! Started logfile: /scr/pima/bg219b_uvs/J0629+1527_S_dfm.log on Thu May 19 20:05:00 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219b_uvs/J0629+1527_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J0629+1527_S_uva.fits ! AN table 1: 62 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.869176 visibilities/baseline/integration-bin. ! Found source: J0629+1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7760 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0629+1527_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006071Jy sigma=23.701391 ! Fit after self-cal, rms=0.939845Jy sigma=22.159343 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=7.936 mas, bpa=15.22 degrees ! Estimated noise=0.546142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0474642 Jy ! Component: 100 - total flux cleaned = 0.0578271 Jy ! Total flux subtracted in 100 components = 0.0578271 Jy ! Clean residual min=-0.003144 max=0.003731 Jy/beam ! Clean residual mean=-0.000009 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.0578271 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0578271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060728Jy sigma=1.327880 ! Fit after self-cal, rms=0.059454Jy sigma=1.301253 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.261 mas, bmaj=8.944 mas, bpa=17.34 degrees ! Estimated noise=0.373336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404671 Jy ! Component: 100 - total flux cleaned = 0.00508453 Jy ! Component: 150 - total flux cleaned = 0.00508408 Jy ! Component: 200 - total flux cleaned = 0.00508402 Jy ! Total flux subtracted in 200 components = 0.00508402 Jy ! Clean residual min=-0.002777 max=0.002924 Jy/beam ! Clean residual mean=-0.000014 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.0629111 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0629111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059143Jy sigma=1.296143 ! Fit after self-cal, rms=0.059138Jy sigma=1.295998 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.261 x 8.944 at 17.34 degrees (North through East) ! Clean map min=-0.002625 max=0.062835 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.90 HN 1.03 KP 0.96 ! LA 1.01 NL 0.96 OV 0.97 PT 1.19 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.059138Jy sigma=1.295998 ! Fit after self-cal, rms=0.058384Jy sigma=1.294049 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.243 mas, bmaj=8.938 mas, bpa=17.52 degrees ! Estimated noise=0.372383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255388 Jy ! Component: 100 - total flux cleaned = 0.000228862 Jy ! Component: 150 - total flux cleaned = 0.00022925 Jy ! Component: 200 - total flux cleaned = 0.000228982 Jy ! Total flux subtracted in 200 components = 0.000228982 Jy ! Clean residual min=-0.002507 max=0.002620 Jy/beam ! Clean residual mean=-0.000012 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0631401 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0631401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058361Jy sigma=1.293598 ! Fit after self-cal, rms=0.058337Jy sigma=1.293365 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058337Jy sigma=1.293365 ! Fit after self-cal, rms=0.058545Jy sigma=1.293032 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.238 mas, bmaj=8.948 mas, bpa=17.56 degrees ! Estimated noise=0.37378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.7306e-05 Jy ! Component: 100 - total flux cleaned = 3.64967e-05 Jy ! Component: 150 - total flux cleaned = 3.61833e-05 Jy ! Component: 200 - total flux cleaned = 5.07083e-05 Jy ! Total flux subtracted in 200 components = 5.07083e-05 Jy ! Clean residual min=-0.002651 max=0.002702 Jy/beam ! Clean residual mean=-0.000012 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.0631908 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.0631908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058530Jy sigma=1.292829 ! Fit after self-cal, rms=0.058529Jy sigma=1.292774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.02178e-05 Jy ! Component: 100 - total flux cleaned = -9.3932e-06 Jy ! Component: 150 - total flux cleaned = 1.95835e-06 Jy ! Component: 200 - total flux cleaned = 1.26891e-05 Jy ! Total flux subtracted in 200 components = 1.26891e-05 Jy ! Clean residual min=-0.002625 max=0.002735 Jy/beam ! Clean residual mean=-0.000012 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0632035 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0632035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058522Jy sigma=1.292673 ! Fit after self-cal, rms=0.058520Jy sigma=1.292648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058520Jy sigma=1.292648 ! Fit after self-cal, rms=0.058561Jy sigma=1.292635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.236 mas, bmaj=8.95 mas, bpa=17.59 degrees ! Estimated noise=0.374036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.86251e-05 Jy ! Component: 100 - total flux cleaned = 2.46608e-06 Jy ! Component: 150 - total flux cleaned = 2.12945e-05 Jy ! Component: 200 - total flux cleaned = 2.99642e-05 Jy ! Total flux subtracted in 200 components = 2.99642e-05 Jy ! Clean residual min=-0.002622 max=0.002761 Jy/beam ! Clean residual mean=-0.000012 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0632335 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0632335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058556Jy sigma=1.292576 ! Fit after self-cal, rms=0.058556Jy sigma=1.292559 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.1668e-05 Jy ! Component: 100 - total flux cleaned = 5.79314e-06 Jy ! Component: 150 - total flux cleaned = 1.25495e-05 Jy ! Component: 200 - total flux cleaned = 1.88343e-05 Jy ! Total flux subtracted in 200 components = 1.88343e-05 Jy ! Clean residual min=-0.002605 max=0.002779 Jy/beam ! Clean