! Started logfile: /scr/pima/bg219b_uvs/J0246-2935_X_dfm.log on Thu May 19 19:58:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0246-2935_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0246-2935_X_uva.fits
! AN table 1: 67 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.616584 visibilities/baseline/integration-bin.
! Found source: J0246-2935
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22308 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0246-2935_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002639Jy  sigma=20.656057
! Fit after  self-cal, rms=0.892624Jy  sigma=18.270247
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7276 mas, bmaj=1.932 mas, bpa=-2.99 degrees
! Estimated noise=0.537947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0702397 Jy
! Component: 100  -  total flux cleaned = 0.103565 Jy
! Total flux subtracted in 100 components = 0.103565 Jy
! Clean residual min=-0.006909 max=0.017406 Jy/beam
! Clean residual mean=-0.000019 rms=0.002401 Jy/beam
! Combined flux in latest and established models = 0.103565 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.103565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091086Jy  sigma=1.748207
! Fit after  self-cal, rms=0.089917Jy  sigma=1.735290
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0212447 Jy
! Component: 100  -  total flux cleaned = 0.0343299 Jy
! Total flux subtracted in 100 components = 0.0343299 Jy
! Clean residual min=-0.005201 max=0.008795 Jy/beam
! Clean residual mean=-0.000013 rms=0.001486 Jy/beam
! Combined flux in latest and established models = 0.137895 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 47 components and 0.137895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081010Jy  sigma=1.499503
! Fit after  self-cal, rms=0.080712Jy  sigma=1.496771
! Inverting map 
! Added new window around map position (1, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00980044 Jy
! Component: 100  -  total flux cleaned = 0.0163202 Jy
! Total flux subtracted in 100 components = 0.0163202 Jy
! Clean residual min=-0.004708 max=0.006322 Jy/beam
! Clean residual mean=-0.000010 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 0.154215 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 67 components and 0.154215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078390Jy  sigma=1.432868
! Fit after  self-cal, rms=0.078309Jy  sigma=1.431493
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=2.774 mas, bpa=1.223 degrees
! Estimated noise=0.251852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124708 Jy
! Component: 100  -  total flux cleaned = 0.02033 Jy
! Component: 150  -  total flux cleaned = 0.0255438 Jy
! Component: 200  -  total flux cleaned = 0.0291119 Jy
! Total flux subtracted in 200 components = 0.0291119 Jy
! Clean residual min=-0.004120 max=0.006054 Jy/beam
! Clean residual mean=-0.000010 rms=0.001291 Jy/beam
! Combined flux in latest and established models = 0.183327 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 95 components and 0.183327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076277Jy  sigma=1.375457
! Fit after  self-cal, rms=0.076171Jy  sigma=1.370546
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.042 x 2.774 at 1.223 degrees (North through East)
! Clean map  min=-0.0038487  max=0.10069 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.15     KP        0.93     
!   LA        0.93     MK        1.01     NL        1.11     OV        0.96     
!   PT        1.04     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        1.16     KP        0.93     
!   LA        0.94     MK        1.03     NL        1.13     OV        1.01     
!   PT        1.09     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.19     KP        0.96     
!   LA        0.97     MK        1.04     NL        1.11     OV        1.01     
!   PT        1.11     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.08     KP        0.93     
!   LA        0.96     MK        1.08     NL        1.08     OV        0.97     
!   PT        1.06     SC        0.86     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.07     KP        0.95     
!   LA        0.91     MK        1.05     NL        1.12     OV        0.97     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     HN        1.13     KP        0.96     
!   LA        0.94     MK        0.91     NL        1.11     OV        1.00     
!   PT        1.12     SC        0.88     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.11     KP        0.98     
!   LA        0.95     MK        1.12     NL        1.16     OV        1.02     
!   PT        1.11     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     HN        1.08     KP        0.98     
!   LA        0.93     MK        0.87     NL        1.08     OV        0.97     
!   PT        1.05     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        0.99     KP        0.92     
!   LA        0.90     MK        0.84     NL        1.06     OV        0.94     
!   PT        1.04     SC        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.94     HN        0.91     KP        0.90     
!   LA        0.93     MK        1.05     NL        1.08     OV        0.96     
