! Started logfile: /scr/pima/bg219b_uvs/J0207+8411_S_uvs.log on Thu Apr  7 01:09:16 2016
obs /scr/pima/bg219b_uvs/J0207+8411_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0207+8411_S_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.818579 visibilities/baseline/integration-bin.
! Found source: J0207+8411
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 8988 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J0207+8411_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025445Jy  sigma=21.159940
! Fit after  self-cal, rms=0.749683Jy  sigma=15.469067
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.676 mas, bmaj=9.666 mas, bpa=-65.97 degrees
! Estimated noise=0.610745 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.197693 Jy
! Component: 100  -  total flux cleaned = 0.240805 Jy
! Total flux subtracted in 100 components = 0.240805 Jy
! Clean residual min=-0.005384 max=0.012048 Jy/beam
! Clean residual mean=0.000009 rms=0.001605 Jy/beam
! Combined flux in latest and established models = 0.240805 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.240805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070792Jy  sigma=1.394707
! Fit after  self-cal, rms=0.070787Jy  sigma=1.394640
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106926 Jy
! Component: 100  -  total flux cleaned = 0.0140883 Jy
! Total flux subtracted in 100 components = 0.0140883 Jy
! Clean residual min=-0.005215 max=0.006020 Jy/beam
! Clean residual mean=0.000007 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 0.254893 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.254893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069434Jy  sigma=1.372279
! Fit after  self-cal, rms=0.069434Jy  sigma=1.372187
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.438 mas, bmaj=10.31 mas, bpa=-66.26 degrees
! Estimated noise=0.391334 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00189696 Jy
! Component: 100  -  total flux cleaned = -0.002179 Jy
! Component: 150  -  total flux cleaned = -0.00239971 Jy
! Component: 200  -  total flux cleaned = -0.00254091 Jy
! Total flux subtracted in 200 components = -0.00254091 Jy
! Clean residual min=-0.005766 max=0.008401 Jy/beam
! Clean residual mean=0.000010 rms=0.001801 Jy/beam
! Combined flux in latest and established models = 0.252352 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.252352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069288Jy  sigma=1.369577
! Fit after  self-cal, rms=0.069285Jy  sigma=1.369519
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.438 x 10.31 at -66.26 degrees (North through East)
! Clean map  min=-0.0056641  max=0.25202 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.00     HN        1.00     KP        0.96     
!   LA        0.97     MK        0.98     NL        0.98     OV        0.99     
!   PT        1.15     SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.01     KP        1.00     
!   LA        0.97     MK        0.98     NL        0.97     OV        1.00     
!   PT        1.14     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.96     MK        1.00     NL        0.97     OV        0.96     
!   PT        1.09     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.98     
!   LA        0.97     MK        1.01     NL        1.01     OV        0.97     
!   PT        1.08     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.069285Jy  sigma=1.369519
! Fit after  self-cal, rms=0.067364Jy  sigma=1.330582
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.418 mas, bmaj=10.29 mas, bpa=-66.14 degrees
! Estimated noise=0.390364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244677 Jy
! Component: 100  -  total flux cleaned = 0.00374653 Jy
! Component: 150  -  total flux cleaned = 0.00401554 Jy
! Component: 200  -  total flux cleaned = 0.00408893 Jy
! Total flux subtracted in 200 components = 0.00408893 Jy
! Clean residual min=-0.006083 max=0.005193 Jy/beam
! Clean residual mean=-0.000034 rms=0.001472 Jy/beam
! Combined flux in latest and established models = 0.256441 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.256441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067247Jy  sigma=1.328565
! Fit after  self-cal, rms=0.067244Jy  sigma=1.328422
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067244Jy  sigma=1.328422
! Fit after  self-cal, rms=0.064914Jy  sigma=1.277737
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.419 mas, bmaj=10.28 mas, bpa=-66.32 degrees
! Estimated noise=0.388223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00149267 Jy
