! Started logfile: /scr/pima/bg219b_uvs/J0036+1434_X_dfm.log on Thu May 19 19:54:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0036+1434_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0036+1434_X_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.854589 visibilities/baseline/integration-bin.
! Found source: J0036+1434
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21228 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0036+1434_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007882Jy  sigma=27.001298
! Fit after  self-cal, rms=0.912349Jy  sigma=24.371773
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7009 mas, bmaj=1.631 mas, bpa=-2.752 degrees
! Estimated noise=0.346638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0608612 Jy
! Component: 100  -  total flux cleaned = 0.0875438 Jy
! Total flux subtracted in 100 components = 0.0875438 Jy
! Clean residual min=-0.004876 max=0.012808 Jy/beam
! Clean residual mean=-0.000006 rms=0.001421 Jy/beam
! Combined flux in latest and established models = 0.0875438 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0875438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067656Jy  sigma=1.708505
! Fit after  self-cal, rms=0.066404Jy  sigma=1.683370
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168899 Jy
! Component: 100  -  total flux cleaned = 0.0258082 Jy
! Total flux subtracted in 100 components = 0.0258082 Jy
! Clean residual min=-0.003377 max=0.008077 Jy/beam
! Clean residual mean=-0.000004 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.113352 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.113352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060563Jy  sigma=1.507136
! Fit after  self-cal, rms=0.060420Jy  sigma=1.504661
! Inverting map 
! Added new window around map position (-1.2, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00771543 Jy
! Component: 100  -  total flux cleaned = 0.01204 Jy
! Total flux subtracted in 100 components = 0.01204 Jy
! Clean residual min=-0.002726 max=0.002855 Jy/beam
! Clean residual mean=-0.000003 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.125392 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.125392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059178Jy  sigma=1.468115
! Fit after  self-cal, rms=0.059110Jy  sigma=1.466334
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9247 mas, bmaj=1.923 mas, bpa=-3.317 degrees
! Estimated noise=0.187542 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00450295 Jy
! Component: 100  -  total flux cleaned = 0.00699872 Jy
! Component: 150  -  total flux cleaned = 0.00861614 Jy
! Component: 200  -  total flux cleaned = 0.00972531 Jy
! Total flux subtracted in 200 components = 0.00972531 Jy
! Clean residual min=-0.001672 max=0.002340 Jy/beam
! Clean residual mean=-0.000009 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.135117 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 40 components and 0.135117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058754Jy  sigma=1.456134
! Fit after  self-cal, rms=0.058732Jy  sigma=1.455445
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9247 x 1.923 at -3.317 degrees (North through East)
! Clean map  min=-0.0016731  max=0.08625 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.03     KP        0.97     
!   LA        0.98     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.03     KP        1.00     
!   LA        0.96     MK        1.00     NL        1.09     OV        1.04     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.06     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.08     OV        1.01     
!   PT        1.04     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        1.00     
!   LA        0.95     MK        1.04     NL        1.00     OV        1.02     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.01     KP        1.02     
!   LA        0.96     MK        1.00     NL        1.02     OV        1.01     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.06     KP        1.00     
!   LA        0.95     MK        1.03     NL        1.03     OV        1.04     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        0.98     KP        1.06     
!   LA        1.02     MK        0.98     NL        1.06     OV        1.03     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.97     MK        0.99     NL        0.99     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        0.95     KP        1.02     
!   LA        0.97     MK        1.00     NL        1.01     OV        1.01     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.97     KP        1.01     
!   LA        0.93     MK        0.99     NL        1.03     OV        0.98     
!   PT        0.96     SC        0.92     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.99     KP        1.02     
!   LA        0.94     MK        1.04     NL        1.00     OV        0.98     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.94     KP        0.97     