!   PT        1.07     SC        0.91     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.89     HN        0.92     KP        0.93     
!   LA        0.92     MK        0.84     NL        1.08     OV        0.90     
!   PT        0.99     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.076171Jy  sigma=1.370546
! Fit after  self-cal, rms=0.076221Jy  sigma=1.346626
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=2.75 mas, bpa=1.452 degrees
! Estimated noise=0.247897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247173 Jy
! Component: 100  -  total flux cleaned = 0.0029658 Jy
! Component: 150  -  total flux cleaned = 0.00317928 Jy
! Component: 200  -  total flux cleaned = 0.00326464 Jy
! Total flux subtracted in 200 components = 0.00326464 Jy
! Clean residual min=-0.003336 max=0.003142 Jy/beam
! Clean residual mean=-0.000008 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.186592 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 126 components and 0.186592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076095Jy  sigma=1.343766
! Fit after  self-cal, rms=0.076269Jy  sigma=1.342855
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076269Jy  sigma=1.342855
! Fit after  self-cal, rms=0.076273Jy  sigma=1.333465
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=2.759 mas, bpa=1.345 degrees
! Estimated noise=0.24679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000367847 Jy
! Component: 100  -  total flux cleaned = -0.000488307 Jy
! Component: 150  -  total flux cleaned = -0.000616636 Jy
! Component: 200  -  total flux cleaned = -0.000643988 Jy
! Total flux subtracted in 200 components = -0.000643988 Jy
! Clean residual min=-0.001942 max=0.003175 Jy/beam
! Clean residual mean=-0.000006 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.185948 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 142 components and 0.185948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076222Jy  sigma=1.332695
! Fit after  self-cal, rms=0.076270Jy  sigma=1.332421
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00263908 Jy
! Component: 100  -  total flux cleaned = 0.00311759 Jy
! Component: 150  -  total flux cleaned = 0.00338528 Jy
! Component: 200  -  total flux cleaned = 0.00348604 Jy
! Total flux subtracted in 200 components = 0.00348604 Jy
! Clean residual min=-0.001968 max=0.002049 Jy/beam
! Clean residual mean=-0.000006 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.189434 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 165 components and 0.189434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076162Jy  sigma=1.330260
! Fit after  self-cal, rms=0.076140Jy  sigma=1.329949
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076140Jy  sigma=1.329949
! Fit after  self-cal, rms=0.075585Jy  sigma=1.329679
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.763 mas, bpa=1.345 degrees
! Estimated noise=0.245248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243377 Jy
! Component: 100  -  total flux cleaned = 0.000102929 Jy
! Component: 150  -  total flux cleaned = 7.25084e-05 Jy
! Component: 200  -  total flux cleaned = 4.29036e-05 Jy
! Total flux subtracted in 200 components = 4.29036e-05 Jy
! Clean residual min=-0.001935 max=0.001980 Jy/beam
! Clean residual mean=-0.000006 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.189477 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 171 components and 0.189477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075541Jy  sigma=1.329090
! Fit after  self-cal, rms=0.075535Jy  sigma=1.329024
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139706 Jy
! Component: 100  -  total flux cleaned = 0.000111263 Jy
! Component: 150  -  total flux cleaned = 8.52729e-05 Jy
! Component: 200  -  total flux cleaned = 8.46679e-05 Jy
! Total flux subtracted in 200 components = 8.46679e-05 Jy
! Clean residual min=-0.001935 max=0.001975 Jy/beam
! Clean residual mean=-0.000006 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.189561 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 178 components and 0.189561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075510Jy  sigma=1.328704
! Fit after  self-cal, rms=0.075506Jy  sigma=1.328680
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075506Jy  sigma=1.328680
! Fit after  self-cal, rms=0.075418Jy  sigma=1.328264
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.319 mas, bmaj=5.851 mas, bpa=1.414 degrees
! Estimated noise=0.283657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000362738 Jy
! Component: 100  -  total flux cleaned = 0.000518482 Jy
! Component: 150  -  total flux cleaned = 0.000500755 Jy
! Component: 200  -  total flux cleaned = 0.000501175 Jy
! Total flux subtracted in 200 components = 0.000501175 Jy
! Clean residual min=-0.001858 max=0.002486 Jy/beam
! Clean residual mean=-0.000010 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.190062 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 191 components and 0.190062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075405Jy  sigma=1.328086
! Fit after  self-cal, rms=0.075421Jy  sigma=1.328050
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129521 Jy
! Component: 100  -  total flux cleaned = 0.000145 Jy
