! Started logfile: /scr/pima/bg219b_uvs/J0453-3949_S_dfm.log on Thu May 19 20:02:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J0453-3949_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0453-3949_S_uva.fits
! AN table 1: 61 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.785324 visibilities/baseline/integration-bin.
! Found source: J0453-3949
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4024 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0453-3949_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010081Jy  sigma=14.856717
! Fit after  self-cal, rms=0.922096Jy  sigma=13.661060
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.996 mas, bmaj=26.82 mas, bpa=9.898 degrees
! Estimated noise=1.28298 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0624796 Jy
! Component: 100  -  total flux cleaned = 0.0762131 Jy
! Total flux subtracted in 100 components = 0.0762131 Jy
! Clean residual min=-0.005960 max=0.006443 Jy/beam
! Clean residual mean=0.000052 rms=0.001761 Jy/beam
! Combined flux in latest and established models = 0.076213 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.076213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089528Jy  sigma=1.265495
! Fit after  self-cal, rms=0.088341Jy  sigma=1.247284
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.891 mas, bmaj=28.99 mas, bpa=8.677 degrees
! Estimated noise=0.818302 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00688642 Jy
! Component: 100  -  total flux cleaned = 0.00975383 Jy
! Component: 150  -  total flux cleaned = 0.0111896 Jy
! Component: 200  -  total flux cleaned = 0.0114809 Jy
! Total flux subtracted in 200 components = 0.0114809 Jy
! Clean residual min=-0.005412 max=0.005105 Jy/beam
! Clean residual mean=0.000012 rms=0.001482 Jy/beam
! Combined flux in latest and established models = 0.0876939 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 42 components and 0.0876939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087876Jy  sigma=1.239816
! Fit after  self-cal, rms=0.087923Jy  sigma=1.239647
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.891 x 28.99 at 8.677 degrees (North through East)
! Clean map  min=-0.0053806  max=0.082137 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     KP        0.92     LA        0.91     NL        1.02     
!   OV        1.06     PT        1.19     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        1.03     LA        0.91     NL        1.15     
!   OV        0.94     PT        1.19     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.02     LA        0.90     NL        1.10     
!   OV        0.89     PT        1.10     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.087923Jy  sigma=1.239647
! Fit after  self-cal, rms=0.087572Jy  sigma=1.233115
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.907 mas, bmaj=29.17 mas, bpa=8.691 degrees
! Estimated noise=0.810296 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000977538 Jy
! Component: 100  -  total flux cleaned = -0.00123284 Jy
! Component: 150  -  total flux cleaned = -0.00129751 Jy
! Component: 200  -  total flux cleaned = -0.00133679 Jy
! Total flux subtracted in 200 components = -0.00133679 Jy
! Clean residual min=-0.003590 max=0.004088 Jy/beam
! Clean residual mean=0.000023 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.0863571 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.0863571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087558Jy  sigma=1.232879
! Fit after  self-cal, rms=0.087695Jy  sigma=1.231947
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087695Jy  sigma=1.231947
! Fit after  self-cal, rms=0.087814Jy  sigma=1.231355
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.914 mas, bmaj=29.21 mas, bpa=8.672 degrees
! Estimated noise=0.807727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000348763 Jy
! Component: 100  -  total flux cleaned = -0.000459492 Jy
! Component: 150  -  total flux cleaned = -0.000519258 Jy
! Component: 200  -  total flux cleaned = -0.00059166 Jy
! Total flux subtracted in 200 components = -0.00059166 Jy
! Clean residual min=-0.003619 max=0.003991 Jy/beam
! Clean residual mean=0.000023 rms=0.000995 Jy/beam
! Combined flux in latest and established models = 0.0857655 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 62 components and 0.0857655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087803Jy  sigma=1.231219
! Fit after  self-cal, rms=0.087844Jy  sigma=1.231185
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.33268e-05 Jy
! Component: 100  -  total flux cleaned = -5.97924e-05 Jy
! Component: 150  -  total flux cleaned = -9.4695e-05 Jy
! Component: 200  -  total flux cleaned = -0.000111275 Jy
! Total flux subtracted in 200 components = -0.000111275 Jy
! Clean residual min=-0.003627 max=0.003999 Jy/beam
! Clean residual mean=0.000023 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 0.0856542 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.0856542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087837Jy  sigma=1.231098
! Fit after  self-cal, rms=0.087842Jy  sigma=1.231091
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087842Jy  sigma=1.231091
! Fit after  self-cal, rms=0.087693Jy  sigma=1.230213
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.916 mas, bmaj=29.26 mas, bpa=8.618 degrees
! Estimated noise=0.803549 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000390887 Jy
! Component: 100  -  total flux cleaned = -0.000510403 Jy
! Component: 150  -  total flux cleaned = -0.000590953 Jy
! Component: 200  -  total flux cleaned = -0.000647961 Jy
! Total flux subtracted in 200 components = -0.000647961 Jy
! Clean residual min=-0.003515 max=0.003927 Jy/beam
! Clean residual mean=0.000023 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.0850062 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 77 components and 0.0850062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087685Jy  sigma=1.230090
! Fit after  self-cal, rms=0.087715Jy  sigma=1.229991
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.81041e-06 Jy
! Component: 100  -  total flux cleaned = -5.23395e-05 Jy
! Component: 150  -  total flux cleaned = -0.000108178 Jy