!   LA        0.93     MK        1.04     NL        0.98     OV        0.94     
!   PT        0.91     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.058732Jy  sigma=1.455445
! Fit after  self-cal, rms=0.058049Jy  sigma=1.448088
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9284 mas, bmaj=1.93 mas, bpa=-3.2 degrees
! Estimated noise=0.187364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.6, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218193 Jy
! Component: 100  -  total flux cleaned = 0.00334907 Jy
! Component: 150  -  total flux cleaned = 0.00415622 Jy
! Component: 200  -  total flux cleaned = 0.00462841 Jy
! Total flux subtracted in 200 components = 0.00462841 Jy
! Clean residual min=-0.001321 max=0.001594 Jy/beam
! Clean residual mean=-0.000004 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.139746 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 60 components and 0.139746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057964Jy  sigma=1.445663
! Fit after  self-cal, rms=0.057969Jy  sigma=1.445422
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057969Jy  sigma=1.445422
! Fit after  self-cal, rms=0.058111Jy  sigma=1.442322
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9272 mas, bmaj=1.919 mas, bpa=-3.304 degrees
! Estimated noise=0.187275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000599142 Jy
! Component: 100  -  total flux cleaned = 0.000864891 Jy
! Component: 150  -  total flux cleaned = 0.00108802 Jy
! Component: 200  -  total flux cleaned = 0.00122423 Jy
! Total flux subtracted in 200 components = 0.00122423 Jy
! Clean residual min=-0.001246 max=0.001359 Jy/beam
! Clean residual mean=-0.000002 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.14097 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 74 components and 0.14097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058098Jy  sigma=1.441976
! Fit after  self-cal, rms=0.058108Jy  sigma=1.441898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141957 Jy
! Component: 100  -  total flux cleaned = 0.00223683 Jy
! Component: 150  -  total flux cleaned = 0.002506 Jy
! Component: 200  -  total flux cleaned = 0.0025943 Jy
! Total flux subtracted in 200 components = 0.0025943 Jy
! Clean residual min=-0.001138 max=0.001109 Jy/beam
! Clean residual mean=-0.000001 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.143564 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 94 components and 0.143564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058070Jy  sigma=1.440856
! Fit after  self-cal, rms=0.058067Jy  sigma=1.440725
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058067Jy  sigma=1.440725
! Fit after  self-cal, rms=0.058049Jy  sigma=1.440655
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=1.92 mas, bpa=-3.37 degrees
! Estimated noise=0.187209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000652627 Jy
! Component: 100  -  total flux cleaned = 0.000867972 Jy
! Component: 150  -  total flux cleaned = 0.000956012 Jy
! Component: 200  -  total flux cleaned = 0.000996241 Jy
! Total flux subtracted in 200 components = 0.000996241 Jy
! Clean residual min=-0.001108 max=0.001066 Jy/beam
! Clean residual mean=-0.000001 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.14456 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 102 components and 0.14456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058039Jy  sigma=1.440390
! Fit after  self-cal, rms=0.058039Jy  sigma=1.440367
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00022886 Jy
! Component: 100  -  total flux cleaned = 0.000266337 Jy
! Component: 150  -  total flux cleaned = 0.000301675 Jy
! Component: 200  -  total flux cleaned = 0.000356556 Jy
! Total flux subtracted in 200 components = 0.000356556 Jy
! Clean residual min=-0.001108 max=0.001071 Jy/beam
! Clean residual mean=-0.000001 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.144917 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 106 components and 0.144917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058034Jy  sigma=1.440249
! Fit after  self-cal, rms=0.058034Jy  sigma=1.440242
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058034Jy  sigma=1.440242
! Fit after  self-cal, rms=0.058004Jy  sigma=1.440224
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.098 mas, bmaj=2.942 mas, bpa=-5.258 degrees
! Estimated noise=0.230041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000452332 Jy
! Component: 100  -  total flux cleaned = 0.000614107 Jy
! Component: 150  -  total flux cleaned = 0.000692732 Jy
! Component: 200  -  total flux cleaned = 0.000743728 Jy
! Total flux subtracted in 200 components = 0.000743728 Jy
! Clean residual min=-0.001082 max=0.001310 Jy/beam
! Clean residual mean=-0.000002 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.145661 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 118 components and 0.145661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058003Jy  sigma=1.440190
