! Started logfile: /scr/pima/bg219b_uvs/J0010+1058_X_dfm.log on Thu May 19 19:53:09 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0010+1058_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0010+1058_X_uva.fits
! AN table 1: 18 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.817284 visibilities/baseline/integration-bin.
! Found source: J0010+1058
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 7944 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0010+1058_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022607Jy  sigma=23.653102
! Fit after  self-cal, rms=0.822683Jy  sigma=19.019250
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7242 mas, bmaj=1.694 mas, bpa=-3.946 degrees
! Estimated noise=0.559393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137753 Jy
! Component: 100  -  total flux cleaned = 0.167812 Jy
! Total flux subtracted in 100 components = 0.167812 Jy
! Clean residual min=-0.004320 max=0.008761 Jy/beam
! Clean residual mean=-0.000002 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.167812 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.167812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066428Jy  sigma=1.421757
! Fit after  self-cal, rms=0.066358Jy  sigma=1.420894
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00895218 Jy
! Component: 100  -  total flux cleaned = 0.0139021 Jy
! Total flux subtracted in 100 components = 0.0139021 Jy
! Clean residual min=-0.003634 max=0.003786 Jy/beam
! Clean residual mean=-0.000000 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.181714 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 18 components and 0.181714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064749Jy  sigma=1.382726
! Fit after  self-cal, rms=0.064749Jy  sigma=1.382572
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8921 mas, bmaj=2.024 mas, bpa=-3.388 degrees
! Estimated noise=0.380913 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0044082 Jy
! Component: 100  -  total flux cleaned = 0.00686607 Jy
! Component: 150  -  total flux cleaned = 0.008463 Jy
! Component: 200  -  total flux cleaned = 0.00951307 Jy
! Total flux subtracted in 200 components = 0.00951307 Jy
! Clean residual min=-0.003047 max=0.002837 Jy/beam
! Clean residual mean=-0.000001 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.191227 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 37 components and 0.191227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064403Jy  sigma=1.375962
! Fit after  self-cal, rms=0.064411Jy  sigma=1.375927
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8921 x 2.024 at -3.388 degrees (North through East)
! Clean map  min=-0.0028284  max=0.17795 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.07     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        1.06     KP        1.00     
!   LA        1.04     MK        1.02     NL        1.07     OV        1.03     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.05     KP        1.04     
!   LA        1.06     MK        1.01     NL        1.10     OV        1.04     
!   PT        0.98     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.06     KP        0.97     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        1.02     
!   LA        1.03     MK        0.96     NL        1.00     OV        0.96     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.03     KP        1.03     
!   LA        0.99     MK        1.00     NL        1.09     OV        1.00     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.07     KP        1.01     
!   LA        1.05     MK        1.04     NL        1.04     OV        1.06     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.04     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.04     OV        0.98     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.98     KP        0.95     
!   LA        1.00     MK        1.04     NL        0.98     OV        1.00     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.99     KP        0.99     
!   LA        0.97     MK        0.97     NL        1.03     OV        0.96     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.01     KP        0.94     
!   LA        0.97     MK        1.02     NL        1.01     OV        0.97     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        0.91     KP        0.99     
!   LA        0.97     MK        0.98     NL        0.99     OV        0.93     
!   PT        0.86     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.064411Jy  sigma=1.375927
! Fit after  self-cal, rms=0.063245Jy  sigma=1.349407
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8953 mas, bmaj=2.028 mas, bpa=-3.316 degrees
! Estimated noise=0.381775 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000349609 Jy
! Component: 100  -  total flux cleaned = -0.000370825 Jy
! Component: 150  -  total flux cleaned = -0.000336868 Jy
! Component: 200  -  total flux cleaned = -0.000304242 Jy