! Component: 150  -  total flux cleaned = 0.000159301 Jy
! Component: 200  -  total flux cleaned = 0.000145737 Jy
! Total flux subtracted in 200 components = 0.000145737 Jy
! Clean residual min=-0.001859 max=0.002459 Jy/beam
! Clean residual mean=-0.000010 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.190208 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 194 components and 0.190208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075414Jy  sigma=1.327970
! Fit after  self-cal, rms=0.075409Jy  sigma=1.327949
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.766 mas, bpa=1.425 degrees
! Estimated noise=0.244522 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.035 x 2.766 at 1.425 degrees (North through East)
! Clean map  min=-0.0017429  max=0.097693 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7181 mas, bmaj=1.924 mas, bpa=-2.783 degrees
! Estimated noise=0.517795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068478 Jy
! Component: 100  -  total flux cleaned = 0.102599 Jy
! Component: 150  -  total flux cleaned = 0.123027 Jy
! Component: 200  -  total flux cleaned = 0.13579 Jy
! Total flux subtracted in 200 components = 0.13579 Jy
! Clean residual min=-0.004445 max=0.007083 Jy/beam
! Clean residual mean=-0.000011 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 0.13579 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.13579 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.766 mas, bpa=1.425 degrees
! Estimated noise=0.244522 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169487 Jy
! Component: 100  -  total flux cleaned = 0.027363 Jy
! Component: 150  -  total flux cleaned = 0.0341344 Jy
! Component: 200  -  total flux cleaned = 0.0389423 Jy
! Total flux subtracted in 200 components = 0.0389423 Jy
! Clean residual min=-0.002704 max=0.003772 Jy/beam
! Clean residual mean=-0.000009 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.174732 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 77 components and 0.174732 Jy
! Inverting map 
! Added new window around map position (-1.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396398 Jy
! Component: 100  -  total flux cleaned = 0.00686351 Jy
! Component: 150  -  total flux cleaned = 0.00914493 Jy
! Component: 200  -  total flux cleaned = 0.0106911 Jy
! Total flux subtracted in 200 components = 0.0106911 Jy
! Clean residual min=-0.002357 max=0.002047 Jy/beam
! Clean residual mean=-0.000007 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.185423 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 109 components and 0.185423 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.319 mas, bmaj=5.851 mas, bpa=1.414 degrees
! Estimated noise=0.283657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020092 Jy
! Component: 100  -  total flux cleaned = 0.00322484 Jy
! Component: 150  -  total flux cleaned = 0.00372202 Jy
! Component: 200  -  total flux cleaned = 0.00403278 Jy
! Total flux subtracted in 200 components = 0.00403278 Jy
! Clean residual min=-0.002078 max=0.002450 Jy/beam
! Clean residual mean=-0.000011 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.189456 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.97186e-05 Jy
! Component: 100  -  total flux cleaned = 0.000140579 Jy
! Component: 150  -  total flux cleaned = 0.000212659 Jy
! Component: 200  -  total flux cleaned = 0.000234499 Jy
! Total flux subtracted in 200 components = 0.000234499 Jy
! Clean residual min=-0.001944 max=0.002469 Jy/beam
! Clean residual mean=-0.000011 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.189691 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 149 components and 0.189691 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.766 mas, bpa=1.425 degrees
! Estimated noise=0.244522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000668767 Jy
! Component: 100  -  total flux cleaned = -0.000824376 Jy
! Component: 150  -  total flux cleaned = -0.000958821 Jy
! Component: 200  -  total flux cleaned = -0.00101925 Jy
! Total flux subtracted in 200 components = -0.00101925 Jy
! Clean residual min=-0.001926 max=0.001908 Jy/beam
! Clean residual mean=-0.000006 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.188671 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 162 components and 0.188671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075410Jy  sigma=1.328106
! Fit after  self-cal, rms=0.075380Jy  sigma=1.327762
wmodel /J0246-2935_X_map.mod
! wmodel: Unable to open new model file: /J0246-2935_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0246-2935_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.035 x 2.766 at 1.425 degrees (North through East)
! Clean map  min=-0.0018495  max=0.098154 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0246-2935_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0981542 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000455645 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.39264 1.39264 2.78528 5.57057 11.1411 22.2823 44.5645 89.1291
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.098 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  215.417 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0246-2935_X_dfm.log closed on Thu May 19 19:58:47 2016