! Started logfile: /scr/pima/bg219b_uvs/J0008+1144_X_uvs.log on Thu Apr  7 01:37:15 2016
obs /scr/pima/bg219b_uvs/J0008+1144_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0008+1144_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.792982 visibilities/baseline/integration-bin.
! Found source: J0008+1144
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24408 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J0008+1144_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.007274Jy  sigma=25.475174
! Fit after  self-cal, rms=0.903456Jy  sigma=22.730619
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7531 mas, bmaj=1.718 mas, bpa=-2.381 degrees
! Estimated noise=0.410726 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0720366 Jy
! Component: 100  -  total flux cleaned = 0.104369 Jy
! Total flux subtracted in 100 components = 0.104369 Jy
! Clean residual min=-0.004858 max=0.015086 Jy/beam
! Clean residual mean=-0.000008 rms=0.001618 Jy/beam
! Combined flux in latest and established models = 0.104369 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.104369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064650Jy  sigma=1.574245
! Fit after  self-cal, rms=0.063096Jy  sigma=1.541830
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0188824 Jy
! Component: 100  -  total flux cleaned = 0.0285922 Jy
! Total flux subtracted in 100 components = 0.0285922 Jy
! Clean residual min=-0.002805 max=0.005543 Jy/beam
! Clean residual mean=-0.000004 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.132961 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 10 components and 0.132961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056284Jy  sigma=1.354861
! Fit after  self-cal, rms=0.056161Jy  sigma=1.352732
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580708 Jy
! Component: 100  -  total flux cleaned = 0.00902749 Jy
! Total flux subtracted in 100 components = 0.00902749 Jy
! Clean residual min=-0.002551 max=0.003762 Jy/beam
! Clean residual mean=-0.000003 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.141988 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 16 components and 0.141988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055393Jy  sigma=1.331556
! Fit after  self-cal, rms=0.055368Jy  sigma=1.331084
! Inverting map 
! Added new window around map position (1.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00337989 Jy
! Component: 100  -  total flux cleaned = 0.00510754 Jy
! Total flux subtracted in 100 components = 0.00510754 Jy
! Clean residual min=-0.002553 max=0.002566 Jy/beam
! Clean residual mean=-0.000003 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.147096 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 22 components and 0.147096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055125Jy  sigma=1.324706
! Fit after  self-cal, rms=0.055069Jy  sigma=1.323475
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9112 mas, bmaj=1.967 mas, bpa=-2.903 degrees
! Estimated noise=0.242044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.003083 Jy
! Component: 100  -  total flux cleaned = 0.00502462 Jy
! Component: 150  -  total flux cleaned = 0.00644835 Jy
! Component: 200  -  total flux cleaned = 0.00752982 Jy
! Total flux subtracted in 200 components = 0.00752982 Jy
! Clean residual min=-0.001802 max=0.001632 Jy/beam
! Clean residual mean=-0.000006 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.154626 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 49 components and 0.154626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054863Jy  sigma=1.318148
! Fit after  self-cal, rms=0.054848Jy  sigma=1.317697
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9112 x 1.967 at -2.903 degrees (North through East)
! Clean map  min=-0.0016504  max=0.095867 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.97     
!   LA        0.97     MK        0.98     NL        1.01     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.01     KP        0.97     
!   LA        1.00     MK        1.04     NL        1.04     OV        1.02     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.03     KP        1.03     
!   LA        1.03     MK        1.00     NL        1.06     OV        1.03     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.99     KP        0.98     
!   LA        0.97     MK        0.96     NL        0.98     OV        1.01     
!   PT        0.95     SC        0.95     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.99     KP        0.99     
!   LA        0.98     MK        0.95     NL        1.03     OV        1.01     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.01     KP        1.02     
!   LA        0.98     MK        1.05     NL        1.03     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.98     KP        0.97     
!   LA        0.96     MK        1.00     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054848Jy  sigma=1.317697
! Fit after  self-cal, rms=0.054424Jy  sigma=1.312082
