! Started logfile: /scr/pima/bg219b_uvs/J0256-2137_X_dfm.log on Thu May 19 19:59:07 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0256-2137_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0256-2137_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.87619 visibilities/baseline/integration-bin.
! Found source: J0256-2137
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13248 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0256-2137_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019512Jy  sigma=21.644849
! Fit after  self-cal, rms=0.815958Jy  sigma=17.258706
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6386 mas, bmaj=1.708 mas, bpa=-4.92 degrees
! Estimated noise=0.550103 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.140916 Jy
! Component: 100  -  total flux cleaned = 0.17341 Jy
! Total flux subtracted in 100 components = 0.17341 Jy
! Clean residual min=-0.005741 max=0.012550 Jy/beam
! Clean residual mean=-0.000014 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 0.17341 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.17341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077941Jy  sigma=1.542847
! Fit after  self-cal, rms=0.077887Jy  sigma=1.541967
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138322 Jy
! Component: 100  -  total flux cleaned = 0.0211497 Jy
! Total flux subtracted in 100 components = 0.0211497 Jy
! Clean residual min=-0.005300 max=0.005385 Jy/beam
! Clean residual mean=-0.000004 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.19456 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.19456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074718Jy  sigma=1.459593
! Fit after  self-cal, rms=0.074668Jy  sigma=1.458829
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8123 mas, bmaj=2.021 mas, bpa=-4.845 degrees
! Estimated noise=0.325247 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00731592 Jy
! Component: 100  -  total flux cleaned = 0.0108193 Jy
! Component: 150  -  total flux cleaned = 0.0126189 Jy
! Component: 200  -  total flux cleaned = 0.0134878 Jy
! Total flux subtracted in 200 components = 0.0134878 Jy
! Clean residual min=-0.005295 max=0.005819 Jy/beam
! Clean residual mean=-0.000016 rms=0.001312 Jy/beam
! Combined flux in latest and established models = 0.208047 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 0.208047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074115Jy  sigma=1.442159
! Fit after  self-cal, rms=0.074102Jy  sigma=1.441927
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8123 x 2.021 at -4.845 degrees (North through East)
! Clean map  min=-0.0050255  max=0.18439 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.12     KP        0.97     
!   LA        0.97     MK        0.98     NL        1.02     OV        0.96     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.07     HN        1.13     KP        0.97     
!   LA        0.94     MK        1.04     NL        1.03     OV        0.99     
!   PT        1.11     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.01     HN        1.16     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.03     OV        0.97     
!   PT        1.14     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.99     HN        1.06     KP        0.97     
!   LA        0.93     MK        1.03     NL        0.98     OV        0.98     
!   PT        1.10     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.07     KP        0.95     
!   LA        0.94     MK        0.96     NL        1.00     OV        0.97     
!   PT        1.08     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.08     KP        0.96     
!   LA        0.96     MK        1.03     NL        1.03     OV        0.99     
!   PT        1.10     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        1.12     KP        1.02     
!   LA        0.96     MK        0.99     NL        1.03     OV        1.02     
!   PT        1.07     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.08     KP        0.99     
!   LA        0.89     MK        1.01     NL        1.03     OV        0.94     
!   PT        1.10     SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        1.04     KP        0.94     
!   LA        0.94     MK        1.00     NL        0.97     OV        0.98     
!   PT        1.05     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.12     KP        0.96     
!   LA        0.88     MK        1.01     NL        0.95     OV        0.94     
!   PT        1.05     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.12     KP        0.93     
!   LA        0.88     MK        0.97     NL        0.98     OV        0.95     
!   PT        1.05     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.92     HN        1.05     KP        0.94     
!   LA        0.90     MK        0.96     NL        0.94     OV        0.91     
!   PT        0.96     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.074102Jy  sigma=1.441927
! Fit after  self-cal, rms=0.073887Jy  sigma=1.400932
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8142 mas, bmaj=2.017 mas, bpa=-4.684 degrees
! Estimated noise=0.324646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000332643 Jy
! Component: 100  -  total flux cleaned = -0.000351829 Jy
! Component: 150  -  total flux cleaned = -0.000407138 Jy
