! Started logfile: /scr/pima/bg219b_uvs/J0112+3208_X_dfm.log on Thu May 19 19:55:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0112+3208_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0112+3208_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.901852 visibilities/baseline/integration-bin.
! Found source: J0112+3208
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17532 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0112+3208_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.052880Jy  sigma=23.983363
! Fit after  self-cal, rms=0.709124Jy  sigma=16.061938
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7658 mas, bmaj=1.315 mas, bpa=-3.397 degrees
! Estimated noise=0.457834 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.220854 Jy
! Component: 100  -  total flux cleaned = 0.271515 Jy
! Total flux subtracted in 100 components = 0.271515 Jy
! Clean residual min=-0.010318 max=0.018523 Jy/beam
! Clean residual mean=0.000016 rms=0.002264 Jy/beam
! Combined flux in latest and established models = 0.271515 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.271515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084592Jy  sigma=1.839973
! Fit after  self-cal, rms=0.084582Jy  sigma=1.839755
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204049 Jy
! Component: 100  -  total flux cleaned = 0.0312802 Jy
! Total flux subtracted in 100 components = 0.0312802 Jy
! Clean residual min=-0.007988 max=0.011088 Jy/beam
! Clean residual mean=0.000008 rms=0.001777 Jy/beam
! Combined flux in latest and established models = 0.302795 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.302795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077487Jy  sigma=1.647830
! Fit after  self-cal, rms=0.077477Jy  sigma=1.647490
! Inverting map 
! Added new window around map position (-2.8, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102283 Jy
! Component: 100  -  total flux cleaned = 0.0163519 Jy
! Total flux subtracted in 100 components = 0.0163519 Jy
! Clean residual min=-0.007607 max=0.007730 Jy/beam
! Clean residual mean=0.000006 rms=0.001601 Jy/beam
! Combined flux in latest and established models = 0.319147 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 27 components and 0.319147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075590Jy  sigma=1.596238
! Fit after  self-cal, rms=0.075518Jy  sigma=1.593918
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9721 mas, bmaj=1.618 mas, bpa=0.2162 degrees
! Estimated noise=0.257378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119259 Jy
! Component: 100  -  total flux cleaned = 0.0186832 Jy
! Component: 150  -  total flux cleaned = 0.0224221 Jy
! Component: 200  -  total flux cleaned = 0.0247554 Jy
! Total flux subtracted in 200 components = 0.0247554 Jy
! Clean residual min=-0.008297 max=0.008173 Jy/beam
! Clean residual mean=-0.000003 rms=0.001885 Jy/beam
! Combined flux in latest and established models = 0.343902 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 61 components and 0.343903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073582Jy  sigma=1.539282
! Fit after  self-cal, rms=0.073434Jy  sigma=1.534986
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9721 x 1.618 at 0.2162 degrees (North through East)
! Clean map  min=-0.0076763  max=0.29161 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.05     KP        0.93     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.99     
!   PT        1.09     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.06     KP        0.98     
!   LA        0.98     MK        1.02     NL        1.01     OV        1.04     
!   PT        1.11     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.10     KP        0.98     
!   LA        0.99     MK        1.03     NL        1.04     OV        1.03     
!   PT        1.12     SC        1.10     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.03     KP        0.95     
!   LA        0.97     MK        1.00     NL        0.98     OV        0.99     
!   PT        1.08     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.02     KP        0.94     
!   LA        0.93     MK        0.97     NL        1.00     OV        1.00     
!   PT        1.08     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        0.96     
!   LA        0.96     MK        1.01     NL        1.03     OV        0.98     
!   PT        1.10     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.03     KP        0.98     
!   LA        0.97     MK        1.04     NL        1.03     OV        1.02     
!   PT        1.09     SC        1.09     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.05     KP        0.96     
!   LA        0.94     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.08     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.00     KP        0.94     
!   LA        0.94     MK        1.01     NL        1.00     OV        1.00     
!   PT        1.06     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        1.00     KP        0.93     
!   LA        0.93     MK        0.97     NL        0.95     OV        0.96     
!   PT        1.04     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        1.04     KP        0.91     