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9114 mas, bmaj=1.971 mas, bpa=-2.906 degrees
! Estimated noise=0.240759 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000410731 Jy
! Component: 100  -  total flux cleaned = 0.000490342 Jy
! Component: 150  -  total flux cleaned = 0.000510733 Jy
! Component: 200  -  total flux cleaned = 0.000547062 Jy
! Total flux subtracted in 200 components = 0.000547062 Jy
! Clean residual min=-0.001489 max=0.001467 Jy/beam
! Clean residual mean=-0.000003 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.155173 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 61 components and 0.155173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054404Jy  sigma=1.311615
! Fit after  self-cal, rms=0.054404Jy  sigma=1.311539
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054404Jy  sigma=1.311539
! Fit after  self-cal, rms=0.054372Jy  sigma=1.309080
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9096 mas, bmaj=1.961 mas, bpa=-2.888 degrees
! Estimated noise=0.240183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000179327 Jy
! Component: 100  -  total flux cleaned = -0.000132133 Jy
! Component: 150  -  total flux cleaned = -0.000104109 Jy
! Component: 200  -  total flux cleaned = -7.84563e-05 Jy
! Total flux subtracted in 200 components = -7.84563e-05 Jy
! Clean residual min=-0.001338 max=0.001273 Jy/beam
! Clean residual mean=-0.000003 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.155094 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 76 components and 0.155094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054362Jy  sigma=1.308897
! Fit after  self-cal, rms=0.054369Jy  sigma=1.308851
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.7708e-06 Jy
! Component: 100  -  total flux cleaned = 5.10118e-05 Jy
! Component: 150  -  total flux cleaned = 8.37158e-05 Jy
! Component: 200  -  total flux cleaned = 0.000114461 Jy
! Total flux subtracted in 200 components = 0.000114461 Jy
! Clean residual min=-0.001335 max=0.001280 Jy/beam
! Clean residual mean=-0.000003 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.155209 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 0.155209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054365Jy  sigma=1.308761
! Fit after  self-cal, rms=0.054365Jy  sigma=1.308756
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054365Jy  sigma=1.308756
! Fit after  self-cal, rms=0.054433Jy  sigma=1.308697
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9106 mas, bmaj=1.96 mas, bpa=-2.781 degrees
! Estimated noise=0.240299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126502 Jy
! Component: 100  -  total flux cleaned = -9.49099e-05 Jy
! Component: 150  -  total flux cleaned = -7.54519e-05 Jy
! Component: 200  -  total flux cleaned = -5.75156e-05 Jy
! Total flux subtracted in 200 components = -5.75156e-05 Jy
! Clean residual min=-0.001335 max=0.001267 Jy/beam
! Clean residual mean=-0.000003 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.155151 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 89 components and 0.155151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054429Jy  sigma=1.308625
! Fit after  self-cal, rms=0.054430Jy  sigma=1.308621
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.51034e-05 Jy
! Component: 100  -  total flux cleaned = 3.37625e-05 Jy
! Component: 150  -  total flux cleaned = 4.20147e-05 Jy
! Component: 200  -  total flux cleaned = 4.99628e-05 Jy
! Total flux subtracted in 200 components = 4.99628e-05 Jy
! Clean residual min=-0.001333 max=0.001274 Jy/beam
! Clean residual mean=-0.000003 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.155201 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 93 components and 0.155201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054428Jy  sigma=1.308572
! Fit after  self-cal, rms=0.054428Jy  sigma=1.308573
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054428Jy  sigma=1.308573
! Fit after  self-cal, rms=0.054445Jy  sigma=1.308503
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.098 mas, bmaj=2.963 mas, bpa=-5.241 degrees
! Estimated noise=0.303763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.31445e-05 Jy
! Component: 100  -  total flux cleaned = 6.44855e-05 Jy
! Component: 150  -  total flux cleaned = 8.21357e-05 Jy
! Component: 200  -  total flux cleaned = 7.43611e-05 Jy
! Total flux subtracted in 200 components = 7.43611e-05 Jy
! Clean residual min=-0.001642 max=0.001735 Jy/beam
! Clean residual mean=-0.000006 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.155276 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 103 components and 0.155276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054447Jy  sigma=1.308531
! Fit after  self-cal, rms=0.054446Jy  sigma=1.308515
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.4, 35.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163288 Jy
! Component: 100  -  total flux cleaned = 0.00215572 Jy
