! Started logfile: /scr/pima/bg219b_uvs/J0243-0550_X_dfm.log on Thu May 19 19:58:28 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0243-0550_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0243-0550_X_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.795062 visibilities/baseline/integration-bin.
! Found source: J0243-0550
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0243-0550_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.182142Jy  sigma=23.080317
! Fit after  self-cal, rms=0.414215Jy  sigma=8.129630
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.702 mas, bmaj=1.71 mas, bpa=-3.216 degrees
! Estimated noise=0.508327 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.458824 Jy
! Component: 100  -  total flux cleaned = 0.559183 Jy
! Total flux subtracted in 100 components = 0.559183 Jy
! Clean residual min=-0.023057 max=0.052489 Jy/beam
! Clean residual mean=0.000029 rms=0.005052 Jy/beam
! Combined flux in latest and established models = 0.559183 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.559183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138797Jy  sigma=2.655329
! Fit after  self-cal, rms=0.138767Jy  sigma=2.654850
! Inverting map 
! Added new window around map position (-1.2, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0501371 Jy
! Component: 100  -  total flux cleaned = 0.0822807 Jy
! Total flux subtracted in 100 components = 0.0822807 Jy
! Clean residual min=-0.018346 max=0.020181 Jy/beam
! Clean residual mean=0.000013 rms=0.003644 Jy/beam
! Combined flux in latest and established models = 0.641464 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.641464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.108067Jy  sigma=2.035252
! Fit after  self-cal, rms=0.106678Jy  sigma=2.009493
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0257109 Jy
! Component: 100  -  total flux cleaned = 0.0445748 Jy
! Total flux subtracted in 100 components = 0.0445748 Jy
! Clean residual min=-0.014242 max=0.016005 Jy/beam
! Clean residual mean=0.000004 rms=0.003031 Jy/beam
! Combined flux in latest and established models = 0.686039 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 36 components and 0.686039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095560Jy  sigma=1.774408
! Fit after  self-cal, rms=0.095230Jy  sigma=1.768513
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8999 mas, bmaj=2.017 mas, bpa=-2.393 degrees
! Estimated noise=0.283056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0243089 Jy
! Component: 100  -  total flux cleaned = 0.0399846 Jy
! Component: 150  -  total flux cleaned = 0.0507127 Jy
! Component: 200  -  total flux cleaned = 0.0581044 Jy
! Total flux subtracted in 200 components = 0.0581044 Jy
! Clean residual min=-0.009727 max=0.014953 Jy/beam
! Clean residual mean=-0.000022 rms=0.002927 Jy/beam
! Combined flux in latest and established models = 0.744143 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 54 components and 0.744143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088301Jy  sigma=1.606572
! Fit after  self-cal, rms=0.088059Jy  sigma=1.601630
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8999 x 2.017 at -2.393 degrees (North through East)
! Clean map  min=-0.0085742  max=0.59494 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.04     KP        0.95     
!   LA        0.97     MK        0.98     NL        1.03     OV        0.97     
!   PT        1.07     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.05     KP        0.97     
!   LA        0.98     MK        1.03     NL        1.05     OV        0.99     
!   PT        1.07     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.07     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.06     OV        1.01     
!   PT        1.09     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.00     KP        0.96     
!   LA        0.97     MK        1.01     NL        1.02     OV        0.97     
!   PT        1.09     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.01     KP        0.97     
!   LA        0.96     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.06     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.05     OV        0.99     
!   PT        1.09     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        1.01     
!   LA        0.99     MK        1.04     NL        1.05     OV        1.00     
!   PT        1.10     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.95     MK        1.01     NL        1.03     OV        0.96     
!   PT        1.10     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        0.96     
!   LA        0.95     MK        1.02     NL        1.04     OV        0.98     
