! Started logfile: /scr/pima/bg219b_uvs/J0112+2244_X_dfm.log on Thu May 19 19:55:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0112+2244_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0112+2244_X_uva.fits
! AN table 1: 18 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.780247 visibilities/baseline/integration-bin.
! Found source: J0112+2244
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 7584 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0112+2244_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.086798Jy  sigma=24.727665
! Fit after  self-cal, rms=0.616255Jy  sigma=13.977407
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7185 mas, bmaj=2.134 mas, bpa=-9.7 degrees
! Estimated noise=0.601802 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.287286 Jy
! Component: 100  -  total flux cleaned = 0.365146 Jy
! Total flux subtracted in 100 components = 0.365146 Jy
! Clean residual min=-0.013120 max=0.033131 Jy/beam
! Clean residual mean=-0.000001 rms=0.003162 Jy/beam
! Combined flux in latest and established models = 0.365146 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.365146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087531Jy  sigma=1.932318
! Fit after  self-cal, rms=0.087487Jy  sigma=1.931170
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0351613 Jy
! Component: 100  -  total flux cleaned = 0.0521832 Jy
! Total flux subtracted in 100 components = 0.0521832 Jy
! Clean residual min=-0.007189 max=0.010821 Jy/beam
! Clean residual mean=-0.000000 rms=0.001715 Jy/beam
! Combined flux in latest and established models = 0.41733 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.41733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070696Jy  sigma=1.540518
! Fit after  self-cal, rms=0.070667Jy  sigma=1.539861
! Inverting map 
! Added new window around map position (1.4, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115132 Jy
! Component: 100  -  total flux cleaned = 0.0191873 Jy
! Total flux subtracted in 100 components = 0.0191873 Jy
! Clean residual min=-0.006999 max=0.006565 Jy/beam
! Clean residual mean=0.000001 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 0.436517 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.436517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068099Jy  sigma=1.482379
! Fit after  self-cal, rms=0.067988Jy  sigma=1.479405
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9371 mas, bmaj=2.341 mas, bpa=-8.497 degrees
! Estimated noise=0.389763 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00806047 Jy
! Component: 100  -  total flux cleaned = 0.0126592 Jy
! Component: 150  -  total flux cleaned = 0.0159087 Jy
! Component: 200  -  total flux cleaned = 0.0183278 Jy
! Total flux subtracted in 200 components = 0.0183278 Jy
! Clean residual min=-0.004809 max=0.005302 Jy/beam
! Clean residual mean=-0.000001 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.454845 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 45 components and 0.454845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066894Jy  sigma=1.456209
! Fit after  self-cal, rms=0.066813Jy  sigma=1.453807
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9371 x 2.341 at -8.497 degrees (North through East)
! Clean map  min=-0.0042337  max=0.38256 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        0.97     
!   LA        0.99     MK        0.97     NL        1.03     OV        0.98     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.03     KP        1.00     
!   LA        1.00     MK        1.04     NL        1.05     OV        1.01     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.06     KP        1.03     
!   LA        1.00     MK        1.05     NL        1.07     OV        1.02     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.03     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.01     KP        1.00     
!   LA        1.00     MK        1.06     NL        1.05     OV        0.99     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.03     KP        1.04     
!   LA        1.02     MK        1.08     NL        1.05     OV        1.01     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.97     MK        1.05     NL        1.02     OV        0.97     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.98     KP        0.99     
!   LA        0.96     MK        1.04     NL        1.06     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.96     KP        0.97     
!   LA        0.94     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.97     KP        0.95     
!   LA        0.95     MK        1.02     NL        1.02     OV        1.02     
!   PT        0.93     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        0.94     KP        0.95     
!   LA        0.95     MK        0.98     NL        0.98     OV        0.94     
