! Started logfile: /scr/pima/bg219b_uvs/J0630+1738_S_dfm.log on Thu May 19 20:05:07 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219b_uvs/J0630+1738_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J0630+1738_S_uva.fits ! AN table 1: 28 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.811508 visibilities/baseline/integration-bin. ! Found source: J0630+1738 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 3272 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0630+1738_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.092604Jy sigma=23.059656 ! Fit after self-cal, rms=0.659438Jy sigma=13.912548 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=7.922 mas, bpa=15.65 degrees ! Estimated noise=0.863944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263054 Jy ! Component: 100 - total flux cleaned = 0.320437 Jy ! Total flux subtracted in 100 components = 0.320437 Jy ! Clean residual min=-0.010562 max=0.016508 Jy/beam ! Clean residual mean=-0.000034 rms=0.002999 Jy/beam ! Combined flux in latest and established models = 0.320437 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.320437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077691Jy sigma=1.597979 ! Fit after self-cal, rms=0.077687Jy sigma=1.597899 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees ! Estimated noise=0.662259 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222365 Jy ! Component: 100 - total flux cleaned = 0.0317056 Jy ! Component: 150 - total flux cleaned = 0.0373306 Jy ! Component: 200 - total flux cleaned = 0.0408927 Jy ! Total flux subtracted in 200 components = 0.0408927 Jy ! Clean residual min=-0.010190 max=0.011870 Jy/beam ! Clean residual mean=-0.000039 rms=0.002704 Jy/beam ! Combined flux in latest and established models = 0.36133 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 34 components and 0.36133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071790Jy sigma=1.468665 ! Fit after self-cal, rms=0.071780Jy sigma=1.468254 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.997 x 8.429 at 12.6 degrees (North through East) ! Clean map min=-0.01011 max=0.34384 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.071780Jy sigma=1.468254 ! Fit after self-cal, rms=0.071780Jy sigma=1.468254 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees ! Estimated noise=0.662259 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144935 Jy ! Component: 100 - total flux cleaned = 0.00192078 Jy ! Component: 150 - total flux cleaned = 0.00223302 Jy ! Component: 200 - total flux cleaned = 0.00234022 Jy ! Total flux subtracted in 200 components = 0.00234022 Jy ! Clean residual min=-0.009923 max=0.011501 Jy/beam ! Clean residual mean=-0.000040 rms=0.002671 Jy/beam ! Combined flux in latest and established models = 0.36367 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.36367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071642Jy sigma=1.465354 ! Fit after self-cal, rms=0.071629Jy sigma=1.465152 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071629Jy sigma=1.465152 ! Fit after self-cal, rms=0.071629Jy sigma=1.465152 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees ! Estimated noise=0.662259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000204987 Jy ! Component: 100 - total flux cleaned = -0.000107934 Jy ! Component: 150 - total flux cleaned = -0.000105362 Jy ! Component: 200 - total flux cleaned = -0.000143711 Jy ! Total flux subtracted in 200 components = -0.000143711 Jy ! Clean residual min=-0.009856 max=0.011408 Jy/beam ! Clean residual mean=-0.000040 rms=0.002661 Jy/beam ! Combined flux in latest and established models = 0.363526 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.363526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071577Jy sigma=1.463978 ! Fit after self-cal, rms=0.071570Jy sigma=1.463895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-82.5, -41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00937728 Jy ! Component: 100 - total flux cleaned = 0.0111194 Jy ! Component: 150 - total flux cleaned = 0.011246 Jy ! Component: 200 - total flux cleaned = 0.0111241 Jy ! Total flux subtracted in 200 components = 0.0111241 Jy ! Clean residual min=-0.008646 max=0.010330 Jy/beam ! Clean residual mean=-0.000042 rms=0.002427 Jy/beam ! Combined flux in latest and established models = 0.374651 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 100 components and 0.374651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070390Jy sigma=1.434485 ! Fit after self-cal, rms=0.070212Jy sigma=1.430031 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070212Jy sigma=1.430031 ! Fit after self-cal, rms=0.070212Jy sigma=1.430031 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees ! Estimated noise=0.662259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023897 Jy ! Component: 100 - total flux cleaned = 0.00228692 Jy ! Component: 150 - total flux cleaned = 0.00199588 Jy ! Component: 200 - total flux cleaned = 0.00182239 Jy ! Total flux subtracted in 200 components = 0.00182239 Jy ! Clean residual min=-0.008637 max=0.009409 Jy/beam ! Clean residual mean=-0.000042 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.376473 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 123 components and 0.376473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069909Jy sigma=1.422411 ! Fit after self-cal, rms=0.069890Jy sigma=1.421701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000896924 Jy ! Component: 100 - total flux cleaned = 0.000650124 Jy ! Component: 150 - total flux cleaned = 0.000427492 Jy ! Component: 200 - total flux cleaned = 0.000355577 Jy ! Total flux subtracted in 200 components = 0.000355577 Jy ! Clean residual min=-0.008622 max=0.009429 Jy/beam ! Clean residual mean=-0.000042 rms=0.002298 Jy/beam ! Combined flux in latest and established models = 0.376828 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 133 components and 