! Started logfile: /scr/pima/bg219b_uvs/J0203+8106_X_uvs.log on Thu Apr  7 01:39:12 2016
obs /scr/pima/bg219b_uvs/J0203+8106_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0203+8106_X_uva.fits
! AN table 1: 50 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.871111 visibilities/baseline/integration-bin.
! Found source: J0203+8106
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23520 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J0203+8106_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.012989Jy  sigma=24.395004
! Fit after  self-cal, rms=0.866731Jy  sigma=20.787163
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6406 mas, bmaj=1.87 mas, bpa=-54.35 degrees
! Estimated noise=0.558638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0932295 Jy
! Component: 100  -  total flux cleaned = 0.123432 Jy
! Total flux subtracted in 100 components = 0.123432 Jy
! Clean residual min=-0.008459 max=0.016890 Jy/beam
! Clean residual mean=0.000084 rms=0.002283 Jy/beam
! Combined flux in latest and established models = 0.123432 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.123432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078663Jy  sigma=1.864726
! Fit after  self-cal, rms=0.078590Jy  sigma=1.862328
! Inverting map 
! Added new window around map position (-2.4, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194499 Jy
! Component: 100  -  total flux cleaned = 0.03317 Jy
! Total flux subtracted in 100 components = 0.03317 Jy
! Clean residual min=-0.006984 max=0.011095 Jy/beam
! Clean residual mean=0.000063 rms=0.001749 Jy/beam
! Combined flux in latest and established models = 0.156602 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.156602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069681Jy  sigma=1.634464
! Fit after  self-cal, rms=0.069526Jy  sigma=1.630460
! Inverting map 
! Added new window around map position (-20.2, -3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120769 Jy
! Component: 100  -  total flux cleaned = 0.0210529 Jy
! Total flux subtracted in 100 components = 0.0210529 Jy
! Clean residual min=-0.005663 max=0.006402 Jy/beam
! Clean residual mean=0.000051 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 0.177655 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.177655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065585Jy  sigma=1.527527
! Fit after  self-cal, rms=0.065505Jy  sigma=1.525053
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8432 mas, bmaj=2.182 mas, bpa=-55.52 degrees
! Estimated noise=0.262756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152309 Jy
! Component: 100  -  total flux cleaned = 0.0262013 Jy
! Component: 150  -  total flux cleaned = 0.0344826 Jy
! Component: 200  -  total flux cleaned = 0.0409387 Jy
! Total flux subtracted in 200 components = 0.0409387 Jy
! Clean residual min=-0.004474 max=0.005957 Jy/beam
! Clean residual mean=0.000042 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.218593 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 64 components and 0.218593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060783Jy  sigma=1.400886
! Fit after  self-cal, rms=0.060539Jy  sigma=1.393845
! Inverting map 
! Added new window around map position (-2.8, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00699 Jy
! Component: 100  -  total flux cleaned = 0.0118866 Jy
! Component: 150  -  total flux cleaned = 0.0157912 Jy
! Component: 200  -  total flux cleaned = 0.0189446 Jy
! Total flux subtracted in 200 components = 0.0189446 Jy
! Clean residual min=-0.002977 max=0.003829 Jy/beam
! Clean residual mean=0.000023 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.237538 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 93 components and 0.237538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059473Jy  sigma=1.365652
! Fit after  self-cal, rms=0.059402Jy  sigma=1.363670
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8432 x 2.182 at -55.52 degrees (North through East)
! Clean map  min=-0.0026743  max=0.13076 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.02     KP        0.92     
!   LA        0.94     MK        1.00     NL        0.98     OV        0.93     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.98     KP        0.95     
