! Started logfile: /scr/pima/bg219b_uvs/J0207+8411_X_dfm.log on Thu May 19 19:56:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0207+8411_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0207+8411_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.892168 visibilities/baseline/integration-bin.
! Found source: J0207+8411
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29388 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0207+8411_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021148Jy  sigma=23.241066
! Fit after  self-cal, rms=0.817037Jy  sigma=18.547331
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6041 mas, bmaj=1.793 mas, bpa=-53.49 degrees
! Estimated noise=0.463257 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142139 Jy
! Component: 100  -  total flux cleaned = 0.173154 Jy
! Total flux subtracted in 100 components = 0.173154 Jy
! Clean residual min=-0.004366 max=0.009025 Jy/beam
! Clean residual mean=0.000027 rms=0.001148 Jy/beam
! Combined flux in latest and established models = 0.173154 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.173154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067615Jy  sigma=1.452724
! Fit after  self-cal, rms=0.067608Jy  sigma=1.452601
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00920688 Jy
! Component: 100  -  total flux cleaned = 0.0140334 Jy
! Total flux subtracted in 100 components = 0.0140334 Jy
! Clean residual min=-0.003822 max=0.006303 Jy/beam
! Clean residual mean=0.000016 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.187187 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 11 components and 0.187187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066131Jy  sigma=1.411989
! Fit after  self-cal, rms=0.066134Jy  sigma=1.411734
! Inverting map 
! Added new window around map position (19.8, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00545226 Jy
! Component: 100  -  total flux cleaned = 0.00799325 Jy
! Total flux subtracted in 100 components = 0.00799325 Jy
! Clean residual min=-0.003574 max=0.004150 Jy/beam
! Clean residual mean=0.000009 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.19518 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.19518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065723Jy  sigma=1.401061
! Fit after  self-cal, rms=0.065673Jy  sigma=1.399369
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8454 mas, bmaj=2.157 mas, bpa=-56.81 degrees
! Estimated noise=0.195456 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261696 Jy
! Component: 100  -  total flux cleaned = 0.0031951 Jy
! Component: 150  -  total flux cleaned = 0.00329854 Jy
! Component: 200  -  total flux cleaned = 0.0032141 Jy
! Total flux subtracted in 200 components = 0.0032141 Jy
! Clean residual min=-0.003043 max=0.003739 Jy/beam
! Clean residual mean=0.000005 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.198394 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 38 components and 0.198394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065547Jy  sigma=1.396031
! Fit after  self-cal, rms=0.065537Jy  sigma=1.395564
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8454 x 2.157 at -56.81 degrees (North through East)
! Clean map  min=-0.0026195  max=0.18207 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.02     KP        0.94     
!   LA        0.97     MK        0.95     NL        0.98     OV        0.94     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.03     KP        0.99     
!   LA        1.02     MK        0.98     NL        1.02     OV        1.00     
!   PT        1.08     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        1.04     KP        1.00     
!   LA        1.02     MK        0.99     NL        1.00     OV        0.99     
!   PT        1.11     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.98     KP        0.97     
!   LA        0.99     MK        0.99     NL        0.99     OV        0.97     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        0.96     
!   LA        0.98     MK        0.97     NL        0.98     OV        0.98     
!   PT        1.08     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.01     OV        1.00     
!   PT        1.11     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.04     KP        1.00     
!   LA        0.99     MK        1.04     NL        1.02     OV        0.99     
!   PT        1.12     SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        0.97     
!   LA        0.99     MK        1.02     NL        1.00     OV        0.99     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.97     KP        0.97     
!   LA        0.97     MK        1.06     NL        1.00     OV        0.98     
!   PT        1.07     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.95     KP        0.96     
!   LA        0.97     MK        0.96     NL        0.98     OV        0.96     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        0.94     
!   LA        0.94     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.93     KP        0.96     
