! Started logfile: /scr/pima/bg219b_uvs/J0342+4809_X_dfm.log on Thu May 19 20:00:04 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0342+4809_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0342+4809_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.900236 visibilities/baseline/integration-bin.
! Found source: J0342+4809
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22848 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0342+4809_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006047Jy  sigma=25.307925
! Fit after  self-cal, rms=0.921695Jy  sigma=23.181315
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7683 mas, bmaj=1.065 mas, bpa=2.822 degrees
! Estimated noise=0.448728 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0586414 Jy
! Component: 100  -  total flux cleaned = 0.0735517 Jy
! Total flux subtracted in 100 components = 0.0735517 Jy
! Clean residual min=-0.003838 max=0.006699 Jy/beam
! Clean residual mean=0.000008 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.0735518 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0735518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063061Jy  sigma=1.488256
! Fit after  self-cal, rms=0.062545Jy  sigma=1.475342
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00753837 Jy
! Component: 100  -  total flux cleaned = 0.0113641 Jy
! Total flux subtracted in 100 components = 0.0113641 Jy
! Clean residual min=-0.003185 max=0.004613 Jy/beam
! Clean residual mean=0.000005 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.0849159 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.0849159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061326Jy  sigma=1.441176
! Fit after  self-cal, rms=0.061317Jy  sigma=1.440648
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=1.346 mas, bpa=0.04472 degrees
! Estimated noise=0.192826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00567297 Jy
! Component: 100  -  total flux cleaned = 0.00926099 Jy
! Component: 150  -  total flux cleaned = 0.0117425 Jy
! Component: 200  -  total flux cleaned = 0.0135919 Jy
! Total flux subtracted in 200 components = 0.0135919 Jy
! Clean residual min=-0.001864 max=0.002736 Jy/beam
! Clean residual mean=0.000009 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.0985078 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 39 components and 0.0985078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060731Jy  sigma=1.424051
! Fit after  self-cal, rms=0.060702Jy  sigma=1.423130
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.009 x 1.346 at 0.04472 degrees (North through East)
! Clean map  min=-0.0017978  max=0.078178 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        1.05     KP        0.91     
!   LA        0.96     MK        1.00     NL        1.00     OV        0.97     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.03     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.03     OV        1.05     
!   PT        1.08     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.97     HN        1.05     KP        1.03     
!   LA        0.93     MK        1.04     NL        1.03     OV        1.01     
!   PT        1.15     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        0.99     KP        0.97     
!   LA        0.94     MK        1.01     NL        0.97     OV        0.99     
!   PT        1.05     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.04     KP        0.93     
!   LA        0.96     MK        1.02     NL        0.97     OV        1.02     
!   PT        1.06     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.06     KP        0.96     
!   LA        0.91     MK        1.03     NL        1.04     OV        0.98     
!   PT        1.15     SC        1.09     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        1.00     KP        1.00     
!   LA        0.94     MK        1.09     NL        1.02     OV        1.01     
!   PT        1.15     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.02     KP        0.98     
!   LA        0.92     MK        1.05     NL        0.98     OV        0.98     
!   PT        1.09     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.92     KP        0.97     
!   LA        0.91     MK        1.06     NL        1.00     OV        0.93     
!   PT        1.12     SC        1.07     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        0.91     KP        0.96     
!   LA        0.92     MK        1.03     NL        1.01     OV        0.93     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.85     HN        1.02     KP        0.94     
!   LA        0.91     MK        1.07     NL        0.97     OV        0.94     
!   PT        1.06     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.89     HN        0.89     KP        0.98     
!   LA        0.89     MK        0.94     NL        0.97     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.060702Jy  sigma=1.423130
! Fit after  self-cal, rms=0.059617Jy  sigma=1.412500
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.02 mas, bmaj=1.36 mas, bpa=-0.01036 degrees
! Estimated noise=0.190902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142202 Jy
! Component: 100  -  total flux cleaned = 0.00194724 Jy
! Component: 150  -  total flux cleaned = 0.00215482 Jy
! Component: 200  -  total flux cleaned = 0.00221961 Jy
! Total flux subtracted in 200 components = 0.00221961 Jy
! Clean residual min=-0.001817 max=0.001694 Jy/beam
! Clean residual mean=0.000004 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.100727 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 53 components and 0.100727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059579Jy  sigma=1.411418
! Fit after  self-cal, rms=0.059618Jy  sigma=1.411059