! Component: 150  -  total flux cleaned = 0.0025853 Jy
! Component: 200  -  total flux cleaned = 0.00288699 Jy
! Total flux subtracted in 200 components = 0.00288699 Jy
! Clean residual min=-0.001394 max=0.001405 Jy/beam
! Clean residual mean=-0.000003 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.158163 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 128 components and 0.158163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054412Jy  sigma=1.307660
! Fit after  self-cal, rms=0.054409Jy  sigma=1.307568
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9113 mas, bmaj=1.958 mas, bpa=-2.666 degrees
! Estimated noise=0.240303 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9113 x 1.958 at -2.666 degrees (North through East)
! Clean map  min=-0.0011145  max=0.095364 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.751 mas, bmaj=1.705 mas, bpa=-2.189 degrees
! Estimated noise=0.406346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0725073 Jy
! Component: 100  -  total flux cleaned = 0.106127 Jy
! Component: 150  -  total flux cleaned = 0.123614 Jy
! Component: 200  -  total flux cleaned = 0.133133 Jy
! Total flux subtracted in 200 components = 0.133133 Jy
! Clean residual min=-0.002729 max=0.004760 Jy/beam
! Clean residual mean=-0.000004 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.133133 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.133133 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9113 mas, bmaj=1.958 mas, bpa=-2.666 degrees
! Estimated noise=0.240303 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00749097 Jy
! Component: 100  -  total flux cleaned = 0.0116632 Jy
! Component: 150  -  total flux cleaned = 0.0144043 Jy
! Component: 200  -  total flux cleaned = 0.0163966 Jy
! Total flux subtracted in 200 components = 0.0163966 Jy
! Clean residual min=-0.001441 max=0.001440 Jy/beam
! Clean residual mean=-0.000005 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.14953 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 48 components and 0.14953 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.098 mas, bmaj=2.963 mas, bpa=-5.241 degrees
! Estimated noise=0.303763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243817 Jy
! Component: 100  -  total flux cleaned = 0.00408605 Jy
! Component: 150  -  total flux cleaned = 0.00535557 Jy
! Component: 200  -  total flux cleaned = 0.00635779 Jy
! Total flux subtracted in 200 components = 0.00635779 Jy
! Clean residual min=-0.001490 max=0.001277 Jy/beam
! Clean residual mean=-0.000006 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.155888 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00079944 Jy
! Component: 100  -  total flux cleaned = 0.00125133 Jy
! Component: 150  -  total flux cleaned = 0.00159458 Jy
! Component: 200  -  total flux cleaned = 0.0019154 Jy
! Total flux subtracted in 200 components = 0.0019154 Jy
! Clean residual min=-0.001320 max=0.001323 Jy/beam
! Clean residual mean=-0.000004 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.157803 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 118 components and 0.157803 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9113 mas, bmaj=1.958 mas, bpa=-2.666 degrees
! Estimated noise=0.240303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0005704 Jy
! Component: 100  -  total flux cleaned = 0.00059558 Jy
! Component: 150  -  total flux cleaned = 0.000665063 Jy
! Component: 200  -  total flux cleaned = 0.00068609 Jy
! Total flux subtracted in 200 components = 0.00068609 Jy
! Clean residual min=-0.001151 max=0.001120 Jy/beam
! Clean residual mean=-0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.158489 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 146 components and 0.158489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054403Jy  sigma=1.307476
! Fit after  self-cal, rms=0.054395Jy  sigma=1.307319
wmodel /scr/pima/bg219b_uvs/J0008+1144_X_map.mod
! Writing 146 model components to file: /scr/pima/bg219b_uvs/J0008+1144_X_map.mod
wobs /scr/pima/bg219b_uvs/J0008+1144_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J0008+1144_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J0008+1144_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219b_uvs/J0008+1144_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000205744 Jy
! Component: 100  -  total flux cleaned = -0.000361191 Jy
! Component: 150  -  total flux cleaned = -0.000490432 Jy
! Component: 200  -  total flux cleaned = -0.000614061 Jy
! Component: 250  -  total flux cleaned = -0.00071664 Jy
! Component: 300  -  total flux cleaned = -0.000849003 Jy
! Component: 350  -  total flux cleaned = -0.000977352 Jy
! Component: 400  -  total flux cleaned = -0.00108635 Jy
! Component: 450  -  total flux cleaned = -0.00116271 Jy
! Component: 500  -  total flux cleaned = -0.00125172 Jy
! Component: 550  -  total flux cleaned = -0.00130977 Jy
! Component: 600  -  total flux cleaned = -0.00132421 Jy
! Component: 650  -  total flux cleaned = -0.00136675 Jy
