! Started logfile: /scr/pima/bg219b_uvs/J0046+2456_X_dfm.log on Thu May 19 19:54:38 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0046+2456_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0046+2456_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.877778 visibilities/baseline/integration-bin.
! Found source: J0046+2456
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13272 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0046+2456_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.037351Jy  sigma=24.735151
! Fit after  self-cal, rms=0.760183Jy  sigma=18.047746
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7304 mas, bmaj=1.519 mas, bpa=-1.826 degrees
! Estimated noise=0.484201 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180412 Jy
! Component: 100  -  total flux cleaned = 0.225307 Jy
! Total flux subtracted in 100 components = 0.225307 Jy
! Clean residual min=-0.007030 max=0.018725 Jy/beam
! Clean residual mean=0.000006 rms=0.001895 Jy/beam
! Combined flux in latest and established models = 0.225307 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.225307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071486Jy  sigma=1.628659
! Fit after  self-cal, rms=0.071432Jy  sigma=1.627004
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206153 Jy
! Component: 100  -  total flux cleaned = 0.0312935 Jy
! Total flux subtracted in 100 components = 0.0312935 Jy
! Clean residual min=-0.004291 max=0.009339 Jy/beam
! Clean residual mean=0.000000 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 0.2566 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.2566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063969Jy  sigma=1.436262
! Fit after  self-cal, rms=0.063955Jy  sigma=1.435822
! Inverting map 
! Added new window around map position (-1.6, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00851812 Jy
! Component: 100  -  total flux cleaned = 0.0134041 Jy
! Total flux subtracted in 100 components = 0.0134041 Jy
! Clean residual min=-0.004020 max=0.004806 Jy/beam
! Clean residual mean=-0.000002 rms=0.000932 Jy/beam
! Combined flux in latest and established models = 0.270004 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.270004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062467Jy  sigma=1.398349
! Fit after  self-cal, rms=0.062367Jy  sigma=1.395879
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.942 mas, bmaj=1.846 mas, bpa=-2.373 degrees
! Estimated noise=0.291277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00555154 Jy
! Component: 100  -  total flux cleaned = 0.00875248 Jy
! Component: 150  -  total flux cleaned = 0.0110118 Jy
! Component: 200  -  total flux cleaned = 0.0126929 Jy
! Total flux subtracted in 200 components = 0.0126929 Jy
! Clean residual min=-0.003135 max=0.002978 Jy/beam
! Clean residual mean=-0.000009 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.282697 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 42 components and 0.282697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061823Jy  sigma=1.382641
! Fit after  self-cal, rms=0.061774Jy  sigma=1.381412
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.942 x 1.846 at -2.373 degrees (North through East)
! Clean map  min=-0.0028884  max=0.23928 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.01     KP        0.97     
!   LA        1.01     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.04     KP        1.00     
!   LA        1.01     MK        1.04     NL        1.04     OV        1.02     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.04     KP        1.02     
!   LA        1.01     MK        1.05     NL        1.06     OV        1.03     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.00     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.99     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.97     KP        1.01     
!   LA        1.00     MK        1.03     NL        1.04     OV        1.04     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.01     KP        1.02     
!   LA        1.00     MK        1.06     NL        1.05     OV        1.03     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.99     KP        1.04     
!   LA        1.00     MK        1.04     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.04     NL        1.04     OV        0.99     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.97     KP        0.99     
!   LA        0.96     MK        1.00     NL        0.99     OV        0.97     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.99     KP        0.98     
!   LA        0.97     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        0.94     KP        0.95     
!   LA        0.97     MK        0.98     NL        0.97     OV        0.94     
!   PT        0.91     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.061774Jy  sigma=1.381412