0.376828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069743Jy sigma=1.417940 ! Fit after self-cal, rms=0.069742Jy sigma=1.417726 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069742Jy sigma=1.417726 ! Fit after self-cal, rms=0.069742Jy sigma=1.417726 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.205 mas, bmaj=10.27 mas, bpa=-2.28 degrees ! Estimated noise=0.7826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166049 Jy ! Component: 100 - total flux cleaned = -0.00303713 Jy ! Component: 150 - total flux cleaned = -0.0039602 Jy ! Component: 200 - total flux cleaned = -0.00469788 Jy ! Total flux subtracted in 200 components = -0.00469788 Jy ! Clean residual min=-0.011754 max=0.013809 Jy/beam ! Clean residual mean=-0.000081 rms=0.003427 Jy/beam ! Combined flux in latest and established models = 0.372131 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 150 components and 0.372131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069678Jy sigma=1.416053 ! Fit after self-cal, rms=0.069662Jy sigma=1.415713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.60863e-05 Jy ! Component: 100 - total flux cleaned = -0.00064944 Jy ! Component: 150 - total flux cleaned = -0.00119315 Jy ! Component: 200 - total flux cleaned = -0.00157739 Jy ! Total flux subtracted in 200 components = -0.00157739 Jy ! Clean residual min=-0.011858 max=0.013742 Jy/beam ! Clean residual mean=-0.000080 rms=0.003405 Jy/beam ! Combined flux in latest and established models = 0.370553 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 164 components and 0.370553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069653Jy sigma=1.415270 ! Fit after self-cal, rms=0.069646Jy sigma=1.415112 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees ! Estimated noise=0.662259 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.997 x 8.429 at 12.6 degrees (North through East) ! Clean map min=-0.0089402 max=0.33923 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=7.922 mas, bpa=15.65 degrees ! Estimated noise=0.863944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.262911 Jy ! Component: 100 - total flux cleaned = 0.320335 Jy ! Component: 150 - total flux cleaned = 0.338786 Jy ! Component: 200 - total flux cleaned = 0.347725 Jy ! Total flux subtracted in 200 components = 0.347725 Jy ! Clean residual min=-0.010102 max=0.012785 Jy/beam ! Clean residual mean=-0.000041 rms=0.002540 Jy/beam ! Combined flux in latest and established models = 0.347725 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.347725 Jy ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees ! Estimated noise=0.662259 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -98). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128982 Jy ! Component: 100 - total flux cleaned = 0.0209551 Jy ! Component: 150 - total flux cleaned = 0.0236324 Jy ! Component: 200 - total flux cleaned = 0.0252294 Jy ! Total flux subtracted in 200 components = 0.0252294 Jy ! Clean residual min=-0.008815 max=0.009229 Jy/beam ! Clean residual mean=-0.000036 rms=0.002331 Jy/beam ! Combined flux in latest and established models = 0.372955 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 82 components and 0.372955 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.205 mas, bmaj=10.27 mas, bpa=-2.28 degrees ! Estimated noise=0.7826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000890848 Jy ! Component: 100 - total flux cleaned = 0.000211256 Jy ! Component: 150 - total flux cleaned = -0.000486024 Jy ! Component: 200 - total flux cleaned = -0.000724137 Jy ! Total flux subtracted in 200 components = -0.000724137 Jy ! Clean residual min=-0.010601 max=0.012972 Jy/beam ! Clean residual mean=-0.000072 rms=0.003312 Jy/beam ! Combined flux in latest and established models = 0.372231 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208688 Jy ! Component: 100 - total flux cleaned = -0.000389878 Jy ! Component: 150 - total flux cleaned = -0.000472331 Jy ! Component: 200 - total flux cleaned = -0.000624468 Jy ! Total flux subtracted in 200 components = -0.000624468 Jy ! Clean residual min=-0.010859 max=0.012695 Jy/beam ! Clean residual mean=-0.000071 rms=0.003260 Jy/beam ! Combined flux in latest and established models = 0.371606 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 149 components and 0.371606 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=8.429 mas, bpa=12.6 degrees ! Estimated noise=0.662259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000752158 Jy ! Component: 100 - total flux cleaned = 0.00154031 Jy ! Component: 150 - total flux cleaned = 0.00223535 Jy ! Component: 200 - total flux cleaned = 0.00276636 Jy ! Total flux subtracted in 200 components = 0.00276636 Jy ! Clean residual min=-0.007989 max=0.008702 Jy/beam ! Clean residual mean=-0.000036 rms=0.002153 Jy/beam ! Combined flux in latest and established models = 0.374372 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 171 components and 0.374372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069008Jy sigma=1.402223 ! Fit after self-cal, rms=0.068841Jy sigma=1.398180 wmodel /J0630+1738_S_map.mod ! wmodel: Unable to open new model file: /J0630+1738_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219b_uvs/J0630+1738_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.997 x 8.429 at 12.6 degrees (North through East) ! Clean map min=-0.0077017 max=0.33638 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0630+1738_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.336378 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00211734 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.88835 1.88835 3.77671 7.55342 15.1068 30.2137 60.4273 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0063 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.336 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 158.868 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J0630+1738_S_dfm.log closed on Thu May 19 20:05:09 2016