! Started logfile: /scr/pima/bg219b_uvs/J0541+6745_S_dfm.log on Thu May 19 20:03:09 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J0541+6745_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0541+6745_S_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.793651 visibilities/baseline/integration-bin.
! Found source: J0541+6745
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 8000 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0541+6745_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004305Jy  sigma=22.045904
! Fit after  self-cal, rms=0.925671Jy  sigma=20.309980
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.029 mas, bmaj=8.023 mas, bpa=64.2 degrees
! Estimated noise=0.550545 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0569305 Jy
! Component: 100  -  total flux cleaned = 0.0703192 Jy
! Total flux subtracted in 100 components = 0.0703192 Jy
! Clean residual min=-0.003508 max=0.005276 Jy/beam
! Clean residual mean=-0.000023 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.0703192 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0703192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064798Jy  sigma=1.346780
! Fit after  self-cal, rms=0.064044Jy  sigma=1.333197
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.743 mas, bmaj=9.023 mas, bpa=65.5 degrees
! Estimated noise=0.368364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00807468 Jy
! Component: 100  -  total flux cleaned = 0.0114735 Jy
! Component: 150  -  total flux cleaned = 0.0131507 Jy
! Component: 200  -  total flux cleaned = 0.0139737 Jy
! Total flux subtracted in 200 components = 0.0139737 Jy
! Clean residual min=-0.002783 max=0.003085 Jy/beam
! Clean residual mean=-0.000020 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.0842929 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 27 components and 0.0842929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063181Jy  sigma=1.311689
! Fit after  self-cal, rms=0.063200Jy  sigma=1.311352
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.743 x 9.023 at 65.5 degrees (North through East)
! Clean map  min=-0.0027247  max=0.077167 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.99     KP        0.94     
!   LA        0.90     MK        1.08     NL        0.99     OV        0.97     
!   PT        1.05     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.98     KP        0.92     
!   LA        0.97     MK        1.04     NL        1.00     OV        1.04     
!   PT        1.10     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.95     KP        0.92     
!   LA        0.92     MK        0.92     NL        1.02     OV        1.00     
!   PT        1.12     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.12     KP        1.04     
!   LA        0.91     MK        1.00     NL        0.96     OV        1.04     
!   PT        1.04     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.063200Jy  sigma=1.311352
! Fit after  self-cal, rms=0.063003Jy  sigma=1.304732
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.763 mas, bmaj=9.053 mas, bpa=65.47 degrees
! Estimated noise=0.366147 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000580571 Jy
! Component: 100  -  total flux cleaned = -0.000466613 Jy
! Component: 150  -  total flux cleaned = -0.000427805 Jy
! Component: 200  -  total flux cleaned = -0.000391197 Jy
! Total flux subtracted in 200 components = -0.000391197 Jy
! Clean residual min=-0.002459 max=0.002458 Jy/beam
! Clean residual mean=-0.000016 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.0839017 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 35 components and 0.0839017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062981Jy  sigma=1.304381
! Fit after  self-cal, rms=0.063001Jy  sigma=1.304068
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063001Jy  sigma=1.304068
! Fit after  self-cal, rms=0.062561Jy  sigma=1.300197
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.795 mas, bmaj=9.045 mas, bpa=65.57 degrees
! Estimated noise=0.362564 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000983926 Jy
! Component: 100  -  total flux cleaned = -0.00140956 Jy
! Component: 150  -  total flux cleaned = -0.00140944 Jy
! Component: 200  -  total flux cleaned = -0.00142273 Jy
! Total flux subtracted in 200 components = -0.00142273 Jy
! Clean residual min=-0.001840 max=0.002205 Jy/beam
! Clean residual mean=0.000001 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.082479 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 45 components and 0.082479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062542Jy  sigma=1.299896
! Fit after  self-cal, rms=0.062561Jy  sigma=1.299708
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.47286e-05 Jy
! Component: 100  -  total flux cleaned = -6.20356e-05 Jy
! Component: 150  -  total flux cleaned = -3.93051e-05 Jy
! Component: 200  -  total flux cleaned = -1.91584e-05 Jy
! Total flux subtracted in 200 components = -1.91584e-05 Jy
! Clean residual min=-0.001843 max=0.002215 Jy/beam
! Clean residual mean=0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.0824598 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 49 components and 0.0824598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062555Jy  sigma=1.299631
! Fit after  self-cal, rms=0.062555Jy  sigma=1.299619
! Inverting map 
! Added new window around map position (-72.5, 32.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205077 Jy
! Component: 100  -  total flux cleaned = 0.00273315 Jy
! Component: 150  -  total flux cleaned = 0.00302008 Jy
! Component: 200  -  total flux cleaned = 0.00316688 Jy
! Total flux subtracted in 200 components = 0.00316688 Jy
! Clean residual min=-0.001920 max=0.002060 Jy/beam
! Clean residual mean=-0.000002 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.0856267 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.0856267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062476Jy  sigma=1.297878
! Fit after  self-cal, rms=0.062473Jy  sigma=1.297699
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062473Jy  sigma=1.297699
! Fit after  self-cal, rms=0.062456Jy  sigma=1.295777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.799 mas, bmaj=9.013 mas, bpa=65.65 degrees
! Estimated noise=0.362061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000286899 Jy
! Component: 100  -  total flux cleaned = -0.000312865 Jy
! Component: 150  -  total flux cleaned = -0.000333373 Jy
! Component: 200  -  total flux cleaned = -0.000373242 Jy
! Total flux subtracted in 200 components = -0.000373242 Jy
! Clean residual min=-0.001544 max=0.001565 Jy/beam
