! Started logfile: difmap.log_65 on Thu Apr 7 21:55:12 2016 ![@/tmp/difmap__4071.1] ! Obeying initialization file: /tmp/difmap__4071.1 ![@/home/lpetrov/config/difmap.cnf] device /XW ! Attempting to open device: '/XW' vflags="fb3" integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float taper_size taper_size = 70. integer field_size field_size = 1024 float field_cell field_cell = 0.1 float old_peak float new_peak float flux_cutoff ![Exited script file: /home/lpetrov/config/difmap.cnf] ![@/tmp/difmap__4071.2] ![Exited script file: /tmp/difmap__4071.2] obs J0211+1051_S_uva.fits ! Reading UV FITS file: J0211+1051_S_uva.fits ! AN table 1: 28 integrations on 15 of 15 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0211+1051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 1680 visibilities. ![Exited script file: /tmp/difmap__4071.1] sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 field_size=1024 field_cell=0.4 taper_size = 20. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.519614Jy sigma=25.940473 ! Fit after self-cal, rms=0.157181Jy sigma=2.630425 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help vplot 1,1:ov ! Overriding default options with user defined vflags="fb3" ! For help move the cursor into the plot window and press 'H'. ! Applying 2 buffered edits. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=6.484 mas, bpa=-5.02 degrees ! Estimated noise=1.54942 mJy/beam. ! clean: niter=200 gain=0.02 cutoff=0 ! Component: 050 - total flux cleaned = 0.687575 Jy ! Component: 100 - total flux cleaned = 0.937969 Jy ! Component: 150 - total flux cleaned = 1.03518 Jy ! Component: 200 - total flux cleaned = 1.09016 Jy ! Total flux subtracted in 200 components = 1.09016 Jy ! Clean residual min=-0.025312 max=0.042619 Jy/beam ! Clean residual mean=-0.000085 rms=0.007951 Jy/beam ! Combined flux in latest and established models = 1.09016 Jy mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.113333Jy sigma=18.735587 ! Fit after self-cal, rms=1.113333Jy sigma=18.735587 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=6.484 mas, bpa=-5.02 degrees ! Estimated noise=1.54942 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.427139 Jy ! Component: 100 - total flux cleaned = 0.68556 Jy ! Component: 150 - total flux cleaned = 0.841907 Jy ! Component: 200 - total flux cleaned = 0.936498 Jy ! Component: 250 - total flux cleaned = 0.993953 Jy ! Component: 300 - total flux cleaned = 1.03411 Jy ! Component: 350 - total flux cleaned = 1.06513 Jy ! Component: 400 - total flux cleaned = 1.08928 Jy ! Component: 450 - total flux cleaned = 1.10829 Jy ! Component: 500 - total flux cleaned = 1.12349 Jy ! Component: 550 - total flux cleaned = 1.13576 Jy ! Component: 600 - total flux cleaned = 1.1458 Jy ! Component: 650 - total flux cleaned = 1.15407 Jy ! Component: 700 - total flux cleaned = 1.16087 Jy ! Component: 750 - total flux cleaned = 1.16647 Jy ! Component: 800 - total flux cleaned = 1.17109 Jy ! Total flux subtracted in 800 components = 1.17109 Jy ! Clean residual min=-0.019583 max=0.026127 Jy/beam ! Clean residual mean=-0.000026 rms=0.004489 Jy/beam ! Combined flux in latest and established models = 1.17109 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.17109 Jy ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=7.076 mas, bpa=-8.403 degrees ! Estimated noise=1.12376 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00693935 Jy ! Component: 100 - total flux cleaned = 0.012132 Jy ! Component: 150 - total flux cleaned = 0.0162225 Jy ! Component: 200 - total flux cleaned = 0.0194477 Jy ! Component: 250 - total flux cleaned = 0.0219906 Jy ! Component: 300 - total flux cleaned = 0.0239956 Jy ! Component: 350 - total flux cleaned = 0.0255764 Jy ! Component: 400 - total flux