! Started logfile: /scr/pima/bg219b_uvs/J0214+5144_X_dfm.log on Thu May 19 19:56:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0214+5144_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0214+5144_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.894265 visibilities/baseline/integration-bin.
! Found source: J0214+5144
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29940 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0214+5144_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003226Jy  sigma=24.346931
! Fit after  self-cal, rms=0.905014Jy  sigma=21.941096
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7899 mas, bmaj=0.9931 mas, bpa=-7.627 degrees
! Estimated noise=0.446491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0689466 Jy
! Component: 100  -  total flux cleaned = 0.0880745 Jy
! Total flux subtracted in 100 components = 0.0880745 Jy
! Clean residual min=-0.004751 max=0.008604 Jy/beam
! Clean residual mean=0.000013 rms=0.001220 Jy/beam
! Combined flux in latest and established models = 0.0880745 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0880745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065152Jy  sigma=1.508805
! Fit after  self-cal, rms=0.064997Jy  sigma=1.504853
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00999907 Jy
! Component: 100  -  total flux cleaned = 0.0156147 Jy
! Total flux subtracted in 100 components = 0.0156147 Jy
! Clean residual min=-0.003938 max=0.006133 Jy/beam
! Clean residual mean=0.000008 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.103689 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.103689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062722Jy  sigma=1.441481
! Fit after  self-cal, rms=0.062714Jy  sigma=1.440701
! Inverting map 
! Added new window around map position (1.2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00597299 Jy
! Component: 100  -  total flux cleaned = 0.00975865 Jy
! Total flux subtracted in 100 components = 0.00975865 Jy
! Clean residual min=-0.003920 max=0.003799 Jy/beam
! Clean residual mean=0.000006 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.113448 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.113448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061876Jy  sigma=1.417427
! Fit after  self-cal, rms=0.061840Jy  sigma=1.416442
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.064 mas, bmaj=1.285 mas, bpa=-2.329 degrees
! Estimated noise=0.18299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00669347 Jy
! Component: 100  -  total flux cleaned = 0.010853 Jy
! Component: 150  -  total flux cleaned = 0.0138287 Jy
! Component: 200  -  total flux cleaned = 0.0153503 Jy
! Total flux subtracted in 200 components = 0.0153503 Jy
! Clean residual min=-0.002640 max=0.004116 Jy/beam
! Clean residual mean=0.000012 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.128798 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 48 components and 0.128798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061060Jy  sigma=1.393596
! Fit after  self-cal, rms=0.061005Jy  sigma=1.392045
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.064 x 1.285 at -2.329 degrees (North through East)
! Clean map  min=-0.0023967  max=0.094697 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        1.00     KP        0.97     
!   LA        0.98     MK        0.99     NL        1.04     OV        0.95     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        1.02     
!   LA        0.97     MK        1.02     NL        1.03     OV        0.99     
!   PT        1.12     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.01     KP        1.05     
!   LA        1.03     MK        1.04     NL        1.07     OV        1.00     
!   PT        1.08     SC        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        1.08     KP        0.97     
!   LA        0.97     MK        1.02     NL        1.03     OV        0.97     
!   PT        1.05     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.99     KP        1.00     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        1.03     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.06     OV        0.96     
!   PT        1.09     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        1.03     
!   LA        1.02     MK        1.01     NL        1.03     OV        0.99     
!   PT        1.11     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.96     KP        0.97     
!   LA        0.97     MK        1.01     NL        0.99     OV        0.91     
!   PT        1.08     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.93     KP        1.00     
!   LA        0.97     MK        1.03     NL        1.05     OV        0.92     
!   PT        1.09     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.96     HN        0.94     KP        0.97     
!   LA        0.95     MK        0.97     NL        0.99     OV        0.93     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        0.94     KP        0.94     