!   LA        0.98     MK        1.02     NL        1.04     OV        1.02     
!   PT        1.05     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.02     OV        1.01     
!   PT        1.06     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.98     KP        0.94     
!   LA        0.95     MK        0.97     NL        0.99     OV        0.96     
!   PT        1.02     SC        1.01     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.95     
!   LA        0.97     MK        1.02     NL        1.01     OV        0.97     
!   PT        1.09     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.99     KP        0.97     
!   LA        0.98     MK        1.03     NL        1.04     OV        0.96     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        0.99     KP        0.94     
!   LA        0.96     MK        0.97     NL        0.99     OV        0.97     
!   PT        1.04     SC        0.97     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059402Jy  sigma=1.363670
! Fit after  self-cal, rms=0.058393Jy  sigma=1.347920
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8486 mas, bmaj=2.189 mas, bpa=-55.51 degrees
! Estimated noise=0.259057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-23.6, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349323 Jy
! Component: 100  -  total flux cleaned = 0.00547113 Jy
! Component: 150  -  total flux cleaned = 0.00652457 Jy
! Component: 200  -  total flux cleaned = 0.00716143 Jy
! Total flux subtracted in 200 components = 0.00716143 Jy
! Clean residual min=-0.002278 max=0.002733 Jy/beam
! Clean residual mean=0.000022 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.244699 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 123 components and 0.244699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058135Jy  sigma=1.341115
! Fit after  self-cal, rms=0.058132Jy  sigma=1.340509
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058132Jy  sigma=1.340509
! Fit after  self-cal, rms=0.058031Jy  sigma=1.333331
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8483 mas, bmaj=2.185 mas, bpa=-55.74 degrees
! Estimated noise=0.259176 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110894 Jy
! Component: 100  -  total flux cleaned = 0.00170121 Jy
! Component: 150  -  total flux cleaned = 0.00210498 Jy
! Component: 200  -  total flux cleaned = 0.00227819 Jy
! Total flux subtracted in 200 components = 0.00227819 Jy
! Clean residual min=-0.001715 max=0.001611 Jy/beam
! Clean residual mean=0.000004 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.246977 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 145 components and 0.246977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057960Jy  sigma=1.331440
! Fit after  self-cal, rms=0.057960Jy  sigma=1.331213
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000331512 Jy
! Component: 100  -  total flux cleaned = 0.000545929 Jy
! Component: 150  -  total flux cleaned = 0.000573466 Jy
! Component: 200  -  total flux cleaned = 0.000549656 Jy
! Total flux subtracted in 200 components = 0.000549656 Jy
! Clean residual min=-0.001625 max=0.001502 Jy/beam
! Clean residual mean=0.000003 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.247527 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 156 components and 0.247527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057933Jy  sigma=1.330533
! Fit after  self-cal, rms=0.057930Jy  sigma=1.330477
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057930Jy  sigma=1.330477
! Fit after  self-cal, rms=0.057956Jy  sigma=1.330248
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8486 mas, bmaj=2.185 mas, bpa=-55.82 degrees
! Estimated noise=0.258988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.88388e-05 Jy
! Component: 100  -  total flux cleaned = 0.000177403 Jy
! Component: 150  -  total flux cleaned = 0.000176487 Jy
! Component: 200  -  total flux cleaned = 0.00015524 Jy
! Total flux subtracted in 200 components = 0.00015524 Jy
! Clean residual min=-0.001595 max=0.001472 Jy/beam
! Clean residual mean=0.000003 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.247682 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 168 components and 0.247682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057933Jy  sigma=1.329678