! Component: 100  -  total flux cleaned = -0.00153489 Jy
! Component: 150  -  total flux cleaned = -0.00153559 Jy
! Component: 200  -  total flux cleaned = -0.0015372 Jy
! Total flux subtracted in 200 components = -0.0015372 Jy
! Clean residual min=-0.002412 max=0.002618 Jy/beam
! Clean residual mean=0.000012 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.254904 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 57 components and 0.254904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064871Jy  sigma=1.276739
! Fit after  self-cal, rms=0.064888Jy  sigma=1.276612
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.06448e-05 Jy
! Component: 100  -  total flux cleaned = -8.05085e-05 Jy
! Component: 150  -  total flux cleaned = -9.6143e-05 Jy
! Component: 200  -  total flux cleaned = -0.000109236 Jy
! Total flux subtracted in 200 components = -0.000109236 Jy
! Clean residual min=-0.002399 max=0.002604 Jy/beam
! Clean residual mean=0.000012 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.254795 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 0.254795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064881Jy  sigma=1.276459
! Fit after  self-cal, rms=0.064882Jy  sigma=1.276454
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064882Jy  sigma=1.276454
! Fit after  self-cal, rms=0.064545Jy  sigma=1.266910
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.414 mas, bmaj=10.27 mas, bpa=-66.42 degrees
! Estimated noise=0.388679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116677 Jy
! Component: 100  -  total flux cleaned = 0.00127908 Jy
! Component: 150  -  total flux cleaned = 0.00132136 Jy
! Component: 200  -  total flux cleaned = 0.00135735 Jy
! Total flux subtracted in 200 components = 0.00135735 Jy
! Clean residual min=-0.001816 max=0.002000 Jy/beam
! Clean residual mean=0.000007 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.256152 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 81 components and 0.256152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064520Jy  sigma=1.266412
! Fit after  self-cal, rms=0.064525Jy  sigma=1.266390
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.35873e-05 Jy
! Component: 100  -  total flux cleaned = 5.81553e-05 Jy
! Component: 150  -  total flux cleaned = 8.01776e-05 Jy
! Component: 200  -  total flux cleaned = 9.93321e-05 Jy
! Total flux subtracted in 200 components = 9.93321e-05 Jy
! Clean residual min=-0.001834 max=0.001974 Jy/beam
! Clean residual mean=0.000007 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.256251 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 88 components and 0.256251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064521Jy  sigma=1.266315
! Fit after  self-cal, rms=0.064521Jy  sigma=1.266313
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064521Jy  sigma=1.266313
! Fit after  self-cal, rms=0.064533Jy  sigma=1.266038
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.269 mas, bmaj=12.17 mas, bpa=-63.73 degrees
! Estimated noise=0.477095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000799574 Jy
! Component: 100  -  total flux cleaned = 0.00095695 Jy
! Component: 150  -  total flux cleaned = 0.000979017 Jy
! Component: 200  -  total flux cleaned = 0.000978836 Jy
! Total flux subtracted in 200 components = 0.000978836 Jy
! Clean residual min=-0.002196 max=0.002272 Jy/beam
! Clean residual mean=0.000015 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.25723 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 98 components and 0.25723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064526Jy  sigma=1.265873
! Fit after  self-cal, rms=0.064523Jy  sigma=1.265861
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.4035e-05 Jy
! Component: 100  -  total flux cleaned = 5.79488e-05 Jy
! Component: 150  -  total flux cleaned = 4.37207e-05 Jy
! Component: 200  -  total flux cleaned = 3.71729e-05 Jy
! Total flux subtracted in 200 components = 3.71729e-05 Jy
! Clean residual min=-0.002204 max=0.002270 Jy/beam
! Clean residual mean=0.000015 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.257267 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 105 components and 0.257267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064523Jy  sigma=1.265845
! Fit after  self-cal, rms=0.064522Jy  sigma=1.265842
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.41 mas, bmaj=10.26 mas, bpa=-66.49 degrees
! Estimated noise=0.388974 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.41 x 10.26 at -66.49 degrees (North through East)
