! Started logfile: /scr/pima/bg219b_uvs/J0317+5643_X_dfm.log on Thu May 19 19:59:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0317+5643_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0317+5643_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J0317+5643
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23328 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0317+5643_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025214Jy  sigma=23.787791
! Fit after  self-cal, rms=0.777466Jy  sigma=18.030758
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7879 mas, bmaj=0.9759 mas, bpa=-7.976 degrees
! Estimated noise=0.445331 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170859 Jy
! Component: 100  -  total flux cleaned = 0.209214 Jy
! Total flux subtracted in 100 components = 0.209214 Jy
! Clean residual min=-0.006561 max=0.013254 Jy/beam
! Clean residual mean=0.000041 rms=0.001453 Jy/beam
! Combined flux in latest and established models = 0.209214 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.209214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068854Jy  sigma=1.529827
! Fit after  self-cal, rms=0.068842Jy  sigma=1.529544
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142509 Jy
! Component: 100  -  total flux cleaned = 0.0215234 Jy
! Total flux subtracted in 100 components = 0.0215234 Jy
! Clean residual min=-0.004859 max=0.006692 Jy/beam
! Clean residual mean=0.000024 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 0.230737 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.230737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065585Jy  sigma=1.444151
! Fit after  self-cal, rms=0.065577Jy  sigma=1.443724
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=1.244 mas, bpa=-5.669 degrees
! Estimated noise=0.203798 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.6, 13.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00722673 Jy
! Component: 100  -  total flux cleaned = 0.0115262 Jy
! Component: 150  -  total flux cleaned = 0.0146364 Jy
! Component: 200  -  total flux cleaned = 0.016816 Jy
! Total flux subtracted in 200 components = 0.016816 Jy
! Clean residual min=-0.004366 max=0.006175 Jy/beam
! Clean residual mean=0.000028 rms=0.001114 Jy/beam
! Combined flux in latest and established models = 0.247553 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 46 components and 0.247553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064656Jy  sigma=1.422197
! Fit after  self-cal, rms=0.064551Jy  sigma=1.418975
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.037 x 1.244 at -5.669 degrees (North through East)
! Clean map  min=-0.0042719  max=0.22229 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.03     KP        0.95     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.02     KP        0.96     
!   LA        0.98     MK        1.03     NL        1.05     OV        0.99     
!   PT        1.09     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.02     KP        1.00     
!   LA        1.01     MK        1.02     NL        1.04     OV        1.03     
!   PT        1.12     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.02     KP        0.96     
!   LA        0.96     MK        0.99     NL        1.02     OV        0.99     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.03     KP        0.96     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.97     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.99     KP        0.97     
!   LA        0.98     MK        1.00     NL        1.04     OV        0.98     
!   PT        1.12     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.05     KP        0.99     
!   LA        1.00     MK        1.07     NL        1.05     OV        1.01     
!   PT        1.09     SC        1.09     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.99     KP        0.98     
!   LA        0.97     MK        1.03     NL        1.01     OV        0.95     
!   PT        1.07     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.02     KP        0.97     
!   LA        0.97     MK        1.06     NL        1.02     OV        0.97     
!   PT        1.07     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.98     KP        0.95     
!   LA        0.96     MK        1.03     NL        0.99     OV        0.97     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.00     KP        0.93     
!   LA        0.94     MK        1.02     NL        1.00     OV        0.98     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.95     HN        0.93     KP        0.96     
!   LA        0.96     MK        0.98     NL        0.99     OV        0.93     
!   PT        0.99     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.064551Jy  sigma=1.418975
! Fit after  self-cal, rms=0.063136Jy  sigma=1.384460
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.25 mas, bpa=-5.439 degrees
! Estimated noise=0.203855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00453353 Jy
! Component: 100  -  total flux cleaned = 0.00700537 Jy
! Component: 150  -  total flux cleaned = 0.00774262 Jy
! Component: 200  -  total flux cleaned = 0.00829013 Jy
! Total flux subtracted in 200 components = 0.00829013 Jy
! Clean residual min=-0.003123 max=0.003170 Jy/beam
! Clean residual mean=0.000030 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.255843 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 76 components and 0.255843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062757Jy  sigma=1.375313
