! Started logfile: /scr/pima/bg219b_uvs/J0006+1235_X_uvs.log on Thu Apr  7 01:37:10 2016
obs /scr/pima/bg219b_uvs/J0006+1235_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0006+1235_X_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.836905 visibilities/baseline/integration-bin.
! Found source: J0006+1235
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25308 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J0006+1235_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.021751Jy  sigma=25.238141
! Fit after  self-cal, rms=0.826266Jy  sigma=20.347655
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7259 mas, bmaj=1.797 mas, bpa=-4.855 degrees
! Estimated noise=0.393986 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133077 Jy
! Component: 100  -  total flux cleaned = 0.197176 Jy
! Total flux subtracted in 100 components = 0.197176 Jy
! Clean residual min=-0.015106 max=0.035208 Jy/beam
! Clean residual mean=-0.000020 rms=0.004525 Jy/beam
! Combined flux in latest and established models = 0.197176 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.197176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.096675Jy  sigma=2.353860
! Fit after  self-cal, rms=0.091967Jy  sigma=2.248845
! Inverting map 
! Added new window around map position (-0.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0465498 Jy
! Component: 100  -  total flux cleaned = 0.0704112 Jy
! Total flux subtracted in 100 components = 0.0704112 Jy
! Clean residual min=-0.007355 max=0.011287 Jy/beam
! Clean residual mean=-0.000008 rms=0.001791 Jy/beam
! Combined flux in latest and established models = 0.267587 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 0.267587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063224Jy  sigma=1.505983
! Fit after  self-cal, rms=0.061846Jy  sigma=1.474258
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151555 Jy
! Component: 100  -  total flux cleaned = 0.0226989 Jy
! Total flux subtracted in 100 components = 0.0226989 Jy
! Clean residual min=-0.003778 max=0.005545 Jy/beam
! Clean residual mean=-0.000005 rms=0.000918 Jy/beam
! Combined flux in latest and established models = 0.290286 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 11 components and 0.290286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057997Jy  sigma=1.372797
! Fit after  self-cal, rms=0.057856Jy  sigma=1.369580
! Inverting map 
! Added new window around map position (6.6, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00587049 Jy
! Component: 100  -  total flux cleaned = 0.00952485 Jy
! Total flux subtracted in 100 components = 0.00952485 Jy
! Clean residual min=-0.003010 max=0.003010 Jy/beam
! Clean residual mean=-0.000004 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.299811 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.299811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057259Jy  sigma=1.353839
! Fit after  self-cal, rms=0.057222Jy  sigma=1.353046
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.88 mas, bmaj=2.087 mas, bpa=-5.489 degrees
! Estimated noise=0.239475 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00343434 Jy
! Component: 100  -  total flux cleaned = 0.00592242 Jy
! Component: 150  -  total flux cleaned = 0.00778693 Jy
! Component: 200  -  total flux cleaned = 0.00922063 Jy
! Total flux subtracted in 200 components = 0.00922063 Jy
! Clean residual min=-0.002098 max=0.003253 Jy/beam
! Clean residual mean=-0.000009 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.309032 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 39 components and 0.309032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056943Jy  sigma=1.346193
! Fit after  self-cal, rms=0.056934Jy  sigma=1.345910
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.88 x 2.087 at -5.489 degrees (North through East)
! Clean map  min=-0.0019365  max=0.16686 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.99     KP        0.96     
!   LA        0.98     MK        0.95     NL        1.01     OV        0.98     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.00     KP        0.99     
!   LA        1.00     MK        0.98     NL        1.03     OV        1.02     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.03     KP        1.02     
!   LA        1.02     MK        1.02     NL        1.05     OV        1.02     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.99     KP        0.99     
!   LA        0.98     MK        0.97     NL        1.01     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.97     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.04     OV        1.01     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        1.02     
!   LA        1.01     MK        1.00     NL        1.03     OV        1.01     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.97     KP        0.99     
!   LA        0.96     MK        1.03     NL        1.02     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056934Jy  sigma=1.345910
! Fit after  self-cal, rms=0.056216Jy  sigma=1.329594
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8814 mas, bmaj=2.093 mas, bpa=-5.55 degrees
