! Started logfile: /scr/pima/bg219b_uvs/J0628+2835_X_dfm.log on Thu May 19 20:04:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0628+2835_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0628+2835_X_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.800397 visibilities/baseline/integration-bin.
! Found source: J0628+2835
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24204 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0628+2835_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021958Jy  sigma=23.895992
! Fit after  self-cal, rms=0.830074Jy  sigma=19.299469
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7347 mas, bmaj=1.412 mas, bpa=-2.343 degrees
! Estimated noise=0.429748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126182 Jy
! Component: 100  -  total flux cleaned = 0.163864 Jy
! Total flux subtracted in 100 components = 0.163864 Jy
! Clean residual min=-0.007251 max=0.017139 Jy/beam
! Clean residual mean=0.000001 rms=0.002191 Jy/beam
! Combined flux in latest and established models = 0.163864 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.163864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076578Jy  sigma=1.705827
! Fit after  self-cal, rms=0.076458Jy  sigma=1.703332
! Inverting map 
! Added new window around map position (0.8, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191093 Jy
! Component: 100  -  total flux cleaned = 0.0301866 Jy
! Total flux subtracted in 100 components = 0.0301866 Jy
! Clean residual min=-0.005879 max=0.010101 Jy/beam
! Clean residual mean=0.000003 rms=0.001587 Jy/beam
! Combined flux in latest and established models = 0.19405 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 18 components and 0.19405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070235Jy  sigma=1.531659
! Fit after  self-cal, rms=0.070033Jy  sigma=1.527014
! Inverting map 
! Added new window around map position (3, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00992931 Jy
! Component: 100  -  total flux cleaned = 0.0159683 Jy
! Total flux subtracted in 100 components = 0.0159683 Jy
! Clean residual min=-0.005490 max=0.008512 Jy/beam
! Clean residual mean=0.000005 rms=0.001320 Jy/beam
! Combined flux in latest and established models = 0.210019 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.210019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068403Jy  sigma=1.481833
! Fit after  self-cal, rms=0.068308Jy  sigma=1.479234
! Inverting map 
! Added new window around map position (2, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744233 Jy
! Component: 100  -  total flux cleaned = 0.0114945 Jy
! Total flux subtracted in 100 components = 0.0114945 Jy
! Clean residual min=-0.005176 max=0.006105 Jy/beam
! Clean residual mean=0.000006 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.221513 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.221513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067597Jy  sigma=1.456990
! Fit after  self-cal, rms=0.067514Jy  sigma=1.455078
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9666 mas, bmaj=1.715 mas, bpa=-0.6328 degrees
! Estimated noise=0.199153 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.8, -20.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744413 Jy
! Component: 100  -  total flux cleaned = 0.0116932 Jy
! Component: 150  -  total flux cleaned = 0.0148738 Jy
! Component: 200  -  total flux cleaned = 0.0173177 Jy
! Total flux subtracted in 200 components = 0.0173177 Jy
! Clean residual min=-0.004239 max=0.007787 Jy/beam
! Clean residual mean=0.000011 rms=0.001211 Jy/beam
! Combined flux in latest and established models = 0.238831 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 64 components and 0.238831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066643Jy  sigma=1.430646
! Fit after  self-cal, rms=0.066511Jy  sigma=1.426858
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9666 x 1.715 at -0.6328 degrees (North through East)
! Clean map  min=-0.0036877  max=0.16493 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.08     KP        0.93     
!   LA        0.96     MK        0.94     NL        1.03     OV        0.96     
!   PT        1.19     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.06     KP        0.98     
!   LA        0.96     MK        0.97     NL        1.03     OV        0.99     
!   PT        1.19     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.03     KP        0.96     
!   LA        0.96     MK        1.00     NL        1.02     OV        0.95     
!   PT        1.19     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.06     KP        0.97     
!   LA        0.95     MK        0.98     NL        1.03     OV        0.97     
!   PT        1.16     SC        1.06     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.94     HN        0.98     KP        0.95     
!   LA        0.91     MK        0.94     NL        0.98     OV        0.93     
!   PT        1.14     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.92     HN        1.02     KP        0.93     