! Component: 200  -  total flux cleaned = -0.000134582 Jy
! Total flux subtracted in 200 components = -0.000134582 Jy
! Clean residual min=-0.003467 max=0.003918 Jy/beam
! Clean residual mean=0.000022 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 0.0848716 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 0.0848716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087710Jy  sigma=1.229932
! Fit after  self-cal, rms=0.087713Jy  sigma=1.229927
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087713Jy  sigma=1.229927
! Fit after  self-cal, rms=0.087435Jy  sigma=1.229889
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.42 mas, bmaj=48.73 mas, bpa=-3.89 degrees
! Estimated noise=0.912392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000839274 Jy
! Component: 100  -  total flux cleaned = -0.00108161 Jy
! Component: 150  -  total flux cleaned = -0.00113262 Jy
! Component: 200  -  total flux cleaned = -0.00119928 Jy
! Total flux subtracted in 200 components = -0.00119928 Jy
! Clean residual min=-0.002910 max=0.003770 Jy/beam
! Clean residual mean=0.000035 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.0836723 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 84 components and 0.0836723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087434Jy  sigma=1.229815
! Fit after  self-cal, rms=0.087426Jy  sigma=1.229799
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162424 Jy
! Component: 100  -  total flux cleaned = -0.000228024 Jy
! Component: 150  -  total flux cleaned = -0.000290281 Jy
! Component: 200  -  total flux cleaned = -0.000349134 Jy
! Total flux subtracted in 200 components = -0.000349134 Jy
! Clean residual min=-0.002866 max=0.003746 Jy/beam
! Clean residual mean=0.000036 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.0833232 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 84 components and 0.0833232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087423Jy  sigma=1.229755
! Fit after  self-cal, rms=0.087423Jy  sigma=1.229746
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.918 mas, bmaj=29.28 mas, bpa=8.582 degrees
! Estimated noise=0.800795 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.918 x 29.28 at 8.582 degrees (North through East)
! Clean map  min=-0.0033156  max=0.082377 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.998 mas, bmaj=27.07 mas, bpa=9.846 degrees
! Estimated noise=1.26066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0623294 Jy
! Component: 100  -  total flux cleaned = 0.0759867 Jy
! Component: 150  -  total flux cleaned = 0.0804644 Jy
! Component: 200  -  total flux cleaned = 0.083026 Jy
! Total flux subtracted in 200 components = 0.083026 Jy
! Clean residual min=-0.004738 max=0.005577 Jy/beam
! Clean residual mean=0.000021 rms=0.001346 Jy/beam
! Combined flux in latest and established models = 0.083026 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.083026 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.918 mas, bmaj=29.28 mas, bpa=8.582 degrees
! Estimated noise=0.800795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214829 Jy
! Component: 100  -  total flux cleaned = 0.0026015 Jy
! Component: 150  -  total flux cleaned = 0.00260355 Jy
! Component: 200  -  total flux cleaned = 0.00257582 Jy
! Total flux subtracted in 200 components = 0.00257582 Jy
! Clean residual min=-0.003782 max=0.003897 Jy/beam
! Clean residual mean=0.000020 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.0856018 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 65 components and 0.0856018 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.42 mas, bmaj=48.73 mas, bpa=-3.89 degrees
! Estimated noise=0.912392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000775529 Jy
! Component: 100  -  total flux cleaned = -0.000908563 Jy
! Component: 150  -  total flux cleaned = -0.00104415 Jy
! Component: 200  -  total flux cleaned = -0.00113873 Jy
! Total flux subtracted in 200 components = -0.00113873 Jy
! Clean residual min=-0.003169 max=0.003883 Jy/beam
! Clean residual mean=0.000034 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 0.0844631 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.68447e-05 Jy
! Component: 100  -  total flux cleaned = -0.000185903 Jy
! Component: 150  -  total flux cleaned = -0.000242149 Jy
! Component: 200  -  total flux cleaned = -0.000278499 Jy
! Total flux subtracted in 200 components = -0.000278499 Jy
! Clean residual min=-0.003093 max=0.003828 Jy/beam
! Clean residual mean=0.000035 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.0841846 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 78 components and 0.0841846 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.918 mas, bmaj=29.28 mas, bpa=8.582 degrees
! Estimated noise=0.800795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000499406 Jy
! Component: 100  -  total flux cleaned = 0.000605405 Jy
! Component: 150  -  total flux cleaned = 0.000605049 Jy
! Component: 200  -  total flux cleaned = 0.000605133 Jy
! Total flux subtracted in 200 components = 0.000605133 Jy
! Clean residual min=-0.003587 max=0.003824 Jy/beam
! Clean residual mean=0.000022 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.0847897 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 88 components and 0.0847897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087431Jy  sigma=1.230148
! Fit after  self-cal, rms=0.087434Jy  sigma=1.230095
wmodel /J0453-3949_S_map.mod
! wmodel: Unable to open new model file: /J0453-3949_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0453-3949_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.918 x 29.28 at 8.582 degrees (North through East)
! Clean map  min=-0.0034856  max=0.077898 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0453-3949_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0778976 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000977042 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.7628 3.7628 7.52559 15.0512 30.1024 60.2048
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.077 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  79.727 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0453-3949_S_dfm.log closed on Thu May 19 20:02:40 2016