! Started logfile: /scr/pima/bg219b_uvs/J0245-1107_X_dfm.log on Thu May 19 19:58:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0245-1107_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0245-1107_X_uva.fits
! AN table 1: 51 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.896732 visibilities/baseline/integration-bin.
! Found source: J0245-1107
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24696 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0245-1107_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014197Jy  sigma=22.643527
! Fit after  self-cal, rms=0.863530Jy  sigma=19.138068
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6729 mas, bmaj=1.69 mas, bpa=-4.479 degrees
! Estimated noise=0.394422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0986595 Jy
! Component: 100  -  total flux cleaned = 0.135675 Jy
! Total flux subtracted in 100 components = 0.135675 Jy
! Clean residual min=-0.005768 max=0.018240 Jy/beam
! Clean residual mean=-0.000011 rms=0.001887 Jy/beam
! Combined flux in latest and established models = 0.135675 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.135675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081480Jy  sigma=1.716756
! Fit after  self-cal, rms=0.081249Jy  sigma=1.712173
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0197377 Jy
! Component: 100  -  total flux cleaned = 0.0312268 Jy
! Total flux subtracted in 100 components = 0.0312268 Jy
! Clean residual min=-0.004484 max=0.012945 Jy/beam
! Clean residual mean=-0.000006 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 0.166902 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 25 components and 0.166902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073958Jy  sigma=1.509853
! Fit after  self-cal, rms=0.073937Jy  sigma=1.509177
! Inverting map 
! Added new window around map position (-1, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010996 Jy
! Component: 100  -  total flux cleaned = 0.0167796 Jy
! Total flux subtracted in 100 components = 0.0167796 Jy
! Clean residual min=-0.003716 max=0.008467 Jy/beam
! Clean residual mean=-0.000004 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.183681 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 32 components and 0.183681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071634Jy  sigma=1.447656
! Fit after  self-cal, rms=0.071532Jy  sigma=1.444310
! Inverting map 
! Added new window around map position (1.2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00671699 Jy
! Component: 100  -  total flux cleaned = 0.0105156 Jy
! Total flux subtracted in 100 components = 0.0105156 Jy
! Clean residual min=-0.003285 max=0.004510 Jy/beam
! Clean residual mean=-0.000002 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.194197 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.194197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070621Jy  sigma=1.420399
! Fit after  self-cal, rms=0.070631Jy  sigma=1.420163
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8475 mas, bmaj=2.015 mas, bpa=-3.988 degrees
! Estimated noise=0.214816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00517601 Jy
! Component: 100  -  total flux cleaned = 0.0085375 Jy
! Component: 150  -  total flux cleaned = 0.0109226 Jy
! Component: 200  -  total flux cleaned = 0.0126454 Jy
! Total flux subtracted in 200 components = 0.0126454 Jy
! Clean residual min=-0.002933 max=0.003986 Jy/beam
! Clean residual mean=-0.000010 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 0.206842 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 65 components and 0.206842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070201Jy  sigma=1.408833
! Fit after  self-cal, rms=0.070211Jy  sigma=1.408739
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8475 x 2.015 at -3.988 degrees (North through East)
! Clean map  min=-0.0028755  max=0.12998 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.06     KP        0.98     
!   LA        0.95     MK        0.97     NL        1.01     OV        0.96     
!   PT        1.11     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.08     KP        1.00     
!   LA        0.96     MK        1.05     NL        1.02     OV        1.02     
!   PT        1.09     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.14     KP        1.01     
!   LA        1.02     MK        1.01     NL        1.03     OV        1.00     
!   PT        1.10     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.96     KP        0.95     
!   LA        0.96     MK        1.00     NL        1.01     OV        1.01     
!   PT        1.08     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.00     KP        0.96     
!   LA        0.98     MK        1.02     NL        0.99     OV        0.95     
!   PT        1.08     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.05     KP        1.00     
!   LA        0.96     MK        1.00     NL        1.02     OV        1.02     
!   PT        1.11     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.07     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.02     OV        1.04     
!   PT        1.12     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.92     KP        0.99     
!   LA        0.96     MK        1.02     NL        1.00     OV        0.97     
!   PT        1.11     SC        1.09     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.05     KP        0.97     
!   LA        0.94     MK        1.02     NL        1.01     OV        1.01     
