! Started logfile: /scr/pima/bg219b_uvs/J0035+1438_X_dfm.log on Thu May 19 19:54:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0035+1438_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0035+1438_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.905437 visibilities/baseline/integration-bin.
! Found source: J0035+1438
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22980 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0035+1438_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018245Jy  sigma=25.508144
! Fit after  self-cal, rms=0.837591Jy  sigma=20.923835
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7052 mas, bmaj=1.607 mas, bpa=-1.143 degrees
! Estimated noise=0.377801 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119717 Jy
! Component: 100  -  total flux cleaned = 0.151251 Jy
! Total flux subtracted in 100 components = 0.151251 Jy
! Clean residual min=-0.006350 max=0.017716 Jy/beam
! Clean residual mean=-0.000011 rms=0.001766 Jy/beam
! Combined flux in latest and established models = 0.151251 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.151251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073456Jy  sigma=1.746219
! Fit after  self-cal, rms=0.073345Jy  sigma=1.743930
! Inverting map 
! Added new window around map position (1.2, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192929 Jy
! Component: 100  -  total flux cleaned = 0.0323845 Jy
! Total flux subtracted in 100 components = 0.0323845 Jy
! Clean residual min=-0.003957 max=0.007304 Jy/beam
! Clean residual mean=-0.000007 rms=0.001100 Jy/beam
! Combined flux in latest and established models = 0.183636 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.183636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065799Jy  sigma=1.539255
! Fit after  self-cal, rms=0.065668Jy  sigma=1.535986
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.009969 Jy
! Component: 100  -  total flux cleaned = 0.0171524 Jy
! Total flux subtracted in 100 components = 0.0171524 Jy
! Clean residual min=-0.002852 max=0.004145 Jy/beam
! Clean residual mean=-0.000005 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.200788 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 34 components and 0.200788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063306Jy  sigma=1.471384
! Fit after  self-cal, rms=0.063267Jy  sigma=1.470440
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00579026 Jy
! Component: 100  -  total flux cleaned = 0.0101323 Jy
! Total flux subtracted in 100 components = 0.0101323 Jy
! Clean residual min=-0.002816 max=0.003238 Jy/beam
! Clean residual mean=-0.000004 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.210921 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.210921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062408Jy  sigma=1.447168
! Fit after  self-cal, rms=0.062397Jy  sigma=1.446786
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9151 mas, bmaj=1.937 mas, bpa=-2.334 degrees
! Estimated noise=0.192253 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536191 Jy
! Component: 100  -  total flux cleaned = 0.00900441 Jy
! Component: 150  -  total flux cleaned = 0.0116132 Jy
! Component: 200  -  total flux cleaned = 0.0135256 Jy
! Total flux subtracted in 200 components = 0.0135256 Jy
! Clean residual min=-0.001807 max=0.002112 Jy/beam
! Clean residual mean=-0.000005 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.224446 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 70 components and 0.224446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061826Jy  sigma=1.431910
! Fit after  self-cal, rms=0.061822Jy  sigma=1.431625
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9151 x 1.937 at -2.334 degrees (North through East)
! Clean map  min=-0.0016481  max=0.16191 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.00     KP        0.96     
!   LA        0.98     MK        0.96     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.03     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.03     OV        1.02     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.06     KP        1.03     
!   LA        1.03     MK        1.02     NL        1.04     OV        1.01     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.97     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.07     OV        1.01     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.05     KP        1.06     
!   LA        1.02     MK        1.03     NL        1.03     OV        1.03     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.99     KP        0.98     
!   LA        0.99     MK        1.04     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.97     
!   LA        0.93     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        0.95     
!   LA        0.95     MK        1.06     NL        1.02     OV        0.98     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.96     HN        0.91     KP        0.97     
!   LA        0.98     MK        0.98     NL        0.99     OV        0.94     
!   PT        0.90     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.061822Jy  sigma=1.431625