!   PT        1.06     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        0.99     KP        0.95     
!   LA        0.93     MK        1.00     NL        1.00     OV        0.95     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.00     KP        0.92     
!   LA        0.92     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.04     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.92     HN        0.94     KP        0.93     
!   LA        0.94     MK        0.96     NL        0.98     OV        0.91     
!   PT        1.00     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.088059Jy  sigma=1.601630
! Fit after  self-cal, rms=0.077357Jy  sigma=1.398897
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9048 mas, bmaj=2.025 mas, bpa=-2.384 degrees
! Estimated noise=0.28143 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141544 Jy
! Component: 100  -  total flux cleaned = -0.000577013 Jy
! Component: 150  -  total flux cleaned = -0.000833275 Jy
! Component: 200  -  total flux cleaned = -0.00104411 Jy
! Total flux subtracted in 200 components = -0.00104411 Jy
! Clean residual min=-0.008971 max=0.010951 Jy/beam
! Clean residual mean=-0.000029 rms=0.002346 Jy/beam
! Combined flux in latest and established models = 0.743099 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 65 components and 0.743099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077078Jy  sigma=1.394519
! Fit after  self-cal, rms=0.077069Jy  sigma=1.394134
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077069Jy  sigma=1.394134
! Fit after  self-cal, rms=0.072759Jy  sigma=1.319016
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9063 mas, bmaj=2.029 mas, bpa=-2.168 degrees
! Estimated noise=0.280235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00468307 Jy
! Component: 100  -  total flux cleaned = -0.00745257 Jy
! Component: 150  -  total flux cleaned = -0.00866476 Jy
! Component: 200  -  total flux cleaned = -0.00918043 Jy
! Total flux subtracted in 200 components = -0.00918043 Jy
! Clean residual min=-0.004835 max=0.008448 Jy/beam
! Clean residual mean=-0.000021 rms=0.001648 Jy/beam
! Combined flux in latest and established models = 0.733918 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 72 components and 0.733918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072276Jy  sigma=1.314706
! Fit after  self-cal, rms=0.072248Jy  sigma=1.314199
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21, -46.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00778612 Jy
! Component: 100  -  total flux cleaned = 0.0120309 Jy
! Component: 150  -  total flux cleaned = 0.0144353 Jy
! Component: 200  -  total flux cleaned = 0.0158884 Jy
! Total flux subtracted in 200 components = 0.0158884 Jy
! Clean residual min=-0.005196 max=0.006958 Jy/beam
! Clean residual mean=-0.000021 rms=0.001539 Jy/beam
! Combined flux in latest and established models = 0.749807 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 111 components and 0.749807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071110Jy  sigma=1.298681
! Fit after  self-cal, rms=0.071058Jy  sigma=1.296902
! Inverting map 
! Added new window around map position (-14.4, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693496 Jy
! Component: 100  -  total flux cleaned = 0.00970664 Jy
! Component: 150  -  total flux cleaned = 0.0109027 Jy
! Component: 200  -  total flux cleaned = 0.0119596 Jy
! Total flux subtracted in 200 components = 0.0119596 Jy
! Clean residual min=-0.005088 max=0.005973 Jy/beam
! Clean residual mean=-0.000017 rms=0.001408 Jy/beam
! Combined flux in latest and established models = 0.761766 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 137 components and 0.761766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070093Jy  sigma=1.284547
! Fit after  self-cal, rms=0.070020Jy  sigma=1.282659
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070020Jy  sigma=1.282659
! Fit after  self-cal, rms=0.065955Jy  sigma=1.218371
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9068 mas, bmaj=2.029 mas, bpa=-2.221 degrees
! Estimated noise=0.28071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00122208 Jy
! Component: 100  -  total flux cleaned = -0.00241381 Jy
! Component: 150  -  total flux cleaned = -0.00343969 Jy
! Component: 200  -  total flux cleaned = -0.00421332 Jy
! Total flux subtracted in 200 components = -0.00421332 Jy
! Clean residual min=-0.002819 max=0.002498 Jy/beam
! Clean residual mean=-0.000008 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.757553 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 165 components and 0.757553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065806Jy  sigma=1.214833