! Estimated noise=0.238893 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.6, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00278807 Jy
! Component: 100  -  total flux cleaned = 0.00412317 Jy
! Component: 150  -  total flux cleaned = 0.00496415 Jy
! Component: 200  -  total flux cleaned = 0.00559437 Jy
! Total flux subtracted in 200 components = 0.00559437 Jy
! Clean residual min=-0.001754 max=0.001626 Jy/beam
! Clean residual mean=-0.000002 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.314626 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 62 components and 0.314626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056060Jy  sigma=1.325711
! Fit after  self-cal, rms=0.056047Jy  sigma=1.325431
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056047Jy  sigma=1.325431
! Fit after  self-cal, rms=0.056029Jy  sigma=1.322926
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8822 mas, bmaj=2.093 mas, bpa=-5.491 degrees
! Estimated noise=0.239059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000677779 Jy
! Component: 100  -  total flux cleaned = 0.00119024 Jy
! Component: 150  -  total flux cleaned = 0.001541 Jy
! Component: 200  -  total flux cleaned = 0.00175544 Jy
! Total flux subtracted in 200 components = 0.00175544 Jy
! Clean residual min=-0.001528 max=0.001531 Jy/beam
! Clean residual mean=-0.000002 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.316381 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 72 components and 0.316381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056000Jy  sigma=1.322197
! Fit after  self-cal, rms=0.056001Jy  sigma=1.322132
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-49.2, 32.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000946484 Jy
! Component: 100  -  total flux cleaned = 0.00102357 Jy
! Component: 150  -  total flux cleaned = 0.00128566 Jy
! Component: 200  -  total flux cleaned = 0.00154079 Jy
! Total flux subtracted in 200 components = 0.00154079 Jy
! Clean residual min=-0.001434 max=0.001295 Jy/beam
! Clean residual mean=-0.000002 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.317922 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 88 components and 0.317922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055965Jy  sigma=1.321294
! Fit after  self-cal, rms=0.055962Jy  sigma=1.321234
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055962Jy  sigma=1.321234
! Fit after  self-cal, rms=0.056026Jy  sigma=1.321139
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8828 mas, bmaj=2.092 mas, bpa=-5.471 degrees
! Estimated noise=0.239284 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000392241 Jy
! Component: 100  -  total flux cleaned = 0.000699535 Jy
! Component: 150  -  total flux cleaned = 0.000911797 Jy
! Component: 200  -  total flux cleaned = 0.00108599 Jy
! Total flux subtracted in 200 components = 0.00108599 Jy
! Clean residual min=-0.001420 max=0.001233 Jy/beam
! Clean residual mean=-0.000002 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.319008 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 96 components and 0.319008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056011Jy  sigma=1.320801
! Fit after  self-cal, rms=0.056011Jy  sigma=1.320780
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197194 Jy
! Component: 100  -  total flux cleaned = 0.000376329 Jy
! Component: 150  -  total flux cleaned = 0.000467293 Jy
! Component: 200  -  total flux cleaned = 0.00055302 Jy
! Total flux subtracted in 200 components = 0.00055302 Jy
! Clean residual min=-0.001403 max=0.001231 Jy/beam
! Clean residual mean=-0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.319561 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 104 components and 0.319561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056003Jy  sigma=1.320591
! Fit after  self-cal, rms=0.056003Jy  sigma=1.320583
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056003Jy  sigma=1.320583
! Fit after  self-cal, rms=0.056061Jy  sigma=1.320559
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.021 mas, bmaj=3.248 mas, bpa=-4.961 degrees
! Estimated noise=0.306572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000671748 Jy
! Component: 100  -  total flux cleaned = 0.000934733 Jy
! Component: 150  -  total flux cleaned = 0.00100255 Jy
! Component: 200  -  total flux cleaned = 0.00101423 Jy
! Total flux subtracted in 200 components = 0.00101423 Jy
! Clean residual min=-0.001348 max=0.001416 Jy/beam
! Clean residual mean=-0.000003 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.320575 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 116 components and 0.320575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056061Jy  sigma=1.320533
! Fit after  self-cal, rms=0.056062Jy  sigma=1.320514
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200778 Jy
! Component: 100  -  total flux cleaned = 0.000200853 Jy
! Component: 150  -  total flux cleaned = 0.000162738 Jy
! Component: 200  -  total flux cleaned = 0.000145229 Jy
! Total flux subtracted in 200 components = 0.000145229 Jy
! Clean residual min=-0.001343 max=0.001433 Jy/beam
