! Started logfile: /scr/pima/bg219b_uvs/J0401+0413_X_dfm.log on Thu May 19 20:00:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0401+0413_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0401+0413_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.912346 visibilities/baseline/integration-bin.
! Found source: J0401+0413
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17736 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0401+0413_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.137992Jy  sigma=23.769659
! Fit after  self-cal, rms=0.509994Jy  sigma=10.554690
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7118 mas, bmaj=1.746 mas, bpa=-3.228 degrees
! Estimated noise=0.436645 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.381684 Jy
! Component: 100  -  total flux cleaned = 0.466223 Jy
! Total flux subtracted in 100 components = 0.466223 Jy
! Clean residual min=-0.013541 max=0.028274 Jy/beam
! Clean residual mean=-0.000006 rms=0.003104 Jy/beam
! Combined flux in latest and established models = 0.466223 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.466223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094160Jy  sigma=1.883588
! Fit after  self-cal, rms=0.094157Jy  sigma=1.883518
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0310091 Jy
! Component: 100  -  total flux cleaned = 0.0472434 Jy
! Total flux subtracted in 100 components = 0.0472434 Jy
! Clean residual min=-0.009933 max=0.010698 Jy/beam
! Clean residual mean=-0.000004 rms=0.002197 Jy/beam
! Combined flux in latest and established models = 0.513466 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.513466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083153Jy  sigma=1.629533
! Fit after  self-cal, rms=0.083151Jy  sigma=1.629387
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8555 mas, bmaj=1.983 mas, bpa=-3.24 degrees
! Estimated noise=0.278942 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00941398 Jy
! Component: 100  -  total flux cleaned = 0.0145272 Jy
! Component: 150  -  total flux cleaned = 0.0166405 Jy
! Component: 200  -  total flux cleaned = 0.0167296 Jy
! Total flux subtracted in 200 components = 0.0167296 Jy
! Clean residual min=-0.009122 max=0.012008 Jy/beam
! Clean residual mean=-0.000008 rms=0.002831 Jy/beam
! Combined flux in latest and established models = 0.530196 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 27 components and 0.530196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082173Jy  sigma=1.604091
! Fit after  self-cal, rms=0.082168Jy  sigma=1.603974
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8555 x 1.983 at -3.24 degrees (North through East)
! Clean map  min=-0.0088351  max=0.49541 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        0.96     
!   LA        0.96     MK        1.00     NL        1.02     OV        0.97     
!   PT        1.11     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.04     KP        0.98     
!   LA        0.98     MK        1.05     NL        1.02     OV        1.02     
!   PT        1.12     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.05     KP        1.02     
!   LA        1.00     MK        1.05     NL        1.05     OV        1.01     
!   PT        1.13     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.99     KP        0.97     
!   LA        0.96     MK        1.01     NL        1.00     OV        0.99     
!   PT        1.11     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.99     KP        0.97     
!   LA        0.95     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.10     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.97     MK        1.04     NL        1.02     OV        0.99     
!   PT        1.13     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.99     MK        1.06     NL        1.03     OV        1.01     
!   PT        1.14     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.98     KP        0.98     
!   LA        0.94     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.11     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.97     KP        0.96     
!   LA        0.94     MK        1.02     NL        1.02     OV        0.98     
!   PT        1.09     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        0.96     KP        0.95     
!   LA        0.93     MK        1.00     NL        0.98     OV        0.96     
!   PT        1.05     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.96     KP        0.92     
!   LA        0.91     MK        1.00     NL        0.98     OV        0.96     
!   PT        1.08     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        0.92     KP        0.94     
!   LA        0.93     MK        0.97     NL        0.95     OV        0.91     
!   PT        1.03     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.082168Jy  sigma=1.603974
! Fit after  self-cal, rms=0.073598Jy  sigma=1.419632
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8592 mas, bmaj=1.988 mas, bpa=-3.207 degrees
! Estimated noise=0.278736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00208531 Jy