! Component: 200  -  total flux cleaned = -0.000407116 Jy
! Total flux subtracted in 200 components = -0.000407116 Jy
! Clean residual min=-0.004056 max=0.004933 Jy/beam
! Clean residual mean=-0.000005 rms=0.001062 Jy/beam
! Combined flux in latest and established models = 0.20764 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 36 components and 0.20764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073873Jy  sigma=1.400558
! Fit after  self-cal, rms=0.073964Jy  sigma=1.400280
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073964Jy  sigma=1.400280
! Fit after  self-cal, rms=0.072978Jy  sigma=1.379288
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.815 mas, bmaj=2.02 mas, bpa=-4.65 degrees
! Estimated noise=0.323126 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000988557 Jy
! Component: 100  -  total flux cleaned = -0.00110808 Jy
! Component: 150  -  total flux cleaned = -0.00118596 Jy
! Component: 200  -  total flux cleaned = -0.00125206 Jy
! Total flux subtracted in 200 components = -0.00125206 Jy
! Clean residual min=-0.002816 max=0.003476 Jy/beam
! Clean residual mean=-0.000014 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.206388 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 39 components and 0.206388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072958Jy  sigma=1.378890
! Fit after  self-cal, rms=0.072974Jy  sigma=1.378719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00346484 Jy
! Component: 100  -  total flux cleaned = 0.00472585 Jy
! Component: 150  -  total flux cleaned = 0.00497638 Jy
! Component: 200  -  total flux cleaned = 0.00513389 Jy
! Total flux subtracted in 200 components = 0.00513389 Jy
! Clean residual min=-0.002573 max=0.002829 Jy/beam
! Clean residual mean=-0.000015 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.211522 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 63 components and 0.211522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072822Jy  sigma=1.374522
! Fit after  self-cal, rms=0.072803Jy  sigma=1.374141
! Inverting map 
! Added new window around map position (12.2, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262208 Jy
! Component: 100  -  total flux cleaned = 0.00408148 Jy
! Component: 150  -  total flux cleaned = 0.00518077 Jy
! Component: 200  -  total flux cleaned = 0.00596066 Jy
! Total flux subtracted in 200 components = 0.00596066 Jy
! Clean residual min=-0.002335 max=0.002631 Jy/beam
! Clean residual mean=-0.000014 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.217483 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 0.217483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072693Jy  sigma=1.371768
! Fit after  self-cal, rms=0.072684Jy  sigma=1.371558
! Inverting map 
! Added new window around map position (-2, 36.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209109 Jy
! Component: 100  -  total flux cleaned = 0.00252609 Jy
! Component: 150  -  total flux cleaned = 0.00306549 Jy
! Component: 200  -  total flux cleaned = 0.00343258 Jy
! Total flux subtracted in 200 components = 0.00343258 Jy
! Clean residual min=-0.002265 max=0.002257 Jy/beam
! Clean residual mean=-0.000013 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.220915 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 108 components and 0.220915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072592Jy  sigma=1.369709
! Fit after  self-cal, rms=0.072588Jy  sigma=1.369592
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072588Jy  sigma=1.369592
! Fit after  self-cal, rms=0.072578Jy  sigma=1.364752
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8158 mas, bmaj=2.02 mas, bpa=-4.588 degrees
! Estimated noise=0.322612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120071 Jy
! Component: 100  -  total flux cleaned = 0.00180869 Jy
! Component: 150  -  total flux cleaned = 0.00212072 Jy
! Component: 200  -  total flux cleaned = 0.00226362 Jy
! Total flux subtracted in 200 components = 0.00226362 Jy
! Clean residual min=-0.002077 max=0.001954 Jy/beam
! Clean residual mean=-0.000010 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.223179 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 125 components and 0.223179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072548Jy  sigma=1.364022
! Fit after  self-cal, rms=0.072561Jy  sigma=1.363961
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414614 Jy
! Component: 100  -  total flux cleaned = 0.000518696 Jy
! Component: 150  -  total flux cleaned = 0.000616341 Jy
! Component: 200  -  total flux cleaned = 0.000662788 Jy
! Total flux subtracted in 200 components = 0.000662788 Jy
! Clean residual min=-0.002073 max=0.001892 Jy/beam
! Clean residual mean=-0.000010 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.223842 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 133 components and 0.223842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072545Jy  sigma=1.363610
! Fit after  self-cal, rms=0.072545Jy  sigma=1.363601
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072545Jy  sigma=1.363601
! Fit after  self-cal, rms=0.072574Jy  sigma=1.363536
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.248 mas, bmaj=4.723 mas, bpa=0.735 degrees
! Estimated noise=0.415838 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00094221 Jy
! Component: 100  -  total flux cleaned = 0.000881997 Jy
