! Started logfile: /scr/pima/bg219b_uvs/J0613+1708_X_uvs.log on Thu Apr 7 01:44:26 2016 obs /scr/pima/bg219b_uvs/J0613+1708_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J0613+1708_X_uva.fits ! AN table 1: 41 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.894851 visibilities/baseline/integration-bin. ! Found source: J0613+1708 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 19812 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J0613+1708_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.017941Jy sigma=24.404459 ! Fit after self-cal, rms=0.824663Jy sigma=19.710437 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6883 mas, bmaj=1.722 mas, bpa=-1.843 degrees ! Estimated noise=0.511186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138515 Jy ! Component: 100 - total flux cleaned = 0.168765 Jy ! Total flux subtracted in 100 components = 0.168765 Jy ! Clean residual min=-0.006467 max=0.008767 Jy/beam ! Clean residual mean=0.000000 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 0.168765 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.168765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.065021Jy sigma=1.498143 ! Fit after self-cal, rms=0.064897Jy sigma=1.494394 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.992 mas, bpa=-1.538 degrees ! Estimated noise=0.285237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0094835 Jy ! Component: 100 - total flux cleaned = 0.0139367 Jy ! Component: 150 - total flux cleaned = 0.0162019 Jy ! Component: 200 - total flux cleaned = 0.0173289 Jy ! Total flux subtracted in 200 components = 0.0173289 Jy ! Clean residual min=-0.006135 max=0.007773 Jy/beam ! Clean residual mean=0.000006 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 0.186094 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.186094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063638Jy sigma=1.462842 ! Fit after self-cal, rms=0.063603Jy sigma=1.462008 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8493 x 1.992 at -1.538 degrees (North through East) ! Clean map min=-0.0057257 max=0.17747 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063603Jy sigma=1.462008 ! Fit after self-cal, rms=0.063603Jy sigma=1.462008 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.992 mas, bpa=-1.538 degrees ! Estimated noise=0.285237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804439 Jy ! Component: 100 - total flux cleaned = 0.000804847 Jy ! Component: 150 - total flux cleaned = 0.000806502 Jy ! Component: 200 - total flux cleaned = 0.000863836 Jy ! Total flux subtracted in 200 components = 0.000863836 Jy ! Clean residual min=-0.005991 max=0.007801 Jy/beam ! Clean residual mean=0.000007 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.186958 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.186958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063563Jy sigma=1.461025 ! Fit after self-cal, rms=0.063554Jy sigma=1.460874 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063554Jy sigma=1.460874 ! Fit after self-cal, rms=0.063554Jy sigma=1.460874 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.992 mas, bpa=-1.538 degrees ! Estimated noise=0.285237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120093 Jy ! Component: 100 - total flux cleaned = -0.000124237 Jy ! Component: 150 - total flux cleaned = -9.92417e-05 Jy ! Component: 200 - total flux cleaned = -7.49831e-05 Jy ! Total flux subtracted in 200 components = -7.49831e-05 Jy ! Clean residual min=-0.005964 max=0.007780 Jy/beam ! Clean residual mean=0.000007 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.186883 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.186883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063532Jy sigma=1.460260 ! Fit after self-cal, rms=0.063525Jy sigma=1.460170 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.8, 49.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00761663 Jy ! Component: 100 - total flux cleaned = 0.0122241 Jy ! Component: 150 - total flux cleaned = 0.0147938 Jy ! Component: 200 - total flux cleaned = 0.0163502 Jy ! Total flux subtracted in 200 components = 0.0163502 Jy ! Clean residual min=-0.005249 max=0.006532 Jy/beam ! Clean residual mean=0.000003 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.203233 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 57 components and 0.203233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.062564Jy sigma=1.432412 ! Fit after self-cal, rms=0.062483Jy sigma=1.429869 ! Inverting map ! Added new window around map position (0, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00549426 Jy ! Component: 100 - total flux cleaned = 0.00745947 Jy ! Component: 150 - total flux cleaned = 0.00845875 Jy ! Component: 200 - total flux cleaned = 0.00893033 Jy ! Total flux subtracted in 200 components = 0.00893033 Jy ! Clean residual min=-0.005284 max=0.006321 Jy/beam ! Clean residual mean=0.000004 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.212163 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 76 components and 0.212163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061968Jy sigma=1.416090 ! Fit after self-cal, rms=0.061942Jy sigma=1.415336 ! Inverting map ! Added new window around map position (-10.4, 38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00547974 Jy ! Component: 100 - total flux cleaned = 0.00822552 Jy ! Component: 150 - total flux cleaned = 0.0100852 Jy ! Component: 200 - total flux cleaned = 0.0111933 Jy ! Total flux subtracted in 200 components = 0.0111933 Jy ! Clean residual min=-0.004957 max=0.005553 Jy/beam ! Clean residual mean=0.000005 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.223357 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 99 components and 0.223357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061409Jy sigma=1.402837 ! Fit after self-cal, rms=0.061319Jy sigma=1.400614 ! Inverting map ! Added new window around map position (12.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493391 Jy ! Component: 100 - total flux cleaned = 0.00716472 Jy ! Component: 150 - total flux cleaned = 0.0085785 Jy ! Component: 200 - total flux cleaned = 0.00971242 Jy ! Total flux subtracted in 200 components = 0.00971242 Jy ! Clean residual min=-0.004424 max=0.004740 Jy/beam ! Clean residual mean=0.000005 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.233069 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 126 components and 0.233069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.060834Jy sigma=1.388782 ! Fit after self-cal, rms=0.060810Jy sigma=1.388147 ! Inverting map ! Added new window around map position (-35.2, -34.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423795 Jy ! Component: 100 - total flux cleaned = 0.00603182 Jy ! Component: 150 - total flux cleaned = 0.00709838 Jy ! Component: 200 - total flux cleaned = 0.00774867 Jy ! Total flux subtracted in 200 components = 0.00774867 Jy ! Clean residual min=-0.003901 max=0.004149 Jy/beam ! Clean residual mean=0.000003 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.240818 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 158 components and 0.240818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.060476Jy sigma=1.378848 ! Fit after self-cal, rms=0.060456Jy sigma=1.378244 ! Inverting map ! Added new window around map position (10.4, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350553 Jy ! Component: 100 - total flux cleaned = 0.0048477 Jy ! Component: 150 - total flux cleaned = 0.00575192 Jy ! Component: 200 - total flux cleaned = 0.00645956 Jy ! Total flux subtracted in 200 components = 0.00645956 Jy ! Clean residual min=-0.003489 max=0.003899 Jy/beam ! Clean residual mean=0.000004 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.247277 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 190 components and 0.247277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.060196Jy sigma=1.372197 ! Fit after self-cal, rms=0.060177Jy sigma=1.371691 ! Inverting map ! Added new window around map position (8.6, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226916 Jy ! Component: 100 - total flux cleaned = 0.00367107 Jy ! Component: 150 - total flux cleaned = 0.00461128 Jy ! Component: 200 - total flux cleaned = 0.00519957 Jy ! Total flux subtracted in 200 components = 0.00519957 Jy ! Clean residual min=-0.003123 max=0.003483 Jy/beam ! Clean residual mean=0.000004 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.252477 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 221 components and 0.252477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059905Jy sigma=1.365692 ! Fit after self-cal, rms=0.059895Jy sigma=1.365355 ! Inverting map ! Added new window around map position (6, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030585 Jy ! Component: 100 - total flux cleaned = 0.00408256 Jy ! Component: 150 - total flux cleaned = 0.00475357 Jy ! Component: 200 - total flux cleaned = 0.00543868 Jy ! Total flux subtracted in 200 components = 0.00543868 Jy ! Clean residual min=-0.002912 max=0.002807 Jy/beam ! Clean residual mean=0.000003 