! Started logfile: /scr/pima/bg219b_uvs/J0516+2743_X_dfm.log on Thu May 19 20:02:49 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0516+2743_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0516+2743_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.818803 visibilities/baseline/integration-bin.
! Found source: J0516+2743
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22992 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0516+2743_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006089Jy  sigma=24.204787
! Fit after  self-cal, rms=0.920508Jy  sigma=22.121635
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7716 mas, bmaj=1.394 mas, bpa=-7.19 degrees
! Estimated noise=0.438117 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0608009 Jy
! Component: 100  -  total flux cleaned = 0.0771162 Jy
! Total flux subtracted in 100 components = 0.0771162 Jy
! Clean residual min=-0.004538 max=0.006469 Jy/beam
! Clean residual mean=0.000006 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.0771162 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0771162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066492Jy  sigma=1.447740
! Fit after  self-cal, rms=0.065864Jy  sigma=1.434147
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00728341 Jy
! Component: 100  -  total flux cleaned = 0.0111086 Jy
! Total flux subtracted in 100 components = 0.0111086 Jy
! Clean residual min=-0.004263 max=0.006022 Jy/beam
! Clean residual mean=0.000006 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.0882248 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 13 components and 0.0882248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064934Jy  sigma=1.404869
! Fit after  self-cal, rms=0.064925Jy  sigma=1.404573
! Inverting map 
! Added new window around map position (-1.4, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00523956 Jy
! Component: 100  -  total flux cleaned = 0.00753805 Jy
! Total flux subtracted in 100 components = 0.00753805 Jy
! Clean residual min=-0.003738 max=0.004573 Jy/beam
! Clean residual mean=0.000005 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.0957628 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.0957628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064523Jy  sigma=1.393714
! Fit after  self-cal, rms=0.064469Jy  sigma=1.392268
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.738 mas, bpa=-5.522 degrees
! Estimated noise=0.208181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204914 Jy
! Component: 100  -  total flux cleaned = 0.00246525 Jy
! Component: 150  -  total flux cleaned = 0.00249921 Jy
! Component: 200  -  total flux cleaned = 0.00252654 Jy
! Total flux subtracted in 200 components = 0.00252654 Jy
! Clean residual min=-0.002309 max=0.003387 Jy/beam
! Clean residual mean=0.000012 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.0982894 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 32 components and 0.0982894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064404Jy  sigma=1.390326
! Fit after  self-cal, rms=0.064400Jy  sigma=1.390076
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.016 x 1.738 at -5.522 degrees (North through East)
! Clean map  min=-0.0021309  max=0.080819 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.02     KP        0.94     
!   LA        0.95     MK        1.02     NL        0.99     OV        0.97     
!   PT        1.19     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     HN        1.02     KP        1.01     
!   LA        0.98     MK        1.08     NL        0.99     OV        1.03     
!   PT        1.19     SC        1.14     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.95     HN        0.96     KP        0.94     
!   LA        0.93     MK        0.91     NL        0.96     OV        0.96     
!   PT        1.18     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.98     KP        0.89     
!   LA        0.94     MK        0.86     NL        0.97     OV        0.98     
!   PT        1.17     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.87     HN        0.91     KP        0.93     
!   LA        0.93     MK        0.99     NL        0.93     OV        0.90     
!   PT        1.14     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.064400Jy  sigma=1.390076
! Fit after  self-cal, rms=0.063069Jy  sigma=1.382240
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.736 mas, bpa=-5.686 degrees
! Estimated noise=0.204836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000482545 Jy
! Component: 100  -  total flux cleaned = -0.000556237 Jy
! Component: 150  -  total flux cleaned = -0.000632188 Jy
! Component: 200  -  total flux cleaned = -0.000717048 Jy
! Total flux subtracted in 200 components = -0.000717048 Jy
! Clean residual min=-0.001847 max=0.002513 Jy/beam