! Fit after  self-cal, rms=0.060037Jy  sigma=1.347812
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9482 mas, bmaj=1.854 mas, bpa=-2.385 degrees
! Estimated noise=0.291641 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00018124 Jy
! Component: 100  -  total flux cleaned = -6.32906e-05 Jy
! Component: 150  -  total flux cleaned = 3.30409e-05 Jy
! Component: 200  -  total flux cleaned = 4.99175e-05 Jy
! Total flux subtracted in 200 components = 4.99175e-05 Jy
! Clean residual min=-0.001900 max=0.002223 Jy/beam
! Clean residual mean=-0.000004 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.282747 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 0.282747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060018Jy  sigma=1.347370
! Fit after  self-cal, rms=0.060015Jy  sigma=1.347283
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060015Jy  sigma=1.347283
! Fit after  self-cal, rms=0.059932Jy  sigma=1.341861
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9493 mas, bmaj=1.851 mas, bpa=-2.381 degrees
! Estimated noise=0.291732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000139902 Jy
! Component: 100  -  total flux cleaned = -5.40489e-05 Jy
! Component: 150  -  total flux cleaned = -1.81745e-05 Jy
! Component: 200  -  total flux cleaned = 1.38085e-05 Jy
! Total flux subtracted in 200 components = 1.38085e-05 Jy
! Clean residual min=-0.001868 max=0.002027 Jy/beam
! Clean residual mean=-0.000003 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.282761 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.282761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059916Jy  sigma=1.341554
! Fit after  self-cal, rms=0.059917Jy  sigma=1.341512
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (23.6, 21.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170701 Jy
! Component: 100  -  total flux cleaned = 0.00201244 Jy
! Component: 150  -  total flux cleaned = 0.00213406 Jy
! Component: 200  -  total flux cleaned = 0.00229316 Jy
! Total flux subtracted in 200 components = 0.00229316 Jy
! Clean residual min=-0.001839 max=0.001675 Jy/beam
! Clean residual mean=-0.000002 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.285054 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 0.285054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059859Jy  sigma=1.340132
! Fit after  self-cal, rms=0.059858Jy  sigma=1.340090
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059858Jy  sigma=1.340090
! Fit after  self-cal, rms=0.059880Jy  sigma=1.340022
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.95 mas, bmaj=1.851 mas, bpa=-2.411 degrees
! Estimated noise=0.291698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173792 Jy
! Component: 100  -  total flux cleaned = 0.000267136 Jy
! Component: 150  -  total flux cleaned = 0.000353009 Jy
! Component: 200  -  total flux cleaned = 0.000412703 Jy
! Total flux subtracted in 200 components = 0.000412703 Jy
! Clean residual min=-0.001793 max=0.001662 Jy/beam
! Clean residual mean=-0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.285467 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 0.285467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059863Jy  sigma=1.339686
! Fit after  self-cal, rms=0.059863Jy  sigma=1.339671
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.31863e-05 Jy
! Component: 100  -  total flux cleaned = 8.76395e-05 Jy
! Component: 150  -  total flux cleaned = 0.000138227 Jy
! Component: 200  -  total flux cleaned = 0.000138197 Jy
! Total flux subtracted in 200 components = 0.000138197 Jy
! Clean residual min=-0.001764 max=0.001657 Jy/beam
! Clean residual mean=-0.000001 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.285605 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 95 components and 0.285605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059853Jy  sigma=1.339473
! Fit after  self-cal, rms=0.059853Jy  sigma=1.339464
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059853Jy  sigma=1.339464
! Fit after  self-cal, rms=0.059868Jy  sigma=1.339450
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.081 mas, bmaj=2.711 mas, bpa=-0.553 degrees
! Estimated noise=0.358068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.8156e-05 Jy
! Component: 100  -  total flux cleaned = 5.37178e-05 Jy
! Component: 150  -  total flux cleaned = 4.05695e-05 Jy
! Component: 200  -  total flux cleaned = 5.2698e-05 Jy
! Total flux subtracted in 200 components = 5.2698e-05 Jy
! Clean residual min=-0.002226 max=0.001780 Jy/beam
! Clean residual mean=-0.000002 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.285658 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 109 components and 0.285658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059867Jy  sigma=1.339369