!   LA        0.92     MK        0.94     NL        1.02     OV        0.96     
!   PT        1.12     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        0.97     KP        0.92     
!   LA        0.95     MK        0.93     NL        0.98     OV        0.92     
!   PT        1.09     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.066511Jy  sigma=1.426858
! Fit after  self-cal, rms=0.064922Jy  sigma=1.395763
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9655 mas, bmaj=1.717 mas, bpa=-0.8102 degrees
! Estimated noise=0.196797 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00191396 Jy
! Component: 100  -  total flux cleaned = -0.00196431 Jy
! Component: 150  -  total flux cleaned = -0.0018154 Jy
! Component: 200  -  total flux cleaned = -0.00163899 Jy
! Total flux subtracted in 200 components = -0.00163899 Jy
! Clean residual min=-0.002524 max=0.002987 Jy/beam
! Clean residual mean=0.000007 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.237192 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 75 components and 0.237192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064790Jy  sigma=1.392812
! Fit after  self-cal, rms=0.064823Jy  sigma=1.392548
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064823Jy  sigma=1.392548
! Fit after  self-cal, rms=0.064468Jy  sigma=1.384342
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9658 mas, bmaj=1.716 mas, bpa=-0.7113 degrees
! Estimated noise=0.195463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00142015 Jy
! Component: 100  -  total flux cleaned = -0.00158859 Jy
! Component: 150  -  total flux cleaned = -0.00155226 Jy
! Component: 200  -  total flux cleaned = -0.00158617 Jy
! Total flux subtracted in 200 components = -0.00158617 Jy
! Clean residual min=-0.002232 max=0.002515 Jy/beam
! Clean residual mean=0.000005 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.235606 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 84 components and 0.235606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064402Jy  sigma=1.382778
! Fit after  self-cal, rms=0.064408Jy  sigma=1.382645
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205006 Jy
! Component: 100  -  total flux cleaned = 0.000329494 Jy
! Component: 150  -  total flux cleaned = 0.000330529 Jy
! Component: 200  -  total flux cleaned = 0.000356086 Jy
! Total flux subtracted in 200 components = 0.000356086 Jy
! Clean residual min=-0.002210 max=0.002512 Jy/beam
! Clean residual mean=0.000005 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.235962 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 90 components and 0.235962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064384Jy  sigma=1.381964
! Fit after  self-cal, rms=0.064380Jy  sigma=1.381888
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064380Jy  sigma=1.381888
! Fit after  self-cal, rms=0.063994Jy  sigma=1.381484
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9666 mas, bmaj=1.716 mas, bpa=-0.6586 degrees
! Estimated noise=0.1943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00125953 Jy
! Component: 100  -  total flux cleaned = -0.00128617 Jy
! Component: 150  -  total flux cleaned = -0.00128578 Jy
! Component: 200  -  total flux cleaned = -0.00128612 Jy
! Total flux subtracted in 200 components = -0.00128612 Jy
! Clean residual min=-0.002147 max=0.002521 Jy/beam
! Clean residual mean=0.000005 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.234676 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 93 components and 0.234676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063960Jy  sigma=1.380772
! Fit after  self-cal, rms=0.063958Jy  sigma=1.380708
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (19.4, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207941 Jy
! Component: 100  -  total flux cleaned = 0.00231779 Jy
! Component: 150  -  total flux cleaned = 0.00265497 Jy
! Component: 200  -  total flux cleaned = 0.00292029 Jy
! Total flux subtracted in 200 components = 0.00292029 Jy
! Clean residual min=-0.002039 max=0.001977 Jy/beam
! Clean residual mean=0.000005 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.237596 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 106 components and 0.237596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063885Jy  sigma=1.378738
! Fit after  self-cal, rms=0.063879Jy  sigma=1.378518
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063879Jy  sigma=1.378518
! Fit after  self-cal, rms=0.063533Jy  sigma=1.373337
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.233 mas, bmaj=2.7 mas, bpa=1.924 degrees
! Estimated noise=0.238158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000618834 Jy
! Component: 100  -  total flux cleaned = -0.000748923 Jy
! Component: 150  -  total flux cleaned = -0.000924178 Jy
! Component: 200  -  total flux cleaned = -0.000954149 Jy
! Total flux subtracted in 200 components = -0.000954149 Jy
! Clean residual min=-0.002874 max=0.002857 Jy/beam