! Clean residual mean=0.000002 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0852534 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 86 components and 0.0852534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062438Jy  sigma=1.295363
! Fit after  self-cal, rms=0.062450Jy  sigma=1.295272
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.04323e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105642 Jy
! Component: 150  -  total flux cleaned = -0.000168793 Jy
! Component: 200  -  total flux cleaned = -0.000227401 Jy
! Total flux subtracted in 200 components = -0.000227401 Jy
! Clean residual min=-0.001561 max=0.001564 Jy/beam
! Clean residual mean=0.000002 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.085026 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 97 components and 0.085026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062442Jy  sigma=1.295105
! Fit after  self-cal, rms=0.062443Jy  sigma=1.295099
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062443Jy  sigma=1.295099
! Fit after  self-cal, rms=0.062492Jy  sigma=1.295069
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.528 mas, bmaj=11.66 mas, bpa=73.61 degrees
! Estimated noise=0.423169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.57324e-05 Jy
! Component: 100  -  total flux cleaned = 9.79166e-06 Jy
! Component: 150  -  total flux cleaned = -2.42188e-05 Jy
! Component: 200  -  total flux cleaned = -5.56157e-05 Jy
! Total flux subtracted in 200 components = -5.56157e-05 Jy
! Clean residual min=-0.001490 max=0.001713 Jy/beam
! Clean residual mean=0.000005 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.0849704 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 110 components and 0.0849704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062491Jy  sigma=1.295039
! Fit after  self-cal, rms=0.062493Jy  sigma=1.295018
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.69076e-05 Jy
! Component: 100  -  total flux cleaned = -1.09454e-05 Jy
! Component: 150  -  total flux cleaned = -5.46319e-05 Jy
! Component: 200  -  total flux cleaned = -7.87798e-05 Jy
! Total flux subtracted in 200 components = -7.87798e-05 Jy
! Clean residual min=-0.001498 max=0.001677 Jy/beam
! Clean residual mean=0.000005 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.0848916 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 116 components and 0.0848916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062493Jy  sigma=1.295018
! Fit after  self-cal, rms=0.062493Jy  sigma=1.295012
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.8 mas, bmaj=9.011 mas, bpa=65.67 degrees
! Estimated noise=0.362092 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.8 x 9.011 at 65.67 degrees (North through East)
! Clean map  min=-0.0015128  max=0.075911 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.07 mas, bmaj=7.992 mas, bpa=64.5 degrees
! Estimated noise=0.54852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0572046 Jy
! Component: 100  -  total flux cleaned = 0.070296 Jy
! Component: 150  -  total flux cleaned = 0.0758048 Jy
! Component: 200  -  total flux cleaned = 0.0784344 Jy
! Total flux subtracted in 200 components = 0.0784344 Jy
! Clean residual min=-0.002661 max=0.002893 Jy/beam
! Clean residual mean=-0.000003 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.0784344 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0784344 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.8 mas, bmaj=9.011 mas, bpa=65.67 degrees
! Estimated noise=0.362092 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00301962 Jy
! Component: 100  -  total flux cleaned = 0.003967 Jy
! Component: 150  -  total flux cleaned = 0.00437713 Jy
! Component: 200  -  total flux cleaned = 0.0047721 Jy
! Total flux subtracted in 200 components = 0.0047721 Jy
! Clean residual min=-0.001562 max=0.001736 Jy/beam
! Clean residual mean=-0.000003 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.0832065 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 39 components and 0.0832065 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.528 mas, bmaj=11.66 mas, bpa=73.61 degrees
! Estimated noise=0.423169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000339641 Jy
! Component: 100  -  total flux cleaned = 0.000714025 Jy
! Component: 150  -  total flux cleaned = 0.00100319 Jy
! Component: 200  -  total flux cleaned = 0.0011611 Jy
! Total flux subtracted in 200 components = 0.0011611 Jy
! Clean residual min=-0.001518 max=0.001743 Jy/beam
! Clean residual mean=0.000003 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.0843676 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101634 Jy
! Component: 100  -  total flux cleaned = 0.000147746 Jy
! Component: 150  -  total flux cleaned = 0.000202699 Jy
! Component: 200  -  total flux cleaned = 0.000240939 Jy
! Total flux subtracted in 200 components = 0.000240939 Jy
! Clean residual min=-0.001516 max=0.001709 Jy/beam
! Clean residual mean=0.000003 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.0846085 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 74 components and 0.0846085 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.8 mas, bmaj=9.011 mas, bpa=65.67 degrees
! Estimated noise=0.362092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000146222 Jy
! Component: 100  -  total flux cleaned = -5.56377e-05 Jy
! Component: 150  -  total flux cleaned = -2.99266e-05 Jy
! Component: 200  -  total flux cleaned = -6.06249e-06 Jy
! Total flux subtracted in 200 components = -6.06249e-06 Jy
! Clean residual min=-0.001545 max=0.001573 Jy/beam
! Clean residual mean=0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0846025 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 91 components and 0.0846025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062520Jy  sigma=1.295503
! Fit after  self-cal, rms=0.062514Jy  sigma=1.295449
wmodel /J0541+6745_S_map.mod
! wmodel: Unable to open new model file: /J0541+6745_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0541+6745_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.8 x 9.011 at 65.67 degrees (North through East)
! Clean map  min=-0.0014984  max=0.075867 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0541+6745_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0758672 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000415704 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.64381 1.64381 3.28762 6.57524 13.1505 26.301 52.6019
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  182.502 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0541+6745_S_dfm.log closed on Thu May 19 20:03:11 2016