! Component: 700  -  total flux cleaned = -0.00140803 Jy
! Component: 750  -  total flux cleaned = -0.00144826 Jy
! Component: 800  -  total flux cleaned = -0.00143494 Jy
! Component: 850  -  total flux cleaned = -0.00144815 Jy
! Component: 900  -  total flux cleaned = -0.0014739 Jy
! Component: 950  -  total flux cleaned = -0.00149921 Jy
! Component: 1000  -  total flux cleaned = -0.00151157 Jy
! Component: 1050  -  total flux cleaned = -0.00148727 Jy
! Component: 1100  -  total flux cleaned = -0.00154796 Jy
! Component: 1150  -  total flux cleaned = -0.00155986 Jy
! Component: 1200  -  total flux cleaned = -0.00157163 Jy
! Component: 1250  -  total flux cleaned = -0.00157174 Jy
! Component: 1300  -  total flux cleaned = -0.00162906 Jy
! Component: 1350  -  total flux cleaned = -0.00159495 Jy
! Component: 1400  -  total flux cleaned = -0.00162852 Jy
! Component: 1450  -  total flux cleaned = -0.00160617 Jy
! Component: 1500  -  total flux cleaned = -0.00159533 Jy
! Component: 1550  -  total flux cleaned = -0.00163863 Jy
! Component: 1600  -  total flux cleaned = -0.00161745 Jy
! Component: 1650  -  total flux cleaned = -0.00162803 Jy
! Component: 1700  -  total flux cleaned = -0.00168005 Jy
! Component: 1750  -  total flux cleaned = -0.00166967 Jy
! Component: 1800  -  total flux cleaned = -0.00171068 Jy
! Component: 1850  -  total flux cleaned = -0.001751 Jy
! Component: 1900  -  total flux cleaned = -0.00174098 Jy
! Component: 1950  -  total flux cleaned = -0.0017508 Jy
! Component: 2000  -  total flux cleaned = -0.00172136 Jy
! Component: 2050  -  total flux cleaned = -0.00175047 Jy
! Component: 2100  -  total flux cleaned = -0.00173136 Jy
! Component: 2150  -  total flux cleaned = -0.00174102 Jy
! Component: 2200  -  total flux cleaned = -0.00178828 Jy
! Component: 2250  -  total flux cleaned = -0.0017882 Jy
! Component: 2300  -  total flux cleaned = -0.00181591 Jy
! Component: 2350  -  total flux cleaned = -0.00181592 Jy
! Component: 2400  -  total flux cleaned = -0.00181596 Jy
! Component: 2450  -  total flux cleaned = -0.00183409 Jy
! Component: 2500  -  total flux cleaned = -0.00183414 Jy
! Component: 2550  -  total flux cleaned = -0.00186975 Jy
! Component: 2600  -  total flux cleaned = -0.00188736 Jy
! Component: 2650  -  total flux cleaned = -0.00187867 Jy
! Component: 2700  -  total flux cleaned = -0.001922 Jy
! Component: 2750  -  total flux cleaned = -0.00193922 Jy
! Component: 2800  -  total flux cleaned = -0.00194775 Jy
! Component: 2850  -  total flux cleaned = -0.00194779 Jy
! Component: 2900  -  total flux cleaned = -0.00198972 Jy
! Component: 2950  -  total flux cleaned = -0.00200635 Jy
! Component: 3000  -  total flux cleaned = -0.00208074 Jy
! Component: 3050  -  total flux cleaned = -0.00204793 Jy
! Component: 3100  -  total flux cleaned = -0.00208874 Jy
! Component: 3150  -  total flux cleaned = -0.00210492 Jy
! Component: 3200  -  total flux cleaned = -0.00213709 Jy
! Component: 3250  -  total flux cleaned = -0.00216111 Jy
! Component: 3300  -  total flux cleaned = -0.00217698 Jy
! Component: 3350  -  total flux cleaned = -0.0022006 Jy
! Component: 3400  -  total flux cleaned = -0.00220839 Jy
! Component: 3450  -  total flux cleaned = -0.00226311 Jy
! Component: 3500  -  total flux cleaned = -0.00226304 Jy
! Component: 3550  -  total flux cleaned = -0.00229387 Jy
! Component: 3600  -  total flux cleaned = -0.00233995 Jy
! Component: 3650  -  total flux cleaned = -0.00235515 Jy
! Component: 3700  -  total flux cleaned = -0.00234755 Jy
! Component: 3750  -  total flux cleaned = -0.0023626 Jy
! Component: 3800  -  total flux cleaned = -0.00240768 Jy
! Component: 3850  -  total flux cleaned = -0.00247482 Jy
! Component: 3900  -  total flux cleaned = -0.00251193 Jy
! Component: 3950  -  total flux cleaned = -0.00252664 Jy
! Component: 4000  -  total flux cleaned = -0.00254139 Jy
! Component: 4050  -  total flux cleaned = -0.00259261 Jy
! Total flux subtracted in 4096 components = -0.00262909 Jy
! Clean residual min=-0.000503 max=0.000455 Jy/beam
! Clean residual mean=-0.000000 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.15586 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 430 components and 0.15586 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J0008+1144_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9113 x 1.958 at -2.666 degrees (North through East)
! Clean map  min=-0.00071036  max=0.095231 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0008+1144_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0952306 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000119152 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.375358 0.375358 0.750717 1.50143 3.00287 6.00573 12.0115 24.0229 48.0459 96.0918
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.095 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  799.236 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0008+1144_X_uvs.log closed on Thu Apr  7 01:37:20 2016