! Fit after  self-cal, rms=0.060661Jy  sigma=1.415264
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9194 mas, bmaj=1.944 mas, bpa=-2.277 degrees
! Estimated noise=0.191653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.72688e-05 Jy
! Component: 100  -  total flux cleaned = 0.000115864 Jy
! Component: 150  -  total flux cleaned = 0.00015325 Jy
! Component: 200  -  total flux cleaned = 0.000131302 Jy
! Total flux subtracted in 200 components = 0.000131302 Jy
! Clean residual min=-0.001382 max=0.001546 Jy/beam
! Clean residual mean=-0.000002 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.224577 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 77 components and 0.224577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060655Jy  sigma=1.415097
! Fit after  self-cal, rms=0.060660Jy  sigma=1.415052
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060660Jy  sigma=1.415052
! Fit after  self-cal, rms=0.060493Jy  sigma=1.411690
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9188 mas, bmaj=1.943 mas, bpa=-2.39 degrees
! Estimated noise=0.191417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.12978e-05 Jy
! Component: 100  -  total flux cleaned = -0.000141717 Jy
! Component: 150  -  total flux cleaned = -0.000173789 Jy
! Component: 200  -  total flux cleaned = -0.000173857 Jy
! Total flux subtracted in 200 components = -0.000173857 Jy
! Clean residual min=-0.001309 max=0.001569 Jy/beam
! Clean residual mean=-0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.224404 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 81 components and 0.224404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060489Jy  sigma=1.411571
! Fit after  self-cal, rms=0.060491Jy  sigma=1.411546
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-22.8, -23.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129076 Jy
! Component: 100  -  total flux cleaned = 0.0014636 Jy
! Component: 150  -  total flux cleaned = 0.00153023 Jy
! Component: 200  -  total flux cleaned = 0.0015735 Jy
! Total flux subtracted in 200 components = 0.0015735 Jy
! Clean residual min=-0.001270 max=0.001219 Jy/beam
! Clean residual mean=-0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.225977 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 94 components and 0.225977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060458Jy  sigma=1.410932
! Fit after  self-cal, rms=0.060457Jy  sigma=1.410883
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060457Jy  sigma=1.410883
! Fit after  self-cal, rms=0.060448Jy  sigma=1.410838
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9192 mas, bmaj=1.943 mas, bpa=-2.406 degrees
! Estimated noise=0.191333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251828 Jy
! Component: 100  -  total flux cleaned = 0.000265979 Jy
! Component: 150  -  total flux cleaned = 0.000252931 Jy
! Component: 200  -  total flux cleaned = 0.000241091 Jy
! Total flux subtracted in 200 components = 0.000241091 Jy
! Clean residual min=-0.001288 max=0.001194 Jy/beam
! Clean residual mean=-0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.226218 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 102 components and 0.226218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060441Jy  sigma=1.410716
! Fit after  self-cal, rms=0.060442Jy  sigma=1.410711
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.34209e-05 Jy
! Component: 100  -  total flux cleaned = 3.41366e-05 Jy
! Component: 150  -  total flux cleaned = 4.42731e-05 Jy
! Component: 200  -  total flux cleaned = 4.40952e-05 Jy
! Total flux subtracted in 200 components = 4.40952e-05 Jy
! Clean residual min=-0.001281 max=0.001165 Jy/beam
! Clean residual mean=-0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.226262 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 108 components and 0.226262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060439Jy  sigma=1.410634
! Fit after  self-cal, rms=0.060439Jy  sigma=1.410633
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060439Jy  sigma=1.410633
! Fit after  self-cal, rms=0.060451Jy  sigma=1.410625
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.068 mas, bmaj=2.945 mas, bpa=-5.297 degrees
! Estimated noise=0.239296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000179953 Jy
! Component: 100  -  total flux cleaned = -0.00021393 Jy
! Component: 150  -  total flux cleaned = -0.000221551 Jy
! Component: 200  -  total flux cleaned = -0.000215607 Jy
! Total flux subtracted in 200 components = -0.000215607 Jy
! Clean residual min=-0.001229 max=0.001189 Jy/beam
! Clean residual mean=-0.000002 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.226047 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 121 components and 0.226047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060450Jy  sigma=1.410613
! Fit after  self-cal, rms=0.060450Jy  sigma=1.410611
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.92407e-05 Jy
! Component: 100  -  total flux cleaned = 2.55349e-05 Jy
! Component: 150  -  total flux cleaned = 3.64443e-05 Jy
! Component: 200  -  total flux cleaned = 3.64772e-05 Jy
