! Started logfile: /scr/pima/bg219b_uvs/J0203+8106_X_dfm.log on Thu May 19 19:56:05 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0203+8106_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0203+8106_X_uva.fits
! AN table 1: 50 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.871111 visibilities/baseline/integration-bin.
! Found source: J0203+8106
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0203+8106_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012781Jy  sigma=23.449515
! Fit after  self-cal, rms=0.862942Jy  sigma=19.910597
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6168 mas, bmaj=1.813 mas, bpa=-53.96 degrees
! Estimated noise=0.483509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0937012 Jy
! Component: 100  -  total flux cleaned = 0.124692 Jy
! Total flux subtracted in 100 components = 0.124692 Jy
! Clean residual min=-0.008123 max=0.017854 Jy/beam
! Clean residual mean=0.000070 rms=0.002083 Jy/beam
! Combined flux in latest and established models = 0.124692 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.124692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084271Jy  sigma=1.897799
! Fit after  self-cal, rms=0.084206Jy  sigma=1.895644
! Inverting map 
! Added new window around map position (-2.4, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202756 Jy
! Component: 100  -  total flux cleaned = 0.0340641 Jy
! Total flux subtracted in 100 components = 0.0340641 Jy
! Clean residual min=-0.006114 max=0.011233 Jy/beam
! Clean residual mean=0.000053 rms=0.001575 Jy/beam
! Combined flux in latest and established models = 0.158756 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.158756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075010Jy  sigma=1.667980
! Fit after  self-cal, rms=0.074871Jy  sigma=1.664331
! Inverting map 
! Added new window around map position (-20.2, -3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118491 Jy
! Component: 100  -  total flux cleaned = 0.0207487 Jy
! Total flux subtracted in 100 components = 0.0207487 Jy
! Clean residual min=-0.005152 max=0.007324 Jy/beam
! Clean residual mean=0.000043 rms=0.001310 Jy/beam
! Combined flux in latest and established models = 0.179505 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 24 components and 0.179505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071044Jy  sigma=1.567722
! Fit after  self-cal, rms=0.070970Jy  sigma=1.565524
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8366 mas, bmaj=2.166 mas, bpa=-55.54 degrees
! Estimated noise=0.209128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161856 Jy
! Component: 100  -  total flux cleaned = 0.0279257 Jy
! Component: 150  -  total flux cleaned = 0.0367693 Jy
! Component: 200  -  total flux cleaned = 0.0436869 Jy
! Total flux subtracted in 200 components = 0.0436869 Jy
! Clean residual min=-0.004328 max=0.006349 Jy/beam
! Clean residual mean=0.000046 rms=0.001250 Jy/beam
! Combined flux in latest and established models = 0.223192 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 59 components and 0.223192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065987Jy  sigma=1.439684
! Fit after  self-cal, rms=0.065750Jy  sigma=1.433041
! Inverting map 
! Added new window around map position (-2.8, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00733059 Jy
! Component: 100  -  total flux cleaned = 0.0125407 Jy
! Component: 150  -  total flux cleaned = 0.0166918 Jy
! Component: 200  -  total flux cleaned = 0.020029 Jy
! Total flux subtracted in 200 components = 0.020029 Jy
! Clean residual min=-0.003267 max=0.003961 Jy/beam
! Clean residual mean=0.000026 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.243221 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 90 components and 0.243221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064649Jy  sigma=1.405176
! Fit after  self-cal, rms=0.064582Jy  sigma=1.403343
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8366 x 2.166 at -55.54 degrees (North through East)
! Clean map  min=-0.0028664  max=0.13481 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.04     KP        0.93     
!   LA        0.95     MK        1.01     NL        1.00     OV        0.94     
!   PT        1.05     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.00     KP        0.96     
!   LA        0.99     MK        1.02     NL        1.05     OV        1.03     
!   PT        1.08     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.05     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.03     OV        1.02     
!   PT        1.09     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.00     KP        0.95     
!   LA        0.96     MK        0.98     NL        1.01     OV        0.97     
!   PT        1.04     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.93     
!   LA        0.94     MK        0.99     NL        0.98     OV        0.97     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.97     
!   LA        0.98     MK        1.03     NL        1.03     OV        0.98     
!   PT        1.11     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.01     KP        0.99     
!   LA        0.99     MK        1.04     NL        1.05     OV        0.97     
!   PT        1.07     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.01     KP        0.95     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.06     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        0.94     
!   LA        0.94     MK        1.03     NL        1.02     OV        0.99     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.96     KP        0.91     
!   LA        0.95     MK        1.01     NL        0.97     OV        0.95     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.97     KP        0.93     