! Fit after  self-cal, rms=0.065808Jy  sigma=1.214644
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000563151 Jy
! Component: 100  -  total flux cleaned = -0.00123295 Jy
! Component: 150  -  total flux cleaned = -0.00167603 Jy
! Component: 200  -  total flux cleaned = -0.00208168 Jy
! Total flux subtracted in 200 components = -0.00208168 Jy
! Clean residual min=-0.002629 max=0.002388 Jy/beam
! Clean residual mean=-0.000008 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.755471 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 176 components and 0.755471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065764Jy  sigma=1.213585
! Fit after  self-cal, rms=0.065759Jy  sigma=1.213538
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065759Jy  sigma=1.213538
! Fit after  self-cal, rms=0.065721Jy  sigma=1.213030
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.157 mas, bmaj=3.425 mas, bpa=-4.495 degrees
! Estimated noise=0.354236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00210944 Jy
! Component: 100  -  total flux cleaned = -0.00315111 Jy
! Component: 150  -  total flux cleaned = -0.00366408 Jy
! Component: 200  -  total flux cleaned = -0.00388077 Jy
! Total flux subtracted in 200 components = -0.00388077 Jy
! Clean residual min=-0.002934 max=0.002957 Jy/beam
! Clean residual mean=-0.000013 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.75159 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 197 components and 0.751591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065689Jy  sigma=1.212159
! Fit after  self-cal, rms=0.065681Jy  sigma=1.212058
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000294451 Jy
! Component: 100  -  total flux cleaned = -0.000360667 Jy
! Component: 150  -  total flux cleaned = -0.000476365 Jy
! Component: 200  -  total flux cleaned = -0.000578613 Jy
! Total flux subtracted in 200 components = -0.000578613 Jy
! Clean residual min=-0.002769 max=0.002919 Jy/beam
! Clean residual mean=-0.000013 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.751012 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 209 components and 0.751012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065671Jy  sigma=1.211761
! Fit after  self-cal, rms=0.065666Jy  sigma=1.211703
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9069 mas, bmaj=2.03 mas, bpa=-2.242 degrees
! Estimated noise=0.280543 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9069 x 2.03 at -2.242 degrees (North through East)
! Clean map  min=-0.0022193  max=0.5878 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065666Jy  sigma=1.211703
! Fit after  self-cal, rms=0.061654Jy  sigma=1.118642
! Inverting map and beam 
! Estimated beam: bmin=0.9071 mas, bmaj=2.028 mas, bpa=-2.163 degrees
! Estimated noise=0.279777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114308 Jy
! Component: 100  -  total flux cleaned = -0.00157918 Jy
! Component: 150  -  total flux cleaned = -0.00186641 Jy
! Component: 200  -  total flux cleaned = -0.00206032 Jy
! Total flux subtracted in 200 components = -0.00206032 Jy
! Clean residual min=-0.002132 max=0.002217 Jy/beam
! Clean residual mean=-0.000004 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.748952 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 219 components and 0.748952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061593Jy  sigma=1.117499
! Fit after  self-cal, rms=0.061590Jy  sigma=1.117460
! Inverting map 
! Added new window around map position (-1.2, -8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149589 Jy
! Component: 100  -  total flux cleaned = 0.00219313 Jy
! Component: 150  -  total flux cleaned = 0.00251067 Jy
! Component: 200  -  total flux cleaned = 0.00258773 Jy
! Total flux subtracted in 200 components = 0.00258773 Jy
! Clean residual min=-0.001965 max=0.001854 Jy/beam
! Clean residual mean=-0.000004 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.751539 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 234 components and 0.751539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061486Jy  sigma=1.115457
! Fit after  self-cal, rms=0.061482Jy  sigma=1.115383
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061482Jy  sigma=1.115383
! Fit after  self-cal, rms=0.061358Jy  sigma=1.114969
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7069 mas, bmaj=1.716 mas, bpa=-2.896 degrees
! Estimated noise=0.504157 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.45462 Jy
! Component: 100  -  total flux cleaned = 0.55942 Jy
! Component: 150  -  total flux cleaned = 0.608519 Jy
! Component: 200  -  total flux cleaned = 0.640659 Jy
! Total flux subtracted in 200 components = 0.640659 Jy
