! Started logfile: /scr/pima/bg219b_uvs/J0521+2112_X_dfm.log on Thu May 19 20:02:57 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0521+2112_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0521+2112_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.720635 visibilities/baseline/integration-bin.
! Found source: J0521+2112
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10896 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0521+2112_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.058892Jy  sigma=23.990525
! Fit after  self-cal, rms=0.684187Jy  sigma=15.426845
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7187 mas, bmaj=1.436 mas, bpa=-3.512 degrees
! Estimated noise=0.572434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.241183 Jy
! Component: 100  -  total flux cleaned = 0.301183 Jy
! Total flux subtracted in 100 components = 0.301183 Jy
! Clean residual min=-0.015943 max=0.025102 Jy/beam
! Clean residual mean=-0.000014 rms=0.003456 Jy/beam
! Combined flux in latest and established models = 0.301183 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.301183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109706Jy  sigma=2.540495
! Fit after  self-cal, rms=0.109661Jy  sigma=2.538043
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0285167 Jy
! Component: 100  -  total flux cleaned = 0.0434975 Jy
! Total flux subtracted in 100 components = 0.0434975 Jy
! Clean residual min=-0.013831 max=0.015741 Jy/beam
! Clean residual mean=-0.000010 rms=0.002614 Jy/beam
! Combined flux in latest and established models = 0.344681 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.344681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100551Jy  sigma=2.327371
! Fit after  self-cal, rms=0.100474Jy  sigma=2.325249
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9181 mas, bmaj=1.796 mas, bpa=0.001166 degrees
! Estimated noise=0.341365 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21.4, 15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0201235 Jy
! Component: 100  -  total flux cleaned = 0.03091 Jy
! Component: 150  -  total flux cleaned = 0.0377322 Jy
! Component: 200  -  total flux cleaned = 0.0415577 Jy
! Total flux subtracted in 200 components = 0.0415577 Jy
! Clean residual min=-0.010671 max=0.015824 Jy/beam
! Clean residual mean=-0.000009 rms=0.002601 Jy/beam
! Combined flux in latest and established models = 0.386238 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 39 components and 0.386238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096261Jy  sigma=2.230812
! Fit after  self-cal, rms=0.095848Jy  sigma=2.220291
! Inverting map 
! Added new window around map position (-1.4, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131499 Jy
! Component: 100  -  total flux cleaned = 0.0174542 Jy
! Component: 150  -  total flux cleaned = 0.0197948 Jy
! Component: 200  -  total flux cleaned = 0.0219429 Jy
! Total flux subtracted in 200 components = 0.0219429 Jy
! Clean residual min=-0.008682 max=0.011298 Jy/beam
! Clean residual mean=-0.000003 rms=0.002106 Jy/beam
! Combined flux in latest and established models = 0.408181 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 59 components and 0.408181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093420Jy  sigma=2.180980
! Fit after  self-cal, rms=0.093214Jy  sigma=2.176487
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9181 x 1.796 at 0.001166 degrees (North through East)
! Clean map  min=-0.0081921  max=0.31742 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.99     KP        0.93     
!   LA        0.97     MK        0.97     NL        0.97     OV        0.98     
!   PT        1.14     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.98     KP        0.95     
!   LA        0.98     MK        1.02     NL        1.00     OV        1.02     
!   PT        1.17     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.99     KP        0.95     
!   LA        0.96     MK        0.97     NL        0.98     OV        0.99     
!   PT        1.15     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.00     KP        0.95     
!   LA        0.94     MK        0.97     NL        1.00     OV        1.02     
!   PT        1.13     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.96     
!   LA        0.97     MK        1.00     NL        1.01     OV        1.00     
!   PT        1.19     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.06     KP        1.02     
!   LA        0.98     MK        1.01     NL        1.04     OV        1.06     
!   PT        1.20     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        0.97     
!   LA        0.98     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.19     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        0.95     
!   LA        0.96     MK        0.98     NL        1.01     OV        1.01     
!   PT        1.16     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        1.03     KP        0.94     
!   LA        0.94     MK        0.96     NL        0.98     OV        0.95     