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059618Jy  sigma=1.411059
! Fit after  self-cal, rms=0.059742Jy  sigma=1.404843
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.02 mas, bmaj=1.353 mas, bpa=0.4814 degrees
! Estimated noise=0.190503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000947575 Jy
! Component: 100  -  total flux cleaned = 0.00121278 Jy
! Component: 150  -  total flux cleaned = 0.00133948 Jy
! Component: 200  -  total flux cleaned = 0.00141749 Jy
! Total flux subtracted in 200 components = 0.00141749 Jy
! Clean residual min=-0.001092 max=0.001535 Jy/beam
! Clean residual mean=0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.102145 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 64 components and 0.102145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059723Jy  sigma=1.404363
! Fit after  self-cal, rms=0.059746Jy  sigma=1.404160
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000911691 Jy
! Component: 100  -  total flux cleaned = 0.00103223 Jy
! Component: 150  -  total flux cleaned = 0.00115389 Jy
! Component: 200  -  total flux cleaned = 0.0012611 Jy
! Total flux subtracted in 200 components = 0.0012611 Jy
! Clean residual min=-0.001032 max=0.001267 Jy/beam
! Clean residual mean=0.000000 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.103406 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 79 components and 0.103406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059719Jy  sigma=1.403470
! Fit after  self-cal, rms=0.059717Jy  sigma=1.403405
! Inverting map 
! Added new window around map position (-15, 31.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110982 Jy
! Component: 100  -  total flux cleaned = 0.00162578 Jy
! Component: 150  -  total flux cleaned = 0.00177906 Jy
! Component: 200  -  total flux cleaned = 0.00179619 Jy
! Total flux subtracted in 200 components = 0.00179619 Jy
! Clean residual min=-0.001011 max=0.001135 Jy/beam
! Clean residual mean=0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.105202 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 97 components and 0.105202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059693Jy  sigma=1.402791
! Fit after  self-cal, rms=0.059691Jy  sigma=1.402748
! Inverting map 
! Added new window around map position (-49.4, 17.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000796008 Jy
! Component: 100  -  total flux cleaned = 0.00104393 Jy
! Component: 150  -  total flux cleaned = 0.0011959 Jy
! Component: 200  -  total flux cleaned = 0.00128104 Jy
! Total flux subtracted in 200 components = 0.00128104 Jy
! Clean residual min=-0.000976 max=0.001050 Jy/beam
! Clean residual mean=0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.106483 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 114 components and 0.106483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059672Jy  sigma=1.402209
! Fit after  self-cal, rms=0.059671Jy  sigma=1.402175
! Inverting map 
! Added new window around map position (39.6, 32.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000506185 Jy
! Component: 100  -  total flux cleaned = 0.000481056 Jy
! Component: 150  -  total flux cleaned = 0.000500377 Jy
! Component: 200  -  total flux cleaned = 0.000639486 Jy
! Total flux subtracted in 200 components = 0.000639486 Jy
! Clean residual min=-0.000939 max=0.000900 Jy/beam
! Clean residual mean=0.000000 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.107123 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 127 components and 0.107123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059648Jy  sigma=1.401695
! Fit after  self-cal, rms=0.059648Jy  sigma=1.401670
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059648Jy  sigma=1.401670
! Fit after  self-cal, rms=0.059707Jy  sigma=1.401517
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.353 mas, bpa=0.6959 degrees
! Estimated noise=0.190622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000446326 Jy
! Component: 100  -  total flux cleaned = 0.00050196 Jy
! Component: 150  -  total flux cleaned = 0.000621013 Jy
! Component: 200  -  total flux cleaned = 0.000747419 Jy
! Total flux subtracted in 200 components = 0.000747419 Jy
! Clean residual min=-0.000914 max=0.000871 Jy/beam
! Clean residual mean=-0.000000 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.10787 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 138 components and 0.10787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059696Jy  sigma=1.401247
! Fit after  self-cal, rms=0.059698Jy  sigma=1.401232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111307 Jy
! Component: 100  -  total flux cleaned = 0.000183938 Jy
! Component: 150  -  total flux cleaned = 0.000239751 Jy
! Component: 200  -  total flux cleaned = 0.000320056 Jy
! Total flux subtracted in 200 components = 0.000320056 Jy
! Clean residual min=-0.000900 max=0.000869 Jy/beam
! Clean residual mean=-0.000000 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.10819 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 142 components and 0.10819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059691Jy  sigma=1.401086
! Fit after  self-cal, rms=0.059691Jy  sigma=1.401085
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059691Jy  sigma=1.401085
! Fit after  self-cal, rms=0.059740Jy  sigma=1.401057
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.21 mas, bmaj=2.43 mas, bpa=-0.5497 degrees
! Estimated noise=0.237622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000378469 Jy
! Component: 100  -  total flux cleaned = 0.000639936 Jy
! Component: 150  -  total flux cleaned = 0.00078098 Jy
! Component: 200  -  total flux cleaned = 0.000822631 Jy
! Total flux subtracted in 200 components = 0.000822631 Jy
! Clean residual min=-0.000911 max=0.000986 Jy/beam