! Clean residual mean=0.000008 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.236642 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 124 components and 0.236642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063502Jy  sigma=1.372731
! Fit after  self-cal, rms=0.063502Jy  sigma=1.372608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166561 Jy
! Component: 100  -  total flux cleaned = -0.000114096 Jy
! Component: 150  -  total flux cleaned = -6.71256e-05 Jy
! Component: 200  -  total flux cleaned = 1.49619e-05 Jy
! Total flux subtracted in 200 components = 1.49619e-05 Jy
! Clean residual min=-0.002851 max=0.002874 Jy/beam
! Clean residual mean=0.000009 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.236657 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 130 components and 0.236657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063495Jy  sigma=1.372526
! Fit after  self-cal, rms=0.063493Jy  sigma=1.372488
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9656 mas, bmaj=1.716 mas, bpa=-0.681 degrees
! Estimated noise=0.193404 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9656 x 1.716 at -0.681 degrees (North through East)
! Clean map  min=-0.0017448  max=0.15902 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7339 mas, bmaj=1.412 mas, bpa=-2.397 degrees
! Estimated noise=0.415913 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12197 Jy
! Component: 100  -  total flux cleaned = 0.159977 Jy
! Component: 150  -  total flux cleaned = 0.179393 Jy
! Component: 200  -  total flux cleaned = 0.191747 Jy
! Total flux subtracted in 200 components = 0.191747 Jy
! Clean residual min=-0.004029 max=0.006822 Jy/beam
! Clean residual mean=0.000000 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.191747 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.191747 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9656 mas, bmaj=1.716 mas, bpa=-0.681 degrees
! Estimated noise=0.193404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116803 Jy
! Component: 100  -  total flux cleaned = 0.0192703 Jy
! Component: 150  -  total flux cleaned = 0.0247871 Jy
! Component: 200  -  total flux cleaned = 0.0289475 Jy
! Total flux subtracted in 200 components = 0.0289475 Jy
! Clean residual min=-0.002454 max=0.002831 Jy/beam
! Clean residual mean=0.000003 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.220694 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 39 components and 0.220694 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.233 mas, bmaj=2.7 mas, bpa=1.924 degrees
! Estimated noise=0.238158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00479182 Jy
! Component: 100  -  total flux cleaned = 0.00788833 Jy
! Component: 150  -  total flux cleaned = 0.0100199 Jy
! Component: 200  -  total flux cleaned = 0.0115859 Jy
! Total flux subtracted in 200 components = 0.0115859 Jy
! Clean residual min=-0.002735 max=0.003140 Jy/beam
! Clean residual mean=0.000008 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.23228 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115796 Jy
! Component: 100  -  total flux cleaned = 0.00186917 Jy
! Component: 150  -  total flux cleaned = 0.00243332 Jy
! Component: 200  -  total flux cleaned = 0.00293877 Jy
! Total flux subtracted in 200 components = 0.00293877 Jy
! Clean residual min=-0.002580 max=0.002881 Jy/beam
! Clean residual mean=0.000009 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.235219 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 85 components and 0.235219 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9656 mas, bmaj=1.716 mas, bpa=-0.681 degrees
! Estimated noise=0.193404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000704706 Jy
! Component: 100  -  total flux cleaned = 0.000937183 Jy
! Component: 150  -  total flux cleaned = 0.00110999 Jy
! Component: 200  -  total flux cleaned = 0.00126886 Jy
! Total flux subtracted in 200 components = 0.00126886 Jy
! Clean residual min=-0.001772 max=0.001869 Jy/beam
! Clean residual mean=0.000004 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.236488 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 103 components and 0.236488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063533Jy  sigma=1.373436
! Fit after  self-cal, rms=0.063508Jy  sigma=1.372743
wmodel /J0628+2835_X_map.mod
! wmodel: Unable to open new model file: /J0628+2835_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0628+2835_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9656 x 1.716 at -0.681 degrees (North through East)
! Clean map  min=-0.0017075  max=0.15855 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0628+2835_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.158551 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000481011 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.910137 0.910137 1.82027 3.64055 7.2811 14.5622 29.1244 58.2488
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.158 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  329.62 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0628+2835_X_dfm.log closed on Thu May 19 20:04:51 2016