! Started logfile: /scr/pima/bg219b_uvs/J0013+1910_X_dfm.log on Thu May 19 19:53:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0013+1910_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0013+1910_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.823457 visibilities/baseline/integration-bin.
! Found source: J0013+1910
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16008 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0013+1910_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008721Jy  sigma=24.892726
! Fit after  self-cal, rms=0.904521Jy  sigma=22.271553
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7254 mas, bmaj=1.649 mas, bpa=-4.809 degrees
! Estimated noise=0.40539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0725117 Jy
! Component: 100  -  total flux cleaned = 0.0928745 Jy
! Total flux subtracted in 100 components = 0.0928745 Jy
! Clean residual min=-0.004385 max=0.009053 Jy/beam
! Clean residual mean=-0.000006 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.0928745 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0928745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061870Jy  sigma=1.442508
! Fit after  self-cal, rms=0.061473Jy  sigma=1.431888
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109377 Jy
! Component: 100  -  total flux cleaned = 0.0167329 Jy
! Total flux subtracted in 100 components = 0.0167329 Jy
! Clean residual min=-0.003522 max=0.004787 Jy/beam
! Clean residual mean=-0.000004 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.109607 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.109607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059180Jy  sigma=1.370965
! Fit after  self-cal, rms=0.059127Jy  sigma=1.369336
! Inverting map 
! Added new window around map position (-0.8, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00505731 Jy
! Component: 100  -  total flux cleaned = 0.00807217 Jy
! Total flux subtracted in 100 components = 0.00807217 Jy
! Clean residual min=-0.003003 max=0.003099 Jy/beam
! Clean residual mean=-0.000003 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.11768 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.11768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058656Jy  sigma=1.357506
! Fit after  self-cal, rms=0.058618Jy  sigma=1.356541
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9094 mas, bmaj=1.879 mas, bpa=-2.483 degrees
! Estimated noise=0.250344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267452 Jy
! Component: 100  -  total flux cleaned = 0.00416271 Jy
! Component: 150  -  total flux cleaned = 0.00511938 Jy
! Component: 200  -  total flux cleaned = 0.00577292 Jy
! Total flux subtracted in 200 components = 0.00577292 Jy
! Clean residual min=-0.001882 max=0.001901 Jy/beam
! Clean residual mean=-0.000004 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.123453 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 44 components and 0.123453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058482Jy  sigma=1.353512
! Fit after  self-cal, rms=0.058472Jy  sigma=1.353126
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9094 x 1.879 at -2.483 degrees (North through East)
! Clean map  min=-0.0017283  max=0.093077 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.02     KP        0.96     
!   LA        1.00     MK        0.96     NL        0.99     OV        1.00     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        1.02     KP        0.98     
!   LA        1.02     MK        1.01     NL        1.06     OV        1.03     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.00     HN        1.08     KP        1.07     
!   LA        1.04     MK        1.00     NL        1.08     OV        1.01     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.98     KP        0.97     
!   LA        1.01     MK        1.05     NL        1.03     OV        1.03     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        1.03     
!   LA        0.97     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.08     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.98     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        0.98     KP        1.01     
!   LA        1.04     MK        0.98     NL        1.08     OV        1.02     
!   PT        1.01     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.02     KP        1.06     
!   LA        1.01     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.92     KP        1.00     
!   LA        0.97     MK        1.00     NL        0.97     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        1.00     KP        0.96     
!   LA        0.95     MK        1.03     NL        1.00     OV        0.97     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.96     KP        0.96     
!   LA        0.95     MK        0.99     NL        0.99     OV        0.97     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.93     HN        0.88     KP        0.99     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.98     
!   PT        0.91     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.058472Jy  sigma=1.353126
