! Started logfile: /scr/pima/bg219b_uvs/J0006+1235_X_dfm.log on Thu May 19 19:52:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0006+1235_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0006+1235_X_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.836905 visibilities/baseline/integration-bin.
! Found source: J0006+1235
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25308 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0006+1235_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025268Jy  sigma=24.327820
! Fit after  self-cal, rms=0.822987Jy  sigma=19.479401
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7005 mas, bmaj=1.738 mas, bpa=-5.338 degrees
! Estimated noise=0.343774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129231 Jy
! Component: 100  -  total flux cleaned = 0.192661 Jy
! Total flux subtracted in 100 components = 0.192661 Jy
! Clean residual min=-0.016456 max=0.036557 Jy/beam
! Clean residual mean=-0.000012 rms=0.004200 Jy/beam
! Combined flux in latest and established models = 0.192661 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.192661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106540Jy  sigma=2.471149
! Fit after  self-cal, rms=0.102656Jy  sigma=2.390077
! Inverting map 
! Added new window around map position (-0.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0494241 Jy
! Component: 100  -  total flux cleaned = 0.0756643 Jy
! Total flux subtracted in 100 components = 0.0756643 Jy
! Clean residual min=-0.009199 max=0.012783 Jy/beam
! Clean residual mean=-0.000005 rms=0.001855 Jy/beam
! Combined flux in latest and established models = 0.268326 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 0.268326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071006Jy  sigma=1.599595
! Fit after  self-cal, rms=0.069258Jy  sigma=1.561513
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183839 Jy
! Component: 100  -  total flux cleaned = 0.0277025 Jy
! Total flux subtracted in 100 components = 0.0277025 Jy
! Clean residual min=-0.004180 max=0.004544 Jy/beam
! Clean residual mean=-0.000002 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.296028 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 13 components and 0.296028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063763Jy  sigma=1.425442
! Fit after  self-cal, rms=0.063515Jy  sigma=1.419895
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00625197 Jy
! Component: 100  -  total flux cleaned = 0.00941619 Jy
! Total flux subtracted in 100 components = 0.00941619 Jy
! Clean residual min=-0.002908 max=0.004434 Jy/beam
! Clean residual mean=-0.000001 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.305444 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.305444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062858Jy  sigma=1.405235
! Fit after  self-cal, rms=0.062830Jy  sigma=1.404559
! Inverting map 
! Added new window around map position (6.4, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00413865 Jy
! Component: 100  -  total flux cleaned = 0.00658561 Jy
! Total flux subtracted in 100 components = 0.00658561 Jy
! Clean residual min=-0.002758 max=0.002777 Jy/beam
! Clean residual mean=-0.000001 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.31203 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.31203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062490Jy  sigma=1.395982
! Fit after  self-cal, rms=0.062464Jy  sigma=1.395490
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8744 mas, bmaj=2.071 mas, bpa=-5.392 degrees
! Estimated noise=0.190565 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00288435 Jy
! Component: 100  -  total flux cleaned = 0.00480883 Jy
! Component: 150  -  total flux cleaned = 0.00622657 Jy
! Component: 200  -  total flux cleaned = 0.00731758 Jy
! Total flux subtracted in 200 components = 0.00731758 Jy
! Clean residual min=-0.002382 max=0.003199 Jy/beam
! Clean residual mean=-0.000007 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.319348 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 44 components and 0.319348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062287Jy  sigma=1.391745
! Fit after  self-cal, rms=0.062271Jy  sigma=1.391346
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8744 x 2.071 at -5.392 degrees (North through East)
! Clean map  min=-0.0022943  max=0.16995 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.97     
!   LA        1.00     MK        0.96     NL        1.03     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        1.01     KP        1.01     
!   LA        1.02     MK        0.99     NL        1.05     OV        1.04     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.04     KP        1.03     
!   LA        1.03     MK        1.03     NL        1.07     OV        1.04     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.01     KP        1.00     
!   LA        1.00     MK        0.98     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.99     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.03     OV        1.01     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.98     KP        1.00     
!   LA        1.01     MK        1.04     NL        1.06     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.01     KP        1.04     
!   LA        1.03     MK        1.01     NL        1.05     OV        1.03     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.00     
!   LA        0.97     MK        1.04     NL        1.03     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.03     OV        1.01     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.98     KP        0.97     
!   LA        0.97     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.00     KP        0.96     
!   LA        0.96     MK        0.99     NL        1.02     OV        0.98     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        0.93     KP        0.94     