!   LA        0.97     MK        0.95     NL        0.95     OV        0.94     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.065537Jy  sigma=1.395564
! Fit after  self-cal, rms=0.064652Jy  sigma=1.374869
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8456 mas, bmaj=2.158 mas, bpa=-56.77 degrees
! Estimated noise=0.195552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00055088 Jy
! Component: 100  -  total flux cleaned = 0.000690289 Jy
! Component: 150  -  total flux cleaned = 0.000689736 Jy
! Component: 200  -  total flux cleaned = 0.000689441 Jy
! Total flux subtracted in 200 components = 0.000689441 Jy
! Clean residual min=-0.002606 max=0.002457 Jy/beam
! Clean residual mean=0.000018 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.199084 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.199084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064620Jy  sigma=1.374273
! Fit after  self-cal, rms=0.064640Jy  sigma=1.374138
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064640Jy  sigma=1.374138
! Fit after  self-cal, rms=0.064452Jy  sigma=1.360596
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8451 mas, bmaj=2.157 mas, bpa=-56.8 degrees
! Estimated noise=0.196006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00134042 Jy
! Component: 100  -  total flux cleaned = -0.00154792 Jy
! Component: 150  -  total flux cleaned = -0.0016319 Jy
! Component: 200  -  total flux cleaned = -0.00168124 Jy
! Total flux subtracted in 200 components = -0.00168124 Jy
! Clean residual min=-0.001370 max=0.001205 Jy/beam
! Clean residual mean=0.000000 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.197403 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 58 components and 0.197403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064408Jy  sigma=1.359759
! Fit after  self-cal, rms=0.064409Jy  sigma=1.359569
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000332142 Jy
! Component: 100  -  total flux cleaned = -0.000405658 Jy
! Component: 150  -  total flux cleaned = -0.00040659 Jy
! Component: 200  -  total flux cleaned = -0.000407421 Jy
! Total flux subtracted in 200 components = -0.000407421 Jy
! Clean residual min=-0.001251 max=0.001173 Jy/beam
! Clean residual mean=0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.196995 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 70 components and 0.196995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064392Jy  sigma=1.359262
! Fit after  self-cal, rms=0.064388Jy  sigma=1.359234
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064388Jy  sigma=1.359234
! Fit after  self-cal, rms=0.064468Jy  sigma=1.359011
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8463 mas, bmaj=2.158 mas, bpa=-56.79 degrees
! Estimated noise=0.195915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000838292 Jy
! Component: 100  -  total flux cleaned = -0.000994844 Jy
! Component: 150  -  total flux cleaned = -0.00105147 Jy
! Component: 200  -  total flux cleaned = -0.00105082 Jy
! Total flux subtracted in 200 components = -0.00105082 Jy
! Clean residual min=-0.001195 max=0.001188 Jy/beam
! Clean residual mean=0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.195944 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 74 components and 0.195944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064450Jy  sigma=1.358666
! Fit after  self-cal, rms=0.064448Jy  sigma=1.358611
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000192453 Jy
! Component: 100  -  total flux cleaned = -0.000209143 Jy
! Component: 150  -  total flux cleaned = -0.000209106 Jy
! Component: 200  -  total flux cleaned = -0.000208881 Jy
! Total flux subtracted in 200 components = -0.000208881 Jy
! Clean residual min=-0.001110 max=0.001168 Jy/beam
! Clean residual mean=0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.195735 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 83 components and 0.195735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064439Jy  sigma=1.358448
! Fit after  self-cal, rms=0.064437Jy  sigma=1.358431
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064437Jy  sigma=1.358431
! Fit after  self-cal, rms=0.064498Jy  sigma=1.358329
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.062 mas, bmaj=3.327 mas, bpa=-60.41 degrees
! Estimated noise=0.247053 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000573729 Jy
! Component: 100  -  total flux cleaned = -0.000530749 Jy
! Component: 150  -  total flux cleaned = -0.000513508 Jy
! Component: 200  -  total flux cleaned = -0.000459507 Jy
! Total flux subtracted in 200 components = -0.000459507 Jy
! Clean residual min=-0.001310 max=0.001365 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.195276 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 91 components and 0.195276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064491Jy  sigma=1.358234
! Fit after  self-cal, rms=0.064489Jy  sigma=1.358170
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129029 Jy
! Component: 100  -  total flux cleaned = -0.000128764 Jy
! Component: 150  -  total flux cleaned = -8.23159e-05 Jy
! Component: 200  -  total flux cleaned = -4.33533e-05 Jy