! Component: 100  -  total flux cleaned = -0.00252663 Jy
! Component: 150  -  total flux cleaned = -0.00263851 Jy
! Component: 200  -  total flux cleaned = -0.00270571 Jy
! Total flux subtracted in 200 components = -0.00270571 Jy
! Clean residual min=-0.007698 max=0.008306 Jy/beam
! Clean residual mean=-0.000001 rms=0.002206 Jy/beam
! Combined flux in latest and established models = 0.52749 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.52749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073500Jy  sigma=1.418761
! Fit after  self-cal, rms=0.073515Jy  sigma=1.418648
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073515Jy  sigma=1.418648
! Fit after  self-cal, rms=0.066032Jy  sigma=1.288866
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8609 mas, bmaj=1.989 mas, bpa=-3.096 degrees
! Estimated noise=0.277414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00233129 Jy
! Component: 100  -  total flux cleaned = -0.0034285 Jy
! Component: 150  -  total flux cleaned = -0.00406965 Jy
! Component: 200  -  total flux cleaned = -0.00441944 Jy
! Total flux subtracted in 200 components = -0.00441944 Jy
! Clean residual min=-0.002416 max=0.002945 Jy/beam
! Clean residual mean=-0.000002 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.52307 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 46 components and 0.52307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065928Jy  sigma=1.287717
! Fit after  self-cal, rms=0.065938Jy  sigma=1.287609
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, 21.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00283275 Jy
! Component: 100  -  total flux cleaned = 0.00410366 Jy
! Component: 150  -  total flux cleaned = 0.00475973 Jy
! Component: 200  -  total flux cleaned = 0.00517583 Jy
! Total flux subtracted in 200 components = 0.00517583 Jy
! Clean residual min=-0.002465 max=0.002605 Jy/beam
! Clean residual mean=-0.000002 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.528246 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 68 components and 0.528246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065776Jy  sigma=1.285053
! Fit after  self-cal, rms=0.065771Jy  sigma=1.284806
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065771Jy  sigma=1.284806
! Fit after  self-cal, rms=0.064053Jy  sigma=1.256369
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.861 mas, bmaj=1.989 mas, bpa=-3.104 degrees
! Estimated noise=0.277442 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00093026 Jy
! Component: 100  -  total flux cleaned = -0.00122528 Jy
! Component: 150  -  total flux cleaned = -0.00134238 Jy
! Component: 200  -  total flux cleaned = -0.00142391 Jy
! Total flux subtracted in 200 components = -0.00142391 Jy
! Clean residual min=-0.001760 max=0.001865 Jy/beam
! Clean residual mean=-0.000000 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.526822 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 81 components and 0.526822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064028Jy  sigma=1.255817
! Fit after  self-cal, rms=0.064033Jy  sigma=1.255771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.6, 40.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167757 Jy
! Component: 100  -  total flux cleaned = 0.00214354 Jy
! Component: 150  -  total flux cleaned = 0.00223806 Jy
! Component: 200  -  total flux cleaned = 0.00221799 Jy
! Total flux subtracted in 200 components = 0.00221799 Jy
! Clean residual min=-0.001595 max=0.001683 Jy/beam
! Clean residual mean=0.000000 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.52904 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 95 components and 0.52904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063983Jy  sigma=1.254915
! Fit after  self-cal, rms=0.063978Jy  sigma=1.254825
! Inverting map 
! Added new window around map position (0.4, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001583 Jy
! Component: 100  -  total flux cleaned = 0.00216963 Jy
! Component: 150  -  total flux cleaned = 0.00232706 Jy
! Component: 200  -  total flux cleaned = 0.00244922 Jy
! Total flux subtracted in 200 components = 0.00244922 Jy
! Clean residual min=-0.001569 max=0.001456 Jy/beam
! Clean residual mean=0.000000 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.531489 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 114 components and 0.531489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063938Jy  sigma=1.253968
! Fit after  self-cal, rms=0.063935Jy  sigma=1.253907
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063935Jy  sigma=1.253907
! Fit after  self-cal, rms=0.063994Jy  sigma=1.253278
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.047 mas, bmaj=3.178 mas, bpa=-4.247 degrees
! Estimated noise=0.362187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000773971 Jy
! Component: 100  -  total flux cleaned = 0.00101707 Jy
! Component: 150  -  total flux cleaned = 0.00123909 Jy
! Component: 200  -  total flux cleaned = 0.00142057 Jy
! Total flux subtracted in 200 components = 0.00142057 Jy
! Clean residual min=-0.001932 max=0.001607 Jy/beam