cleaned = 0.0264554 Jy ! Component: 450 - total flux cleaned = 0.026687 Jy ! Component: 500 - total flux cleaned = 0.0269495 Jy ! Component: 550 - total flux cleaned = 0.0271566 Jy ! Component: 600 - total flux cleaned = 0.0273919 Jy ! Component: 650 - total flux cleaned = 0.0275777 Jy ! Component: 700 - total flux cleaned = 0.0277889 Jy ! Component: 750 - total flux cleaned = 0.0279554 Jy ! Component: 800 - total flux cleaned = 0.0281142 Jy ! Component: 850 - total flux cleaned = 0.0282652 Jy ! Component: 900 - total flux cleaned = 0.0284375 Jy ! Component: 950 - total flux cleaned = 0.0285736 Jy ! Component: 1000 - total flux cleaned = 0.0287036 Jy ! Component: 1050 - total flux cleaned = 0.0288275 Jy ! Component: 1100 - total flux cleaned = 0.0289227 Jy ! Component: 1150 - total flux cleaned = 0.0289913 Jy ! Component: 1200 - total flux cleaned = 0.0290357 Jy ! Total flux subtracted in 1200 components = 0.0290357 Jy ! Clean residual min=-0.016153 max=0.019544 Jy/beam ! Clean residual mean=-0.000046 rms=0.003613 Jy/beam ! Combined flux in latest and established models = 1.20012 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 1.20012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070996Jy sigma=1.088825 ! Fit after self-cal, rms=0.070002Jy sigma=1.069850 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070002Jy sigma=1.069850 ! Fit after self-cal, rms=0.067770Jy sigma=1.024031 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.114724Jy sigma=18.735587 ! Fit after self-cal, rms=1.114724Jy sigma=18.735587 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=6.493 mas, bpa=-5.124 degrees ! Estimated noise=1.55429 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.428458 Jy ! Component: 100 - total flux cleaned = 0.687678 Jy ! Component: 150 - total flux cleaned = 0.844507 Jy ! Component: 200 - total flux cleaned = 0.93939 Jy ! Component: 250 - total flux cleaned = 0.99704 Jy ! Component: 300 - total flux cleaned = 1.03717 Jy ! Component: 350 - total flux cleaned = 1.06809 Jy ! Component: 400 - total flux cleaned = 1.09201 Jy ! Component: 450 - total flux cleaned = 1.11067 Jy ! Component: 500 - total flux cleaned = 1.12529 Jy ! Component: 550 - total flux cleaned = 1.13688 Jy ! Component: 600 - total flux cleaned = 1.14625 Jy ! Component: 650 - total flux cleaned = 1.15393 Jy ! Component: 700 - total flux cleaned = 1.16025 Jy ! Component: 750 - total flux cleaned = 1.16544 Jy ! Component: 800 - total flux cleaned = 1.16972 Jy ! Total flux subtracted in 800 components = 1.16972 Jy ! Clean residual min=-0.014798 max=0.022847 Jy/beam ! Clean residual mean=-0.000004 rms=0.003836 Jy/beam ! Combined flux in latest and established models = 1.16972 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.16972 Jy ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=7.123 mas, bpa=-8.634 degrees ! Estimated noise=1.12374 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596173 Jy ! Component: 100 - total flux cleaned = 0.0102702 Jy ! Component: 150 - total flux cleaned = 0.0136076 Jy ! Component: 200 - total flux cleaned = 0.0162273 Jy ! Component: 250 - total flux cleaned = 0.0182877 Jy ! Component: 300 - total flux cleaned = 0.0199081 Jy ! Component: 350 - total flux cleaned = 0.0204547 Jy ! Component: 400 - total flux cleaned = 0.0207561 Jy ! Component: 450 - total flux cleaned = 0.0209936 Jy ! Component: 500 - total flux cleaned = 0.0212637 Jy ! Component: 550 - total flux cleaned = 0.0214767 Jy ! Component: 600 - total flux cleaned = 0.0216796 Jy ! Component: 650 - total flux cleaned = 0.0218725 Jy ! Component: 700 - total flux cleaned = 0.0220555 Jy ! Component: 750 - total flux cleaned = 0.0222295 Jy ! Component: 800 - total flux cleaned = 0.0223624 Jy ! Component: 850 - total flux cleaned = 