! Started logfile: /scr/pima/bg219b_uvs/J0258-2529_X_dfm.log on Thu May 19 19:59:15 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0258-2529_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0258-2529_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.889815 visibilities/baseline/integration-bin.
! Found source: J0258-2529
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23064 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0258-2529_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036666Jy  sigma=20.931741
! Fit after  self-cal, rms=0.713431Jy  sigma=14.249314
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6234 mas, bmaj=1.678 mas, bpa=-6.48 degrees
! Estimated noise=0.50509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221099 Jy
! Component: 100  -  total flux cleaned = 0.271753 Jy
! Total flux subtracted in 100 components = 0.271753 Jy
! Clean residual min=-0.009448 max=0.019452 Jy/beam
! Clean residual mean=0.000005 rms=0.002250 Jy/beam
! Combined flux in latest and established models = 0.271753 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.271753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086949Jy  sigma=1.649651
! Fit after  self-cal, rms=0.086935Jy  sigma=1.649494
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0212597 Jy
! Component: 100  -  total flux cleaned = 0.0328636 Jy
! Total flux subtracted in 100 components = 0.0328636 Jy
! Clean residual min=-0.007284 max=0.009292 Jy/beam
! Clean residual mean=0.000006 rms=0.001612 Jy/beam
! Combined flux in latest and established models = 0.304617 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 11 components and 0.304617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081136Jy  sigma=1.486633
! Fit after  self-cal, rms=0.081133Jy  sigma=1.486502
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8066 mas, bmaj=2.035 mas, bpa=-5.352 degrees
! Estimated noise=0.237994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0080768 Jy
! Component: 100  -  total flux cleaned = 0.0116185 Jy
! Component: 150  -  total flux cleaned = 0.0130193 Jy
! Component: 200  -  total flux cleaned = 0.0133209 Jy
! Total flux subtracted in 200 components = 0.0133209 Jy
! Clean residual min=-0.007007 max=0.007857 Jy/beam
! Clean residual mean=0.000011 rms=0.001756 Jy/beam
! Combined flux in latest and established models = 0.317938 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.317938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080729Jy  sigma=1.465444
! Fit after  self-cal, rms=0.080724Jy  sigma=1.465318
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8066 x 2.035 at -5.352 degrees (North through East)
! Clean map  min=-0.0065857  max=0.29258 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.19     KP        0.95     
!   LA        0.95     MK        0.98     NL        1.03     OV        0.95     
!   PT        1.09     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.19     KP        0.98     
!   LA        0.96     MK        1.03     NL        1.05     OV        1.00     
!   PT        1.12     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.19     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.06     OV        0.99     
!   PT        1.12     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.15     KP        0.96     
!   LA        0.95     MK        0.99     NL        1.03     OV        0.97     
!   PT        1.11     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.18     KP        0.96     
!   LA        0.95     MK        0.99     NL        1.02     OV        0.96     
!   PT        1.07     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.14     KP        0.98     
!   LA        0.95     MK        1.02     NL        1.06     OV        0.98     
!   PT        1.13     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.11     KP        0.98     
!   LA        0.95     MK        1.00     NL        1.02     OV        0.96     
!   PT        1.10     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.13     KP        0.96     
!   LA        0.92     MK        1.01     NL        1.04     OV        0.98     
!   PT        1.09     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        1.14     KP        0.96     
!   LA        0.92     MK        1.00     NL        1.00     OV        0.95     
!   PT        1.05     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.10     KP        0.93     
!   LA        0.93     MK        1.00     NL        1.00     OV        0.94     
!   PT        1.07     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.92     HN        1.08     KP        0.93     
!   LA        0.93     MK        0.95     NL        0.99     OV        0.91     
!   PT        1.02     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.080724Jy  sigma=1.465318
! Fit after  self-cal, rms=0.078735Jy  sigma=1.388126
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8093 mas, bmaj=2.028 mas, bpa=-5.109 degrees
! Estimated noise=0.236556 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00206282 Jy
! Component: 100  -  total flux cleaned = -0.00220274 Jy
! Component: 150  -  total flux cleaned = -0.00234492 Jy
! Component: 200  -  total flux cleaned = -0.00234314 Jy
! Total flux subtracted in 200 components = -0.00234314 Jy
! Clean residual min=-0.004613 max=0.004933 Jy/beam
! Clean residual mean=0.000018 rms=0.001265 Jy/beam
! Combined flux in latest and established models = 0.315595 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.315595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078629Jy  sigma=1.387300