!   PT        1.04     SC        1.06     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        0.95     KP        0.94     
!   LA        0.94     MK        1.00     NL        0.99     OV        0.96     
!   PT        1.05     SC        1.08     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.98     HN        1.02     KP        0.92     
!   LA        0.93     MK        0.95     NL        0.97     OV        0.99     
!   PT        1.04     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.92     HN        0.96     KP        0.96     
!   LA        0.93     MK        0.99     NL        0.97     OV        0.92     
!   PT        1.01     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.070211Jy  sigma=1.408739
! Fit after  self-cal, rms=0.069544Jy  sigma=1.388132
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8517 mas, bmaj=2.022 mas, bpa=-4.017 degrees
! Estimated noise=0.214316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000146298 Jy
! Component: 100  -  total flux cleaned = 0.000381783 Jy
! Component: 150  -  total flux cleaned = 0.00060975 Jy
! Component: 200  -  total flux cleaned = 0.000782476 Jy
! Total flux subtracted in 200 components = 0.000782476 Jy
! Clean residual min=-0.003220 max=0.003411 Jy/beam
! Clean residual mean=-0.000003 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.207625 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 79 components and 0.207625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069511Jy  sigma=1.387626
! Fit after  self-cal, rms=0.069544Jy  sigma=1.387503
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069544Jy  sigma=1.387503
! Fit after  self-cal, rms=0.069765Jy  sigma=1.369626
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8525 mas, bmaj=2.025 mas, bpa=-3.951 degrees
! Estimated noise=0.213808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000746881 Jy
! Component: 100  -  total flux cleaned = -0.00119438 Jy
! Component: 150  -  total flux cleaned = -0.00140961 Jy
! Component: 200  -  total flux cleaned = -0.00149061 Jy
! Total flux subtracted in 200 components = -0.00149061 Jy
! Clean residual min=-0.001594 max=0.002630 Jy/beam
! Clean residual mean=-0.000002 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.206134 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 94 components and 0.206134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069753Jy  sigma=1.369445
! Fit after  self-cal, rms=0.069784Jy  sigma=1.369314
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.6, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022356 Jy
! Component: 100  -  total flux cleaned = 0.00272393 Jy
! Component: 150  -  total flux cleaned = 0.00308258 Jy
! Component: 200  -  total flux cleaned = 0.00330315 Jy
! Total flux subtracted in 200 components = 0.00330315 Jy
! Clean residual min=-0.001425 max=0.001558 Jy/beam
! Clean residual mean=-0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.209437 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 120 components and 0.209437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069712Jy  sigma=1.367193
! Fit after  self-cal, rms=0.069703Jy  sigma=1.367079
! Inverting map 
! Added new window around map position (-24, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142911 Jy
! Component: 100  -  total flux cleaned = 0.00180158 Jy
! Component: 150  -  total flux cleaned = 0.00208723 Jy
! Component: 200  -  total flux cleaned = 0.00213656 Jy
! Total flux subtracted in 200 components = 0.00213656 Jy
! Clean residual min=-0.001408 max=0.001326 Jy/beam
! Clean residual mean=-0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.211574 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 144 components and 0.211574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069660Jy  sigma=1.366130
! Fit after  self-cal, rms=0.069656Jy  sigma=1.365992
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069656Jy  sigma=1.365992
! Fit after  self-cal, rms=0.069539Jy  sigma=1.365827
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.853 mas, bmaj=2.027 mas, bpa=-3.939 degrees
! Estimated noise=0.2131 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179355 Jy
! Component: 100  -  total flux cleaned = 0.000180692 Jy
! Component: 150  -  total flux cleaned = 0.000138884 Jy
! Component: 200  -  total flux cleaned = 0.000118827 Jy
! Total flux subtracted in 200 components = 0.000118827 Jy
! Clean residual min=-0.001366 max=0.001294 Jy/beam
! Clean residual mean=-0.000000 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.211693 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 160 components and 0.211693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069520Jy  sigma=1.365485
! Fit after  self-cal, rms=0.069521Jy  sigma=1.365459
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121975 Jy
! Component: 100  -  total flux cleaned = 8.47777e-05 Jy
! Component: 150  -  total flux cleaned = 4.97305e-05 Jy
! Component: 200  -  total flux cleaned = 1.67273e-05 Jy
! Total flux subtracted in 200 components = 1.67273e-05 Jy
! Clean residual min=-0.001366 max=0.001289 Jy/beam
! Clean residual mean=-0.000000 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.21171 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 170 components and 0.21171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069511Jy  sigma=1.365278
! Fit after  self-cal, rms=0.069511Jy  sigma=1.365271
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069511Jy  sigma=1.365271
! Fit after  self-cal, rms=0.069752Jy  sigma=1.364291
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.185 mas, bmaj=3.901 mas, bpa=-3.486 degrees