! Fit after  self-cal, rms=0.057528Jy  sigma=1.345026
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9134 mas, bmaj=1.888 mas, bpa=-2.655 degrees
! Estimated noise=0.250553 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.85665e-05 Jy
! Component: 100  -  total flux cleaned = -0.000122737 Jy
! Component: 150  -  total flux cleaned = -0.000267973 Jy
! Component: 200  -  total flux cleaned = -0.00033458 Jy
! Total flux subtracted in 200 components = -0.00033458 Jy
! Clean residual min=-0.001515 max=0.001533 Jy/beam
! Clean residual mean=-0.000003 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.123118 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.123118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057509Jy  sigma=1.344656
! Fit after  self-cal, rms=0.057506Jy  sigma=1.344459
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057506Jy  sigma=1.344459
! Fit after  self-cal, rms=0.057535Jy  sigma=1.340187
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9136 mas, bmaj=1.887 mas, bpa=-2.746 degrees
! Estimated noise=0.250434 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.12667e-05 Jy
! Component: 100  -  total flux cleaned = -0.000245988 Jy
! Component: 150  -  total flux cleaned = -0.000406422 Jy
! Component: 200  -  total flux cleaned = -0.000451702 Jy
! Total flux subtracted in 200 components = -0.000451702 Jy
! Clean residual min=-0.001483 max=0.001467 Jy/beam
! Clean residual mean=-0.000002 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.122666 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 0.122666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057523Jy  sigma=1.339934
! Fit after  self-cal, rms=0.057529Jy  sigma=1.339747
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 23.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105605 Jy
! Component: 100  -  total flux cleaned = 0.00107935 Jy
! Component: 150  -  total flux cleaned = 0.00111999 Jy
! Component: 200  -  total flux cleaned = 0.00119008 Jy
! Total flux subtracted in 200 components = 0.00119008 Jy
! Clean residual min=-0.001344 max=0.001449 Jy/beam
! Clean residual mean=-0.000003 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.123856 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 87 components and 0.123856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057499Jy  sigma=1.339022
! Fit after  self-cal, rms=0.057498Jy  sigma=1.338946
! Inverting map 
! Added new window around map position (-2, -30.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000625395 Jy
! Component: 100  -  total flux cleaned = 0.000707188 Jy
! Component: 150  -  total flux cleaned = 0.000780979 Jy
! Component: 200  -  total flux cleaned = 0.00078082 Jy
! Total flux subtracted in 200 components = 0.00078082 Jy
! Clean residual min=-0.001301 max=0.001194 Jy/beam
! Clean residual mean=-0.000003 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.124637 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 98 components and 0.124637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057461Jy  sigma=1.338198
! Fit after  self-cal, rms=0.057457Jy  sigma=1.338144
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057457Jy  sigma=1.338144
! Fit after  self-cal, rms=0.057360Jy  sigma=1.338066
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9143 mas, bmaj=1.886 mas, bpa=-2.708 degrees
! Estimated noise=0.25016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102333 Jy
! Component: 100  -  total flux cleaned = 1.92357e-05 Jy
! Component: 150  -  total flux cleaned = 1.44425e-06 Jy
! Component: 200  -  total flux cleaned = 2.38419e-06 Jy
! Total flux subtracted in 200 components = 2.38419e-06 Jy
! Clean residual min=-0.001245 max=0.001144 Jy/beam
! Clean residual mean=-0.000002 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.12464 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 103 components and 0.12464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057347Jy  sigma=1.337769
! Fit after  self-cal, rms=0.057345Jy  sigma=1.337750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.30388e-05 Jy
! Component: 100  -  total flux cleaned = -1.88217e-06 Jy
! Component: 150  -  total flux cleaned = -1.29595e-06 Jy
! Component: 200  -  total flux cleaned = -1.49224e-05 Jy
! Total flux subtracted in 200 components = -1.49224e-05 Jy
! Clean residual min=-0.001209 max=0.001140 Jy/beam
! Clean residual mean=-0.000003 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.124625 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 111 components and 0.124625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057338Jy  sigma=1.337575
! Fit after  self-cal, rms=0.057337Jy  sigma=1.337564
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057337Jy  sigma=1.337564
! Fit after  self-cal, rms=0.057281Jy  sigma=1.337539
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.057 mas, bmaj=2.872 mas, bpa=-2.206 degrees
! Estimated noise=0.311341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000792407 Jy
! Component: 100  -  total flux cleaned = -0.000824598 Jy
! Component: 150  -  total flux cleaned = -0.000824895 Jy
! Component: 200  -  total flux cleaned = -0.000845872 Jy