!   LA        0.98     MK        0.90     NL        0.98     OV        0.95     
!   PT        0.92     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.062271Jy  sigma=1.391346
! Fit after  self-cal, rms=0.060667Jy  sigma=1.364986
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8752 mas, bmaj=2.077 mas, bpa=-5.481 degrees
! Estimated noise=0.190821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.6, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293366 Jy
! Component: 100  -  total flux cleaned = 0.00459488 Jy
! Component: 150  -  total flux cleaned = 0.0053234 Jy
! Component: 200  -  total flux cleaned = 0.00579682 Jy
! Total flux subtracted in 200 components = 0.00579682 Jy
! Clean residual min=-0.001676 max=0.001584 Jy/beam
! Clean residual mean=-0.000002 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.325144 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 69 components and 0.325144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060510Jy  sigma=1.361208
! Fit after  self-cal, rms=0.060499Jy  sigma=1.360942
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060499Jy  sigma=1.360942
! Fit after  self-cal, rms=0.060550Jy  sigma=1.358549
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8757 mas, bmaj=2.075 mas, bpa=-5.462 degrees
! Estimated noise=0.191033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000893971 Jy
! Component: 100  -  total flux cleaned = 0.00123333 Jy
! Component: 150  -  total flux cleaned = 0.0014797 Jy
! Component: 200  -  total flux cleaned = 0.00157417 Jy
! Total flux subtracted in 200 components = 0.00157417 Jy
! Clean residual min=-0.001462 max=0.001397 Jy/beam
! Clean residual mean=-0.000002 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.326719 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 79 components and 0.326719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060518Jy  sigma=1.357810
! Fit after  self-cal, rms=0.060519Jy  sigma=1.357740
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000153557 Jy
! Component: 100  -  total flux cleaned = 0.000220354 Jy
! Component: 150  -  total flux cleaned = 0.00024032 Jy
! Component: 200  -  total flux cleaned = 0.000240971 Jy
! Total flux subtracted in 200 components = 0.000240971 Jy
! Clean residual min=-0.001457 max=0.001415 Jy/beam
! Clean residual mean=-0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.32696 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 86 components and 0.32696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060505Jy  sigma=1.357438
! Fit after  self-cal, rms=0.060504Jy  sigma=1.357414
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060504Jy  sigma=1.357414
! Fit after  self-cal, rms=0.060594Jy  sigma=1.357359
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8759 mas, bmaj=2.074 mas, bpa=-5.46 degrees
! Estimated noise=0.191198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.54908e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104652 Jy
! Component: 150  -  total flux cleaned = 8.56156e-05 Jy
! Component: 200  -  total flux cleaned = 6.92238e-05 Jy
! Total flux subtracted in 200 components = 6.92238e-05 Jy
! Clean residual min=-0.001393 max=0.001384 Jy/beam
! Clean residual mean=-0.000002 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.327029 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.327029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060582Jy  sigma=1.357101
! Fit after  self-cal, rms=0.060582Jy  sigma=1.357084
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.17971e-05 Jy
! Component: 100  -  total flux cleaned = 4.79795e-05 Jy
! Component: 150  -  total flux cleaned = 4.80993e-05 Jy
! Component: 200  -  total flux cleaned = 4.83642e-05 Jy
! Total flux subtracted in 200 components = 4.83642e-05 Jy
! Clean residual min=-0.001347 max=0.001383 Jy/beam
! Clean residual mean=-0.000002 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.327077 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 98 components and 0.327077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060573Jy  sigma=1.356921
! Fit after  self-cal, rms=0.060573Jy  sigma=1.356906
! Inverting map 
! Added new window around map position (-16.6, 22.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000417047 Jy
! Component: 100  -  total flux cleaned = 0.000325074 Jy
! Component: 150  -  total flux cleaned = 0.000371193 Jy
! Component: 200  -  total flux cleaned = 0.000476234 Jy
! Total flux subtracted in 200 components = 0.000476234 Jy
! Clean residual min=-0.001275 max=0.001110 Jy/beam
! Clean residual mean=-0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.327554 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 114 components and 0.327553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060541Jy  sigma=1.356154
! Fit after  self-cal, rms=0.060540Jy  sigma=1.356118
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060540Jy  sigma=1.356118
! Fit after  self-cal, rms=0.060592Jy  sigma=1.356077
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.025 mas, bmaj=3.244 mas, bpa=-5.185 degrees
! Estimated noise=0.244586 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000534813 Jy
! Component: 100  -  total flux cleaned = 0.00057342 Jy
! Component: 150  -  total flux cleaned = 0.000588166 Jy
! Component: 200  -  total flux cleaned = 0.000631388 Jy
! Total flux subtracted in 200 components = 0.000631388 Jy
! Clean residual min=-0.001152 max=0.001332 Jy/beam
! Clean residual mean=-0.000003 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.328185 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 122 components and 0.328185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060586Jy  sigma=1.355984
! Fit after  self-cal, rms=0.060587Jy  sigma=1.355970
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.24051e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107167 Jy