!   LA        0.94     MK        1.02     NL        1.01     OV        0.92     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.93     HN        0.94     KP        0.95     
!   LA        0.97     MK        0.93     NL        0.98     OV        0.94     
!   PT        0.98     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.061005Jy  sigma=1.392045
! Fit after  self-cal, rms=0.059352Jy  sigma=1.380361
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.07 mas, bmaj=1.291 mas, bpa=-2.675 degrees
! Estimated noise=0.180319 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190232 Jy
! Component: 100  -  total flux cleaned = 0.00258565 Jy
! Component: 150  -  total flux cleaned = 0.00290807 Jy
! Component: 200  -  total flux cleaned = 0.00298512 Jy
! Total flux subtracted in 200 components = 0.00298512 Jy
! Clean residual min=-0.002511 max=0.002746 Jy/beam
! Clean residual mean=0.000012 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.131783 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 64 components and 0.131783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059265Jy  sigma=1.377780
! Fit after  self-cal, rms=0.059281Jy  sigma=1.377472
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059281Jy  sigma=1.377472
! Fit after  self-cal, rms=0.058774Jy  sigma=1.369129
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.072 mas, bmaj=1.294 mas, bpa=-2.584 degrees
! Estimated noise=0.178899 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00137775 Jy
! Component: 100  -  total flux cleaned = -0.00204451 Jy
! Component: 150  -  total flux cleaned = -0.00225141 Jy
! Component: 200  -  total flux cleaned = -0.0024526 Jy
! Total flux subtracted in 200 components = -0.0024526 Jy
! Clean residual min=-0.001663 max=0.002019 Jy/beam
! Clean residual mean=0.000000 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.129331 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 80 components and 0.129331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058733Jy  sigma=1.368202
! Fit after  self-cal, rms=0.058741Jy  sigma=1.368036
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.2, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196443 Jy
! Component: 100  -  total flux cleaned = 0.00321252 Jy
! Component: 150  -  total flux cleaned = 0.00412338 Jy
! Component: 200  -  total flux cleaned = 0.00482794 Jy
! Total flux subtracted in 200 components = 0.00482794 Jy
! Clean residual min=-0.001578 max=0.001651 Jy/beam
! Clean residual mean=0.000003 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.134159 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 106 components and 0.134159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058659Jy  sigma=1.366072
! Fit after  self-cal, rms=0.058656Jy  sigma=1.365929
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058656Jy  sigma=1.365929
! Fit after  self-cal, rms=0.058412Jy  sigma=1.363927
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.072 mas, bmaj=1.295 mas, bpa=-2.299 degrees
! Estimated noise=0.177939 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.93823e-05 Jy
! Component: 100  -  total flux cleaned = 0.000179851 Jy
! Component: 150  -  total flux cleaned = 0.000334741 Jy
! Component: 200  -  total flux cleaned = 0.00040378 Jy
! Total flux subtracted in 200 components = 0.00040378 Jy
! Clean residual min=-0.001229 max=0.001470 Jy/beam
! Clean residual mean=0.000000 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.134562 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 118 components and 0.134562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058394Jy  sigma=1.363543
! Fit after  self-cal, rms=0.058401Jy  sigma=1.363485
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20.6, 19.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130738 Jy
! Component: 100  -  total flux cleaned = 0.0016764 Jy
! Component: 150  -  total flux cleaned = 0.0019404 Jy
! Component: 200  -  total flux cleaned = 0.00214561 Jy
! Total flux subtracted in 200 components = 0.00214561 Jy
! Clean residual min=-0.001155 max=0.001170 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.136708 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 137 components and 0.136708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058362Jy  sigma=1.362679
! Fit after  self-cal, rms=0.058361Jy  sigma=1.362626
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058361Jy  sigma=1.362626
! Fit after  self-cal, rms=0.058136Jy  sigma=1.362535
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.296 mas, bmaj=2.434 mas, bpa=24.78 degrees
! Estimated noise=0.219036 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159719 Jy
! Component: 100  -  total flux cleaned = 0.000523188 Jy
! Component: 150  -  total flux cleaned = 0.000740455 Jy
! Component: 200  -  total flux cleaned = 0.000910575 Jy
! Total flux subtracted in 200 components = 0.000910575 Jy
! Clean residual min=-0.001376 max=0.001433 Jy/beam