! Total flux subtracted in 200 components = -0.000845872 Jy
! Clean residual min=-0.001220 max=0.001135 Jy/beam
! Clean residual mean=-0.000006 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.123779 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 124 components and 0.123779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057283Jy  sigma=1.337476
! Fit after  self-cal, rms=0.057276Jy  sigma=1.337392
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.67951e-05 Jy
! Component: 100  -  total flux cleaned = -1.34624e-05 Jy
! Component: 150  -  total flux cleaned = -1.21718e-05 Jy
! Component: 200  -  total flux cleaned = -2.9258e-05 Jy
! Total flux subtracted in 200 components = -2.9258e-05 Jy
! Clean residual min=-0.001192 max=0.001131 Jy/beam
! Clean residual mean=-0.000006 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.123749 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 127 components and 0.123749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057277Jy  sigma=1.337353
! Fit after  self-cal, rms=0.057273Jy  sigma=1.337301
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9151 mas, bmaj=1.886 mas, bpa=-2.657 degrees
! Estimated noise=0.249965 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9151 x 1.886 at -2.657 degrees (North through East)
! Clean map  min=-0.001093  max=0.092986 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7284 mas, bmaj=1.65 mas, bpa=-4.938 degrees
! Estimated noise=0.404027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.072044 Jy
! Component: 100  -  total flux cleaned = 0.095783 Jy
! Component: 150  -  total flux cleaned = 0.10642 Jy
! Component: 200  -  total flux cleaned = 0.111931 Jy
! Total flux subtracted in 200 components = 0.111931 Jy
! Clean residual min=-0.002915 max=0.002948 Jy/beam
! Clean residual mean=-0.000003 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.111931 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.111931 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9151 mas, bmaj=1.886 mas, bpa=-2.657 degrees
! Estimated noise=0.249965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00403141 Jy
! Component: 100  -  total flux cleaned = 0.00639591 Jy
! Component: 150  -  total flux cleaned = 0.00815011 Jy
! Component: 200  -  total flux cleaned = 0.00913171 Jy
! Total flux subtracted in 200 components = 0.00913171 Jy
! Clean residual min=-0.001361 max=0.001248 Jy/beam
! Clean residual mean=-0.000004 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.121063 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 40 components and 0.121063 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.057 mas, bmaj=2.872 mas, bpa=-2.206 degrees
! Estimated noise=0.311341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141099 Jy
! Component: 100  -  total flux cleaned = 0.00187702 Jy
! Component: 150  -  total flux cleaned = 0.00218098 Jy
! Component: 200  -  total flux cleaned = 0.0023461 Jy
! Total flux subtracted in 200 components = 0.0023461 Jy
! Clean residual min=-0.001230 max=0.001106 Jy/beam
! Clean residual mean=-0.000007 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.123409 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.96947e-05 Jy
! Component: 100  -  total flux cleaned = 0.000142336 Jy
! Component: 150  -  total flux cleaned = 0.00018121 Jy
! Component: 200  -  total flux cleaned = 0.000238266 Jy
! Total flux subtracted in 200 components = 0.000238266 Jy
! Clean residual min=-0.001185 max=0.001129 Jy/beam
! Clean residual mean=-0.000006 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.123647 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 80 components and 0.123647 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9151 mas, bmaj=1.886 mas, bpa=-2.657 degrees
! Estimated noise=0.249965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000130225 Jy
! Component: 100  -  total flux cleaned = -1.89973e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102103 Jy
! Component: 200  -  total flux cleaned = 0.000167749 Jy
! Total flux subtracted in 200 components = 0.000167749 Jy
! Clean residual min=-0.001171 max=0.001228 Jy/beam
! Clean residual mean=-0.000003 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.123815 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.123815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057288Jy  sigma=1.337756
! Fit after  self-cal, rms=0.057277Jy  sigma=1.337574
wmodel /J0013+1910_X_map.mod
! wmodel: Unable to open new model file: /J0013+1910_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0013+1910_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9151 x 1.886 at -2.657 degrees (North through East)
! Clean map  min=-0.0011118  max=0.092689 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0013+1910_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0926888 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000292842 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.947823 0.947823 1.89565 3.79129 7.58259 15.1652 30.3303 60.6607
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  316.514 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0013+1910_X_dfm.log closed on Thu May 19 19:53:27 2016