! Total flux subtracted in 200 components = -0.000304242 Jy
! Clean residual min=-0.002360 max=0.002305 Jy/beam
! Clean residual mean=0.000000 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.190923 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 44 components and 0.190923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063233Jy  sigma=1.349089
! Fit after  self-cal, rms=0.063242Jy  sigma=1.349010
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063242Jy  sigma=1.349010
! Fit after  self-cal, rms=0.062820Jy  sigma=1.341019
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8957 mas, bmaj=2.026 mas, bpa=-3.406 degrees
! Estimated noise=0.381623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129438 Jy
! Component: 100  -  total flux cleaned = -0.000164765 Jy
! Component: 150  -  total flux cleaned = -0.000196071 Jy
! Component: 200  -  total flux cleaned = -0.000224022 Jy
! Total flux subtracted in 200 components = -0.000224022 Jy
! Clean residual min=-0.002315 max=0.002286 Jy/beam
! Clean residual mean=0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.190699 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 45 components and 0.190699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062810Jy  sigma=1.340808
! Fit after  self-cal, rms=0.062814Jy  sigma=1.340756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.00152e-05 Jy
! Component: 100  -  total flux cleaned = -4.15825e-05 Jy
! Component: 150  -  total flux cleaned = -6.02475e-05 Jy
! Component: 200  -  total flux cleaned = -6.91644e-05 Jy
! Total flux subtracted in 200 components = -6.91644e-05 Jy
! Clean residual min=-0.002306 max=0.002300 Jy/beam
! Clean residual mean=0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.19063 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.19063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062810Jy  sigma=1.340696
! Fit after  self-cal, rms=0.062810Jy  sigma=1.340693
! Inverting map 
! Added new window around map position (0.6, -23).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100095 Jy
! Component: 100  -  total flux cleaned = 0.000947418 Jy
! Component: 150  -  total flux cleaned = 0.000838371 Jy
! Component: 200  -  total flux cleaned = 0.000717292 Jy
! Total flux subtracted in 200 components = 0.000717292 Jy
! Clean residual min=-0.002287 max=0.002101 Jy/beam
! Clean residual mean=0.000001 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.191347 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 61 components and 0.191347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062733Jy  sigma=1.338925
! Fit after  self-cal, rms=0.062725Jy  sigma=1.338780
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062725Jy  sigma=1.338780
! Fit after  self-cal, rms=0.062807Jy  sigma=1.338696
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8967 mas, bmaj=2.027 mas, bpa=-3.347 degrees
! Estimated noise=0.381602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229851 Jy
! Component: 100  -  total flux cleaned = 0.00020145 Jy
! Component: 150  -  total flux cleaned = 0.000246415 Jy
! Component: 200  -  total flux cleaned = 0.000266957 Jy
! Total flux subtracted in 200 components = 0.000266957 Jy
! Clean residual min=-0.002158 max=0.002095 Jy/beam
! Clean residual mean=0.000001 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.191614 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.191614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062787Jy  sigma=1.338257
! Fit after  self-cal, rms=0.062787Jy  sigma=1.338232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.04933e-05 Jy
! Component: 100  -  total flux cleaned = 5.2523e-05 Jy
! Component: 150  -  total flux cleaned = 7.0202e-05 Jy
! Component: 200  -  total flux cleaned = 5.34554e-05 Jy
! Total flux subtracted in 200 components = 5.34554e-05 Jy
! Clean residual min=-0.002172 max=0.002089 Jy/beam
! Clean residual mean=0.000001 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.191667 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 72 components and 0.191667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062778Jy  sigma=1.338016
! Fit after  self-cal, rms=0.062777Jy  sigma=1.338011
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062777Jy  sigma=1.338011
! Fit after  self-cal, rms=0.062835Jy  sigma=1.337989
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.094 mas, bmaj=3.057 mas, bpa=-5.426 degrees
! Estimated noise=0.476636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117125 Jy
! Component: 100  -  total flux cleaned = -0.000105333 Jy
! Component: 150  -  total flux cleaned = -6.47889e-05 Jy
! Component: 200  -  total flux cleaned = -3.79739e-05 Jy
! Total flux subtracted in 200 components = -3.79739e-05 Jy
! Clean residual min=-0.002035 max=0.002263 Jy/beam
! Clean residual mean=0.000002 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.191629 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 80 components and 0.191629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062832Jy  sigma=1.337996