! Fit after  self-cal, rms=0.078716Jy  sigma=1.387092
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078716Jy  sigma=1.387092
! Fit after  self-cal, rms=0.078193Jy  sigma=1.342194
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8097 mas, bmaj=2.032 mas, bpa=-5.064 degrees
! Estimated noise=0.236071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100909 Jy
! Component: 100  -  total flux cleaned = -0.00103448 Jy
! Component: 150  -  total flux cleaned = -0.00105484 Jy
! Component: 200  -  total flux cleaned = -0.00105686 Jy
! Total flux subtracted in 200 components = -0.00105686 Jy
! Clean residual min=-0.002431 max=0.004867 Jy/beam
! Clean residual mean=0.000004 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.314538 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 28 components and 0.314538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078174Jy  sigma=1.341879
! Fit after  self-cal, rms=0.078236Jy  sigma=1.341747
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.4, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00462063 Jy
! Component: 100  -  total flux cleaned = 0.00687118 Jy
! Component: 150  -  total flux cleaned = 0.00813185 Jy
! Component: 200  -  total flux cleaned = 0.00894294 Jy
! Total flux subtracted in 200 components = 0.00894294 Jy
! Clean residual min=-0.002221 max=0.003524 Jy/beam
! Clean residual mean=-0.000001 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.323481 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 52 components and 0.323481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077978Jy  sigma=1.335453
! Fit after  self-cal, rms=0.077958Jy  sigma=1.335016
! Inverting map 
! Added new window around map position (-1.8, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328473 Jy
! Component: 100  -  total flux cleaned = 0.00482503 Jy
! Component: 150  -  total flux cleaned = 0.00584208 Jy
! Component: 200  -  total flux cleaned = 0.00630858 Jy
! Total flux subtracted in 200 components = 0.00630858 Jy
! Clean residual min=-0.002046 max=0.002164 Jy/beam
! Clean residual mean=-0.000001 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.329789 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 79 components and 0.329789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077830Jy  sigma=1.331635
! Fit after  self-cal, rms=0.077816Jy  sigma=1.331224
! Inverting map 
! Added new window around map position (-10, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204721 Jy
! Component: 100  -  total flux cleaned = 0.00326616 Jy
! Component: 150  -  total flux cleaned = 0.00411488 Jy
! Component: 200  -  total flux cleaned = 0.00466216 Jy
! Total flux subtracted in 200 components = 0.00466216 Jy
! Clean residual min=-0.001839 max=0.001696 Jy/beam
! Clean residual mean=-0.000002 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.334452 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 100 components and 0.334452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077749Jy  sigma=1.329814
! Fit after  self-cal, rms=0.077744Jy  sigma=1.329674
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077744Jy  sigma=1.329674
! Fit after  self-cal, rms=0.077340Jy  sigma=1.328974
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8093 mas, bmaj=2.03 mas, bpa=-5.076 degrees
! Estimated noise=0.235292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000295464 Jy
! Component: 100  -  total flux cleaned = 0.00081377 Jy
! Component: 150  -  total flux cleaned = 0.00118644 Jy
! Component: 200  -  total flux cleaned = 0.00137413 Jy
! Total flux subtracted in 200 components = 0.00137413 Jy
! Clean residual min=-0.001573 max=0.001580 Jy/beam
! Clean residual mean=-0.000003 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.335826 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 108 components and 0.335826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077307Jy  sigma=1.328385
! Fit after  self-cal, rms=0.077304Jy  sigma=1.328330
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000461112 Jy
! Component: 100  -  total flux cleaned = 0.000659252 Jy
! Component: 150  -  total flux cleaned = 0.000792515 Jy
! Component: 200  -  total flux cleaned = 0.000874493 Jy
! Total flux subtracted in 200 components = 0.000874493 Jy
! Clean residual min=-0.001511 max=0.001521 Jy/beam
! Clean residual mean=-0.000003 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.3367 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 120 components and 0.3367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077290Jy  sigma=1.328053
! Fit after  self-cal, rms=0.077289Jy  sigma=1.328028
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077289Jy  sigma=1.328028
! Fit after  self-cal, rms=0.077011Jy  sigma=1.327904
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.245 mas, bmaj=5.214 mas, bpa=0.139 degrees
! Estimated noise=0.304245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.02105e-05 Jy
! Component: 100  -  total flux cleaned = 0.000507355 Jy
! Component: 150  -  total flux cleaned = 0.000801379 Jy
! Component: 200  -  total flux cleaned = 0.000908721 Jy
! Total flux subtracted in 200 components = 0.000908721 Jy
! Clean residual min=-0.002012 max=0.001732 Jy/beam
! Clean residual mean=-0.000007 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.337609 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 130 components and 0.337609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077007Jy  sigma=1.327764