! Clean map  min=-0.0017611  max=0.25031 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.66 mas, bmaj=9.628 mas, bpa=-66.15 degrees
! Estimated noise=0.598458 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193705 Jy
! Component: 100  -  total flux cleaned = 0.235967 Jy
! Component: 150  -  total flux cleaned = 0.24671 Jy
! Component: 200  -  total flux cleaned = 0.251668 Jy
! Total flux subtracted in 200 components = 0.251668 Jy
! Clean residual min=-0.002950 max=0.003299 Jy/beam
! Clean residual mean=0.000007 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.251668 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.251668 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.41 mas, bmaj=10.26 mas, bpa=-66.49 degrees
! Estimated noise=0.388974 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292382 Jy
! Component: 100  -  total flux cleaned = 0.00425539 Jy
! Component: 150  -  total flux cleaned = 0.00467052 Jy
! Component: 200  -  total flux cleaned = 0.00496276 Jy
! Total flux subtracted in 200 components = 0.00496276 Jy
! Clean residual min=-0.001768 max=0.001976 Jy/beam
! Clean residual mean=0.000007 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.256631 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.256631 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.269 mas, bmaj=12.17 mas, bpa=-63.73 degrees
! Estimated noise=0.477095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000455536 Jy
! Component: 100  -  total flux cleaned = 0.000547039 Jy
! Component: 150  -  total flux cleaned = 0.000621983 Jy
! Component: 200  -  total flux cleaned = 0.000695908 Jy
! Total flux subtracted in 200 components = 0.000695908 Jy
! Clean residual min=-0.002306 max=0.002215 Jy/beam
! Clean residual mean=0.000015 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.257327 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.23335e-05 Jy
! Component: 100  -  total flux cleaned = 0.000108795 Jy
! Component: 150  -  total flux cleaned = 0.000115727 Jy
! Component: 200  -  total flux cleaned = 0.00012237 Jy
! Total flux subtracted in 200 components = 0.00012237 Jy
! Clean residual min=-0.002279 max=0.002237 Jy/beam
! Clean residual mean=0.000015 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.257449 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 68 components and 0.257449 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.41 mas, bmaj=10.26 mas, bpa=-66.49 degrees
! Estimated noise=0.388974 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.22709e-05 Jy
! Component: 100  -  total flux cleaned = -9.60687e-05 Jy
! Component: 150  -  total flux cleaned = -9.65112e-05 Jy
! Component: 200  -  total flux cleaned = -9.70175e-05 Jy
! Total flux subtracted in 200 components = -9.70175e-05 Jy
! Clean residual min=-0.001777 max=0.001994 Jy/beam
! Clean residual mean=0.000008 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.257352 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 78 components and 0.257352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064532Jy  sigma=1.266048
! Fit after  self-cal, rms=0.064532Jy  sigma=1.266030
wmodel /scr/pima/bg219b_uvs/J0207+8411_S_map.mod
! Writing 78 model components to file: /scr/pima/bg219b_uvs/J0207+8411_S_map.mod
wobs /scr/pima/bg219b_uvs/J0207+8411_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J0207+8411_S_uvs.fits
wwins /scr/pima/bg219b_uvs/J0207+8411_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219b_uvs/J0207+8411_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000763791 Jy
! Component: 100  -  total flux cleaned = 0.00119491 Jy
! Component: 150  -  total flux cleaned = 0.00169705 Jy
! Component: 200  -  total flux cleaned = 0.00214824 Jy
! Component: 250  -  total flux cleaned = 0.00264025 Jy
! Component: 300  -  total flux cleaned = 0.00308766 Jy
! Component: 350  -  total flux cleaned = 0.00346667 Jy
! Component: 400  -  total flux cleaned = 0.00386047 Jy
! Component: 450  -  total flux cleaned = 0.00409041 Jy
! Component: 500  -  total flux cleaned = 0.00431539 Jy
! Component: 550  -  total flux cleaned = 0.00443764 Jy
! Component: 600  -  total flux cleaned = 0.00450973 Jy
! Component: 650  -  total flux cleaned = 0.00462734 Jy
! Component: 700  -  total flux cleaned = 0.0046273 Jy
! Component: 750  -  total flux cleaned = 0.00469499 Jy
! Component: 800  -  total flux cleaned = 0.00473949 Jy
! Component: 850  -  total flux cleaned = 0.00480514 Jy
! Component: 900  -  total flux cleaned = 0.00484814 Jy
! Component: 950  -  total flux cleaned = 0.00491147 Jy