! Clean residual min=-0.007927 max=0.017547 Jy/beam
! Clean residual mean=0.000015 rms=0.002160 Jy/beam
! Combined flux in latest and established models = 0.640659 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.640659 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=2.028 mas, bpa=-2.157 degrees
! Estimated noise=0.279236 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0336055 Jy
! Component: 100  -  total flux cleaned = 0.0543302 Jy
! Component: 150  -  total flux cleaned = 0.0675104 Jy
! Component: 200  -  total flux cleaned = 0.0762718 Jy
! Total flux subtracted in 200 components = 0.0762718 Jy
! Clean residual min=-0.003531 max=0.004968 Jy/beam
! Clean residual mean=0.000001 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.716931 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 46 components and 0.716931 Jy
! Inverting map 
! Added new window around map position (-0.2, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00622258 Jy
! Component: 100  -  total flux cleaned = 0.0109411 Jy
! Component: 150  -  total flux cleaned = 0.0147125 Jy
! Component: 200  -  total flux cleaned = 0.0178246 Jy
! Total flux subtracted in 200 components = 0.0178246 Jy
! Clean residual min=-0.002779 max=0.002884 Jy/beam
! Clean residual mean=-0.000003 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.734755 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 78 components and 0.734755 Jy
! Inverting map 
! Added new window around map position (3, 19.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298999 Jy
! Component: 100  -  total flux cleaned = 0.00510704 Jy
! Component: 150  -  total flux cleaned = 0.00680147 Jy
! Component: 200  -  total flux cleaned = 0.00824276 Jy
! Total flux subtracted in 200 components = 0.00824276 Jy
! Clean residual min=-0.002360 max=0.002051 Jy/beam
! Clean residual mean=-0.000003 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.742998 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 103 components and 0.742998 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.156 mas, bmaj=3.423 mas, bpa=-4.458 degrees
! Estimated noise=0.35282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00236415 Jy
! Component: 100  -  total flux cleaned = 0.00394239 Jy
! Component: 150  -  total flux cleaned = 0.0048319 Jy
! Component: 200  -  total flux cleaned = 0.0054584 Jy
! Total flux subtracted in 200 components = 0.0054584 Jy
! Clean residual min=-0.002376 max=0.002613 Jy/beam
! Clean residual mean=-0.000007 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.748456 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000471581 Jy
! Component: 100  -  total flux cleaned = 0.000858346 Jy
! Component: 150  -  total flux cleaned = 0.00113961 Jy
! Component: 200  -  total flux cleaned = 0.00133501 Jy
! Total flux subtracted in 200 components = 0.00133501 Jy
! Clean residual min=-0.002246 max=0.002604 Jy/beam
! Clean residual mean=-0.000007 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.749791 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 152 components and 0.749792 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=2.028 mas, bpa=-2.157 degrees
! Estimated noise=0.279236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352869 Jy
! Component: 100  -  total flux cleaned = -0.000408001 Jy
! Component: 150  -  total flux cleaned = -0.000359602 Jy
! Component: 200  -  total flux cleaned = -0.000269133 Jy
! Total flux subtracted in 200 components = -0.000269133 Jy
! Clean residual min=-0.002036 max=0.002033 Jy/beam
! Clean residual mean=-0.000003 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.749522 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 168 components and 0.749522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061359Jy  sigma=1.115231
! Fit after  self-cal, rms=0.061313Jy  sigma=1.114401
wmodel /J0243-0550_X_map.mod
! wmodel: Unable to open new model file: /J0243-0550_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0243-0550_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.907 x 2.028 at -2.157 degrees (North through East)
! Clean map  min=-0.0018921  max=0.58526 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0243-0550_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.585261 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000447543 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.229407 0.229407 0.458813 0.917627 1.83525 3.67051 7.34102 14.682 29.3641 58.7281
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.585 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1307.72 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0243-0550_X_dfm.log closed on Thu May 19 19:58:31 2016