! Fit after  self-cal, rms=0.057932Jy  sigma=1.329616
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.93979e-05 Jy
! Component: 100  -  total flux cleaned = 0.000108814 Jy
! Component: 150  -  total flux cleaned = 0.000143911 Jy
! Component: 200  -  total flux cleaned = 0.000143408 Jy
! Total flux subtracted in 200 components = 0.000143408 Jy
! Clean residual min=-0.001529 max=0.001447 Jy/beam
! Clean residual mean=0.000003 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.247826 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 181 components and 0.247826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057920Jy  sigma=1.329335
! Fit after  self-cal, rms=0.057918Jy  sigma=1.329310
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057918Jy  sigma=1.329310
! Fit after  self-cal, rms=0.057905Jy  sigma=1.329220
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.095 mas, bmaj=3.343 mas, bpa=-60.48 degrees
! Estimated noise=0.329276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104062 Jy
! Component: 100  -  total flux cleaned = 0.000118683 Jy
! Component: 150  -  total flux cleaned = 0.000225951 Jy
! Component: 200  -  total flux cleaned = 0.00032168 Jy
! Total flux subtracted in 200 components = 0.00032168 Jy
! Clean residual min=-0.002160 max=0.001844 Jy/beam
! Clean residual mean=0.000005 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.248147 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 195 components and 0.248147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057894Jy  sigma=1.328989
! Fit after  self-cal, rms=0.057893Jy  sigma=1.328930
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.84818e-05 Jy
! Component: 100  -  total flux cleaned = 2.95941e-05 Jy
! Component: 150  -  total flux cleaned = 6.21257e-05 Jy
! Component: 200  -  total flux cleaned = 0.00010745 Jy
! Total flux subtracted in 200 components = 0.00010745 Jy
! Clean residual min=-0.002123 max=0.001800 Jy/beam
! Clean residual mean=0.000005 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.248255 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 209 components and 0.248255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057890Jy  sigma=1.328864
! Fit after  self-cal, rms=0.057889Jy  sigma=1.328842
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8488 mas, bmaj=2.185 mas, bpa=-55.85 degrees
! Estimated noise=0.258728 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8488 x 2.185 at -55.85 degrees (North through East)
! Clean map  min=-0.0013246  max=0.12935 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6448 mas, bmaj=1.873 mas, bpa=-54.6 degrees
! Estimated noise=0.551124 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0916263 Jy
! Component: 100  -  total flux cleaned = 0.122658 Jy
! Component: 150  -  total flux cleaned = 0.142805 Jy
! Component: 200  -  total flux cleaned = 0.157521 Jy
! Total flux subtracted in 200 components = 0.157521 Jy
! Clean residual min=-0.005790 max=0.008437 Jy/beam
! Clean residual mean=0.000056 rms=0.001580 Jy/beam
! Combined flux in latest and established models = 0.157521 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.157521 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8488 mas, bmaj=2.185 mas, bpa=-55.85 degrees
! Estimated noise=0.258728 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210035 Jy
! Component: 100  -  total flux cleaned = 0.035958 Jy
! Component: 150  -  total flux cleaned = 0.0469749 Jy
! Component: 200  -  total flux cleaned = 0.0553406 Jy
! Total flux subtracted in 200 components = 0.0553406 Jy
! Clean residual min=-0.003066 max=0.005000 Jy/beam
! Clean residual mean=0.000037 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.212862 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 53 components and 0.212862 Jy
! Inverting map 
! Added new window around map position (-1.6, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00655406 Jy
! Component: 100  -  total flux cleaned = 0.0117809 Jy
! Component: 150  -  total flux cleaned = 0.0160364 Jy
! Component: 200  -  total flux cleaned = 0.0195324 Jy
! Total flux subtracted in 200 components = 0.0195324 Jy
! Clean residual min=-0.002172 max=0.002482 Jy/beam