! Component: 150  -  total flux cleaned = 0.000802185 Jy
! Component: 200  -  total flux cleaned = 0.000779478 Jy
! Total flux subtracted in 200 components = 0.000779478 Jy
! Clean residual min=-0.002543 max=0.002300 Jy/beam
! Clean residual mean=-0.000019 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.224621 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 152 components and 0.224621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072574Jy  sigma=1.363285
! Fit after  self-cal, rms=0.072573Jy  sigma=1.363238
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000326952 Jy
! Component: 100  -  total flux cleaned = 0.000392398 Jy
! Component: 150  -  total flux cleaned = 0.000451491 Jy
! Component: 200  -  total flux cleaned = 0.000488863 Jy
! Total flux subtracted in 200 components = 0.000488863 Jy
! Clean residual min=-0.002523 max=0.002313 Jy/beam
! Clean residual mean=-0.000020 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.22511 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 155 components and 0.22511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072575Jy  sigma=1.363206
! Fit after  self-cal, rms=0.072575Jy  sigma=1.363189
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8161 mas, bmaj=2.02 mas, bpa=-4.582 degrees
! Estimated noise=0.322639 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8161 x 2.02 at -4.582 degrees (North through East)
! Clean map  min=-0.0018945  max=0.18293 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6412 mas, bmaj=1.709 mas, bpa=-4.531 degrees
! Estimated noise=0.545454 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139598 Jy
! Component: 100  -  total flux cleaned = 0.17236 Jy
! Component: 150  -  total flux cleaned = 0.186226 Jy
! Component: 200  -  total flux cleaned = 0.193178 Jy
! Total flux subtracted in 200 components = 0.193178 Jy
! Clean residual min=-0.003647 max=0.005344 Jy/beam
! Clean residual mean=-0.000000 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.193178 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.193178 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8161 mas, bmaj=2.02 mas, bpa=-4.582 degrees
! Estimated noise=0.322639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00743556 Jy
! Component: 100  -  total flux cleaned = 0.0119787 Jy
! Component: 150  -  total flux cleaned = 0.0154603 Jy
! Component: 200  -  total flux cleaned = 0.0182451 Jy
! Total flux subtracted in 200 components = 0.0182451 Jy
! Clean residual min=-0.002268 max=0.002377 Jy/beam
! Clean residual mean=-0.000014 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.211423 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 61 components and 0.211423 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.248 mas, bmaj=4.723 mas, bpa=0.735 degrees
! Estimated noise=0.415838 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00374156 Jy
! Component: 100  -  total flux cleaned = 0.00626952 Jy
! Component: 150  -  total flux cleaned = 0.00817961 Jy
! Component: 200  -  total flux cleaned = 0.00964632 Jy
! Total flux subtracted in 200 components = 0.00964632 Jy
! Clean residual min=-0.002513 max=0.002480 Jy/beam
! Clean residual mean=-0.000022 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.221069 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116461 Jy
! Component: 100  -  total flux cleaned = 0.00211618 Jy
! Component: 150  -  total flux cleaned = 0.00289892 Jy
! Component: 200  -  total flux cleaned = 0.00354497 Jy
! Total flux subtracted in 200 components = 0.00354497 Jy
! Clean residual min=-0.002476 max=0.002417 Jy/beam
! Clean residual mean=-0.000021 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.224614 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 120 components and 0.224614 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8161 mas, bmaj=2.02 mas, bpa=-4.582 degrees
! Estimated noise=0.322639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000868436 Jy
! Component: 100  -  total flux cleaned = 0.00105832 Jy
! Component: 150  -  total flux cleaned = 0.00118409 Jy
! Component: 200  -  total flux cleaned = 0.00122472 Jy
! Total flux subtracted in 200 components = 0.00122472 Jy
! Clean residual min=-0.002018 max=0.001812 Jy/beam
! Clean residual mean=-0.000010 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.225839 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 148 components and 0.225839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072601Jy  sigma=1.364148
! Fit after  self-cal, rms=0.072583Jy  sigma=1.363695
wmodel /J0256-2137_X_map.mod
! wmodel: Unable to open new model file: /J0256-2137_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0256-2137_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8161 x 2.02 at -4.582 degrees (North through East)
! Clean map  min=-0.001808  max=0.18331 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0256-2137_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.183309 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00046581 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.762336 0.762336 1.52467 3.04935 6.09869 12.1974 24.3948 48.7895 97.579
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.183 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  393.527 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0256-2137_X_dfm.log closed on Thu May 19 19:59:10 2016