! Component: 150  -  total flux cleaned = 0.000118218 Jy
! Component: 200  -  total flux cleaned = 0.000139387 Jy
! Total flux subtracted in 200 components = 0.000139387 Jy
! Clean residual min=-0.001134 max=0.001338 Jy/beam
! Clean residual mean=-0.000003 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.328324 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 130 components and 0.328324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060586Jy  sigma=1.355947
! Fit after  self-cal, rms=0.060586Jy  sigma=1.355944
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8763 mas, bmaj=2.073 mas, bpa=-5.447 degrees
! Estimated noise=0.191268 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8763 x 2.073 at -5.447 degrees (North through East)
! Clean map  min=-0.0010578  max=0.17072 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7009 mas, bmaj=1.738 mas, bpa=-5.477 degrees
! Estimated noise=0.343845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137706 Jy
! Component: 100  -  total flux cleaned = 0.207038 Jy
! Component: 150  -  total flux cleaned = 0.24413 Jy
! Component: 200  -  total flux cleaned = 0.266091 Jy
! Total flux subtracted in 200 components = 0.266091 Jy
! Clean residual min=-0.004902 max=0.011653 Jy/beam
! Clean residual mean=-0.000006 rms=0.001385 Jy/beam
! Combined flux in latest and established models = 0.266091 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.266091 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8763 mas, bmaj=2.073 mas, bpa=-5.447 degrees
! Estimated noise=0.191268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195702 Jy
! Component: 100  -  total flux cleaned = 0.029942 Jy
! Component: 150  -  total flux cleaned = 0.0364814 Jy
! Component: 200  -  total flux cleaned = 0.0412363 Jy
! Total flux subtracted in 200 components = 0.0412363 Jy
! Clean residual min=-0.002100 max=0.003188 Jy/beam
! Clean residual mean=-0.000009 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.307328 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 32 components and 0.307328 Jy
! Inverting map 
! Added new window around map position (-10.2, -38.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00376644 Jy
! Component: 100  -  total flux cleaned = 0.00673124 Jy
! Component: 150  -  total flux cleaned = 0.00914367 Jy
! Component: 200  -  total flux cleaned = 0.0111348 Jy
! Total flux subtracted in 200 components = 0.0111348 Jy
! Clean residual min=-0.001537 max=0.001877 Jy/beam
! Clean residual mean=-0.000005 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.318462 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 61 components and 0.318462 Jy
! Inverting map 
! Added new window around map position (2.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020059 Jy
! Component: 100  -  total flux cleaned = 0.00349594 Jy
! Component: 150  -  total flux cleaned = 0.00446335 Jy
! Component: 200  -  total flux cleaned = 0.00513559 Jy
! Total flux subtracted in 200 components = 0.00513559 Jy
! Clean residual min=-0.001296 max=0.001300 Jy/beam
! Clean residual mean=-0.000003 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.323598 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 82 components and 0.323598 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.025 mas, bmaj=3.244 mas, bpa=-5.185 degrees
! Estimated noise=0.244586 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152322 Jy
! Component: 100  -  total flux cleaned = 0.00253696 Jy
! Component: 150  -  total flux cleaned = 0.00302978 Jy
! Component: 200  -  total flux cleaned = 0.00346469 Jy
! Total flux subtracted in 200 components = 0.00346469 Jy
! Clean residual min=-0.001239 max=0.001437 Jy/beam
! Clean residual mean=-0.000004 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.327063 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000353718 Jy
! Component: 100  -  total flux cleaned = 0.000530171 Jy
! Component: 150  -  total flux cleaned = 0.00062045 Jy
! Component: 200  -  total flux cleaned = 0.000654106 Jy
! Total flux subtracted in 200 components = 0.000654106 Jy
! Clean residual min=-0.001163 max=0.001450 Jy/beam
! Clean residual mean=-0.000003 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.327717 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 125 components and 0.327717 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8763 mas, bmaj=2.073 mas, bpa=-5.447 degrees
! Estimated noise=0.191268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259906 Jy
! Component: 100  -  total flux cleaned = -0.000287809 Jy
! Component: 150  -  total flux cleaned = -0.000263152 Jy
! Component: 200  -  total flux cleaned = -0.000264856 Jy
! Total flux subtracted in 200 components = -0.000264856 Jy
! Clean residual min=-0.001110 max=0.001161 Jy/beam
! Clean residual mean=-0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.327452 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 144 components and 0.327452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060565Jy  sigma=1.355358
! Fit after  self-cal, rms=0.060542Jy  sigma=1.354900
wmodel /J0006+1235_X_map.mod
! wmodel: Unable to open new model file: /J0006+1235_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0006+1235_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8763 x 2.073 at -5.447 degrees (North through East)
! Clean map  min=-0.0010284  max=0.17049 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0006+1235_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.170488 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000265419 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.467047 0.467047 0.934094 1.86819 3.73638 7.47275 14.9455 29.891 59.782
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.17 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  642.333 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0006+1235_X_dfm.log closed on Thu May 19 19:52:55 2016