! Clean residual mean=0.000000 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.53291 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 127 components and 0.53291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063982Jy  sigma=1.253052
! Fit after  self-cal, rms=0.063980Jy  sigma=1.253006
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000250208 Jy
! Component: 100  -  total flux cleaned = 0.000388067 Jy
! Component: 150  -  total flux cleaned = 0.000431569 Jy
! Component: 200  -  total flux cleaned = 0.000498084 Jy
! Total flux subtracted in 200 components = 0.000498084 Jy
! Clean residual min=-0.001913 max=0.001562 Jy/beam
! Clean residual mean=0.000000 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.533408 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 141 components and 0.533408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063976Jy  sigma=1.252945
! Fit after  self-cal, rms=0.063975Jy  sigma=1.252921
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8611 mas, bmaj=1.989 mas, bpa=-3.118 degrees
! Estimated noise=0.277653 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8611 x 1.989 at -3.118 degrees (North through East)
! Clean map  min=-0.0014641  max=0.49321 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7162 mas, bmaj=1.749 mas, bpa=-3.073 degrees
! Estimated noise=0.434145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.379474 Jy
! Component: 100  -  total flux cleaned = 0.462789 Jy
! Component: 150  -  total flux cleaned = 0.491231 Jy
! Component: 200  -  total flux cleaned = 0.505948 Jy
! Total flux subtracted in 200 components = 0.505948 Jy
! Clean residual min=-0.004335 max=0.007135 Jy/beam
! Clean residual mean=-0.000001 rms=0.000966 Jy/beam
! Combined flux in latest and established models = 0.505948 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.505948 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8611 mas, bmaj=1.989 mas, bpa=-3.118 degrees
! Estimated noise=0.277653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00961649 Jy
! Component: 100  -  total flux cleaned = 0.0147078 Jy
! Component: 150  -  total flux cleaned = 0.0179029 Jy
! Component: 200  -  total flux cleaned = 0.019878 Jy
! Total flux subtracted in 200 components = 0.019878 Jy
! Clean residual min=-0.001951 max=0.001722 Jy/beam
! Clean residual mean=-0.000000 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.525826 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 34 components and 0.525826 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.047 mas, bmaj=3.178 mas, bpa=-4.247 degrees
! Estimated noise=0.362187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206526 Jy
! Component: 100  -  total flux cleaned = 0.00360605 Jy
! Component: 150  -  total flux cleaned = 0.00481235 Jy
! Component: 200  -  total flux cleaned = 0.00579351 Jy
! Total flux subtracted in 200 components = 0.00579351 Jy
! Clean residual min=-0.001930 max=0.001706 Jy/beam
! Clean residual mean=0.000000 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.531619 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00080878 Jy
! Component: 100  -  total flux cleaned = 0.00147876 Jy
! Component: 150  -  total flux cleaned = 0.00187097 Jy
! Component: 200  -  total flux cleaned = 0.00215955 Jy
! Total flux subtracted in 200 components = 0.00215955 Jy
! Clean residual min=-0.001884 max=0.001644 Jy/beam
! Clean residual mean=0.000000 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.533779 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 69 components and 0.533779 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8611 mas, bmaj=1.989 mas, bpa=-3.118 degrees
! Estimated noise=0.277653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00038843 Jy
! Component: 100  -  total flux cleaned = 6.41964e-05 Jy
! Component: 150  -  total flux cleaned = 0.000376895 Jy
! Component: 200  -  total flux cleaned = 0.00054174 Jy
! Total flux subtracted in 200 components = 0.00054174 Jy
! Clean residual min=-0.001546 max=0.001666 Jy/beam
! Clean residual mean=0.000000 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.534321 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 0.534321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064093Jy  sigma=1.255086
! Fit after  self-cal, rms=0.064082Jy  sigma=1.254904
wmodel /J0401+0413_X_map.mod
! wmodel: Unable to open new model file: /J0401+0413_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0401+0413_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8611 x 1.989 at -3.118 degrees (North through East)
! Clean map  min=-0.0013267  max=0.49323 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0401+0413_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.493234 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000364289 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.221571 0.221571 0.443143 0.886285 1.77257 3.54514 7.09028 14.1806 28.3611 56.7223
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.493 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1353.96 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0401+0413_X_dfm.log closed on Thu May 19 20:00:46 2016