!   PT        1.10     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.02     KP        0.92     
!   LA        0.94     MK        0.96     NL        0.97     OV        0.96     
!   PT        1.14     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.92     HN        1.00     KP        0.93     
!   LA        0.96     MK        0.95     NL        0.94     OV        0.90     
!   PT        1.04     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.093214Jy  sigma=2.176487
! Fit after  self-cal, rms=0.089635Jy  sigma=2.098837
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9141 mas, bmaj=1.792 mas, bpa=-0.1788 degrees
! Estimated noise=0.341249 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270903 Jy
! Component: 100  -  total flux cleaned = 0.00279301 Jy
! Component: 150  -  total flux cleaned = 0.00164279 Jy
! Component: 200  -  total flux cleaned = 0.000646511 Jy
! Total flux subtracted in 200 components = 0.000646511 Jy
! Clean residual min=-0.005711 max=0.006380 Jy/beam
! Clean residual mean=0.000004 rms=0.001382 Jy/beam
! Combined flux in latest and established models = 0.408828 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 79 components and 0.408828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088983Jy  sigma=2.089920
! Fit after  self-cal, rms=0.088959Jy  sigma=2.088887
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088959Jy  sigma=2.088887
! Fit after  self-cal, rms=0.089966Jy  sigma=2.072309
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9118 mas, bmaj=1.79 mas, bpa=-0.2388 degrees
! Estimated noise=0.341518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000310449 Jy
! Component: 100  -  total flux cleaned = -0.000907785 Jy
! Component: 150  -  total flux cleaned = -0.00160514 Jy
! Component: 200  -  total flux cleaned = -0.00237425 Jy
! Total flux subtracted in 200 components = -0.00237425 Jy
! Clean residual min=-0.005398 max=0.005915 Jy/beam
! Clean residual mean=-0.000002 rms=0.001234 Jy/beam
! Combined flux in latest and established models = 0.406453 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 92 components and 0.406454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089635Jy  sigma=2.067721
! Fit after  self-cal, rms=0.089603Jy  sigma=2.067212
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00610313 Jy
! Component: 100  -  total flux cleaned = 0.00976606 Jy
! Component: 150  -  total flux cleaned = 0.0114442 Jy
! Component: 200  -  total flux cleaned = 0.0125542 Jy
! Total flux subtracted in 200 components = 0.0125542 Jy
! Clean residual min=-0.005164 max=0.004249 Jy/beam
! Clean residual mean=-0.000004 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.419008 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 113 components and 0.419008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089076Jy  sigma=2.056771
! Fit after  self-cal, rms=0.089049Jy  sigma=2.056199
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089049Jy  sigma=2.056199
! Fit after  self-cal, rms=0.088997Jy  sigma=2.055423
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.911 mas, bmaj=1.791 mas, bpa=-0.3508 degrees
! Estimated noise=0.340646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102431 Jy
! Component: 100  -  total flux cleaned = 0.0022031 Jy
! Component: 150  -  total flux cleaned = 0.0028927 Jy
! Component: 200  -  total flux cleaned = 0.00327446 Jy
! Total flux subtracted in 200 components = 0.00327446 Jy
! Clean residual min=-0.004672 max=0.003752 Jy/beam
! Clean residual mean=-0.000004 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.422282 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 121 components and 0.422282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088789Jy  sigma=2.052371
! Fit after  self-cal, rms=0.088775Jy  sigma=2.052161
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00072893 Jy
! Component: 100  -  total flux cleaned = 0.00107672 Jy
! Component: 150  -  total flux cleaned = 0.00133325 Jy
! Component: 200  -  total flux cleaned = 0.00157467 Jy
! Total flux subtracted in 200 components = 0.00157467 Jy
! Clean residual min=-0.004406 max=0.003667 Jy/beam
! Clean residual mean=-0.000005 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.423857 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 132 components and 0.423857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088661Jy  sigma=2.050721
! Fit after  self-cal, rms=0.088655Jy  sigma=2.050621
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088655Jy  sigma=2.050621
! Fit after  self-cal, rms=0.088800Jy  sigma=2.050185
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.912 mas, bmaj=2.747 mas, bpa=3.449 degrees
! Estimated noise=0.438901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154279 Jy
! Component: 100  -  total flux cleaned = 0.00214085 Jy
! Component: 150  -  total flux cleaned = 0.00253719 Jy
! Component: 200  -  total flux cleaned = 0.00295561 Jy
! Total flux subtracted in 200 components = 0.00295561 Jy
! Clean residual min=-0.004695 max=0.005477 Jy/beam
! Clean residual mean=-0.000012 rms=0.001308 Jy/beam
