! Started logfile: /scr/pima/bg219b_uvs/J0302+5331_X_dfm.log on Thu May 19 19:59:23 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0302+5331_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0302+5331_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.926923 visibilities/baseline/integration-bin.
! Found source: J0302+5331
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26028 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0302+5331_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019614Jy  sigma=24.010869
! Fit after  self-cal, rms=0.806328Jy  sigma=18.924143
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.773 mas, bmaj=0.9811 mas, bpa=-6.814 degrees
! Estimated noise=0.423072 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.14304 Jy
! Component: 100  -  total flux cleaned = 0.186866 Jy
! Total flux subtracted in 100 components = 0.186866 Jy
! Clean residual min=-0.007691 max=0.017631 Jy/beam
! Clean residual mean=0.000063 rms=0.001798 Jy/beam
! Combined flux in latest and established models = 0.186866 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.186866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074677Jy  sigma=1.700005
! Fit after  self-cal, rms=0.074511Jy  sigma=1.696088
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193016 Jy
! Component: 100  -  total flux cleaned = 0.0298237 Jy
! Total flux subtracted in 100 components = 0.0298237 Jy
! Clean residual min=-0.006281 max=0.010868 Jy/beam
! Clean residual mean=0.000035 rms=0.001252 Jy/beam
! Combined flux in latest and established models = 0.216689 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 20 components and 0.216689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067321Jy  sigma=1.509476
! Fit after  self-cal, rms=0.067250Jy  sigma=1.507624
! Inverting map 
! Added new window around map position (1.2, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010381 Jy
! Component: 100  -  total flux cleaned = 0.0160958 Jy
! Total flux subtracted in 100 components = 0.0160958 Jy
! Clean residual min=-0.005196 max=0.005212 Jy/beam
! Clean residual mean=0.000020 rms=0.001051 Jy/beam
! Combined flux in latest and established models = 0.232785 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 27 components and 0.232785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065371Jy  sigma=1.460274
! Fit after  self-cal, rms=0.065211Jy  sigma=1.456224
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=1.266 mas, bpa=-2.104 degrees
! Estimated noise=0.198683 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00567536 Jy
! Component: 100  -  total flux cleaned = 0.00853721 Jy
! Component: 150  -  total flux cleaned = 0.0103352 Jy
! Component: 200  -  total flux cleaned = 0.0113746 Jy
! Total flux subtracted in 200 components = 0.0113746 Jy
! Clean residual min=-0.003444 max=0.005328 Jy/beam
! Clean residual mean=0.000033 rms=0.001087 Jy/beam
! Combined flux in latest and established models = 0.24416 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.24416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064735Jy  sigma=1.444422
! Fit after  self-cal, rms=0.064686Jy  sigma=1.443119
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.034 x 1.266 at -2.104 degrees (North through East)
! Clean map  min=-0.0032324  max=0.18696 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.02     KP        0.94     
!   LA        0.97     MK        0.98     NL        1.01     OV        0.97     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.02     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.02     OV        1.00     
!   PT        1.11     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.08     KP        1.01     
!   LA        1.00     MK        1.03     NL        1.03     OV        1.00     
!   PT        1.12     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.97     
!   LA        0.98     MK        0.99     NL        1.00     OV        0.98     
!   PT        1.06     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.04     KP        0.95     
!   LA        0.95     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.08     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        0.94     
!   LA        1.00     MK        1.04     NL        1.03     OV        0.99     
!   PT        1.10     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.05     KP        1.01     
!   LA        1.00     MK        1.06     NL        1.03     OV        1.00     
!   PT        1.10     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.98     KP        0.97     
!   LA        0.98     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.10     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.97     
!   LA        0.97     MK        1.03     NL        1.03     OV        0.99     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        0.98     KP        0.95     
!   LA        0.93     MK        1.00     NL        0.96     OV        0.97     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.98     KP        0.92     
