! Started logfile: /scr/pima/bg219b_uvs/J0213+8717_X_dfm.log on Thu May 19 19:56:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0213+8717_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0213+8717_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.875881 visibilities/baseline/integration-bin.
! Found source: J0213+8717
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19392 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0213+8717_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003247Jy  sigma=23.191281
! Fit after  self-cal, rms=0.916355Jy  sigma=21.149108
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6098 mas, bmaj=1.782 mas, bpa=-53 degrees
! Estimated noise=0.486916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0610269 Jy
! Component: 100  -  total flux cleaned = 0.0788743 Jy
! Total flux subtracted in 100 components = 0.0788743 Jy
! Clean residual min=-0.004731 max=0.008131 Jy/beam
! Clean residual mean=0.000004 rms=0.001058 Jy/beam
! Combined flux in latest and established models = 0.0788743 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0788743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065394Jy  sigma=1.422670
! Fit after  self-cal, rms=0.065153Jy  sigma=1.416489
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00968121 Jy
! Component: 100  -  total flux cleaned = 0.0152004 Jy
! Total flux subtracted in 100 components = 0.0152004 Jy
! Clean residual min=-0.003393 max=0.005257 Jy/beam
! Clean residual mean=0.000002 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.0940747 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.0940747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063443Jy  sigma=1.369357
! Fit after  self-cal, rms=0.063435Jy  sigma=1.368605
! Inverting map 
! Added new window around map position (2, -4.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0050541 Jy
! Component: 100  -  total flux cleaned = 0.00763504 Jy
! Total flux subtracted in 100 components = 0.00763504 Jy
! Clean residual min=-0.003166 max=0.003728 Jy/beam
! Clean residual mean=0.000001 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.10171 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.10171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063069Jy  sigma=1.359021
! Fit after  self-cal, rms=0.063044Jy  sigma=1.358167
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8177 mas, bmaj=2.155 mas, bpa=-54.2 degrees
! Estimated noise=0.228206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.2, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00358317 Jy
! Component: 100  -  total flux cleaned = 0.00565757 Jy
! Component: 150  -  total flux cleaned = 0.00665053 Jy
! Component: 200  -  total flux cleaned = 0.00711109 Jy
! Total flux subtracted in 200 components = 0.00711109 Jy
! Clean residual min=-0.001973 max=0.002496 Jy/beam
! Clean residual mean=0.000005 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.108821 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 45 components and 0.108821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062838Jy  sigma=1.352433
! Fit after  self-cal, rms=0.062825Jy  sigma=1.351780
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8177 x 2.155 at -54.2 degrees (North through East)
! Clean map  min=-0.0017725  max=0.083985 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.02     KP        0.91     
!   LA        0.96     MK        0.94     NL        0.97     OV        0.96     
!   PT        1.14     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.02     KP        0.94     
!   LA        1.01     MK        1.02     NL        1.00     OV        0.99     
!   PT        1.12     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.99     KP        1.02     
!   LA        1.02     MK        1.03     NL        1.03     OV        1.01     
!   PT        1.09     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.94     KP        0.99     
!   LA        0.97     MK        0.94     NL        0.98     OV        0.96     
!   PT        1.11     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.05     HN        1.03     KP        0.97     
!   LA        0.97     MK        0.96     NL        0.95     OV        0.99     
!   PT        1.09     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.99     KP        1.03     
!   LA        0.97     MK        1.10     NL        0.98     OV        0.97     
!   PT        1.13     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.98     KP        1.02     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.11     SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.07     HN        0.96     KP        1.01     
!   LA        0.93     MK        1.04     NL        1.00     OV        0.96     
!   PT        1.14     SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.97     KP        0.96     
!   LA        0.93     MK        1.04     NL        0.97     OV        1.04     
!   PT        1.09     SC        1.08     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        0.94     KP        0.95     
!   LA        0.96     MK        0.96     NL        0.98     OV        1.05     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        0.87     KP        0.95     
!   LA        0.96     MK        1.05     NL        0.95     OV        0.99     
!   PT        1.07     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        0.91     KP        0.95     
!   LA        1.01     MK        0.95     NL        0.94     OV        0.94     
!   PT        1.05     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.062825Jy  sigma=1.351780