! Fit after  self-cal, rms=0.062832Jy  sigma=1.337982
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.14165e-05 Jy
! Component: 100  -  total flux cleaned = -1.23922e-05 Jy
! Component: 150  -  total flux cleaned = -4.90895e-06 Jy
! Component: 200  -  total flux cleaned = 9.55202e-06 Jy
! Total flux subtracted in 200 components = 9.55202e-06 Jy
! Clean residual min=-0.002057 max=0.002270 Jy/beam
! Clean residual mean=0.000002 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.191639 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 86 components and 0.191639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062832Jy  sigma=1.338002
! Fit after  self-cal, rms=0.062832Jy  sigma=1.337995
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8966 mas, bmaj=2.027 mas, bpa=-3.325 degrees
! Estimated noise=0.381778 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8966 x 2.027 at -3.325 degrees (North through East)
! Clean map  min=-0.0019551  max=0.17825 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7263 mas, bmaj=1.696 mas, bpa=-3.885 degrees
! Estimated noise=0.561343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.138204 Jy
! Component: 100  -  total flux cleaned = 0.168355 Jy
! Component: 150  -  total flux cleaned = 0.177053 Jy
! Component: 200  -  total flux cleaned = 0.181786 Jy
! Total flux subtracted in 200 components = 0.181786 Jy
! Clean residual min=-0.003160 max=0.003213 Jy/beam
! Clean residual mean=-0.000000 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.181786 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.181786 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8966 mas, bmaj=2.027 mas, bpa=-3.325 degrees
! Estimated noise=0.381778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00417842 Jy
! Component: 100  -  total flux cleaned = 0.00636211 Jy
! Component: 150  -  total flux cleaned = 0.00706611 Jy
! Component: 200  -  total flux cleaned = 0.00755035 Jy
! Total flux subtracted in 200 components = 0.00755035 Jy
! Clean residual min=-0.002431 max=0.001992 Jy/beam
! Clean residual mean=-0.000001 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.189336 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.189336 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.094 mas, bmaj=3.057 mas, bpa=-5.426 degrees
! Estimated noise=0.476636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110916 Jy
! Component: 100  -  total flux cleaned = 0.00143925 Jy
! Component: 150  -  total flux cleaned = 0.00156342 Jy
! Component: 200  -  total flux cleaned = 0.0016484 Jy
! Total flux subtracted in 200 components = 0.0016484 Jy
! Clean residual min=-0.001936 max=0.002294 Jy/beam
! Clean residual mean=0.000001 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.190985 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.61153e-05 Jy
! Component: 100  -  total flux cleaned = 0.00012285 Jy
! Component: 150  -  total flux cleaned = 0.000181041 Jy
! Component: 200  -  total flux cleaned = 0.00022014 Jy
! Total flux subtracted in 200 components = 0.00022014 Jy
! Clean residual min=-0.001995 max=0.002299 Jy/beam
! Clean residual mean=0.000001 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.191205 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 62 components and 0.191205 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8966 mas, bmaj=2.027 mas, bpa=-3.325 degrees
! Estimated noise=0.381778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.73347e-05 Jy
! Component: 100  -  total flux cleaned = -0.000196193 Jy
! Component: 150  -  total flux cleaned = -0.000360637 Jy
! Component: 200  -  total flux cleaned = -0.000465989 Jy
! Total flux subtracted in 200 components = -0.000465989 Jy
! Clean residual min=-0.002195 max=0.002059 Jy/beam
! Clean residual mean=0.000000 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.190739 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.190739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062855Jy  sigma=1.338368
! Fit after  self-cal, rms=0.062851Jy  sigma=1.338347
wmodel /J0010+1058_X_map.mod
! wmodel: Unable to open new model file: /J0010+1058_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0010+1058_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8966 x 2.027 at -3.325 degrees (North through East)
! Clean map  min=-0.0019716  max=0.17863 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0010+1058_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.178628 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000481288 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.808308 0.808308 1.61662 3.23323 6.46647 12.9329 25.8659 51.7317
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.178 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  371.145 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0010+1058_X_dfm.log closed on Thu May 19 19:53:11 2016