! Clean residual mean=0.000009 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.0975723 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 44 components and 0.0975723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063045Jy  sigma=1.381813
! Fit after  self-cal, rms=0.063080Jy  sigma=1.381597
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063080Jy  sigma=1.381597
! Fit after  self-cal, rms=0.062991Jy  sigma=1.380744
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.737 mas, bpa=-5.757 degrees
! Estimated noise=0.204118 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000278159 Jy
! Component: 100  -  total flux cleaned = -0.000309094 Jy
! Component: 150  -  total flux cleaned = -0.000362667 Jy
! Component: 200  -  total flux cleaned = -0.000410851 Jy
! Total flux subtracted in 200 components = -0.000410851 Jy
! Clean residual min=-0.001678 max=0.002548 Jy/beam
! Clean residual mean=0.000009 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.0971614 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 47 components and 0.0971614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062982Jy  sigma=1.380606
! Fit after  self-cal, rms=0.062988Jy  sigma=1.380568
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24.4, -25).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249934 Jy
! Component: 100  -  total flux cleaned = 0.0040199 Jy
! Component: 150  -  total flux cleaned = 0.00492938 Jy
! Component: 200  -  total flux cleaned = 0.00541977 Jy
! Total flux subtracted in 200 components = 0.00541977 Jy
! Clean residual min=-0.001648 max=0.002015 Jy/beam
! Clean residual mean=0.000007 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.102581 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 77 components and 0.102581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062884Jy  sigma=1.377334
! Fit after  self-cal, rms=0.062880Jy  sigma=1.376882
! Inverting map 
! Added new window around map position (17.4, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180429 Jy
! Component: 100  -  total flux cleaned = 0.00284088 Jy
! Component: 150  -  total flux cleaned = 0.00343572 Jy
! Component: 200  -  total flux cleaned = 0.0038345 Jy
! Total flux subtracted in 200 components = 0.0038345 Jy
! Clean residual min=-0.001512 max=0.001668 Jy/beam
! Clean residual mean=0.000005 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.106416 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 98 components and 0.106416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062821Jy  sigma=1.375165
! Fit after  self-cal, rms=0.062821Jy  sigma=1.375011
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062821Jy  sigma=1.375011
! Fit after  self-cal, rms=0.062832Jy  sigma=1.371397
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.738 mas, bpa=-5.723 degrees
! Estimated noise=0.204338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258063 Jy
! Component: 100  -  total flux cleaned = 0.000465549 Jy
! Component: 150  -  total flux cleaned = 0.000653861 Jy
! Component: 200  -  total flux cleaned = 0.000806964 Jy
! Total flux subtracted in 200 components = 0.000806964 Jy
! Clean residual min=-0.001292 max=0.001389 Jy/beam
! Clean residual mean=0.000002 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.107223 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 107 components and 0.107223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062816Jy  sigma=1.371062
! Fit after  self-cal, rms=0.062827Jy  sigma=1.370945
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220947 Jy
! Component: 100  -  total flux cleaned = 0.000329564 Jy
! Component: 150  -  total flux cleaned = 0.000432053 Jy
! Component: 200  -  total flux cleaned = 0.000527787 Jy
! Total flux subtracted in 200 components = 0.000527787 Jy
! Clean residual min=-0.001254 max=0.001367 Jy/beam
! Clean residual mean=0.000002 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.10775 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 112 components and 0.10775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062817Jy  sigma=1.370745
! Fit after  self-cal, rms=0.062819Jy  sigma=1.370741
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062819Jy  sigma=1.370741
! Fit after  self-cal, rms=0.062845Jy  sigma=1.370006
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.289 mas, bmaj=2.701 mas, bpa=1.846 degrees
! Estimated noise=0.247653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000209812 Jy
! Component: 100  -  total flux cleaned = 0.000305139 Jy
! Component: 150  -  total flux cleaned = 0.00038708 Jy
! Component: 200  -  total flux cleaned = 0.000430914 Jy
! Total flux subtracted in 200 components = 0.000430914 Jy
! Clean residual min=-0.001470 max=0.001613 Jy/beam
! Clean residual mean=0.000004 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.108181 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 120 components and 0.108181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062842Jy  sigma=1.369902