! Fit after  self-cal, rms=0.061929Jy  sigma=1.343840
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8175 mas, bmaj=2.153 mas, bpa=-54.35 degrees
! Estimated noise=0.225968 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130746 Jy
! Component: 100  -  total flux cleaned = 0.0019572 Jy
! Component: 150  -  total flux cleaned = 0.00220255 Jy
! Component: 200  -  total flux cleaned = 0.00239824 Jy
! Total flux subtracted in 200 components = 0.00239824 Jy
! Clean residual min=-0.001719 max=0.001885 Jy/beam
! Clean residual mean=0.000012 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.111219 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 62 components and 0.111219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061894Jy  sigma=1.342980
! Fit after  self-cal, rms=0.061916Jy  sigma=1.342608
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061916Jy  sigma=1.342608
! Fit after  self-cal, rms=0.062082Jy  sigma=1.337757
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8161 mas, bmaj=2.154 mas, bpa=-54.41 degrees
! Estimated noise=0.226152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015253 Jy
! Component: 100  -  total flux cleaned = 3.91717e-05 Jy
! Component: 150  -  total flux cleaned = -3.95201e-05 Jy
! Component: 200  -  total flux cleaned = -9.23958e-05 Jy
! Total flux subtracted in 200 components = -9.23958e-05 Jy
! Clean residual min=-0.001266 max=0.001443 Jy/beam
! Clean residual mean=0.000002 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.111127 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 0.111127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062066Jy  sigma=1.337450
! Fit after  self-cal, rms=0.062077Jy  sigma=1.337312
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-47.2, -45.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000507221 Jy
! Component: 100  -  total flux cleaned = 0.00028275 Jy
! Component: 150  -  total flux cleaned = 0.000278062 Jy
! Component: 200  -  total flux cleaned = 0.000393269 Jy
! Total flux subtracted in 200 components = 0.000393269 Jy
! Clean residual min=-0.001160 max=0.001307 Jy/beam
! Clean residual mean=0.000002 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.11152 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 102 components and 0.11152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062046Jy  sigma=1.336566
! Fit after  self-cal, rms=0.062043Jy  sigma=1.336502
! Inverting map 
! Added new window around map position (-36.2, -41.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010592 Jy
! Component: 100  -  total flux cleaned = 0.00130817 Jy
! Component: 150  -  total flux cleaned = 0.00147847 Jy
! Component: 200  -  total flux cleaned = 0.00163525 Jy
! Total flux subtracted in 200 components = 0.00163525 Jy
! Clean residual min=-0.001201 max=0.001126 Jy/beam
! Clean residual mean=0.000001 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.113155 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 117 components and 0.113155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062016Jy  sigma=1.335941
! Fit after  self-cal, rms=0.062014Jy  sigma=1.335885
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062014Jy  sigma=1.335885
! Fit after  self-cal, rms=0.061939Jy  sigma=1.335261
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8168 mas, bmaj=2.156 mas, bpa=-54.4 degrees
! Estimated noise=0.225785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.43502e-05 Jy
! Component: 100  -  total flux cleaned = -0.000121682 Jy
! Component: 150  -  total flux cleaned = -0.000159687 Jy
! Component: 200  -  total flux cleaned = -0.000159413 Jy
! Total flux subtracted in 200 components = -0.000159413 Jy
! Clean residual min=-0.001196 max=0.001137 Jy/beam
! Clean residual mean=-0.000001 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.112996 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 127 components and 0.112996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061925Jy  sigma=1.335000
! Fit after  self-cal, rms=0.061925Jy  sigma=1.334970
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.5421e-05 Jy
! Component: 100  -  total flux cleaned = 5.1445e-05 Jy
! Component: 150  -  total flux cleaned = 8.26335e-05 Jy
! Component: 200  -  total flux cleaned = 9.78983e-05 Jy
! Total flux subtracted in 200 components = 9.78983e-05 Jy
! Clean residual min=-0.001189 max=0.001129 Jy/beam
! Clean residual mean=-0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.113094 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 133 components and 0.113094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061917Jy  sigma=1.334808
! Fit after  self-cal, rms=0.061916Jy  sigma=1.334803
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061916Jy  sigma=1.334803
! Fit after  self-cal, rms=0.061865Jy  sigma=1.334777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.029 mas, bmaj=3.351 mas, bpa=-57.4 degrees
! Estimated noise=0.296209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000450523 Jy
! Component: 100  -  total flux cleaned = -0.000686297 Jy
! Component: 150  -  total flux cleaned = -0.000770463 Jy
! Component: 200  -  total flux cleaned = -0.00079537 Jy
! Total flux subtracted in 200 components = -0.00079537 Jy
! Clean residual min=-0.001308 max=0.001495 Jy/beam
! Clean residual mean=-0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.112298 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 158 components and 0.112298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061861Jy  sigma=1.334723
