! Started logfile: /scr/pima/bg219b_uvs/J0019+2602_S_dfm.log on Thu May 19 19:53:29 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J0019+2602_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0019+2602_S_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.888889 visibilities/baseline/integration-bin.
! Found source: J0019+2602
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5760 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0019+2602_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.048972Jy  sigma=25.069711
! Fit after  self-cal, rms=0.711102Jy  sigma=16.961744
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.849 mas, bmaj=6.252 mas, bpa=-5.869 degrees
! Estimated noise=0.559853 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.223227 Jy
! Component: 100  -  total flux cleaned = 0.275639 Jy
! Total flux subtracted in 100 components = 0.275639 Jy
! Clean residual min=-0.006465 max=0.019544 Jy/beam
! Clean residual mean=-0.000010 rms=0.001738 Jy/beam
! Combined flux in latest and established models = 0.275639 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.275639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064769Jy  sigma=1.461048
! Fit after  self-cal, rms=0.064765Jy  sigma=1.460764
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0200642 Jy
! Component: 100  -  total flux cleaned = 0.0296517 Jy
! Total flux subtracted in 100 components = 0.0296517 Jy
! Clean residual min=-0.004279 max=0.004851 Jy/beam
! Clean residual mean=-0.000005 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.305291 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.305291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058286Jy  sigma=1.298934
! Fit after  self-cal, rms=0.058269Jy  sigma=1.298415
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.371 mas, bmaj=7.095 mas, bpa=-5.256 degrees
! Estimated noise=0.427142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00609574 Jy
! Component: 100  -  total flux cleaned = 0.00936303 Jy
! Component: 150  -  total flux cleaned = 0.0113707 Jy
! Component: 200  -  total flux cleaned = 0.0127371 Jy
! Total flux subtracted in 200 components = 0.0127371 Jy
! Clean residual min=-0.003409 max=0.003262 Jy/beam
! Clean residual mean=0.000004 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.318028 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.318028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057585Jy  sigma=1.283495
! Fit after  self-cal, rms=0.057577Jy  sigma=1.283303
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.371 x 7.095 at -5.256 degrees (North through East)
! Clean map  min=-0.0032816  max=0.28921 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.00     NL        0.97     OV        1.01     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        1.01     
!   LA        0.98     MK        1.01     NL        1.01     OV        1.02     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.03     NL        1.03     OV        0.97     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.057577Jy  sigma=1.283303
! Fit after  self-cal, rms=0.056877Jy  sigma=1.270444
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=7.103 mas, bpa=-5.105 degrees
! Estimated noise=0.427326 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287866 Jy
! Component: 100  -  total flux cleaned = 0.000146801 Jy
! Component: 150  -  total flux cleaned = 4.87141e-05 Jy
! Component: 200  -  total flux cleaned = -1.85962e-05 Jy
! Total flux subtracted in 200 components = -1.85962e-05 Jy
! Clean residual min=-0.003193 max=0.003254 Jy/beam
! Clean residual mean=0.000005 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.318009 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.318009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056849Jy  sigma=1.269809
! Fit after  self-cal, rms=0.056844Jy  sigma=1.269718
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056844Jy  sigma=1.269718
! Fit after  self-cal, rms=0.056360Jy  sigma=1.259915
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=7.106 mas, bpa=-5.213 degrees
! Estimated noise=0.427526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000409465 Jy
! Component: 100  -  total flux cleaned = -0.00049797 Jy
! Component: 150  -  total flux cleaned = -0.000578888 Jy
! Component: 200  -  total flux cleaned = -0.000653927 Jy
! Total flux subtracted in 200 components = -0.000653927 Jy
! Clean residual min=-0.002624 max=0.003087 Jy/beam
! Clean residual mean=0.000001 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.317355 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.317355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056345Jy  sigma=1.259470
! Fit after  self-cal, rms=0.056345Jy  sigma=1.259411
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.5, -56.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311466 Jy
! Component: 100  -  total flux cleaned = 0.00499258 Jy
! Component: 150  -  total flux cleaned = 0.00634824 Jy
! Component: 200  -  total flux cleaned = 0.00736583 Jy
! Total flux subtracted in 200 components = 0.00736583 Jy
! Clean residual min=-0.002234 max=0.002132 Jy/beam
! Clean residual mean=-0.000001 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.324721 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 68 components and 0.324721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056160Jy  sigma=1.254246
! Fit after  self-cal, rms=0.056150Jy  sigma=1.253992
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056150Jy  sigma=1.253992
! Fit after  self-cal, rms=0.056136Jy  sigma=1.253618
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=7.107 mas, bpa=-5.216 degrees
! Estimated noise=0.427487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119013 Jy
! Component: 100  -  total flux cleaned = 0.00196761 Jy
! Component: 150  -  total flux cleaned = 0.00231377 Jy
! Component: 200  -  total flux cleaned = 0.00256169 Jy
! Total flux subtracted in 200 components = 0.00256169 Jy
! Clean residual min=-0.002102 max=0.002038 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.327283 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 82 components and 0.327283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056103Jy  sigma=1.252610
! Fit after  self-cal, rms=0.056100Jy  sigma=1.252560
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000407647 Jy