! Clean residual mean=-0.000003 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.320721 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 122 components and 0.320721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056063Jy  sigma=1.320523
! Fit after  self-cal, rms=0.056063Jy  sigma=1.320520
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8833 mas, bmaj=2.092 mas, bpa=-5.457 degrees
! Estimated noise=0.239489 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8833 x 2.092 at -5.457 degrees (North through East)
! Clean map  min=-0.0012887  max=0.16668 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7284 mas, bmaj=1.799 mas, bpa=-4.781 degrees
! Estimated noise=0.393706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.140462 Jy
! Component: 100  -  total flux cleaned = 0.208327 Jy
! Component: 150  -  total flux cleaned = 0.242898 Jy
! Component: 200  -  total flux cleaned = 0.263015 Jy
! Total flux subtracted in 200 components = 0.263015 Jy
! Clean residual min=-0.004660 max=0.010436 Jy/beam
! Clean residual mean=-0.000010 rms=0.001414 Jy/beam
! Combined flux in latest and established models = 0.263015 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.263015 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8833 mas, bmaj=2.092 mas, bpa=-5.457 degrees
! Estimated noise=0.239489 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163601 Jy
! Component: 100  -  total flux cleaned = 0.0253631 Jy
! Component: 150  -  total flux cleaned = 0.0312824 Jy
! Component: 200  -  total flux cleaned = 0.0355088 Jy
! Total flux subtracted in 200 components = 0.0355088 Jy
! Clean residual min=-0.002125 max=0.002898 Jy/beam
! Clean residual mean=-0.000010 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.298524 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 30 components and 0.298524 Jy
! Inverting map 
! Added new window around map position (2.8, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033606 Jy
! Component: 100  -  total flux cleaned = 0.00602602 Jy
! Component: 150  -  total flux cleaned = 0.00826757 Jy
! Component: 200  -  total flux cleaned = 0.0101734 Jy
! Total flux subtracted in 200 components = 0.0101734 Jy
! Clean residual min=-0.001780 max=0.001667 Jy/beam
! Clean residual mean=-0.000006 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.308697 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 70 components and 0.308697 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.021 mas, bmaj=3.248 mas, bpa=-4.961 degrees
! Estimated noise=0.306572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00279867 Jy
! Component: 100  -  total flux cleaned = 0.0046826 Jy
! Component: 150  -  total flux cleaned = 0.00615017 Jy
! Component: 200  -  total flux cleaned = 0.00733904 Jy
! Total flux subtracted in 200 components = 0.00733904 Jy
! Clean residual min=-0.001750 max=0.001362 Jy/beam
! Clean residual mean=-0.000006 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.316036 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000974695 Jy
! Component: 100  -  total flux cleaned = 0.00178049 Jy
! Component: 150  -  total flux cleaned = 0.00237628 Jy
! Component: 200  -  total flux cleaned = 0.00281416 Jy
! Total flux subtracted in 200 components = 0.00281416 Jy
! Clean residual min=-0.001498 max=0.001321 Jy/beam
! Clean residual mean=-0.000004 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.31885 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 141 components and 0.31885 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8833 mas, bmaj=2.092 mas, bpa=-5.457 degrees
! Estimated noise=0.239489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000286741 Jy
! Component: 100  -  total flux cleaned = 0.000501763 Jy
! Component: 150  -  total flux cleaned = 0.000624088 Jy
! Component: 200  -  total flux cleaned = 0.000830113 Jy
! Total flux subtracted in 200 components = 0.000830113 Jy
! Clean residual min=-0.001325 max=0.001336 Jy/beam
! Clean residual mean=-0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.319681 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 165 components and 0.319681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056067Jy  sigma=1.320382
! Fit after  self-cal, rms=0.056051Jy  sigma=1.320073
wmodel /scr/pima/bg219b_uvs/J0006+1235_X_map.mod
! Writing 165 model components to file: /scr/pima/bg219b_uvs/J0006+1235_X_map.mod
wobs /scr/pima/bg219b_uvs/J0006+1235_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J0006+1235_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J0006+1235_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bg219b_uvs/J0006+1235_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010725 Jy
! Component: 100  -  total flux cleaned = -0.000107411 Jy
! Component: 150  -  total flux cleaned = -0.000226342 Jy
! Component: 200  -  total flux cleaned = -0.000207573 Jy
! Component: 250  -  total flux cleaned = -0.000152958 Jy
! Component: 300  -  total flux cleaned = -0.000100904 Jy
! Component: 350  -  total flux cleaned = -3.38136e-05 Jy
! Component: 400  -  total flux cleaned = 4.8194e-05 Jy
! Component: 450  -  total flux cleaned = 0.00017575 Jy