! Fit after  self-cal, rms=0.058004Jy  sigma=1.440176
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.8, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126702 Jy
! Component: 100  -  total flux cleaned = 0.00200492 Jy
! Component: 150  -  total flux cleaned = 0.00254302 Jy
! Component: 200  -  total flux cleaned = 0.00287039 Jy
! Total flux subtracted in 200 components = 0.00287039 Jy
! Clean residual min=-0.001040 max=0.000879 Jy/beam
! Clean residual mean=0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.148531 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 162 components and 0.148531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057989Jy  sigma=1.439681
! Fit after  self-cal, rms=0.057988Jy  sigma=1.439623
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=1.92 mas, bpa=-3.374 degrees
! Estimated noise=0.187149 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9274 x 1.92 at -3.374 degrees (North through East)
! Clean map  min=-0.00091957  max=0.086259 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.703 mas, bmaj=1.626 mas, bpa=-2.736 degrees
! Estimated noise=0.344661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0619211 Jy
! Component: 100  -  total flux cleaned = 0.0903388 Jy
! Component: 150  -  total flux cleaned = 0.105672 Jy
! Component: 200  -  total flux cleaned = 0.115146 Jy
! Total flux subtracted in 200 components = 0.115146 Jy
! Clean residual min=-0.003295 max=0.004947 Jy/beam
! Clean residual mean=-0.000003 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.115146 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.115146 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=1.92 mas, bpa=-3.374 degrees
! Estimated noise=0.187149 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00863937 Jy
! Component: 100  -  total flux cleaned = 0.013068 Jy
! Component: 150  -  total flux cleaned = 0.0159725 Jy
! Component: 200  -  total flux cleaned = 0.0182273 Jy
! Total flux subtracted in 200 components = 0.0182273 Jy
! Clean residual min=-0.001516 max=0.001520 Jy/beam
! Clean residual mean=-0.000006 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.133373 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 40 components and 0.133373 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.098 mas, bmaj=2.942 mas, bpa=-5.258 degrees
! Estimated noise=0.230041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322618 Jy
! Component: 100  -  total flux cleaned = 0.00553439 Jy
! Component: 150  -  total flux cleaned = 0.00729199 Jy
! Component: 200  -  total flux cleaned = 0.00867961 Jy
! Total flux subtracted in 200 components = 0.00867961 Jy
! Clean residual min=-0.001198 max=0.001342 Jy/beam
! Clean residual mean=-0.000005 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.142053 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113834 Jy
! Component: 100  -  total flux cleaned = 0.00210457 Jy
! Component: 150  -  total flux cleaned = 0.00294079 Jy
! Component: 200  -  total flux cleaned = 0.00366711 Jy
! Total flux subtracted in 200 components = 0.00366711 Jy
! Clean residual min=-0.001063 max=0.001067 Jy/beam
! Clean residual mean=-0.000002 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.14572 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 120 components and 0.14572 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=1.92 mas, bpa=-3.374 degrees
! Estimated noise=0.187149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000373226 Jy
! Component: 100  -  total flux cleaned = 0.000751288 Jy
! Component: 150  -  total flux cleaned = 0.00111495 Jy
! Component: 200  -  total flux cleaned = 0.00135047 Jy
! Total flux subtracted in 200 components = 0.00135047 Jy
! Clean residual min=-0.000971 max=0.000907 Jy/beam
! Clean residual mean=-0.000000 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.14707 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 152 components and 0.14707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057988Jy  sigma=1.439723
! Fit after  self-cal, rms=0.057983Jy  sigma=1.439510
wmodel /J0036+1434_X_map.mod
! wmodel: Unable to open new model file: /J0036+1434_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0036+1434_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9274 x 1.92 at -3.374 degrees (North through East)
! Clean map  min=-0.00095805  max=0.086531 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0036+1434_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0865307 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000231436 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.802383 0.802383 1.60477 3.20953 6.41907 12.8381 25.6763 51.3525
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.086 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  373.886 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0036+1434_X_dfm.log closed on Thu May 19 19:54:25 2016