! Fit after  self-cal, rms=0.062757Jy  sigma=1.374735
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062757Jy  sigma=1.374735
! Fit after  self-cal, rms=0.062243Jy  sigma=1.352513
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.046 mas, bmaj=1.249 mas, bpa=-4.917 degrees
! Estimated noise=0.204414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123807 Jy
! Component: 100  -  total flux cleaned = -0.00142774 Jy
! Component: 150  -  total flux cleaned = -0.00161335 Jy
! Component: 200  -  total flux cleaned = -0.00174138 Jy
! Total flux subtracted in 200 components = -0.00174138 Jy
! Clean residual min=-0.001429 max=0.001421 Jy/beam
! Clean residual mean=0.000004 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.254102 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 89 components and 0.254102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062176Jy  sigma=1.350935
! Fit after  self-cal, rms=0.062181Jy  sigma=1.350715
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000194657 Jy
! Component: 100  -  total flux cleaned = -0.000195226 Jy
! Component: 150  -  total flux cleaned = -0.000246833 Jy
! Component: 200  -  total flux cleaned = -0.000247113 Jy
! Total flux subtracted in 200 components = -0.000247113 Jy
! Clean residual min=-0.001384 max=0.001482 Jy/beam
! Clean residual mean=0.000004 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.253855 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 92 components and 0.253855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062158Jy  sigma=1.350183
! Fit after  self-cal, rms=0.062154Jy  sigma=1.350145
! Inverting map 
! Added new window around map position (-6, 16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146605 Jy
! Component: 100  -  total flux cleaned = 0.00197689 Jy
! Component: 150  -  total flux cleaned = 0.00216686 Jy
! Component: 200  -  total flux cleaned = 0.00216682 Jy
! Total flux subtracted in 200 components = 0.00216682 Jy
! Clean residual min=-0.001258 max=0.001312 Jy/beam
! Clean residual mean=0.000002 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.256021 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 108 components and 0.256021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062112Jy  sigma=1.349235
! Fit after  self-cal, rms=0.062109Jy  sigma=1.349191
! Inverting map 
! Added new window around map position (34.6, 38).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000651851 Jy
! Component: 100  -  total flux cleaned = 0.000731991 Jy
! Component: 150  -  total flux cleaned = 0.000802543 Jy
! Component: 200  -  total flux cleaned = 0.000824603 Jy
! Total flux subtracted in 200 components = 0.000824603 Jy
! Clean residual min=-0.001248 max=0.001171 Jy/beam
! Clean residual mean=0.000002 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.256846 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 122 components and 0.256846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062078Jy  sigma=1.348617
! Fit after  self-cal, rms=0.062077Jy  sigma=1.348578
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062077Jy  sigma=1.348578
! Fit after  self-cal, rms=0.062087Jy  sigma=1.348313
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.25 mas, bpa=-5.224 degrees
! Estimated noise=0.20424 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000572369 Jy
! Component: 100  -  total flux cleaned = -0.000753722 Jy
! Component: 150  -  total flux cleaned = -0.000837872 Jy
! Component: 200  -  total flux cleaned = -0.000897257 Jy
! Total flux subtracted in 200 components = -0.000897257 Jy
! Clean residual min=-0.001175 max=0.001097 Jy/beam
! Clean residual mean=0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.255949 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 126 components and 0.255949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062067Jy  sigma=1.347921
! Fit after  self-cal, rms=0.062068Jy  sigma=1.347883
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000182588 Jy
! Component: 100  -  total flux cleaned = -0.000201518 Jy
! Component: 150  -  total flux cleaned = -0.000183145 Jy
! Component: 200  -  total flux cleaned = -0.000183188 Jy
! Total flux subtracted in 200 components = -0.000183188 Jy
! Clean residual min=-0.001172 max=0.001081 Jy/beam
! Clean residual mean=0.000001 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.255765 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 130 components and 0.255765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062056Jy  sigma=1.347657
! Fit after  self-cal, rms=0.062055Jy  sigma=1.347646
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062055Jy  sigma=1.347646
! Fit after  self-cal, rms=0.062035Jy  sigma=1.347570
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.236 mas, bmaj=2.412 mas, bpa=47.89 degrees
! Estimated noise=0.256904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000647804 Jy
! Component: 100  -  total flux cleaned = -0.000854087 Jy
! Component: 150  -  total flux cleaned = -0.0010188 Jy
! Component: 200  -  total flux cleaned = -0.00116565 Jy
! Total flux subtracted in 200 components = -0.00116565 Jy
! Clean residual min=-0.001059 max=0.001231 Jy/beam
! Clean residual mean=0.000003 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.2546 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 144 components and 0.2546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062030Jy  sigma=1.347389