!   PT        0.94     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.066813Jy  sigma=1.453807
! Fit after  self-cal, rms=0.062705Jy  sigma=1.369594
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9433 mas, bmaj=2.346 mas, bpa=-8.382 degrees
! Estimated noise=0.390129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00249918 Jy
! Component: 100  -  total flux cleaned = -0.0030235 Jy
! Component: 150  -  total flux cleaned = -0.00322422 Jy
! Component: 200  -  total flux cleaned = -0.00335201 Jy
! Total flux subtracted in 200 components = -0.00335201 Jy
! Clean residual min=-0.003867 max=0.003793 Jy/beam
! Clean residual mean=-0.000000 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.451493 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.451493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062573Jy  sigma=1.366506
! Fit after  self-cal, rms=0.062564Jy  sigma=1.366265
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062564Jy  sigma=1.366265
! Fit after  self-cal, rms=0.061838Jy  sigma=1.348806
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.944 mas, bmaj=2.344 mas, bpa=-8.459 degrees
! Estimated noise=0.390042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00187237 Jy
! Component: 100  -  total flux cleaned = -0.00217177 Jy
! Component: 150  -  total flux cleaned = -0.00221287 Jy
! Component: 200  -  total flux cleaned = -0.00224767 Jy
! Total flux subtracted in 200 components = -0.00224767 Jy
! Clean residual min=-0.002742 max=0.002814 Jy/beam
! Clean residual mean=-0.000000 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.449245 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.449245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061764Jy  sigma=1.347223
! Fit after  self-cal, rms=0.061759Jy  sigma=1.347111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002692 Jy
! Component: 100  -  total flux cleaned = 0.00387637 Jy
! Component: 150  -  total flux cleaned = 0.00419578 Jy
! Component: 200  -  total flux cleaned = 0.00441468 Jy
! Total flux subtracted in 200 components = 0.00441468 Jy
! Clean residual min=-0.002459 max=0.002586 Jy/beam
! Clean residual mean=0.000001 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.45366 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 78 components and 0.45366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061614Jy  sigma=1.343851
! Fit after  self-cal, rms=0.061601Jy  sigma=1.343569
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061601Jy  sigma=1.343569
! Fit after  self-cal, rms=0.061564Jy  sigma=1.343241
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9444 mas, bmaj=2.344 mas, bpa=-8.483 degrees
! Estimated noise=0.389834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000358172 Jy
! Component: 100  -  total flux cleaned = 0.000672408 Jy
! Component: 150  -  total flux cleaned = 0.000746072 Jy
! Component: 200  -  total flux cleaned = 0.000779586 Jy
! Total flux subtracted in 200 components = 0.000779586 Jy
! Clean residual min=-0.002324 max=0.002321 Jy/beam
! Clean residual mean=0.000001 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.454439 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 87 components and 0.454439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061511Jy  sigma=1.342073
! Fit after  self-cal, rms=0.061508Jy  sigma=1.342013
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172869 Jy
! Component: 100  -  total flux cleaned = 0.000295783 Jy
! Component: 150  -  total flux cleaned = 0.000323573 Jy
! Component: 200  -  total flux cleaned = 0.000376119 Jy
! Total flux subtracted in 200 components = 0.000376119 Jy
! Clean residual min=-0.002283 max=0.002289 Jy/beam
! Clean residual mean=0.000001 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.454815 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.454816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061483Jy  sigma=1.341455
! Fit after  self-cal, rms=0.061482Jy  sigma=1.341430
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061482Jy  sigma=1.341430
! Fit after  self-cal, rms=0.061433Jy  sigma=1.341306
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.076 mas, bmaj=2.886 mas, bpa=-4.461 degrees
! Estimated noise=0.473223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000650391 Jy
! Component: 100  -  total flux cleaned = 0.000744497 Jy
! Component: 150  -  total flux cleaned = 0.00082539 Jy
! Component: 200  -  total flux cleaned = 0.000843032 Jy
! Total flux subtracted in 200 components = 0.000843032 Jy
! Clean residual min=-0.002967 max=0.002608 Jy/beam
! Clean residual mean=0.000001 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.455659 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 104 components and 0.455659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061426Jy  sigma=1.341095
! Fit after  self-cal, rms=0.061425Jy  sigma=1.341072