! Total flux subtracted in 200 components = 3.64772e-05 Jy
! Clean residual min=-0.001231 max=0.001182 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.226083 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 128 components and 0.226083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060450Jy  sigma=1.410608
! Fit after  self-cal, rms=0.060451Jy  sigma=1.410606
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9195 mas, bmaj=1.944 mas, bpa=-2.425 degrees
! Estimated noise=0.191331 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9195 x 1.944 at -2.425 degrees (North through East)
! Clean map  min=-0.001173  max=0.16102 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7087 mas, bmaj=1.612 mas, bpa=-1.201 degrees
! Estimated noise=0.375162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11871 Jy
! Component: 100  -  total flux cleaned = 0.150813 Jy
! Component: 150  -  total flux cleaned = 0.170174 Jy
! Component: 200  -  total flux cleaned = 0.183319 Jy
! Total flux subtracted in 200 components = 0.183319 Jy
! Clean residual min=-0.003357 max=0.007190 Jy/beam
! Clean residual mean=-0.000004 rms=0.000987 Jy/beam
! Combined flux in latest and established models = 0.183319 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.183319 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9195 mas, bmaj=1.944 mas, bpa=-2.425 degrees
! Estimated noise=0.191331 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136213 Jy
! Component: 100  -  total flux cleaned = 0.0220574 Jy
! Component: 150  -  total flux cleaned = 0.0276936 Jy
! Component: 200  -  total flux cleaned = 0.0315382 Jy
! Total flux subtracted in 200 components = 0.0315382 Jy
! Clean residual min=-0.001590 max=0.002399 Jy/beam
! Clean residual mean=-0.000005 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.214857 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 44 components and 0.214857 Jy
! Inverting map 
! Added new window around map position (-0.2, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276267 Jy
! Component: 100  -  total flux cleaned = 0.00480345 Jy
! Component: 150  -  total flux cleaned = 0.00635724 Jy
! Component: 200  -  total flux cleaned = 0.00757786 Jy
! Total flux subtracted in 200 components = 0.00757786 Jy
! Clean residual min=-0.001393 max=0.001189 Jy/beam
! Clean residual mean=-0.000002 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.222435 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 60 components and 0.222435 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.068 mas, bmaj=2.945 mas, bpa=-5.297 degrees
! Estimated noise=0.239296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141866 Jy
! Component: 100  -  total flux cleaned = 0.00228127 Jy
! Component: 150  -  total flux cleaned = 0.00293622 Jy
! Component: 200  -  total flux cleaned = 0.00344801 Jy
! Total flux subtracted in 200 components = 0.00344801 Jy
! Clean residual min=-0.001340 max=0.001221 Jy/beam
! Clean residual mean=-0.000002 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.225883 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000298917 Jy
! Component: 100  -  total flux cleaned = 0.000523022 Jy
! Component: 150  -  total flux cleaned = 0.000725696 Jy
! Component: 200  -  total flux cleaned = 0.000888726 Jy
! Total flux subtracted in 200 components = 0.000888726 Jy
! Clean residual min=-0.001299 max=0.001140 Jy/beam
! Clean residual mean=-0.000001 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.226772 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 100 components and 0.226772 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9195 mas, bmaj=1.944 mas, bpa=-2.425 degrees
! Estimated noise=0.191331 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000226491 Jy
! Component: 100  -  total flux cleaned = 0.000290311 Jy
! Component: 150  -  total flux cleaned = 0.000348774 Jy
! Component: 200  -  total flux cleaned = 0.000384399 Jy
! Total flux subtracted in 200 components = 0.000384399 Jy
! Clean residual min=-0.001284 max=0.001081 Jy/beam
! Clean residual mean=-0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.227156 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 119 components and 0.227156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060453Jy  sigma=1.410572
! Fit after  self-cal, rms=0.060448Jy  sigma=1.410528
wmodel /J0035+1438_X_map.mod
! wmodel: Unable to open new model file: /J0035+1438_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0035+1438_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9195 x 1.944 at -2.425 degrees (North through East)
! Clean map  min=-0.0011823  max=0.1617 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0035+1438_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.161697 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00026933 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.499695 0.499695 0.99939 1.99878 3.99756 7.99512 15.9902 31.9805 63.961
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.161 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  600.366 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0035+1438_X_dfm.log closed on Thu May 19 19:54:17 2016