! Component: 500  -  total flux cleaned = 0.000316179 Jy
! Component: 550  -  total flux cleaned = 0.000438512 Jy
! Component: 600  -  total flux cleaned = 0.000573592 Jy
! Component: 650  -  total flux cleaned = 0.000676981 Jy
! Component: 700  -  total flux cleaned = 0.000807349 Jy
! Component: 750  -  total flux cleaned = 0.000964084 Jy
! Component: 800  -  total flux cleaned = 0.00107581 Jy
! Component: 850  -  total flux cleaned = 0.00119979 Jy
! Component: 900  -  total flux cleaned = 0.00134918 Jy
! Component: 950  -  total flux cleaned = 0.00150954 Jy
! Component: 1000  -  total flux cleaned = 0.00162819 Jy
! Component: 1050  -  total flux cleaned = 0.00175785 Jy
! Component: 1100  -  total flux cleaned = 0.00187326 Jy
! Component: 1150  -  total flux cleaned = 0.0019998 Jy
! Component: 1200  -  total flux cleaned = 0.00209972 Jy
! Component: 1250  -  total flux cleaned = 0.00213684 Jy
! Component: 1300  -  total flux cleaned = 0.00219792 Jy
! Component: 1350  -  total flux cleaned = 0.00227036 Jy
! Component: 1400  -  total flux cleaned = 0.00235395 Jy
! Component: 1450  -  total flux cleaned = 0.0024013 Jy
! Component: 1500  -  total flux cleaned = 0.00249475 Jy
! Component: 1550  -  total flux cleaned = 0.00257568 Jy
! Component: 1600  -  total flux cleaned = 0.00260998 Jy
! Component: 1650  -  total flux cleaned = 0.00266664 Jy
! Component: 1700  -  total flux cleaned = 0.00275611 Jy
! Component: 1750  -  total flux cleaned = 0.00273372 Jy
! Component: 1800  -  total flux cleaned = 0.00284351 Jy
! Component: 1850  -  total flux cleaned = 0.00281064 Jy
! Component: 1900  -  total flux cleaned = 0.00287546 Jy
! Component: 1950  -  total flux cleaned = 0.00290757 Jy
! Component: 2000  -  total flux cleaned = 0.00297118 Jy
! Component: 2050  -  total flux cleaned = 0.00301312 Jy
! Component: 2100  -  total flux cleaned = 0.00305474 Jy
! Component: 2150  -  total flux cleaned = 0.00312669 Jy
! Component: 2200  -  total flux cleaned = 0.00311647 Jy
! Component: 2250  -  total flux cleaned = 0.00316695 Jy
! Component: 2300  -  total flux cleaned = 0.00321689 Jy
! Component: 2350  -  total flux cleaned = 0.0032467 Jy
! Component: 2400  -  total flux cleaned = 0.00330577 Jy
! Component: 2450  -  total flux cleaned = 0.00334472 Jy
! Component: 2500  -  total flux cleaned = 0.00336419 Jy
! Component: 2550  -  total flux cleaned = 0.00342181 Jy
! Component: 2600  -  total flux cleaned = 0.00343137 Jy
! Component: 2650  -  total flux cleaned = 0.00347854 Jy
! Component: 2700  -  total flux cleaned = 0.00349735 Jy
! Component: 2750  -  total flux cleaned = 0.00353456 Jy
! Component: 2800  -  total flux cleaned = 0.00358988 Jy
! Component: 2850  -  total flux cleaned = 0.00363555 Jy
! Component: 2900  -  total flux cleaned = 0.00370811 Jy
! Component: 2950  -  total flux cleaned = 0.00371697 Jy
! Component: 3000  -  total flux cleaned = 0.00373473 Jy
! Component: 3050  -  total flux cleaned = 0.00373465 Jy
! Component: 3100  -  total flux cleaned = 0.00377868 Jy
! Component: 3150  -  total flux cleaned = 0.00379621 Jy
! Component: 3200  -  total flux cleaned = 0.00383099 Jy
! Component: 3250  -  total flux cleaned = 0.00385685 Jy
! Component: 3300  -  total flux cleaned = 0.0038482 Jy
! Component: 3350  -  total flux cleaned = 0.00386509 Jy
! Component: 3400  -  total flux cleaned = 0.0038735 Jy
! Component: 3450  -  total flux cleaned = 0.00387349 Jy
! Component: 3500  -  total flux cleaned = 0.00389018 Jy
! Component: 3550  -  total flux cleaned = 0.00391504 Jy
! Component: 3600  -  total flux cleaned = 0.0039151 Jy
! Component: 3650  -  total flux cleaned = 0.00392335 Jy
! Component: 3700  -  total flux cleaned = 0.00396398 Jy
! Component: 3750  -  total flux cleaned = 0.00399615 Jy
! Component: 3800  -  total flux cleaned = 0.00398807 Jy
! Component: 3850  -  total flux cleaned = 0.00398808 Jy
! Component: 3900  -  total flux cleaned = 0.00398815 Jy
! Component: 3950  -  total flux cleaned = 0.00404337 Jy
! Component: 4000  -  total flux cleaned = 0.00403558 Jy
! Component: 4050  -  total flux cleaned = 0.00402781 Jy
! Total flux subtracted in 4096 components = 0.00403559 Jy
! Clean residual min=-0.000538 max=0.000503 Jy/beam
! Clean residual mean=-0.000001 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.323716 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 453 components and 0.323716 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J0006+1235_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8833 x 2.092 at -5.457 degrees (North through East)
! Clean map  min=-0.00079592  max=0.16669 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0006+1235_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.166689 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000130208 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.234344 0.234344 0.468687 0.937374 1.87475 3.7495 7.49899 14.998 29.996 59.9919
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.166 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1280.17 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0006+1235_X_uvs.log closed on Thu Apr  7 01:37:15 2016