! Clean residual mean=0.000003 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.137619 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 147 components and 0.137619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058131Jy  sigma=1.362435
! Fit after  self-cal, rms=0.058129Jy  sigma=1.362379
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142706 Jy
! Component: 100  -  total flux cleaned = 0.000298868 Jy
! Component: 150  -  total flux cleaned = 0.000381602 Jy
! Component: 200  -  total flux cleaned = 0.000456567 Jy
! Total flux subtracted in 200 components = 0.000456567 Jy
! Clean residual min=-0.001360 max=0.001409 Jy/beam
! Clean residual mean=0.000004 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.138075 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 148 components and 0.138075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058128Jy  sigma=1.362361
! Fit after  self-cal, rms=0.058127Jy  sigma=1.362347
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=1.295 mas, bpa=-2.155 degrees
! Estimated noise=0.177223 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.073 x 1.295 at -2.155 degrees (North through East)
! Clean map  min=-0.0015123  max=0.092392 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7951 mas, bmaj=1.001 mas, bpa=-8.231 degrees
! Estimated noise=0.434016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.067101 Jy
! Component: 100  -  total flux cleaned = 0.0861377 Jy
! Component: 150  -  total flux cleaned = 0.0956666 Jy
! Component: 200  -  total flux cleaned = 0.10177 Jy
! Total flux subtracted in 200 components = 0.10177 Jy
! Clean residual min=-0.003579 max=0.003790 Jy/beam
! Clean residual mean=0.000005 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.10177 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.10177 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=1.295 mas, bpa=-2.155 degrees
! Estimated noise=0.177223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00817852 Jy
! Component: 100  -  total flux cleaned = 0.0134888 Jy
! Component: 150  -  total flux cleaned = 0.0172607 Jy
! Component: 200  -  total flux cleaned = 0.0201247 Jy
! Total flux subtracted in 200 components = 0.0201247 Jy
! Clean residual min=-0.001821 max=0.001959 Jy/beam
! Clean residual mean=0.000002 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.121894 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 59 components and 0.121894 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.296 mas, bmaj=2.434 mas, bpa=24.78 degrees
! Estimated noise=0.219036 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00385176 Jy
! Component: 100  -  total flux cleaned = 0.00652149 Jy
! Component: 150  -  total flux cleaned = 0.00844019 Jy
! Component: 200  -  total flux cleaned = 0.00961252 Jy
! Total flux subtracted in 200 components = 0.00961252 Jy
! Clean residual min=-0.001713 max=0.001997 Jy/beam
! Clean residual mean=0.000003 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.131507 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104311 Jy
! Component: 100  -  total flux cleaned = 0.00188972 Jy
! Component: 150  -  total flux cleaned = 0.00265962 Jy
! Component: 200  -  total flux cleaned = 0.00329055 Jy
! Total flux subtracted in 200 components = 0.00329055 Jy
! Clean residual min=-0.001538 max=0.001653 Jy/beam
! Clean residual mean=0.000004 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.134797 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 108 components and 0.134797 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=1.295 mas, bpa=-2.155 degrees
! Estimated noise=0.177223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106947 Jy
! Component: 100  -  total flux cleaned = 0.00158214 Jy
! Component: 150  -  total flux cleaned = 0.00185694 Jy
! Component: 200  -  total flux cleaned = 0.00210318 Jy
! Total flux subtracted in 200 components = 0.00210318 Jy
! Clean residual min=-0.001416 max=0.001266 Jy/beam
! Clean residual mean=0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.136901 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 131 components and 0.136901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058180Jy  sigma=1.363574
! Fit after  self-cal, rms=0.058161Jy  sigma=1.363187
wmodel /J0214+5144_X_map.mod
! wmodel: Unable to open new model file: /J0214+5144_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0214+5144_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.073 x 1.295 at -2.155 degrees (North through East)
! Clean map  min=-0.001295  max=0.092203 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0214+5144_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0922031 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000300703 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.978395 0.978395 1.95679 3.91358 7.82716 15.6543 31.3086 62.6173
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  306.624 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0214+5144_X_dfm.log closed on Thu May 19 19:56:59 2016