!   LA        0.93     MK        0.99     NL        0.99     OV        0.98     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.93     HN        0.91     KP        0.94     
!   LA        0.94     MK        1.00     NL        0.95     OV        0.92     
!   PT        1.02     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.064686Jy  sigma=1.443119
! Fit after  self-cal, rms=0.063260Jy  sigma=1.410285
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=1.273 mas, bpa=-2.324 degrees
! Estimated noise=0.198807 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000242216 Jy
! Component: 100  -  total flux cleaned = -0.000646018 Jy
! Component: 150  -  total flux cleaned = -0.000778955 Jy
! Component: 200  -  total flux cleaned = -0.000893041 Jy
! Total flux subtracted in 200 components = -0.000893041 Jy
! Clean residual min=-0.003150 max=0.003794 Jy/beam
! Clean residual mean=0.000052 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.243267 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.243267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063194Jy  sigma=1.409003
! Fit after  self-cal, rms=0.063202Jy  sigma=1.408655
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063202Jy  sigma=1.408655
! Fit after  self-cal, rms=0.062144Jy  sigma=1.380443
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=1.273 mas, bpa=-3.251 degrees
! Estimated noise=0.198051 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128132 Jy
! Component: 100  -  total flux cleaned = -0.00159152 Jy
! Component: 150  -  total flux cleaned = -0.0017823 Jy
! Component: 200  -  total flux cleaned = -0.0019372 Jy
! Total flux subtracted in 200 components = -0.0019372 Jy
! Clean residual min=-0.001490 max=0.001507 Jy/beam
! Clean residual mean=0.000004 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.24133 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 48 components and 0.24133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062103Jy  sigma=1.379558
! Fit after  self-cal, rms=0.062115Jy  sigma=1.379259
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.09094e-05 Jy
! Component: 100  -  total flux cleaned = -0.000112597 Jy
! Component: 150  -  total flux cleaned = -0.000208138 Jy
! Component: 200  -  total flux cleaned = -0.000240785 Jy
! Total flux subtracted in 200 components = -0.000240785 Jy
! Clean residual min=-0.001439 max=0.001479 Jy/beam
! Clean residual mean=0.000005 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.241089 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.241089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062097Jy  sigma=1.378831
! Fit after  self-cal, rms=0.062092Jy  sigma=1.378701
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062092Jy  sigma=1.378701
! Fit after  self-cal, rms=0.062008Jy  sigma=1.376859
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.038 mas, bmaj=1.275 mas, bpa=-3.298 degrees
! Estimated noise=0.19768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000644109 Jy
! Component: 100  -  total flux cleaned = -0.000802004 Jy
! Component: 150  -  total flux cleaned = -0.000894999 Jy
! Component: 200  -  total flux cleaned = -0.000943597 Jy
! Total flux subtracted in 200 components = -0.000943597 Jy
! Clean residual min=-0.001415 max=0.001436 Jy/beam
! Clean residual mean=0.000003 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.240145 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.240145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061990Jy  sigma=1.376476
! Fit after  self-cal, rms=0.061990Jy  sigma=1.376377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.3132e-05 Jy
! Component: 100  -  total flux cleaned = -2.47709e-05 Jy
! Component: 150  -  total flux cleaned = -6.86764e-05 Jy
! Component: 200  -  total flux cleaned = -8.17364e-05 Jy
! Total flux subtracted in 200 components = -8.17364e-05 Jy
! Clean residual min=-0.001395 max=0.001409 Jy/beam
! Clean residual mean=0.000003 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.240063 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.240063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061980Jy  sigma=1.376135
! Fit after  self-cal, rms=0.061977Jy  sigma=1.376063
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061977Jy  sigma=1.376063
! Fit after  self-cal, rms=0.061871Jy  sigma=1.373970
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.206 mas, bmaj=2.392 mas, bpa=32.32 degrees
! Estimated noise=0.249275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000631833 Jy
! Component: 100  -  total flux cleaned = -0.000572027 Jy
! Component: 150  -  total flux cleaned = -0.000541238 Jy
! Component: 200  -  total flux cleaned = -0.000525603 Jy
! Total flux subtracted in 200 components = -0.000525603 Jy
! Clean residual min=-0.001510 max=0.001642 Jy/beam