residual mean=-0.000012 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0632523 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.0632523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058553Jy sigma=1.292523 ! Fit after self-cal, rms=0.058552Jy sigma=1.292510 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058552Jy sigma=1.292510 ! Fit after self-cal, rms=0.058562Jy sigma=1.292510 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.117 mas, bmaj=10.9 mas, bpa=3.513 degrees ! Estimated noise=0.4243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126428 Jy ! Component: 100 - total flux cleaned = -0.000126759 Jy ! Component: 150 - total flux cleaned = -0.000141496 Jy ! Component: 200 - total flux cleaned = -0.000155475 Jy ! Total flux subtracted in 200 components = -0.000155475 Jy ! Clean residual min=-0.003033 max=0.003322 Jy/beam ! Clean residual mean=-0.000021 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.0630968 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.0630968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058563Jy sigma=1.292505 ! Fit after self-cal, rms=0.058560Jy sigma=1.292473 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.26165e-05 Jy ! Component: 100 - total flux cleaned = -4.19719e-05 Jy ! Component: 150 - total flux cleaned = -4.83548e-05 Jy ! Component: 200 - total flux cleaned = -5.98294e-05 Jy ! Total flux subtracted in 200 components = -5.98294e-05 Jy ! Clean residual min=-0.003016 max=0.003312 Jy/beam ! Clean residual mean=-0.000021 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.063037 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.063037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058561Jy sigma=1.292497 ! Fit after self-cal, rms=0.058560Jy sigma=1.292484 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=8.95 mas, bpa=17.61 degrees ! Estimated noise=0.374091 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.235 x 8.95 at 17.61 degrees (North through East) ! Clean map min=-0.0025449 max=0.063317 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=7.936 mas, bpa=15.55 degrees ! Estimated noise=0.547382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483452 Jy ! Component: 100 - total flux cleaned = 0.0589369 Jy ! Component: 150 - total flux cleaned = 0.0608749 Jy ! Component: 200 - total flux cleaned = 0.0612074 Jy ! Total flux subtracted in 200 components = 0.0612074 Jy ! Clean residual min=-0.003460 max=0.003328 Jy/beam ! Clean residual mean=-0.000010 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.0612074 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0612074 Jy ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=8.95 mas, bpa=17.61 degrees ! Estimated noise=0.374091 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127862 Jy ! Component: 100 - total flux cleaned = 0.00142401 Jy ! Component: 150 - total flux cleaned = 0.00156656 Jy ! Component: 200 - total flux cleaned = 0.00162798 Jy ! Total flux subtracted in 200 components = 0.00162798 Jy ! Clean residual min=-0.002539 max=0.002665 Jy/beam ! Clean residual mean=-0.000012 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0628354 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.0628354 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.117 mas, bmaj=10.9 mas, bpa=3.513 degrees ! Estimated noise=0.4243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295367 Jy ! Component: 100 - total flux cleaned = 0.000312065 Jy ! Component: 150 - total flux cleaned = 0.000312563 Jy ! Component: 200 - total flux cleaned = 0.000285752 Jy ! Total flux subtracted in 200 components = 0.000285752 Jy ! Clean residual min=-0.003002 max=0.003340 Jy/beam ! Clean residual mean=-0.000021 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.0631211 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.70326e-05 Jy ! Component: 100 - total flux cleaned = -5.97589e-05 Jy ! Component: 150 - total flux cleaned = -8.10024e-05 Jy ! Component: 200 - total flux cleaned = -0.000100761 Jy ! Total flux subtracted in 200 components = -0.000100761 Jy ! Clean residual min=-0.003007 max=0.003321 Jy/beam ! Clean residual mean=-0.000021 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.0630203 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.0630203 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=8.95 mas, bpa=17.61 degrees ! Estimated noise=0.374091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.14186e-05 Jy ! Component: 100 - total flux cleaned = -2.54e-06 Jy ! Component: 150 - total flux cleaned = 1.35557e-05 Jy ! Component: 200 - total flux cleaned = 1.34031e-05 Jy ! Total flux subtracted in 200 components = 1.34031e-05 Jy ! Clean residual min=-0.002604 max=0.002704 Jy/beam ! Clean residual mean=-0.000012 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0630338 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.0630337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058565Jy sigma=1.292640 ! Fit after self-cal, rms=0.058565Jy sigma=1.292599 wmodel /J0629+1527_S_map.mod ! wmodel: Unable to open new model file: /J0629+1527_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219b_uvs/J0629+1527_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.235 x 8.95 at 17.61 degrees (North through East) ! Clean map min=-0.0025591 max=0.063242 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0629+1527_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0632424 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000701762 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.32891 3.32891 6.65783 13.3157 26.6313 53.2626 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.063 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 90.119 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J0629+1527_S_dfm.log closed on Thu May 19 20:05:02 2016