! Fit after  self-cal, rms=0.062029Jy  sigma=1.347362
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020598 Jy
! Component: 100  -  total flux cleaned = -0.000303454 Jy
! Component: 150  -  total flux cleaned = -0.000402233 Jy
! Component: 200  -  total flux cleaned = -0.000503685 Jy
! Total flux subtracted in 200 components = -0.000503685 Jy
! Clean residual min=-0.001035 max=0.001174 Jy/beam
! Clean residual mean=0.000005 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.254096 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 150 components and 0.254096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062028Jy  sigma=1.347340
! Fit after  self-cal, rms=0.062027Jy  sigma=1.347330
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.251 mas, bpa=-5.391 degrees
! Estimated noise=0.204074 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.045 x 1.251 at -5.391 degrees (North through East)
! Clean map  min=-0.0010505  max=0.22297 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7929 mas, bmaj=0.9826 mas, bpa=-8.21 degrees
! Estimated noise=0.446061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.171065 Jy
! Component: 100  -  total flux cleaned = 0.209271 Jy
! Component: 150  -  total flux cleaned = 0.222241 Jy
! Component: 200  -  total flux cleaned = 0.228751 Jy
! Total flux subtracted in 200 components = 0.228751 Jy
! Clean residual min=-0.003849 max=0.003834 Jy/beam
! Clean residual mean=0.000018 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.228751 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.228751 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.251 mas, bpa=-5.391 degrees
! Estimated noise=0.204074 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00562516 Jy
! Component: 100  -  total flux cleaned = 0.00928874 Jy
! Component: 150  -  total flux cleaned = 0.0120688 Jy
! Component: 200  -  total flux cleaned = 0.0142844 Jy
! Total flux subtracted in 200 components = 0.0142844 Jy
! Clean residual min=-0.001472 max=0.001776 Jy/beam
! Clean residual mean=0.000016 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.243036 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 44 components and 0.243036 Jy
! Inverting map 
! Added new window around map position (-3.4, -26).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191795 Jy
! Component: 100  -  total flux cleaned = 0.00348071 Jy
! Component: 150  -  total flux cleaned = 0.0045762 Jy
! Component: 200  -  total flux cleaned = 0.00559369 Jy
! Total flux subtracted in 200 components = 0.00559369 Jy
! Clean residual min=-0.001405 max=0.001244 Jy/beam
! Clean residual mean=0.000009 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.248629 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 61 components and 0.248629 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.236 mas, bmaj=2.412 mas, bpa=47.89 degrees
! Estimated noise=0.256904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156335 Jy
! Component: 100  -  total flux cleaned = 0.00263643 Jy
! Component: 150  -  total flux cleaned = 0.00343865 Jy
! Component: 200  -  total flux cleaned = 0.00408104 Jy
! Total flux subtracted in 200 components = 0.00408104 Jy
! Clean residual min=-0.001144 max=0.001095 Jy/beam
! Clean residual mean=0.000008 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.25271 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467401 Jy
! Component: 100  -  total flux cleaned = 0.00063483 Jy
! Component: 150  -  total flux cleaned = 0.000720988 Jy
! Component: 200  -  total flux cleaned = 0.000802108 Jy
! Total flux subtracted in 200 components = 0.000802108 Jy
! Clean residual min=-0.001066 max=0.001064 Jy/beam
! Clean residual mean=0.000006 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.253513 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 111 components and 0.253513 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.251 mas, bpa=-5.391 degrees
! Estimated noise=0.204074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.41518e-05 Jy
! Component: 100  -  total flux cleaned = 0.000181842 Jy
! Component: 150  -  total flux cleaned = 0.000381374 Jy
! Component: 200  -  total flux cleaned = 0.000432605 Jy
! Total flux subtracted in 200 components = 0.000432605 Jy
! Clean residual min=-0.001235 max=0.001149 Jy/beam
! Clean residual mean=0.000002 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.253945 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 124 components and 0.253945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062054Jy  sigma=1.347862
! Fit after  self-cal, rms=0.062044Jy  sigma=1.347756
wmodel /J0317+5643_X_map.mod
! wmodel: Unable to open new model file: /J0317+5643_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0317+5643_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.045 x 1.251 at -5.391 degrees (North through East)
! Clean map  min=-0.0010181  max=0.22338 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0317+5643_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.223377 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000258772 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.347537 0.347537 0.695074 1.39015 2.78029 5.56059 11.1212 22.2424 44.4847 88.9694
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.223 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  863.217 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0317+5643_X_dfm.log closed on Thu May 19 19:59:52 2016