! Fit after  self-cal, rms=0.077000Jy  sigma=1.327679
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00020553 Jy
! Component: 100  -  total flux cleaned = 0.00037164 Jy
! Component: 150  -  total flux cleaned = 0.000434723 Jy
! Component: 200  -  total flux cleaned = 0.000446202 Jy
! Total flux subtracted in 200 components = 0.000446202 Jy
! Clean residual min=-0.002010 max=0.001725 Jy/beam
! Clean residual mean=-0.000007 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.338055 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 136 components and 0.338055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076999Jy  sigma=1.327673
! Fit after  self-cal, rms=0.076998Jy  sigma=1.327657
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8094 mas, bmaj=2.03 mas, bpa=-5.074 degrees
! Estimated noise=0.234769 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8094 x 2.03 at -5.074 degrees (North through East)
! Clean map  min=-0.0013971  max=0.28868 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6257 mas, bmaj=1.669 mas, bpa=-6.056 degrees
! Estimated noise=0.498305 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.218069 Jy
! Component: 100  -  total flux cleaned = 0.268287 Jy
! Component: 150  -  total flux cleaned = 0.288637 Jy
! Component: 200  -  total flux cleaned = 0.299498 Jy
! Total flux subtracted in 200 components = 0.299498 Jy
! Clean residual min=-0.003972 max=0.005341 Jy/beam
! Clean residual mean=0.000000 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.299498 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.299498 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8094 mas, bmaj=2.03 mas, bpa=-5.074 degrees
! Estimated noise=0.234769 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00850105 Jy
! Component: 100  -  total flux cleaned = 0.014038 Jy
! Component: 150  -  total flux cleaned = 0.018178 Jy
! Component: 200  -  total flux cleaned = 0.0215188 Jy
! Total flux subtracted in 200 components = 0.0215188 Jy
! Clean residual min=-0.002149 max=0.002364 Jy/beam
! Clean residual mean=0.000001 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.321017 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 50 components and 0.321017 Jy
! Inverting map 
! Added new window around map position (-0.4, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00281628 Jy
! Component: 100  -  total flux cleaned = 0.00510141 Jy
! Component: 150  -  total flux cleaned = 0.00699906 Jy
! Component: 200  -  total flux cleaned = 0.00859095 Jy
! Total flux subtracted in 200 components = 0.00859095 Jy
! Clean residual min=-0.001731 max=0.001678 Jy/beam
! Clean residual mean=-0.000002 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.329608 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 77 components and 0.329608 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.245 mas, bmaj=5.214 mas, bpa=0.139 degrees
! Estimated noise=0.304245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022576 Jy
! Component: 100  -  total flux cleaned = 0.00379372 Jy
! Component: 150  -  total flux cleaned = 0.00493082 Jy
! Component: 200  -  total flux cleaned = 0.00581325 Jy
! Total flux subtracted in 200 components = 0.00581325 Jy
! Clean residual min=-0.002115 max=0.001963 Jy/beam
! Clean residual mean=-0.000006 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.335421 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000710711 Jy
! Component: 100  -  total flux cleaned = 0.0012916 Jy
! Component: 150  -  total flux cleaned = 0.00176824 Jy
! Component: 200  -  total flux cleaned = 0.00202746 Jy
! Total flux subtracted in 200 components = 0.00202746 Jy
! Clean residual min=-0.002059 max=0.001843 Jy/beam
! Clean residual mean=-0.000006 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.337448 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 134 components and 0.337448 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8094 mas, bmaj=2.03 mas, bpa=-5.074 degrees
! Estimated noise=0.234769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.91552e-05 Jy
! Component: 100  -  total flux cleaned = 9.8866e-05 Jy
! Component: 150  -  total flux cleaned = 0.000154737 Jy
! Component: 200  -  total flux cleaned = 0.000231226 Jy
! Total flux subtracted in 200 components = 0.000231226 Jy
! Clean residual min=-0.001536 max=0.001517 Jy/beam
! Clean residual mean=-0.000003 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.33768 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 154 components and 0.33768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076997Jy  sigma=1.327737
! Fit after  self-cal, rms=0.076995Jy  sigma=1.327659
wmodel /J0258-2529_X_map.mod
! wmodel: Unable to open new model file: /J0258-2529_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0258-2529_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8094 x 2.03 at -5.074 degrees (North through East)
! Clean map  min=-0.0014279  max=0.28804 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0258-2529_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.288039 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00036369 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.378792 0.378792 0.757583 1.51517 3.03033 6.06067 12.1213 24.2427 48.4853 96.9707
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.288 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  791.992 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0258-2529_X_dfm.log closed on Thu May 19 19:59:18 2016