! Clean residual mean=0.000007 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.239538 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.239538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061866Jy  sigma=1.373868
! Fit after  self-cal, rms=0.061864Jy  sigma=1.373756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.42016e-05 Jy
! Component: 100  -  total flux cleaned = -2.48423e-05 Jy
! Component: 150  -  total flux cleaned = -6.8507e-06 Jy
! Component: 200  -  total flux cleaned = 1.45158e-05 Jy
! Total flux subtracted in 200 components = 1.45158e-05 Jy
! Clean residual min=-0.001519 max=0.001623 Jy/beam
! Clean residual mean=0.000007 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.239552 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 57 components and 0.239552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061861Jy  sigma=1.373671
! Fit after  self-cal, rms=0.061858Jy  sigma=1.373595
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=1.275 mas, bpa=-3.29 degrees
! Estimated noise=0.197484 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.039 x 1.275 at -3.29 degrees (North through East)
! Clean map  min=-0.0012094  max=0.18567 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7743 mas, bmaj=0.9909 mas, bpa=-8.236 degrees
! Estimated noise=0.419605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141984 Jy
! Component: 100  -  total flux cleaned = 0.188098 Jy
! Component: 150  -  total flux cleaned = 0.2083 Jy
! Component: 200  -  total flux cleaned = 0.219316 Jy
! Total flux subtracted in 200 components = 0.219316 Jy
! Clean residual min=-0.003766 max=0.005674 Jy/beam
! Clean residual mean=0.000020 rms=0.000824 Jy/beam
! Combined flux in latest and established models = 0.219316 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.219316 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=1.275 mas, bpa=-3.29 degrees
! Estimated noise=0.197484 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00950572 Jy
! Component: 100  -  total flux cleaned = 0.0142105 Jy
! Component: 150  -  total flux cleaned = 0.0168653 Jy
! Component: 200  -  total flux cleaned = 0.0184729 Jy
! Total flux subtracted in 200 components = 0.0184729 Jy
! Clean residual min=-0.001314 max=0.001329 Jy/beam
! Clean residual mean=0.000007 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.237789 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 37 components and 0.237789 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.206 mas, bmaj=2.392 mas, bpa=32.32 degrees
! Estimated noise=0.249275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000991451 Jy
! Component: 100  -  total flux cleaned = 0.00142714 Jy
! Component: 150  -  total flux cleaned = 0.00157815 Jy
! Component: 200  -  total flux cleaned = 0.0016108 Jy
! Total flux subtracted in 200 components = 0.0016108 Jy
! Clean residual min=-0.001505 max=0.001601 Jy/beam
! Clean residual mean=0.000008 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.239399 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.13987e-05 Jy
! Component: 100  -  total flux cleaned = 1.65083e-05 Jy
! Component: 150  -  total flux cleaned = 2.10998e-05 Jy
! Component: 200  -  total flux cleaned = 2.56158e-05 Jy
! Total flux subtracted in 200 components = 2.56158e-05 Jy
! Clean residual min=-0.001504 max=0.001601 Jy/beam
! Clean residual mean=0.000008 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.239425 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 47 components and 0.239425 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=1.275 mas, bpa=-3.29 degrees
! Estimated noise=0.197484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132191 Jy
! Component: 100  -  total flux cleaned = -0.000131833 Jy
! Component: 150  -  total flux cleaned = -0.000155379 Jy
! Component: 200  -  total flux cleaned = -0.000156151 Jy
! Total flux subtracted in 200 components = -0.000156151 Jy
! Clean residual min=-0.001231 max=0.001324 Jy/beam
! Clean residual mean=0.000003 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.239269 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 0.239269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061884Jy  sigma=1.373959
! Fit after  self-cal, rms=0.061870Jy  sigma=1.373696
wmodel /J0302+5331_X_map.mod
! wmodel: Unable to open new model file: /J0302+5331_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0302+5331_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.039 x 1.275 at -3.29 degrees (North through East)
! Clean map  min=-0.0011742  max=0.18486 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0302+5331_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.18486 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000306358 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.497172 0.497172 0.994345 1.98869 3.97738 7.95476 15.9095 31.819 63.6381
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.184 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  603.412 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0302+5331_X_dfm.log closed on Thu May 19 19:59:26 2016