! Combined flux in latest and established models = 0.426813 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 145 components and 0.426813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088703Jy  sigma=2.049452
! Fit after  self-cal, rms=0.088686Jy  sigma=2.048972
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112267 Jy
! Component: 100  -  total flux cleaned = 0.00149001 Jy
! Component: 150  -  total flux cleaned = 0.00186792 Jy
! Component: 200  -  total flux cleaned = 0.0020957 Jy
! Total flux subtracted in 200 components = 0.0020957 Jy
! Clean residual min=-0.004666 max=0.004790 Jy/beam
! Clean residual mean=-0.000013 rms=0.001246 Jy/beam
! Combined flux in latest and established models = 0.428908 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 155 components and 0.428908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088672Jy  sigma=2.049196
! Fit after  self-cal, rms=0.088666Jy  sigma=2.049030
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9105 mas, bmaj=1.791 mas, bpa=-0.4065 degrees
! Estimated noise=0.340617 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9105 x 1.791 at -0.4065 degrees (North through East)
! Clean map  min=-0.0042727  max=0.31853 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7142 mas, bmaj=1.437 mas, bpa=-3.895 degrees
! Estimated noise=0.563381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.236859 Jy
! Component: 100  -  total flux cleaned = 0.299988 Jy
! Component: 150  -  total flux cleaned = 0.330504 Jy
! Component: 200  -  total flux cleaned = 0.348696 Jy
! Total flux subtracted in 200 components = 0.348696 Jy
! Clean residual min=-0.006906 max=0.009584 Jy/beam
! Clean residual mean=-0.000008 rms=0.001830 Jy/beam
! Combined flux in latest and established models = 0.348696 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.348696 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9105 mas, bmaj=1.791 mas, bpa=-0.4065 degrees
! Estimated noise=0.340617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181419 Jy
! Component: 100  -  total flux cleaned = 0.0302939 Jy
! Component: 150  -  total flux cleaned = 0.039609 Jy
! Component: 200  -  total flux cleaned = 0.0471913 Jy
! Total flux subtracted in 200 components = 0.0471913 Jy
! Clean residual min=-0.005248 max=0.005984 Jy/beam
! Clean residual mean=-0.000006 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.395887 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 44 components and 0.395887 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.912 mas, bmaj=2.747 mas, bpa=3.449 degrees
! Estimated noise=0.438901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112453 Jy
! Component: 100  -  total flux cleaned = 0.01912 Jy
! Component: 150  -  total flux cleaned = 0.0240586 Jy
! Component: 200  -  total flux cleaned = 0.0259057 Jy
! Total flux subtracted in 200 components = 0.0259057 Jy
! Clean residual min=-0.005108 max=0.005928 Jy/beam
! Clean residual mean=-0.000010 rms=0.001558 Jy/beam
! Combined flux in latest and established models = 0.421793 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155339 Jy
! Component: 100  -  total flux cleaned = 0.00299877 Jy
! Component: 150  -  total flux cleaned = 0.00422832 Jy
! Component: 200  -  total flux cleaned = 0.00490989 Jy
! Total flux subtracted in 200 components = 0.00490989 Jy
! Clean residual min=-0.004627 max=0.005022 Jy/beam
! Clean residual mean=-0.000011 rms=0.001324 Jy/beam
! Combined flux in latest and established models = 0.426703 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 88 components and 0.426703 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9105 mas, bmaj=1.791 mas, bpa=-0.4065 degrees
! Estimated noise=0.340617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148285 Jy
! Component: 100  -  total flux cleaned = 0.00117304 Jy
! Component: 150  -  total flux cleaned = 0.00116962 Jy
! Component: 200  -  total flux cleaned = 0.00125376 Jy
! Total flux subtracted in 200 components = 0.00125376 Jy
! Clean residual min=-0.004255 max=0.003326 Jy/beam
! Clean residual mean=-0.000005 rms=0.000857 Jy/beam
! Combined flux in latest and established models = 0.427957 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 109 components and 0.427957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088869Jy  sigma=2.052041
! Fit after  self-cal, rms=0.088819Jy  sigma=2.050913
wmodel /J0521+2112_X_map.mod
! wmodel: Unable to open new model file: /J0521+2112_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0521+2112_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9105 x 1.791 at -0.4065 degrees (North through East)
! Clean map  min=-0.0038215  max=0.319 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0521+2112_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.318995 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000845575 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.795223 0.795223 1.59045 3.18089 6.36179 12.7236 25.4471 50.8943
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.318 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  377.252 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0521+2112_X_dfm.log closed on Thu May 19 20:02:59 2016