!   LA        0.95     MK        1.00     NL        0.97     OV        0.97     
!   PT        1.02     SC        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        0.88     KP        0.90     
!   LA        0.95     MK        0.95     NL        0.97     OV        0.93     
!   PT        0.96     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.064582Jy  sigma=1.403343
! Fit after  self-cal, rms=0.062489Jy  sigma=1.382678
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8417 mas, bmaj=2.173 mas, bpa=-55.55 degrees
! Estimated noise=0.205869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18.4, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347251 Jy
! Component: 100  -  total flux cleaned = 0.00572287 Jy
! Component: 150  -  total flux cleaned = 0.00672107 Jy
! Component: 200  -  total flux cleaned = 0.0073938 Jy
! Total flux subtracted in 200 components = 0.0073938 Jy
! Clean residual min=-0.002230 max=0.002261 Jy/beam
! Clean residual mean=0.000019 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.250615 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 129 components and 0.250615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062254Jy  sigma=1.376454
! Fit after  self-cal, rms=0.062255Jy  sigma=1.376140
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062255Jy  sigma=1.376140
! Fit after  self-cal, rms=0.062226Jy  sigma=1.368679
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.841 mas, bmaj=2.169 mas, bpa=-55.69 degrees
! Estimated noise=0.20621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000774602 Jy
! Component: 100  -  total flux cleaned = 0.00134391 Jy
! Component: 150  -  total flux cleaned = 0.00160112 Jy
! Component: 200  -  total flux cleaned = 0.00171088 Jy
! Total flux subtracted in 200 components = 0.00171088 Jy
! Clean residual min=-0.001622 max=0.001731 Jy/beam
! Clean residual mean=0.000003 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.252326 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 156 components and 0.252326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062155Jy  sigma=1.366883
! Fit after  self-cal, rms=0.062157Jy  sigma=1.366662
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-23, -7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173267 Jy
! Component: 100  -  total flux cleaned = 0.00211763 Jy
! Component: 150  -  total flux cleaned = 0.00235042 Jy
! Component: 200  -  total flux cleaned = 0.00246569 Jy
! Total flux subtracted in 200 components = 0.00246569 Jy
! Clean residual min=-0.001440 max=0.001413 Jy/beam
! Clean residual mean=0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.254791 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 178 components and 0.254791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062098Jy  sigma=1.365234
! Fit after  self-cal, rms=0.062093Jy  sigma=1.365116
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062093Jy  sigma=1.365116
! Fit after  self-cal, rms=0.062027Jy  sigma=1.364894
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.841 mas, bmaj=2.169 mas, bpa=-55.69 degrees
! Estimated noise=0.205954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144475 Jy
! Component: 100  -  total flux cleaned = 0.000296464 Jy
! Component: 150  -  total flux cleaned = 0.000270301 Jy
! Component: 200  -  total flux cleaned = 0.000339372 Jy
! Total flux subtracted in 200 components = 0.000339372 Jy
! Clean residual min=-0.001261 max=0.001380 Jy/beam
! Clean residual mean=0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.255131 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 192 components and 0.255131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062002Jy  sigma=1.364326
! Fit after  self-cal, rms=0.062002Jy  sigma=1.364281
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.2, 38.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014157 Jy
! Component: 100  -  total flux cleaned = 0.00225256 Jy
! Component: 150  -  total flux cleaned = 0.00256925 Jy
! Component: 200  -  total flux cleaned = 0.00284952 Jy
! Total flux subtracted in 200 components = 0.00284952 Jy
! Clean residual min=-0.001347 max=0.001346 Jy/beam
! Clean residual mean=0.000000 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.25798 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 211 components and 0.25798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061961Jy  sigma=1.363399
! Fit after  self-cal, rms=0.061958Jy  sigma=1.363334
! Inverting map 
! Added new window around map position (-46, 37.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011951 Jy
! Component: 100  -  total flux cleaned = 0.00173462 Jy
! Component: 150  -  total flux cleaned = 0.00212569 Jy
! Component: 200  -  total flux cleaned = 0.00243473 Jy
! Total flux subtracted in 200 components = 0.00243473 Jy
! Clean residual min=-0.001366 max=0.001089 Jy/beam
! Clean residual mean=-0.000001 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.260415 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 232 components and 0.260415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061926Jy  sigma=1.362557
! Fit after  self-cal, rms=0.061924Jy  sigma=1.362506
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061924Jy  sigma=1.362506
! Fit after  self-cal, rms=0.061824Jy  sigma=1.362385
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.097 mas, bmaj=3.339 mas, bpa=-60.5 degrees
! Estimated noise=0.261668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000710728 Jy
! Component: 100  -  total flux cleaned = 0.00113269 Jy
! Component: 150  -  total flux cleaned = 0.00136998 Jy
! Component: 200  -  total flux cleaned = 0.00160435 Jy
! Total flux subtracted in 200 components = 0.00160435 Jy