! Estimated noise=0.268571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000332087 Jy
! Component: 100  -  total flux cleaned = -0.000429072 Jy
! Component: 150  -  total flux cleaned = -0.000445075 Jy
! Component: 200  -  total flux cleaned = -0.000445397 Jy
! Total flux subtracted in 200 components = -0.000445397 Jy
! Clean residual min=-0.001605 max=0.001370 Jy/beam
! Clean residual mean=0.000000 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.211264 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 189 components and 0.211264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069748Jy  sigma=1.364185
! Fit after  self-cal, rms=0.069753Jy  sigma=1.364166
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.99654e-05 Jy
! Component: 100  -  total flux cleaned = -5.01965e-05 Jy
! Component: 150  -  total flux cleaned = -7.61516e-05 Jy
! Component: 200  -  total flux cleaned = -0.000100495 Jy
! Total flux subtracted in 200 components = -0.000100495 Jy
! Clean residual min=-0.001586 max=0.001361 Jy/beam
! Clean residual mean=0.000000 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.211164 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 194 components and 0.211164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069751Jy  sigma=1.364127
! Fit after  self-cal, rms=0.069751Jy  sigma=1.364121
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.853 mas, bmaj=2.028 mas, bpa=-3.917 degrees
! Estimated noise=0.212889 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.853 x 2.028 at -3.917 degrees (North through East)
! Clean map  min=-0.0013624  max=0.12879 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6755 mas, bmaj=1.695 mas, bpa=-4.382 degrees
! Estimated noise=0.391957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0979781 Jy
! Component: 100  -  total flux cleaned = 0.135052 Jy
! Component: 150  -  total flux cleaned = 0.15552 Jy
! Component: 200  -  total flux cleaned = 0.168517 Jy
! Total flux subtracted in 200 components = 0.168517 Jy
! Clean residual min=-0.003417 max=0.006921 Jy/beam
! Clean residual mean=-0.000005 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.168517 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.168517 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.853 mas, bmaj=2.028 mas, bpa=-3.917 degrees
! Estimated noise=0.212889 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134153 Jy
! Component: 100  -  total flux cleaned = 0.0210027 Jy
! Component: 150  -  total flux cleaned = 0.0257365 Jy
! Component: 200  -  total flux cleaned = 0.029124 Jy
! Total flux subtracted in 200 components = 0.029124 Jy
! Clean residual min=-0.001910 max=0.002099 Jy/beam
! Clean residual mean=-0.000006 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.197641 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 52 components and 0.197641 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.185 mas, bmaj=3.901 mas, bpa=-3.486 degrees
! Estimated noise=0.268571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00449413 Jy
! Component: 100  -  total flux cleaned = 0.00745423 Jy
! Component: 150  -  total flux cleaned = 0.00952351 Jy
! Component: 200  -  total flux cleaned = 0.0105803 Jy
! Total flux subtracted in 200 components = 0.0105803 Jy
! Clean residual min=-0.001761 max=0.001548 Jy/beam
! Clean residual mean=-0.000004 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.208222 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000683835 Jy
! Component: 100  -  total flux cleaned = 0.00112388 Jy
! Component: 150  -  total flux cleaned = 0.0014238 Jy
! Component: 200  -  total flux cleaned = 0.00167826 Jy
! Total flux subtracted in 200 components = 0.00167826 Jy
! Clean residual min=-0.001618 max=0.001451 Jy/beam
! Clean residual mean=-0.000001 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.2099 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 105 components and 0.2099 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.853 mas, bmaj=2.028 mas, bpa=-3.917 degrees
! Estimated noise=0.212889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157763 Jy
! Component: 100  -  total flux cleaned = 0.000194133 Jy
! Component: 150  -  total flux cleaned = 0.000230364 Jy
! Component: 200  -  total flux cleaned = 0.000261586 Jy
! Total flux subtracted in 200 components = 0.000261586 Jy
! Clean residual min=-0.001293 max=0.001287 Jy/beam
! Clean residual mean=-0.000000 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.210162 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 123 components and 0.210162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069794Jy  sigma=1.365029
! Fit after  self-cal, rms=0.069791Jy  sigma=1.364898
wmodel /J0245-1107_X_map.mod
! wmodel: Unable to open new model file: /J0245-1107_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0245-1107_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.853 x 2.028 at -3.917 degrees (North through East)
! Clean map  min=-0.0012331  max=0.12894 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0245-1107_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.12894 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000303275 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.705618 0.705618 1.41124 2.82247 5.64495 11.2899 22.5798 45.1596 90.3192
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.128 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  425.158 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0245-1107_X_dfm.log closed on Thu May 19 19:58:39 2016