! Component: 1000  -  total flux cleaned = 0.00497398 Jy
! Component: 1050  -  total flux cleaned = 0.00505564 Jy
! Component: 1100  -  total flux cleaned = 0.00513574 Jy
! Component: 1150  -  total flux cleaned = 0.00513571 Jy
! Component: 1200  -  total flux cleaned = 0.0051359 Jy
! Component: 1250  -  total flux cleaned = 0.00523228 Jy
! Component: 1300  -  total flux cleaned = 0.00521338 Jy
! Component: 1350  -  total flux cleaned = 0.00525048 Jy
! Component: 1400  -  total flux cleaned = 0.00519521 Jy
! Component: 1450  -  total flux cleaned = 0.00523208 Jy
! Component: 1500  -  total flux cleaned = 0.00526767 Jy
! Component: 1550  -  total flux cleaned = 0.00526742 Jy
! Component: 1600  -  total flux cleaned = 0.00523252 Jy
! Component: 1650  -  total flux cleaned = 0.00533613 Jy
! Component: 1700  -  total flux cleaned = 0.00537016 Jy
! Component: 1750  -  total flux cleaned = 0.00533658 Jy
! Component: 1800  -  total flux cleaned = 0.00532006 Jy
! Component: 1850  -  total flux cleaned = 0.00532055 Jy
! Component: 1900  -  total flux cleaned = 0.0053693 Jy
! Component: 1950  -  total flux cleaned = 0.00535323 Jy
! Component: 2000  -  total flux cleaned = 0.00540085 Jy
! Component: 2050  -  total flux cleaned = 0.00541664 Jy
! Component: 2100  -  total flux cleaned = 0.00549424 Jy
! Component: 2150  -  total flux cleaned = 0.0054787 Jy
! Component: 2200  -  total flux cleaned = 0.00550903 Jy
! Component: 2250  -  total flux cleaned = 0.00547908 Jy
! Component: 2300  -  total flux cleaned = 0.00555382 Jy
! Component: 2350  -  total flux cleaned = 0.00556861 Jy
! Component: 2400  -  total flux cleaned = 0.00562706 Jy
! Component: 2450  -  total flux cleaned = 0.00562717 Jy
! Component: 2500  -  total flux cleaned = 0.00559852 Jy
! Component: 2550  -  total flux cleaned = 0.00559865 Jy
! Component: 2600  -  total flux cleaned = 0.00565484 Jy
! Component: 2650  -  total flux cleaned = 0.00561291 Jy
! Component: 2700  -  total flux cleaned = 0.00559904 Jy
! Component: 2750  -  total flux cleaned = 0.00562654 Jy
! Component: 2800  -  total flux cleaned = 0.0056129 Jy
! Component: 2850  -  total flux cleaned = 0.00561298 Jy
! Component: 2900  -  total flux cleaned = 0.00562635 Jy
! Component: 2950  -  total flux cleaned = 0.00561297 Jy
! Component: 3000  -  total flux cleaned = 0.0055867 Jy
! Component: 3050  -  total flux cleaned = 0.00557373 Jy
! Component: 3100  -  total flux cleaned = 0.00557367 Jy
! Component: 3150  -  total flux cleaned = 0.0055992 Jy
! Component: 3200  -  total flux cleaned = 0.00562446 Jy
! Component: 3250  -  total flux cleaned = 0.00561184 Jy
! Component: 3300  -  total flux cleaned = 0.00561191 Jy
! Component: 3350  -  total flux cleaned = 0.00564917 Jy
! Component: 3400  -  total flux cleaned = 0.00563681 Jy
! Component: 3450  -  total flux cleaned = 0.00564908 Jy
! Component: 3500  -  total flux cleaned = 0.00564909 Jy
! Component: 3550  -  total flux cleaned = 0.00568522 Jy
! Component: 3600  -  total flux cleaned = 0.00569732 Jy
! Component: 3650  -  total flux cleaned = 0.00572118 Jy
! Component: 3700  -  total flux cleaned = 0.00578029 Jy
! Component: 3750  -  total flux cleaned = 0.00578015 Jy
! Component: 3800  -  total flux cleaned = 0.00576853 Jy
! Component: 3850  -  total flux cleaned = 0.00574544 Jy
! Component: 3900  -  total flux cleaned = 0.00576842 Jy
! Component: 3950  -  total flux cleaned = 0.00579132 Jy
! Component: 4000  -  total flux cleaned = 0.00573444 Jy
! Component: 4050  -  total flux cleaned = 0.00576826 Jy
! Total flux subtracted in 4096 components = 0.00574571 Jy
! Clean residual min=-0.000643 max=0.000640 Jy/beam
! Clean residual mean=0.000001 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.263098 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 373 components and 0.263098 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J0207+8411_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.41 x 10.26 at -66.49 degrees (North through East)
! Clean map  min=-0.0011466  max=0.25063 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0207+8411_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.250626 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000216524 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.25918 0.25918 0.51836 1.03672 2.07344 4.14688 8.29377 16.5875 33.1751 66.3501
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.25 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1157.49 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0207+8411_S_uvs.log closed on Thu Apr  7 01:09:20 2016