! Clean residual min=-0.001188 max=0.001144 Jy/beam
! Clean residual mean=-0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.262019 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 267 components and 0.262019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061812Jy  sigma=1.362113
! Fit after  self-cal, rms=0.061812Jy  sigma=1.362083
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000373164 Jy
! Component: 100  -  total flux cleaned = 0.000651598 Jy
! Component: 150  -  total flux cleaned = 0.000842795 Jy
! Component: 200  -  total flux cleaned = 0.000965703 Jy
! Total flux subtracted in 200 components = 0.000965703 Jy
! Clean residual min=-0.001131 max=0.001100 Jy/beam
! Clean residual mean=-0.000003 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.262985 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 286 components and 0.262985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061808Jy  sigma=1.361985
! Fit after  self-cal, rms=0.061807Jy  sigma=1.361970
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8414 mas, bmaj=2.17 mas, bpa=-55.69 degrees
! Estimated noise=0.205649 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8414 x 2.17 at -55.69 degrees (North through East)
! Clean map  min=-0.0011959  max=0.13336 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.621 mas, bmaj=1.817 mas, bpa=-54.06 degrees
! Estimated noise=0.477244 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0921202 Jy
! Component: 100  -  total flux cleaned = 0.123845 Jy
! Component: 150  -  total flux cleaned = 0.144388 Jy
! Component: 200  -  total flux cleaned = 0.159212 Jy
! Total flux subtracted in 200 components = 0.159212 Jy
! Clean residual min=-0.005585 max=0.008520 Jy/beam
! Clean residual mean=0.000047 rms=0.001421 Jy/beam
! Combined flux in latest and established models = 0.159212 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.159212 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8414 mas, bmaj=2.17 mas, bpa=-55.69 degrees
! Estimated noise=0.205649 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220588 Jy
! Component: 100  -  total flux cleaned = 0.0377386 Jy
! Component: 150  -  total flux cleaned = 0.0492484 Jy
! Component: 200  -  total flux cleaned = 0.0580291 Jy
! Total flux subtracted in 200 components = 0.0580291 Jy
! Clean residual min=-0.002977 max=0.005272 Jy/beam
! Clean residual mean=0.000040 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 0.217241 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 59 components and 0.217241 Jy
! Inverting map 
! Added new window around map position (-1.6, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00695142 Jy
! Component: 100  -  total flux cleaned = 0.0124841 Jy
! Component: 150  -  total flux cleaned = 0.0169597 Jy
! Component: 200  -  total flux cleaned = 0.0206232 Jy
! Total flux subtracted in 200 components = 0.0206232 Jy
! Clean residual min=-0.001944 max=0.002339 Jy/beam
! Clean residual mean=0.000018 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.237864 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 94 components and 0.237864 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.097 mas, bmaj=3.339 mas, bpa=-60.5 degrees
! Estimated noise=0.261668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00546703 Jy
! Component: 100  -  total flux cleaned = 0.0090777 Jy
! Component: 150  -  total flux cleaned = 0.0118431 Jy
! Component: 200  -  total flux cleaned = 0.0140398 Jy
! Total flux subtracted in 200 components = 0.0140398 Jy
! Clean residual min=-0.001705 max=0.001801 Jy/beam
! Clean residual mean=0.000013 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.251904 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179664 Jy
! Component: 100  -  total flux cleaned = 0.00330947 Jy
! Component: 150  -  total flux cleaned = 0.00460119 Jy
! Component: 200  -  total flux cleaned = 0.00571884 Jy
! Total flux subtracted in 200 components = 0.00571884 Jy
! Clean residual min=-0.001355 max=0.001248 Jy/beam
! Clean residual mean=0.000005 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.257623 Jy
! Adding 107 model components to the UV plane model.
! The established model now contains 187 components and 0.257622 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8414 mas, bmaj=2.17 mas, bpa=-55.69 degrees
! Estimated noise=0.205649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117823 Jy
! Component: 100  -  total flux cleaned = 0.00193487 Jy
! Component: 150  -  total flux cleaned = 0.00246821 Jy
! Component: 200  -  total flux cleaned = 0.00299421 Jy
! Total flux subtracted in 200 components = 0.00299421 Jy
! Clean residual min=-0.001314 max=0.001119 Jy/beam
! Clean residual mean=-0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.260617 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 220 components and 0.260617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061866Jy  sigma=1.363334
! Fit after  self-cal, rms=0.061855Jy  sigma=1.363073
wmodel /J0203+8106_X_map.mod
! wmodel: Unable to open new model file: /J0203+8106_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0203+8106_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8414 x 2.17 at -55.69 degrees (North through East)
! Clean map  min=-0.0011998  max=0.13327 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0203+8106_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133269 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000269296 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.606208 0.606208 1.21242 2.42483 4.84966 9.69932 19.3986 38.7973 77.5946
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  494.879 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0203+8106_X_dfm.log closed on Thu May 19 19:56:09 2016