! Fit after  self-cal, rms=0.059865Jy  sigma=1.339359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.43932e-06 Jy
! Component: 100  -  total flux cleaned = 1.67453e-05 Jy
! Component: 150  -  total flux cleaned = 2.7283e-05 Jy
! Component: 200  -  total flux cleaned = 1.70207e-05 Jy
! Total flux subtracted in 200 components = 1.70207e-05 Jy
! Clean residual min=-0.002198 max=0.001768 Jy/beam
! Clean residual mean=-0.000002 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.285675 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 110 components and 0.285675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059866Jy  sigma=1.339334
! Fit after  self-cal, rms=0.059865Jy  sigma=1.339327
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9503 mas, bmaj=1.851 mas, bpa=-2.423 degrees
! Estimated noise=0.291729 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9503 x 1.851 at -2.423 degrees (North through East)
! Clean map  min=-0.0016631  max=0.2396 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.736 mas, bmaj=1.524 mas, bpa=-1.924 degrees
! Estimated noise=0.485212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180692 Jy
! Component: 100  -  total flux cleaned = 0.2249 Jy
! Component: 150  -  total flux cleaned = 0.2446 Jy
! Component: 200  -  total flux cleaned = 0.256287 Jy
! Total flux subtracted in 200 components = 0.256287 Jy
! Clean residual min=-0.003645 max=0.006107 Jy/beam
! Clean residual mean=0.000003 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.256287 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.256287 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9503 mas, bmaj=1.851 mas, bpa=-2.423 degrees
! Estimated noise=0.291729 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100627 Jy
! Component: 100  -  total flux cleaned = 0.015508 Jy
! Component: 150  -  total flux cleaned = 0.0189067 Jy
! Component: 200  -  total flux cleaned = 0.0213643 Jy
! Total flux subtracted in 200 components = 0.0213643 Jy
! Clean residual min=-0.002074 max=0.001784 Jy/beam
! Clean residual mean=-0.000004 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.277651 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 41 components and 0.277651 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.081 mas, bmaj=2.711 mas, bpa=-0.553 degrees
! Estimated noise=0.358068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00265363 Jy
! Component: 100  -  total flux cleaned = 0.00421775 Jy
! Component: 150  -  total flux cleaned = 0.00527121 Jy
! Component: 200  -  total flux cleaned = 0.00593185 Jy
! Total flux subtracted in 200 components = 0.00593185 Jy
! Clean residual min=-0.002320 max=0.001704 Jy/beam
! Clean residual mean=-0.000004 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.283583 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000352493 Jy
! Component: 100  -  total flux cleaned = 0.000650617 Jy
! Component: 150  -  total flux cleaned = 0.000837181 Jy
! Component: 200  -  total flux cleaned = 0.000971201 Jy
! Total flux subtracted in 200 components = 0.000971201 Jy
! Clean residual min=-0.002195 max=0.001708 Jy/beam
! Clean residual mean=-0.000003 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.284554 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 80 components and 0.284554 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9503 mas, bmaj=1.851 mas, bpa=-2.423 degrees
! Estimated noise=0.291729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032352 Jy
! Component: 100  -  total flux cleaned = 0.000353086 Jy
! Component: 150  -  total flux cleaned = 0.000434413 Jy
! Component: 200  -  total flux cleaned = 0.00046008 Jy
! Total flux subtracted in 200 components = 0.00046008 Jy
! Clean residual min=-0.001816 max=0.001783 Jy/beam
! Clean residual mean=-0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.285014 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 95 components and 0.285014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059908Jy  sigma=1.340234
! Fit after  self-cal, rms=0.059901Jy  sigma=1.340119
wmodel /J0046+2456_X_map.mod
! wmodel: Unable to open new model file: /J0046+2456_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0046+2456_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9503 x 1.851 at -2.423 degrees (North through East)
! Clean map  min=-0.0016577  max=0.23979 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0046+2456_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.239785 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00041506 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.519289 0.519289 1.03858 2.07715 4.15431 8.30862 16.6172 33.2345 66.469
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.239 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  577.713 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0046+2456_X_dfm.log closed on Thu May 19 19:54:40 2016