! Total flux subtracted in 200 components = -4.33533e-05 Jy
! Clean residual min=-0.001358 max=0.001329 Jy/beam
! Clean residual mean=-0.000001 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.195233 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 99 components and 0.195233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064486Jy  sigma=1.358123
! Fit after  self-cal, rms=0.064484Jy  sigma=1.358101
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8473 mas, bmaj=2.159 mas, bpa=-56.78 degrees
! Estimated noise=0.195821 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8473 x 2.159 at -56.78 degrees (North through East)
! Clean map  min=-0.00098991  max=0.18415 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6058 mas, bmaj=1.801 mas, bpa=-53.44 degrees
! Estimated noise=0.462149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141737 Jy
! Component: 100  -  total flux cleaned = 0.172707 Jy
! Component: 150  -  total flux cleaned = 0.181812 Jy
! Component: 200  -  total flux cleaned = 0.186823 Jy
! Total flux subtracted in 200 components = 0.186823 Jy
! Clean residual min=-0.003033 max=0.003283 Jy/beam
! Clean residual mean=0.000006 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.186823 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.186823 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8473 mas, bmaj=2.159 mas, bpa=-56.78 degrees
! Estimated noise=0.195821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00441015 Jy
! Component: 100  -  total flux cleaned = 0.00630406 Jy
! Component: 150  -  total flux cleaned = 0.00734115 Jy
! Component: 200  -  total flux cleaned = 0.00781164 Jy
! Total flux subtracted in 200 components = 0.00781164 Jy
! Clean residual min=-0.001104 max=0.001233 Jy/beam
! Clean residual mean=-0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.194634 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 0.194634 Jy
! Inverting map 
! Added new window around map position (36, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120882 Jy
! Component: 100  -  total flux cleaned = 0.00117539 Jy
! Component: 150  -  total flux cleaned = 0.00125196 Jy
! Component: 200  -  total flux cleaned = 0.0012995 Jy
! Total flux subtracted in 200 components = 0.0012995 Jy
! Clean residual min=-0.001070 max=0.001081 Jy/beam
! Clean residual mean=0.000000 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.195934 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 48 components and 0.195934 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.062 mas, bmaj=3.327 mas, bpa=-60.41 degrees
! Estimated noise=0.247053 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024123 Jy
! Component: 100  -  total flux cleaned = 0.000306196 Jy
! Component: 150  -  total flux cleaned = 0.00034818 Jy
! Component: 200  -  total flux cleaned = 0.000373078 Jy
! Total flux subtracted in 200 components = 0.000373078 Jy
! Clean residual min=-0.001372 max=0.001119 Jy/beam
! Clean residual mean=0.000000 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.196307 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.19644e-05 Jy
! Component: 100  -  total flux cleaned = 2.19819e-05 Jy
! Component: 150  -  total flux cleaned = 2.2042e-05 Jy
! Component: 200  -  total flux cleaned = 1.31427e-05 Jy
! Total flux subtracted in 200 components = 1.31427e-05 Jy
! Clean residual min=-0.001360 max=0.001117 Jy/beam
! Clean residual mean=-0.000000 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.19632 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 75 components and 0.19632 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8473 mas, bmaj=2.159 mas, bpa=-56.78 degrees
! Estimated noise=0.195821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.93779e-05 Jy
! Component: 100  -  total flux cleaned = -2.45197e-05 Jy
! Component: 150  -  total flux cleaned = 1.05499e-05 Jy
! Component: 200  -  total flux cleaned = 4.30245e-05 Jy
! Total flux subtracted in 200 components = 4.30245e-05 Jy
! Clean residual min=-0.001036 max=0.001069 Jy/beam
! Clean residual mean=0.000000 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.196363 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 89 components and 0.196363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064460Jy  sigma=1.357499
! Fit after  self-cal, rms=0.064453Jy  sigma=1.357372
wmodel /J0207+8411_X_map.mod
! wmodel: Unable to open new model file: /J0207+8411_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0207+8411_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8473 x 2.159 at -56.78 degrees (North through East)
! Clean map  min=-0.00097954  max=0.18464 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0207+8411_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.184641 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000248721 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.404116 0.404116 0.808232 1.61646 3.23293 6.46585 12.9317 25.8634 51.7268
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.184 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  742.361 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0207+8411_X_dfm.log closed on Thu May 19 19:56:17 2016