! Clean residual mean=-0.000001 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.109013 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 162 components and 0.109013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059736Jy  sigma=1.400962
! Fit after  self-cal, rms=0.059737Jy  sigma=1.400951
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21.2, 38).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000851327 Jy
! Component: 100  -  total flux cleaned = 0.00110444 Jy
! Component: 150  -  total flux cleaned = 0.00120153 Jy
! Component: 200  -  total flux cleaned = 0.00133042 Jy
! Total flux subtracted in 200 components = 0.00133042 Jy
! Clean residual min=-0.000816 max=0.000749 Jy/beam
! Clean residual mean=-0.000001 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.110343 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 190 components and 0.110343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059724Jy  sigma=1.400643
! Fit after  self-cal, rms=0.059723Jy  sigma=1.400614
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.352 mas, bpa=0.8063 degrees
! Estimated noise=0.19083 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.021 x 1.352 at 0.8063 degrees (North through East)
! Clean map  min=-0.00078779  max=0.0772 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7759 mas, bmaj=1.07 mas, bpa=3.387 degrees
! Estimated noise=0.445727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.058988 Jy
! Component: 100  -  total flux cleaned = 0.0742683 Jy
! Component: 150  -  total flux cleaned = 0.0821283 Jy
! Component: 200  -  total flux cleaned = 0.0873759 Jy
! Total flux subtracted in 200 components = 0.0873759 Jy
! Clean residual min=-0.002772 max=0.003694 Jy/beam
! Clean residual mean=0.000002 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.0873758 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0873758 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.352 mas, bpa=0.8063 degrees
! Estimated noise=0.19083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00521745 Jy
! Component: 100  -  total flux cleaned = 0.00838856 Jy
! Component: 150  -  total flux cleaned = 0.0106442 Jy
! Component: 200  -  total flux cleaned = 0.0123811 Jy
! Total flux subtracted in 200 components = 0.0123811 Jy
! Clean residual min=-0.001109 max=0.001420 Jy/beam
! Clean residual mean=0.000002 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.0997569 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 43 components and 0.0997569 Jy
! Inverting map 
! Added new window around map position (10, -27).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148335 Jy
! Component: 100  -  total flux cleaned = 0.00256829 Jy
! Component: 150  -  total flux cleaned = 0.00353894 Jy
! Component: 200  -  total flux cleaned = 0.00425079 Jy
! Total flux subtracted in 200 components = 0.00425079 Jy
! Clean residual min=-0.000993 max=0.001010 Jy/beam
! Clean residual mean=0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.104008 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 63 components and 0.104008 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.21 mas, bmaj=2.43 mas, bpa=-0.5497 degrees
! Estimated noise=0.237622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155191 Jy
! Component: 100  -  total flux cleaned = 0.00237831 Jy
! Component: 150  -  total flux cleaned = 0.00305695 Jy
! Component: 200  -  total flux cleaned = 0.00361948 Jy
! Total flux subtracted in 200 components = 0.00361948 Jy
! Clean residual min=-0.001085 max=0.000861 Jy/beam
! Clean residual mean=-0.000000 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.107627 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024509 Jy
! Component: 100  -  total flux cleaned = 0.000443616 Jy
! Component: 150  -  total flux cleaned = 0.000624426 Jy
! Component: 200  -  total flux cleaned = 0.000791665 Jy
! Total flux subtracted in 200 components = 0.000791665 Jy
! Clean residual min=-0.000977 max=0.000749 Jy/beam
! Clean residual mean=-0.000000 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.108419 Jy
! Adding 104 model components to the UV plane model.
! The established model now contains 148 components and 0.108419 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=1.352 mas, bpa=0.8063 degrees
! Estimated noise=0.19083 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258654 Jy
! Component: 100  -  total flux cleaned = 0.000260433 Jy
! Component: 150  -  total flux cleaned = 0.000205144 Jy
! Component: 200  -  total flux cleaned = 0.000253487 Jy
! Total flux subtracted in 200 components = 0.000253487 Jy
! Clean residual min=-0.000872 max=0.000776 Jy/beam
! Clean residual mean=-0.000000 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.108672 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 169 components and 0.108672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059736Jy  sigma=1.400946
! Fit after  self-cal, rms=0.059734Jy  sigma=1.400878
wmodel /J0342+4809_X_map.mod
! wmodel: Unable to open new model file: /J0342+4809_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0342+4809_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.021 x 1.352 at 0.8063 degrees (North through East)
! Clean map  min=-0.00083603  max=0.077022 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0342+4809_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.077022 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000198707 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.773962 0.773962 1.54792 3.09585 6.1917 12.3834 24.7668 49.5336 99.0672
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.077 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  387.615 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0342+4809_X_dfm.log closed on Thu May 19 20:00:07 2016