! Clean residual mean=0.000017 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.232394 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 90 components and 0.232394 Jy
! Inverting map 
! Added new window around map position (30, -26.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00295563 Jy
! Component: 100  -  total flux cleaned = 0.005393 Jy
! Component: 150  -  total flux cleaned = 0.00744828 Jy
! Component: 200  -  total flux cleaned = 0.00918681 Jy
! Total flux subtracted in 200 components = 0.00918681 Jy
! Clean residual min=-0.001743 max=0.001552 Jy/beam
! Clean residual mean=0.000009 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.241581 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 119 components and 0.241581 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.095 mas, bmaj=3.343 mas, bpa=-60.48 degrees
! Estimated noise=0.329276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257562 Jy
! Component: 100  -  total flux cleaned = 0.00429628 Jy
! Component: 150  -  total flux cleaned = 0.00552987 Jy
! Component: 200  -  total flux cleaned = 0.00606542 Jy
! Total flux subtracted in 200 components = 0.00606542 Jy
! Clean residual min=-0.001979 max=0.001963 Jy/beam
! Clean residual mean=0.000006 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.247646 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019219 Jy
! Component: 100  -  total flux cleaned = 0.000306452 Jy
! Component: 150  -  total flux cleaned = 0.00040817 Jy
! Component: 200  -  total flux cleaned = 0.000477265 Jy
! Total flux subtracted in 200 components = 0.000477265 Jy
! Clean residual min=-0.001917 max=0.001849 Jy/beam
! Clean residual mean=0.000004 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.248124 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 185 components and 0.248124 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8488 mas, bmaj=2.185 mas, bpa=-55.85 degrees
! Estimated noise=0.258728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.98768e-05 Jy
! Component: 100  -  total flux cleaned = -4.13564e-05 Jy
! Component: 150  -  total flux cleaned = 6.54008e-05 Jy
! Component: 200  -  total flux cleaned = 0.000114746 Jy
! Total flux subtracted in 200 components = 0.000114746 Jy
! Clean residual min=-0.001408 max=0.001407 Jy/beam
! Clean residual mean=0.000002 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.248238 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 211 components and 0.248238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057885Jy  sigma=1.328740
! Fit after  self-cal, rms=0.057877Jy  sigma=1.328520
wmodel /scr/pima/bg219b_uvs/J0203+8106_X_map.mod
! Writing 211 model components to file: /scr/pima/bg219b_uvs/J0203+8106_X_map.mod
wobs /scr/pima/bg219b_uvs/J0203+8106_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J0203+8106_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J0203+8106_X_map.win
! wwins: Wrote 7 windows to /scr/pima/bg219b_uvs/J0203+8106_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159607 Jy
! Component: 100  -  total flux cleaned = 8.85438e-05 Jy
! Component: 150  -  total flux cleaned = 2.16995e-05 Jy
! Component: 200  -  total flux cleaned = -4.26102e-05 Jy
! Component: 250  -  total flux cleaned = -0.000104671 Jy
! Component: 300  -  total flux cleaned = -0.000144504 Jy
! Component: 350  -  total flux cleaned = -0.000105749 Jy
! Component: 400  -  total flux cleaned = -4.92827e-05 Jy
! Component: 450  -  total flux cleaned = 5.78599e-06 Jy
! Component: 500  -  total flux cleaned = 4.16017e-05 Jy
! Component: 550  -  total flux cleaned = 7.70114e-05 Jy
! Component: 600  -  total flux cleaned = 0.000112076 Jy
! Component: 650  -  total flux cleaned = 0.000197517 Jy
! Component: 700  -  total flux cleaned = 0.000247788 Jy
! Component: 750  -  total flux cleaned = 0.000313785 Jy
! Component: 800  -  total flux cleaned = 0.000394592 Jy
! Component: 850  -  total flux cleaned = 0.000410459 Jy
! Component: 900  -  total flux cleaned = 0.000473148 Jy
! Component: 950  -  total flux cleaned = 0.000473073 Jy
! Component: 1000  -  total flux cleaned = 0.000473645 Jy
! Component: 1050  -  total flux cleaned = 0.000578535 Jy
! Component: 1100  -  total flux cleaned = 0.000637207 Jy
! Component: 1150  -  total flux cleaned = 0.000680776 Jy
! Component: 1200  -  total flux cleaned = 0.000709441 Jy