! Fit after  self-cal, rms=0.061861Jy  sigma=1.334715
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38.2, 32.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000154801 Jy
! Component: 100  -  total flux cleaned = -0.000144314 Jy
! Component: 150  -  total flux cleaned = -0.00032316 Jy
! Component: 200  -  total flux cleaned = -0.000494921 Jy
! Total flux subtracted in 200 components = -0.000494921 Jy
! Clean residual min=-0.001051 max=0.001027 Jy/beam
! Clean residual mean=-0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.111803 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 194 components and 0.111803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061840Jy  sigma=1.334182
! Fit after  self-cal, rms=0.061839Jy  sigma=1.334112
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8173 mas, bmaj=2.157 mas, bpa=-54.4 degrees
! Estimated noise=0.225538 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8173 x 2.157 at -54.4 degrees (North through East)
! Clean map  min=-0.0011636  max=0.083272 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.61 mas, bmaj=1.787 mas, bpa=-53.11 degrees
! Estimated noise=0.478076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0596659 Jy
! Component: 100  -  total flux cleaned = 0.0778697 Jy
! Component: 150  -  total flux cleaned = 0.0876725 Jy
! Component: 200  -  total flux cleaned = 0.0940503 Jy
! Total flux subtracted in 200 components = 0.0940503 Jy
! Clean residual min=-0.003164 max=0.003686 Jy/beam
! Clean residual mean=0.000003 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.0940502 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0940502 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8173 mas, bmaj=2.157 mas, bpa=-54.4 degrees
! Estimated noise=0.225538 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00606096 Jy
! Component: 100  -  total flux cleaned = 0.00933029 Jy
! Component: 150  -  total flux cleaned = 0.0113316 Jy
! Component: 200  -  total flux cleaned = 0.0122237 Jy
! Total flux subtracted in 200 components = 0.0122237 Jy
! Clean residual min=-0.001340 max=0.001510 Jy/beam
! Clean residual mean=0.000005 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.106274 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 43 components and 0.106274 Jy
! Inverting map 
! Added new window around map position (-49.2, 34.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000930594 Jy
! Component: 100  -  total flux cleaned = 0.0014581 Jy
! Component: 150  -  total flux cleaned = 0.00192918 Jy
! Component: 200  -  total flux cleaned = 0.00214424 Jy
! Total flux subtracted in 200 components = 0.00214424 Jy
! Clean residual min=-0.001253 max=0.001276 Jy/beam
! Clean residual mean=0.000002 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.108418 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 67 components and 0.108418 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.029 mas, bmaj=3.351 mas, bpa=-57.4 degrees
! Estimated noise=0.296209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108796 Jy
! Component: 100  -  total flux cleaned = 0.00158138 Jy
! Component: 150  -  total flux cleaned = 0.00199833 Jy
! Component: 200  -  total flux cleaned = 0.00222732 Jy
! Total flux subtracted in 200 components = 0.00222732 Jy
! Clean residual min=-0.001248 max=0.001381 Jy/beam
! Clean residual mean=0.000000 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.110646 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176708 Jy
! Component: 100  -  total flux cleaned = 0.000282872 Jy
! Component: 150  -  total flux cleaned = 0.000356079 Jy
! Component: 200  -  total flux cleaned = 0.000425401 Jy
! Total flux subtracted in 200 components = 0.000425401 Jy
! Clean residual min=-0.001163 max=0.001236 Jy/beam
! Clean residual mean=-0.000000 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.111071 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 156 components and 0.111071 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8173 mas, bmaj=2.157 mas, bpa=-54.4 degrees
! Estimated noise=0.225538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.11941e-05 Jy
! Component: 100  -  total flux cleaned = -0.000231172 Jy
! Component: 150  -  total flux cleaned = -0.000259056 Jy
! Component: 200  -  total flux cleaned = -0.000258473 Jy
! Total flux subtracted in 200 components = -0.000258473 Jy
! Clean residual min=-0.001079 max=0.001088 Jy/beam
! Clean residual mean=-0.000000 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.110812 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 181 components and 0.110812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061845Jy  sigma=1.334311
! Fit after  self-cal, rms=0.061841Jy  sigma=1.334203
wmodel /J0213+8717_X_map.mod
! wmodel: Unable to open new model file: /J0213+8717_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0213+8717_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8173 x 2.157 at -54.4 degrees (North through East)
! Clean map  min=-0.00099564  max=0.083299 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0213+8717_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0832993 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000257781 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.928389 0.928389 1.85678 3.71356 7.42711 14.8542 29.7085 59.4169
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.083 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  323.14 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0213+8717_X_dfm.log closed on Thu May 19 19:56:51 2016