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155012 Jy
! Component: 100  -  total flux cleaned = 0.000168368 Jy
! Component: 150  -  total flux cleaned = 0.000181508 Jy
! Component: 200  -  total flux cleaned = 0.000193681 Jy
! Total flux subtracted in 200 components = 0.000193681 Jy
! Clean residual min=-0.002949 max=0.002653 Jy/beam
! Clean residual mean=0.000001 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.455852 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 113 components and 0.455852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061421Jy  sigma=1.340999
! Fit after  self-cal, rms=0.061421Jy  sigma=1.340991
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9445 mas, bmaj=2.344 mas, bpa=-8.49 degrees
! Estimated noise=0.389525 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9445 x 2.344 at -8.49 degrees (North through East)
! Clean map  min=-0.0021084  max=0.38244 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7245 mas, bmaj=2.134 mas, bpa=-9.653 degrees
! Estimated noise=0.600675 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.286635 Jy
! Component: 100  -  total flux cleaned = 0.362814 Jy
! Component: 150  -  total flux cleaned = 0.396364 Jy
! Component: 200  -  total flux cleaned = 0.413473 Jy
! Total flux subtracted in 200 components = 0.413473 Jy
! Clean residual min=-0.006266 max=0.008671 Jy/beam
! Clean residual mean=-0.000003 rms=0.001301 Jy/beam
! Combined flux in latest and established models = 0.413473 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.413473 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9445 mas, bmaj=2.344 mas, bpa=-8.49 degrees
! Estimated noise=0.389525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143293 Jy
! Component: 100  -  total flux cleaned = 0.0224105 Jy
! Component: 150  -  total flux cleaned = 0.0274464 Jy
! Component: 200  -  total flux cleaned = 0.0309958 Jy
! Total flux subtracted in 200 components = 0.0309958 Jy
! Clean residual min=-0.003039 max=0.002492 Jy/beam
! Clean residual mean=-0.000001 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.444468 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 35 components and 0.444468 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.076 mas, bmaj=2.886 mas, bpa=-4.461 degrees
! Estimated noise=0.473223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00370112 Jy
! Component: 100  -  total flux cleaned = 0.00606415 Jy
! Component: 150  -  total flux cleaned = 0.00772111 Jy
! Component: 200  -  total flux cleaned = 0.00891568 Jy
! Total flux subtracted in 200 components = 0.00891568 Jy
! Clean residual min=-0.003137 max=0.002642 Jy/beam
! Clean residual mean=0.000000 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.453384 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000870911 Jy
! Component: 100  -  total flux cleaned = 0.00149016 Jy
! Component: 150  -  total flux cleaned = 0.00177026 Jy
! Component: 200  -  total flux cleaned = 0.00199787 Jy
! Total flux subtracted in 200 components = 0.00199787 Jy
! Clean residual min=-0.002989 max=0.002639 Jy/beam
! Clean residual mean=0.000001 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.455382 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 83 components and 0.455382 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9445 mas, bmaj=2.344 mas, bpa=-8.49 degrees
! Estimated noise=0.389525 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184009 Jy
! Component: 100  -  total flux cleaned = 0.00018574 Jy
! Component: 150  -  total flux cleaned = 0.000183527 Jy
! Component: 200  -  total flux cleaned = 0.000182916 Jy
! Total flux subtracted in 200 components = 0.000182916 Jy
! Clean residual min=-0.002455 max=0.002511 Jy/beam
! Clean residual mean=0.000001 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.455565 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 101 components and 0.455565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061533Jy  sigma=1.343238
! Fit after  self-cal, rms=0.061524Jy  sigma=1.343066
wmodel /J0112+2244_X_map.mod
! wmodel: Unable to open new model file: /J0112+2244_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0112+2244_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9445 x 2.344 at -8.49 degrees (North through East)
! Clean map  min=-0.0021987  max=0.3828 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0112+2244_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.382799 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000581277 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.455548 0.455548 0.911095 1.82219 3.64438 7.28876 14.5775 29.1551 58.3101
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.382 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  658.547 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0112+2244_X_dfm.log closed on Thu May 19 19:55:19 2016