! Fit after  self-cal, rms=0.062845Jy  sigma=1.369866
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000146757 Jy
! Component: 100  -  total flux cleaned = 0.000173989 Jy
! Component: 150  -  total flux cleaned = 0.000149163 Jy
! Component: 200  -  total flux cleaned = 0.000160983 Jy
! Total flux subtracted in 200 components = 0.000160983 Jy
! Clean residual min=-0.001464 max=0.001566 Jy/beam
! Clean residual mean=0.000003 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.108342 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 127 components and 0.108342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062844Jy  sigma=1.369825
! Fit after  self-cal, rms=0.062844Jy  sigma=1.369819
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.738 mas, bpa=-5.793 degrees
! Estimated noise=0.204143 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 1.738 at -5.793 degrees (North through East)
! Clean map  min=-0.0011452  max=0.078357 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7695 mas, bmaj=1.397 mas, bpa=-7.495 degrees
! Estimated noise=0.425237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0593265 Jy
! Component: 100  -  total flux cleaned = 0.0759614 Jy
! Component: 150  -  total flux cleaned = 0.0842082 Jy
! Component: 200  -  total flux cleaned = 0.0892633 Jy
! Total flux subtracted in 200 components = 0.0892633 Jy
! Clean residual min=-0.003156 max=0.003152 Jy/beam
! Clean residual mean=0.000004 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.0892632 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0892632 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.738 mas, bpa=-5.793 degrees
! Estimated noise=0.204143 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468366 Jy
! Component: 100  -  total flux cleaned = 0.00773613 Jy
! Component: 150  -  total flux cleaned = 0.0100298 Jy
! Component: 200  -  total flux cleaned = 0.0118426 Jy
! Total flux subtracted in 200 components = 0.0118426 Jy
! Clean residual min=-0.001504 max=0.001584 Jy/beam
! Clean residual mean=0.000005 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.101106 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 42 components and 0.101106 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.289 mas, bmaj=2.701 mas, bpa=1.846 degrees
! Estimated noise=0.247653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210225 Jy
! Component: 100  -  total flux cleaned = 0.00361729 Jy
! Component: 150  -  total flux cleaned = 0.00478576 Jy
! Component: 200  -  total flux cleaned = 0.00569861 Jy
! Total flux subtracted in 200 components = 0.00569861 Jy
! Clean residual min=-0.001529 max=0.001782 Jy/beam
! Clean residual mean=0.000006 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.106804 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000621565 Jy
! Component: 100  -  total flux cleaned = 0.000874278 Jy
! Component: 150  -  total flux cleaned = 0.00112211 Jy
! Component: 200  -  total flux cleaned = 0.00126604 Jy
! Total flux subtracted in 200 components = 0.00126604 Jy
! Clean residual min=-0.001458 max=0.001649 Jy/beam
! Clean residual mean=0.000005 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.10807 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 94 components and 0.10807 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.738 mas, bpa=-5.793 degrees
! Estimated noise=0.204143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000416198 Jy
! Component: 100  -  total flux cleaned = 0.000667712 Jy
! Component: 150  -  total flux cleaned = 0.000817382 Jy
! Component: 200  -  total flux cleaned = 0.000953004 Jy
! Total flux subtracted in 200 components = 0.000953004 Jy
! Clean residual min=-0.001267 max=0.001383 Jy/beam
! Clean residual mean=0.000002 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.109023 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 110 components and 0.109023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062872Jy  sigma=1.370477
! Fit after  self-cal, rms=0.062866Jy  sigma=1.370349
wmodel /J0516+2743_X_map.mod
! wmodel: Unable to open new model file: /J0516+2743_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0516+2743_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 1.738 at -5.793 degrees (North through East)
! Clean map  min=-0.0011713  max=0.078122 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0516+2743_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0781216 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000313172 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.20263 1.20263 2.40526 4.81053 9.62105 19.2421 38.4842 76.9684
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.078 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  249.453 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0516+2743_X_dfm.log closed on Thu May 19 20:02:52 2016