! Component: 1250  -  total flux cleaned = 0.000738086 Jy
! Component: 1300  -  total flux cleaned = 0.000766392 Jy
! Component: 1350  -  total flux cleaned = 0.0007943 Jy
! Component: 1400  -  total flux cleaned = 0.00079428 Jy
! Component: 1450  -  total flux cleaned = 0.000780474 Jy
! Component: 1500  -  total flux cleaned = 0.000807109 Jy
! Component: 1550  -  total flux cleaned = 0.000806966 Jy
! Component: 1600  -  total flux cleaned = 0.000793898 Jy
! Component: 1650  -  total flux cleaned = 0.000820225 Jy
! Component: 1700  -  total flux cleaned = 0.000820086 Jy
! Component: 1750  -  total flux cleaned = 0.000832753 Jy
! Component: 1800  -  total flux cleaned = 0.000832826 Jy
! Component: 1850  -  total flux cleaned = 0.000845298 Jy
! Component: 1900  -  total flux cleaned = 0.000857596 Jy
! Component: 1950  -  total flux cleaned = 0.000869854 Jy
! Component: 2000  -  total flux cleaned = 0.000845312 Jy
! Component: 2050  -  total flux cleaned = 0.000869531 Jy
! Component: 2100  -  total flux cleaned = 0.000893629 Jy
! Component: 2150  -  total flux cleaned = 0.00089358 Jy
! Component: 2200  -  total flux cleaned = 0.000928924 Jy
! Component: 2250  -  total flux cleaned = 0.000928954 Jy
! Component: 2300  -  total flux cleaned = 0.000917424 Jy
! Component: 2350  -  total flux cleaned = 0.000974855 Jy
! Component: 2400  -  total flux cleaned = 0.000974787 Jy
! Component: 2450  -  total flux cleaned = 0.000963422 Jy
! Component: 2500  -  total flux cleaned = 0.00096352 Jy
! Component: 2550  -  total flux cleaned = 0.00093008 Jy
! Component: 2600  -  total flux cleaned = 0.000996689 Jy
! Component: 2650  -  total flux cleaned = 0.000952658 Jy
! Component: 2700  -  total flux cleaned = 0.000996395 Jy
! Component: 2750  -  total flux cleaned = 0.000974692 Jy
! Component: 2800  -  total flux cleaned = 0.00097469 Jy
! Component: 2850  -  total flux cleaned = 0.000996078 Jy
! Component: 2900  -  total flux cleaned = 0.00101733 Jy
! Component: 2950  -  total flux cleaned = 0.000975275 Jy
! Component: 3000  -  total flux cleaned = 0.00102765 Jy
! Component: 3050  -  total flux cleaned = 0.00104847 Jy
! Component: 3100  -  total flux cleaned = 0.00106904 Jy
! Component: 3150  -  total flux cleaned = 0.00107934 Jy
! Component: 3200  -  total flux cleaned = 0.00108943 Jy
! Component: 3250  -  total flux cleaned = 0.00105906 Jy
! Component: 3300  -  total flux cleaned = 0.00108919 Jy
! Component: 3350  -  total flux cleaned = 0.00109916 Jy
! Component: 3400  -  total flux cleaned = 0.00111902 Jy
! Component: 3450  -  total flux cleaned = 0.00113881 Jy
! Component: 3500  -  total flux cleaned = 0.00112895 Jy
! Component: 3550  -  total flux cleaned = 0.00116807 Jy
! Component: 3600  -  total flux cleaned = 0.00117772 Jy
! Component: 3650  -  total flux cleaned = 0.00115847 Jy
! Component: 3700  -  total flux cleaned = 0.00119668 Jy
! Component: 3750  -  total flux cleaned = 0.00119676 Jy
! Component: 3800  -  total flux cleaned = 0.00119682 Jy
! Component: 3850  -  total flux cleaned = 0.00120627 Jy
! Component: 3900  -  total flux cleaned = 0.00120634 Jy
! Component: 3950  -  total flux cleaned = 0.00123418 Jy
! Component: 4000  -  total flux cleaned = 0.00123415 Jy
! Component: 4050  -  total flux cleaned = 0.00123409 Jy
! Total flux subtracted in 4096 components = 0.00123414 Jy
! Clean residual min=-0.000616 max=0.000529 Jy/beam
! Clean residual mean=0.000001 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.249472 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 504 components and 0.249472 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J0203+8106_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8488 x 2.185 at -55.85 degrees (North through East)
! Clean map  min=-0.0007718  max=0.12909 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0203+8106_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.129085 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000154927 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.360058 0.360058 0.720116 1.44023 2.88047 5.76093 11.5219 23.0437 46.0874 92.1749
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.129 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  833.198 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0203+8106_X_uvs.log closed on Thu Apr  7 01:39:17 2016