!   LA        0.91     MK        0.99     NL        0.97     OV        0.96     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.92     HN        0.96     KP        0.91     
!   LA        0.94     MK        0.94     NL        0.92     OV        0.91     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.073434Jy  sigma=1.534986
! Fit after  self-cal, rms=0.069500Jy  sigma=1.440361
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9824 mas, bmaj=1.632 mas, bpa=-0.2011 degrees
! Estimated noise=0.256084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119196 Jy
! Component: 100  -  total flux cleaned = 0.00150291 Jy
! Component: 150  -  total flux cleaned = 0.0014239 Jy
! Component: 200  -  total flux cleaned = 0.00129782 Jy
! Total flux subtracted in 200 components = 0.00129782 Jy
! Clean residual min=-0.005469 max=0.005321 Jy/beam
! Clean residual mean=-0.000009 rms=0.001403 Jy/beam
! Combined flux in latest and established models = 0.3452 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 81 components and 0.3452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069220Jy  sigma=1.434201
! Fit after  self-cal, rms=0.069234Jy  sigma=1.433412
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069234Jy  sigma=1.433412
! Fit after  self-cal, rms=0.067710Jy  sigma=1.365630
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9817 mas, bmaj=1.633 mas, bpa=-0.1102 degrees
! Estimated noise=0.256349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186633 Jy
! Component: 100  -  total flux cleaned = 0.00232217 Jy
! Component: 150  -  total flux cleaned = 0.0024848 Jy
! Component: 200  -  total flux cleaned = 0.0024826 Jy
! Total flux subtracted in 200 components = 0.0024826 Jy
! Clean residual min=-0.002168 max=0.002416 Jy/beam
! Clean residual mean=-0.000002 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.347683 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 91 components and 0.347683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067558Jy  sigma=1.360514
! Fit after  self-cal, rms=0.067594Jy  sigma=1.360082
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.6, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186414 Jy
! Component: 100  -  total flux cleaned = 0.0021788 Jy
! Component: 150  -  total flux cleaned = 0.00247074 Jy
! Component: 200  -  total flux cleaned = 0.00269399 Jy
! Total flux subtracted in 200 components = 0.00269399 Jy
! Clean residual min=-0.002096 max=0.001913 Jy/beam
! Clean residual mean=-0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.350377 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 112 components and 0.350377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067510Jy  sigma=1.357947
! Fit after  self-cal, rms=0.067508Jy  sigma=1.357859
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067508Jy  sigma=1.357859
! Fit after  self-cal, rms=0.067654Jy  sigma=1.356905
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9822 mas, bmaj=1.635 mas, bpa=-0.04907 degrees
! Estimated noise=0.256167 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00092969 Jy
! Component: 100  -  total flux cleaned = 0.00113103 Jy
! Component: 150  -  total flux cleaned = 0.00116505 Jy
! Component: 200  -  total flux cleaned = 0.0011952 Jy
! Total flux subtracted in 200 components = 0.0011952 Jy
! Clean residual min=-0.001721 max=0.001859 Jy/beam
! Clean residual mean=-0.000003 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.351572 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 122 components and 0.351572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067612Jy  sigma=1.355780
! Fit after  self-cal, rms=0.067615Jy  sigma=1.355741
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13.8, -44.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176499 Jy
! Component: 100  -  total flux cleaned = 0.00258878 Jy
! Component: 150  -  total flux cleaned = 0.00303312 Jy
! Component: 200  -  total flux cleaned = 0.00330348 Jy
! Total flux subtracted in 200 components = 0.00330348 Jy
! Clean residual min=-0.001619 max=0.001550 Jy/beam
! Clean residual mean=-0.000002 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.354876 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 135 components and 0.354876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067553Jy  sigma=1.354371
! Fit after  self-cal, rms=0.067550Jy  sigma=1.354310
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067550Jy  sigma=1.354310
! Fit after  self-cal, rms=0.067560Jy  sigma=1.354098
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.129 mas, bmaj=2.751 mas, bpa=0.8521 degrees
! Estimated noise=0.312246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000350616 Jy
! Component: 100  -  total flux cleaned = 0.000505463 Jy
! Component: 150  -  total flux cleaned = 0.000603114 Jy
! Component: 200  -  total flux cleaned = 0.000687652 Jy
! Total flux subtracted in 200 components = 0.000687652 Jy
! Clean residual min=-0.001866 max=0.002088 Jy/beam
! Clean residual mean=-0.000004 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.355563 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 152 components and 0.355563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067543Jy  sigma=1.353739
! Fit after  self-cal, rms=0.067540Jy  sigma=1.353713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.0509e-05 Jy
! Component: 100  -  total flux cleaned = 0.000182972 Jy
