2600  -  total flux cleaned = 0.0102813 Jy
! Component: 2650  -  total flux cleaned = 0.0102818 Jy
! Component: 2700  -  total flux cleaned = 0.0102818 Jy
! Component: 2750  -  total flux cleaned = 0.0101917 Jy
! Component: 2800  -  total flux cleaned = 0.0100597 Jy
! Component: 2850  -  total flux cleaned = 0.0100164 Jy
! Component: 2900  -  total flux cleaned = 0.00997416 Jy
! Component: 2950  -  total flux cleaned = 0.010017 Jy
! Component: 3000  -  total flux cleaned = 0.0100591 Jy
! Component: 3050  -  total flux cleaned = 0.0101433 Jy
! Component: 3100  -  total flux cleaned = 0.0103089 Jy
! Component: 3150  -  total flux cleaned = 0.010185 Jy
! Component: 3200  -  total flux cleaned = 0.0101443 Jy
! Component: 3250  -  total flux cleaned = 0.0102247 Jy
! Component: 3300  -  total flux cleaned = 0.0103045 Jy
! Component: 3350  -  total flux cleaned = 0.0102259 Jy
! Component: 3400  -  total flux cleaned = 0.010343 Jy
! Component: 3450  -  total flux cleaned = 0.0102652 Jy
! Component: 3500  -  total flux cleaned = 0.0101884 Jy
! Component: 3550  -  total flux cleaned = 0.0102266 Jy
! Component: 3600  -  total flux cleaned = 0.0102638 Jy
! Component: 3650  -  total flux cleaned = 0.010264 Jy
! Component: 3700  -  total flux cleaned = 0.0102268 Jy
! Component: 3750  -  total flux cleaned = 0.0101904 Jy
! Component: 3800  -  total flux cleaned = 0.010226 Jy
! Component: 3850  -  total flux cleaned = 0.0102617 Jy
! Component: 3900  -  total flux cleaned = 0.0102618 Jy
! Component: 3950  -  total flux cleaned = 0.0101914 Jy
! Component: 4000  -  total flux cleaned = 0.0101566 Jy
! Component: 4050  -  total flux cleaned = 0.0101567 Jy
! Total flux subtracted in 4096 components = 0.010088 Jy
! Clean residual min=-0.002032 max=0.001983 Jy/beam
! Clean residual mean=-0.000011 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.384461 Jy
keep
! Adding 371 model components to the UV plane model.
! The established model now contains 542 components and 0.38446 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J0630+1738_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.997 x 8.429 at 12.6 degrees (North through East)
! Clean map  min=-0.0044521  max=0.33569 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0630+1738_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.335685 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000663226 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.592721 0.592721 1.18544 2.37088 4.74177 9.48354 18.9671 37.9341 75.8683
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.335 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  506.14 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0630+1738_S_uvs.log closed on Thu Apr  7 01:14:42 2016