! Component: 100  -  total flux cleaned = 0.000580419 Jy
! Component: 150  -  total flux cleaned = 0.000756424 Jy
! Component: 200  -  total flux cleaned = 0.000864191 Jy
! Total flux subtracted in 200 components = 0.000864191 Jy
! Clean residual min=-0.002027 max=0.002002 Jy/beam
! Clean residual mean=-0.000001 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.328147 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 94 components and 0.328147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056088Jy  sigma=1.252203
! Fit after  self-cal, rms=0.056086Jy  sigma=1.252188
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056086Jy  sigma=1.252188
! Fit after  self-cal, rms=0.056101Jy  sigma=1.252063
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.134 mas, bmaj=9.99 mas, bpa=-3.339 degrees
! Estimated noise=0.530339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128168 Jy
! Component: 100  -  total flux cleaned = 0.00161087 Jy
! Component: 150  -  total flux cleaned = 0.00189195 Jy
! Component: 200  -  total flux cleaned = 0.00212973 Jy
! Total flux subtracted in 200 components = 0.00212973 Jy
! Clean residual min=-0.002294 max=0.002860 Jy/beam
! Clean residual mean=-0.000004 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.330277 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 104 components and 0.330277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056101Jy  sigma=1.251891
! Fit after  self-cal, rms=0.056096Jy  sigma=1.251797
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.5, -28.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00254008 Jy
! Component: 100  -  total flux cleaned = 0.0033424 Jy
! Component: 150  -  total flux cleaned = 0.00358743 Jy
! Component: 200  -  total flux cleaned = 0.00355029 Jy
! Total flux subtracted in 200 components = 0.00355029 Jy
! Clean residual min=-0.002137 max=0.001902 Jy/beam
! Clean residual mean=-0.000005 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.333827 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 136 components and 0.333827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056017Jy  sigma=1.249595
! Fit after  self-cal, rms=0.056015Jy  sigma=1.249538
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.383 mas, bmaj=7.109 mas, bpa=-5.218 degrees
! Estimated noise=0.427592 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.383 x 7.109 at -5.218 degrees (North through East)
! Clean map  min=-0.0018443  max=0.28989 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.859 mas, bmaj=6.263 mas, bpa=-5.853 degrees
! Estimated noise=0.560311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.223378 Jy
! Component: 100  -  total flux cleaned = 0.2758 Jy
! Component: 150  -  total flux cleaned = 0.295738 Jy
! Component: 200  -  total flux cleaned = 0.304942 Jy
! Total flux subtracted in 200 components = 0.304942 Jy
! Clean residual min=-0.003698 max=0.004265 Jy/beam
! Clean residual mean=-0.000005 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.304942 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.304942 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.383 mas, bmaj=7.109 mas, bpa=-5.218 degrees
! Estimated noise=0.427592 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.005792 Jy
! Component: 100  -  total flux cleaned = 0.00965641 Jy
! Component: 150  -  total flux cleaned = 0.0126459 Jy
! Component: 200  -  total flux cleaned = 0.0150761 Jy
! Total flux subtracted in 200 components = 0.0150761 Jy
! Clean residual min=-0.002508 max=0.002115 Jy/beam
! Clean residual mean=0.000001 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.320018 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 48 components and 0.320018 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.134 mas, bmaj=9.99 mas, bpa=-3.339 degrees
! Estimated noise=0.530339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00333727 Jy
! Component: 100  -  total flux cleaned = 0.00523585 Jy
! Component: 150  -  total flux cleaned = 0.00688671 Jy
! Component: 200  -  total flux cleaned = 0.00814056 Jy
! Total flux subtracted in 200 components = 0.00814056 Jy
! Clean residual min=-0.002242 max=0.002370 Jy/beam
! Clean residual mean=-0.000002 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.328159 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113387 Jy
! Component: 100  -  total flux cleaned = 0.00216171 Jy
! Component: 150  -  total flux cleaned = 0.00275085 Jy
! Component: 200  -  total flux cleaned = 0.00315783 Jy
! Total flux subtracted in 200 components = 0.00315783 Jy
! Clean residual min=-0.002143 max=0.002101 Jy/beam
! Clean residual mean=-0.000004 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.331317 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 136 components and 0.331317 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.383 mas, bmaj=7.109 mas, bpa=-5.218 degrees
! Estimated noise=0.427592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000560659 Jy
! Component: 100  -  total flux cleaned = 0.000845414 Jy
! Component: 150  -  total flux cleaned = 0.0010515 Jy
! Component: 200  -  total flux cleaned = 0.0012877 Jy
! Total flux subtracted in 200 components = 0.0012877 Jy
! Clean residual min=-0.001860 max=0.001861 Jy/beam
! Clean residual mean=-0.000002 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.332604 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 163 components and 0.332604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055980Jy  sigma=1.248885
! Fit after  self-cal, rms=0.055967Jy  sigma=1.248668
wmodel /J0019+2602_S_map.mod
! wmodel: Unable to open new model file: /J0019+2602_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0019+2602_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.383 x 7.109 at -5.218 degrees (North through East)
! Clean map  min=-0.0018049  max=0.29034 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0019+2602_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.290342 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000461722 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.477081 0.477081 0.954162 1.90832 3.81665 7.63329 15.2666 30.5332 61.0664
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.29 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  628.824 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0019+2602_S_dfm.log closed on Thu May 19 19:53:31 2016