! Component: 150  -  total flux cleaned = 0.000288315 Jy
! Component: 200  -  total flux cleaned = 0.000403199 Jy
! Total flux subtracted in 200 components = 0.000403199 Jy
! Clean residual min=-0.001838 max=0.002048 Jy/beam
! Clean residual mean=-0.000004 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.355966 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 164 components and 0.355966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067533Jy  sigma=1.353577
! Fit after  self-cal, rms=0.067533Jy  sigma=1.353566
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9824 mas, bmaj=1.635 mas, bpa=-0.002469 degrees
! Estimated noise=0.256075 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9824 x 1.635 at -0.002469 degrees (North through East)
! Clean map  min=-0.0018143  max=0.28982 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7703 mas, bmaj=1.326 mas, bpa=-3.917 degrees
! Estimated noise=0.458883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221199 Jy
! Component: 100  -  total flux cleaned = 0.271444 Jy
! Component: 150  -  total flux cleaned = 0.29168 Jy
! Component: 200  -  total flux cleaned = 0.304734 Jy
! Total flux subtracted in 200 components = 0.304734 Jy
! Clean residual min=-0.004431 max=0.007224 Jy/beam
! Clean residual mean=0.000007 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 0.304734 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.304734 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9824 mas, bmaj=1.635 mas, bpa=-0.002469 degrees
! Estimated noise=0.256075 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150516 Jy
! Component: 100  -  total flux cleaned = 0.0241819 Jy
! Component: 150  -  total flux cleaned = 0.0300195 Jy
! Component: 200  -  total flux cleaned = 0.0340639 Jy
! Total flux subtracted in 200 components = 0.0340639 Jy
! Clean residual min=-0.002314 max=0.002566 Jy/beam
! Clean residual mean=-0.000001 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.338798 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 33 components and 0.338798 Jy
! Inverting map 
! Added new window around map position (48.4, -24.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300162 Jy
! Component: 100  -  total flux cleaned = 0.00534019 Jy
! Component: 150  -  total flux cleaned = 0.0072974 Jy
! Component: 200  -  total flux cleaned = 0.00897944 Jy
! Total flux subtracted in 200 components = 0.00897944 Jy
! Clean residual min=-0.002044 max=0.001639 Jy/beam
! Clean residual mean=-0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.347777 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 74 components and 0.347777 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.129 mas, bmaj=2.751 mas, bpa=0.8521 degrees
! Estimated noise=0.312246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022874 Jy
! Component: 100  -  total flux cleaned = 0.00391718 Jy
! Component: 150  -  total flux cleaned = 0.00475202 Jy
! Component: 200  -  total flux cleaned = 0.00528927 Jy
! Total flux subtracted in 200 components = 0.00528927 Jy
! Clean residual min=-0.002327 max=0.001932 Jy/beam
! Clean residual mean=-0.000003 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.353067 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000478173 Jy
! Component: 100  -  total flux cleaned = 0.00090646 Jy
! Component: 150  -  total flux cleaned = 0.00126045 Jy
! Component: 200  -  total flux cleaned = 0.00161048 Jy
! Total flux subtracted in 200 components = 0.00161048 Jy
! Clean residual min=-0.002033 max=0.001885 Jy/beam
! Clean residual mean=-0.000003 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.354677 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 146 components and 0.354677 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9824 mas, bmaj=1.635 mas, bpa=-0.002469 degrees
! Estimated noise=0.256075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000522262 Jy
! Component: 100  -  total flux cleaned = 0.000949434 Jy
! Component: 150  -  total flux cleaned = 0.00129838 Jy
! Component: 200  -  total flux cleaned = 0.00156132 Jy
! Total flux subtracted in 200 components = 0.00156132 Jy
! Clean residual min=-0.001605 max=0.001431 Jy/beam
! Clean residual mean=-0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.356238 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 167 components and 0.356238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067518Jy  sigma=1.353228
! Fit after  self-cal, rms=0.067500Jy  sigma=1.352965
wmodel /J0112+3208_X_map.mod
! wmodel: Unable to open new model file: /J0112+3208_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0112+3208_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9824 x 1.635 at -0.002469 degrees (North through East)
! Clean map  min=-0.0014185  max=0.29066 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0112+3208_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.290663 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000372585 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.384553 0.384553 0.769105 1.53821 3.07642 6.15284 12.3057 24.6114 49.2227 98.4455
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.29 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  780.127 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0112+3208_X_dfm.log closed on Thu May 19 19:55:27 2016