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.257915 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 246 components and 0.257915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059683Jy sigma=1.359909 ! Fit after self-cal, rms=0.059674Jy sigma=1.359630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059674Jy sigma=1.359630 ! Fit after self-cal, rms=0.060093Jy sigma=1.335296 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8501 mas, bmaj=1.995 mas, bpa=-1.586 degrees ! Estimated noise=0.288134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000844145 Jy ! Component: 100 - total flux cleaned = -0.00148791 Jy ! Component: 150 - total flux cleaned = -0.00202973 Jy ! Component: 200 - total flux cleaned = -0.00217582 Jy ! Total flux subtracted in 200 components = -0.00217582 Jy ! Clean residual min=-0.002062 max=0.001975 Jy/beam ! Clean residual mean=0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.25574 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 274 components and 0.25574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059976Jy sigma=1.332418 ! Fit after self-cal, rms=0.059984Jy sigma=1.332200 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000304024 Jy ! Component: 100 - total flux cleaned = -0.000215671 Jy ! Component: 150 - total flux cleaned = -5.89663e-05 Jy ! Component: 200 - total flux cleaned = -2.2144e-05 Jy ! Total flux subtracted in 200 components = -2.2144e-05 Jy ! Clean residual min=-0.002037 max=0.001870 Jy/beam ! Clean residual mean=0.000002 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.255718 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 291 components and 0.255718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059936Jy sigma=1.331010 ! Fit after self-cal, rms=0.059932Jy sigma=1.330978 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059932Jy sigma=1.330978 ! Fit after self-cal, rms=0.060056Jy sigma=1.330505 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.032 mas, bmaj=2.881 mas, bpa=-0.8182 degrees ! Estimated noise=0.375192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000877431 Jy ! Component: 100 - total flux cleaned = -0.00117934 Jy ! Component: 150 - total flux cleaned = -0.00127653 Jy ! Component: 200 - total flux cleaned = -0.00119044 Jy ! Total flux subtracted in 200 components = -0.00119044 Jy ! Clean residual min=-0.002649 max=0.002132 Jy/beam ! Clean residual mean=0.000005 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.254527 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 318 components and 0.254527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.060007Jy sigma=1.329485 ! Fit after self-cal, rms=0.060004Jy sigma=1.329388 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148196 Jy ! Component: 100 - total flux cleaned = 2.7195e-05 Jy ! Component: 150 - total flux cleaned = 0.000156329 Jy ! Component: 200 - total flux cleaned = 0.000216624 Jy ! Total flux subtracted in 200 components = 0.000216624 Jy ! Clean residual min=-0.002611 max=0.002148 Jy/beam ! Clean residual mean=0.000005 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.254744 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 332 components and 0.254744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059991Jy sigma=1.329063 ! Fit after self-cal, rms=0.059989Jy sigma=1.329044 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8503 mas, bmaj=1.995 mas, bpa=-1.595 degrees ! Estimated noise=0.28785 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8503 x 1.995 at -1.595 degrees (North through East) ! Clean map min=-0.002212 max=0.17572 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.688 mas, bmaj=1.724 mas, bpa=-1.887 degrees ! Estimated noise=0.51249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138829 Jy ! Component: 100 - total flux cleaned = 0.169175 Jy ! Component: 150 - total flux cleaned = 0.179165 Jy ! Component: 200 - total flux cleaned = 0.184117 Jy ! Total flux subtracted in 200 components = 0.184117 Jy ! Clean residual min=-0.003907 max=0.004635 Jy/beam ! Clean residual mean=0.000000 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.184117 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.184117 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8503 mas, bmaj=1.995 mas, bpa=-1.595 degrees ! Estimated noise=0.28785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708121 Jy ! Component: 100 - total flux cleaned = 0.0124918 Jy ! Component: 150 - total flux cleaned = 0.0170802 Jy ! Component: 200 - total flux cleaned = 0.0211343 Jy ! Total flux subtracted in 200 components = 0.0211343 Jy ! Clean residual min=-0.003156 max=0.003866 Jy/beam ! Clean residual mean=0.000001 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.205251 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 82 components and 0.205251 Jy ! Inverting map ! Added new window around map position (23, 41). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399705 Jy ! Component: 100 - total flux cleaned = 0.00728552 Jy ! Component: 150 - total flux cleaned = 0.00991898 Jy ! Component: 200 - total flux cleaned = 0.0124441 Jy ! Total flux subtracted in 200 components = 0.0124441 Jy ! Clean residual min=-0.002766 max=0.003005 Jy/beam ! Clean residual mean=0.000001 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.217696 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 114 components and 0.217696 Jy ! Inverting map ! Added new window around map position (26.4, -39.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289112 Jy ! Component: 100 - total flux cleaned = 0.00494265 Jy ! Component: 150 - total flux cleaned = 0.00675269 Jy ! Component: 200 - total flux cleaned = 0.00851251 Jy ! Total flux subtracted in 200 components = 0.00851251 Jy ! Clean residual min=-0.002376 max=0.002384 Jy/beam ! Clean residual mean=0.000001 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.226208 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 144 components and 0.226208 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.032 mas, bmaj=2.881 mas, bpa=-0.8182 degrees ! Estimated noise=0.375192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329307 Jy ! Component: 100 - total flux cleaned = 0.00583549 Jy ! Component: 150 - total flux cleaned = 0.00803513 Jy ! Component: 200 - total flux cleaned = 0.00998931 Jy ! Total flux subtracted in 200 components = 0.00998931 Jy ! Clean residual min=-0.002806 max=0.003019 Jy/beam ! Clean residual mean=0.000003 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.236197 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174859 Jy ! Component: 100 - total flux cleaned = 0.00301725 Jy ! Component: 150 - total flux cleaned = 0.00412662 Jy ! Component: 200 - total flux cleaned = 0.00510133 Jy ! Total flux subtracted in 200 components = 0.00510133 Jy ! Clean residual min=-0.002652 max=0.002494 Jy/beam ! Clean residual mean=0.000003 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.241299 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 221 components and 0.241299 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8503 mas, bmaj=1.995 mas, bpa=-1.595 degrees ! Estimated noise=0.28785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589983 Jy ! Component: 100 - total flux cleaned = 0.00120374 Jy ! Component: 150 - total flux cleaned = 0.00177112 Jy ! Component: 200 - total flux cleaned = 0.00234625 Jy ! Total flux subtracted in 200 components = 0.00234625 Jy ! Clean residual min=-0.002046 max=0.001622 Jy/beam ! Clean residual mean=0.000002 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.243645 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 243 components and 0.243645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.060074Jy sigma=1.330998 ! Fit after self-cal, rms=0.060042Jy sigma=1.330378 wmodel /scr/pima/bg219b_uvs/J0613+1708_X_map.mod ! Writing 243 model components to file: /scr/pima/bg219b_uvs/J0613+1708_X_map.mod wobs /scr/pima/bg219b_uvs/J0613+1708_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219b_uvs/J0613+1708_X_uvs.fits wwins /scr/pima/bg219b_uvs/J0613+1708_X_map.win ! wwins: Wrote 11 windows to /scr/pima/bg219b_uvs/J0613+1708_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000632705 Jy ! Component: 100 - total flux cleaned = -0.00097661 Jy ! Component: 150 - total flux cleaned = -0.00124476 Jy ! Component: 200 - total flux cleaned = -0.00141581 Jy ! Component: 250 - total flux cleaned = -0.00149816 Jy ! Component: 300 - total flux cleaned = -0.0016845 Jy ! Component: 350 - total flux cleaned = -0.00189203 Jy ! Component: 400 - total flux cleaned = -0.00216951 Jy ! Component: 450 - total flux cleaned = -0.00239038 Jy ! Component: 500 - total flux cleaned = -0.00258168 Jy ! Component: 550 - total flux cleaned = -0.00279156 Jy ! Component: 600 - total flux cleaned = -0.00301997 Jy ! Component: 650 - total flux cleaned = -0.0031766 Jy ! Component: 700 - total flux cleaned = -0.00332925 Jy ! Component: 750 - total flux cleaned = -0.00339338 Jy ! Component: 800 - total flux cleaned = -0.00349822 Jy ! Component: 850 - total flux cleaned = -0.00353898 Jy ! Component: 900 - total flux cleaned = -0.00353895 Jy ! Component: 950 - total flux cleaned = -0.00359865 Jy ! Component: 1000 - total flux cleaned = -0.00359847 Jy ! Component: 1050 - total flux cleaned = -0.00363679 Jy ! Component: 1100 - total flux cleaned = -0.00369307 Jy ! Component: 1150 - total flux cleaned = -0.00369252 Jy ! Component: 1200 - total flux cleaned = -0.00374743 Jy ! Component: 1250 - total flux cleaned = -0.0037116 Jy ! Component: 1300 - total flux cleaned = -0.00381828 Jy ! Component: 1350 - total flux cleaned = -0.00380095 Jy ! Component: 1400 - total flux cleaned = -0.00383554 Jy ! Component: 1450 - total flux cleaned = -0.00388659 Jy ! Component: 1500 - total flux cleaned = -0.00395395 Jy ! Component: 1550 - total flux cleaned = -0.00398703 Jy ! Component: 1600 - total flux cleaned = -0.00400327 Jy ! Component: 1650 - total flux cleaned = -0.00406778 Jy ! Component: 1700 - total flux cleaned = -0.00406809 Jy ! Component: 1750 - total flux cleaned = -0.00406783 Jy ! Component: 1800 - total flux cleaned = -0.00403656 Jy ! Component: 1850 - total flux cleaned = -0.00411288 Jy ! Component: 1900 - total flux cleaned = -0.0040219 Jy ! Component: 1950 - total flux cleaned = -0.00400669 Jy ! Component: 2000 - total flux cleaned = -0.00397711 Jy ! Component: 2050 - total flux cleaned = -0.00402065 Jy ! Component: 2100 - total flux cleaned = -0.00399167 Jy ! Component: 2150 - total flux cleaned = -0.00393473 Jy ! Component: 2200 - total flux cleaned = -0.00399107 Jy ! Component: 2250 - total flux cleaned = -0.0039631 Jy ! Component: 2300 - total flux cleaned = -0.00397698 Jy ! Component: 2350 - total flux cleaned = -0.003936 Jy ! Component: 2400 - total flux cleaned = -0.00393641 Jy ! Component: 2450 - total flux cleaned = -0.0039497 Jy ! Component: 2500 - total flux cleaned = -0.00387033 Jy ! Component: 2550 - total flux cleaned = -0.00389641 Jy ! Component: 2600 - total flux cleaned = -0.00393506 Jy ! Component: 2650 - total flux cleaned = -0.00387084 Jy ! Component: 2700 - total flux cleaned = -0.00390871 Jy ! Component: 2750 - total flux cleaned = -0.00390846 Jy ! Component: 2800 - total flux cleaned = -0.00389574 Jy ! Component: 2850 - total flux cleaned = -0.0038713 Jy ! Component: 2900 - total flux cleaned = -0.00390798 Jy ! Component: 2950 - total flux cleaned = -0.00398036 Jy ! Component: 3000 - total flux cleaned = -0.00395665 Jy ! Component: 3050 - total flux cleaned = -0.00395665 Jy ! Component: 3100 - total flux cleaned = -0.0039686 Jy ! Component: 3150 - total flux cleaned = -0.00399185 Jy ! Component: 3200 - total flux cleaned = -0.00399182 Jy ! Component: 3250 - total flux cleaned = -0.00401475 Jy ! Component: 3300 - total flux cleaned = -0.00401464 Jy ! Component: 3350 - total flux cleaned = -0.00403728 Jy ! Component: 3400 - total flux cleaned = -0.00402618 Jy ! Component: 3450 - total flux cleaned = -0.00409241 Jy ! Component: 3500 - total flux cleaned = -0.0040485 Jy ! Component: 3550 - total flux cleaned = -0.0040703 Jy ! Component: 3600 - total flux cleaned = -0.00410258 Jy ! Component: 3650 - total flux cleaned = -0.0041347 Jy ! Component: 3700 - total flux cleaned = -0.00411347 Jy ! Component: 3750 - total flux cleaned = -0.00409228 Jy ! Component: 3800 - total flux cleaned = -0.00409223 Jy ! Component: 3850 - total flux cleaned = -0.00407152 Jy ! Component: 3900 - total flux cleaned = -0.00407157 Jy ! Component: 3950 - total flux cleaned = -0.00401004 Jy ! Component: 4000 - total flux cleaned = -0.00404056 Jy ! Component: 4050 - total flux cleaned = -0.00404063 Jy ! Total flux subtracted in 4096 components = -0.00403065 Jy ! Clean residual min=-0.000576 max=0.000662 Jy/beam ! Clean residual mean=0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.239614 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 560 components and 0.239614 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219b_uvs/J0613+1708_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8503 x 1.995 at -1.595 degrees (North through East) ! Clean map min=-0.0020958 max=0.17612 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0613+1708_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.176123 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172264 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.293427 0.293427 0.586853 1.17371 2.34741 4.69483 9.38965 18.7793 37.5586 75.1172 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.176 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1022.4 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J0613+1708_X_uvs.log closed on Thu Apr 7 01:44:31 2016