0.0225213 Jy ! Component: 900 - total flux cleaned = 0.0226433 Jy ! Component: 950 - total flux cleaned = 0.0227892 Jy ! Component: 1000 - total flux cleaned = 0.022901 Jy ! Component: 1050 - total flux cleaned = 0.0230348 Jy ! Component: 1100 - total flux cleaned = 0.0231374 Jy ! Component: 1150 - total flux cleaned = 0.0232359 Jy ! Component: 1200 - total flux cleaned = 0.0232361 Jy ! Total flux subtracted in 1200 components = 0.0232361 Jy ! Clean residual min=-0.012961 max=0.016354 Jy/beam ! Clean residual mean=-0.000027 rms=0.002966 Jy/beam ! Combined flux in latest and established models = 1.19295 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.114724Jy sigma=18.735587 ! Fit after self-cal, rms=1.114724Jy sigma=18.735587 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=6.493 mas, bpa=-5.124 degrees ! Estimated noise=1.55429 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.428458 Jy ! Component: 100 - total flux cleaned = 0.687678 Jy ! Component: 150 - total flux cleaned = 0.844507 Jy ! Component: 200 - total flux cleaned = 0.93939 Jy ! Component: 250 - total flux cleaned = 0.99704 Jy ! Component: 300 - total flux cleaned = 1.03717 Jy ! Component: 350 - total flux cleaned = 1.06809 Jy ! Component: 400 - total flux cleaned = 1.09201 Jy ! Component: 450 - total flux cleaned = 1.11071 Jy ! Component: 500 - total flux cleaned = 1.12584 Jy ! Component: 550 - total flux cleaned = 1.13846 Jy ! Component: 600 - total flux cleaned = 1.14909 Jy ! Component: 650 - total flux cleaned = 1.15807 Jy ! Component: 700 - total flux cleaned = 1.16566 Jy ! Component: 750 - total flux cleaned = 1.17211 Jy ! Component: 800 - total flux cleaned = 1.17762 Jy ! Total flux subtracted in 800 components = 1.17762 Jy ! Clean residual min=-0.012070 max=0.015320 Jy/beam ! Clean residual mean=0.000009 rms=0.003194 Jy/beam ! Combined flux in latest and established models = 1.17762 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.17762 Jy ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=7.123 mas, bpa=-8.634 degrees ! Estimated noise=1.12374 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649104 Jy ! Component: 100 - total flux cleaned = 0.0116146 Jy ! Component: 150 - total flux cleaned = 0.0158117 Jy ! Component: 200 - total flux cleaned = 0.019454 Jy ! Component: 250 - total flux cleaned = 0.0226713 Jy ! Component: 300 - total flux cleaned = 0.0255225 Jy ! Component: 350 - total flux cleaned = 0.0273702 Jy ! Component: 400 - total flux cleaned = 0.0286758 Jy ! Component: 450 - total flux cleaned = 0.0298757 Jy ! Component: 500 - total flux cleaned = 0.0309805 Jy ! Component: 550 - total flux cleaned = 0.0319298 Jy ! Component: 600 - total flux cleaned = 0.0324086 Jy ! Component: 650 - total flux cleaned = 0.0328631 Jy ! Component: 700 - total flux cleaned = 0.0333547 Jy ! Component: 750 - total flux cleaned = 0.0337045 Jy ! Component: 800 - total flux cleaned = 0.0340932 Jy ! Component: 850 - total flux cleaned = 0.0344089 Jy ! Component: 900 - total flux cleaned = 0.0347098 Jy ! Component: 950 - total flux cleaned = 0.0349488 Jy ! Component: 1000 - total flux cleaned = 0.0351777 Jy ! Component: 1050 - total flux cleaned = 0.0353103 Jy ! Component: 1100 - total flux cleaned = 0.0354381 Jy ! Component: 1150 - total flux cleaned = 0.0355604 Jy ! Component: 1200 - total flux cleaned = 0.0356777 Jy ! Total flux subtracted in 1200 components = 0.0356777 Jy ! Clean residual min=-0.008561 max=0.007841 Jy/beam ! Clean residual mean=0.000068 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 1.21329 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.114724Jy sigma=18.735587 ! Fit after self-cal, rms=1.114724Jy sigma=18.735587 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=6.493 mas, bpa=-5.124 degrees ! Estimated noise=1.55429 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.428458 Jy ! Component: 100 - total flux cleaned = 0.687678 Jy ! Component: 150 - total flux cleaned = 0.844507 Jy ! Component: 200 - total flux cleaned = 0.93939 Jy ! Component: 250 - total flux cleaned = 0.99704 Jy ! Component: 300 - total flux cleaned = 1.03717 Jy ! Component: 350 - total flux cleaned = 1.06809 Jy ! Component: 400 - total flux cleaned = 1.09201 Jy ! Component: 450 - total flux cleaned = 1.11067 Jy ! Component: 500 - total flux cleaned = 1.12529 Jy ! Component: 550 - total flux cleaned = 1.13688 Jy ! Component: 600 - total flux cleaned = 1.14625 Jy ! Component: 650 - total flux cleaned = 1.154 Jy ! Component: 700 - total flux cleaned = 1.16069 Jy ! Component: 750 - total flux cleaned = 1.16652 Jy ! Component: 800 - total flux cleaned = 1.17163 Jy ! Total flux subtracted in 800 components = 1.17163 Jy ! Clean residual min=-0.014459 max=0.021619 Jy/beam ! Clean residual mean=0.000002 rms=0.003729 Jy/beam ! Combined flux in latest and established models = 1.17163 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.17163 Jy ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=7.123 mas, bpa=-8.634 degrees ! Estimated noise=1.12374 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678132 Jy ! Component: 100 - total flux cleaned = 0.0119685 Jy ! Component: 150 - total flux cleaned = 0.0161597 Jy ! Component: 200 - total flux cleaned = 0.0195689 Jy ! Component: 250 - total flux cleaned = 0.0224579 Jy ! Component: 300 - total flux cleaned = 0.0249746 Jy ! Component: 350 - total flux cleaned = 0.0271972 Jy ! Component: 400 - total flux cleaned = 0.0291679 Jy ! Component: 450 - total flux cleaned = 0.0309159 Jy ! Component: 500 - total flux cleaned = 0.0324669 Jy ! Component: 550 - total flux cleaned = 0.033843 Jy ! Component: 600 - total flux cleaned = 0.0350639 Jy ! Component: 650 - total flux cleaned = 0.0361064 Jy ! Component: 700 - total flux cleaned = 0.0362286 Jy ! Component: 750 - total flux cleaned = 0.0363872 Jy ! Component: 800 - total flux cleaned = 0.0365044 Jy ! Component: 850 - total flux cleaned = 0.0366191 Jy ! Component: 900 - total flux cleaned = 0.0366565 Jy ! Component: 950 - total flux cleaned = 0.0366566 Jy ! Component: 1000 - total flux cleaned = 0.0366934 Jy ! Component: 1050 - total flux cleaned = 0.0366934 Jy ! Component: 1100 - total flux cleaned = 0.0366931 Jy ! Component: 1150 - total flux cleaned = 0.0366933 Jy ! Component: 1200 - total flux cleaned = 0.0367287 Jy ! Total flux subtracted in 1200 components = 0.0367287 Jy ! Clean residual min=-0.011800 max=0.014211 Jy/beam ! Clean residual mean=0.000045 rms=0.002625 Jy/beam ! Combined flux in latest and established models = 1.20836 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.114724Jy sigma=18.735587 ! Fit after self-cal, rms=1.114724Jy sigma=18.735587 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=6.493 mas, bpa=-5.124 degrees ! Estimated noise=1.55429 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.428458 Jy ! Component: 100 - total flux cleaned = 0.687678 Jy ! Component: 150 - total flux cleaned = 0.844507 Jy ! Component: 200 - total flux cleaned = 0.93939 Jy ! Component: 250 - total flux cleaned = 0.99704 Jy ! Component: 300 - total flux cleaned = 1.03717 Jy ! Component: 350 - total flux cleaned = 1.06809 Jy ! Component: 400 - total flux cleaned = 1.09201 Jy ! Component: 450 - total flux cleaned = 1.11067 Jy ! Component: 500 - total flux cleaned = 1.12529 Jy ! Component: 550 - total flux cleaned = 1.13688 Jy ! Component: 600 - total flux cleaned = 1.14625 Jy ! Component: 650 - total flux cleaned = 1.15402 Jy ! Component: 700 - total flux cleaned = 1.16086 Jy ! Component: 750 - total flux cleaned = 1.16696 Jy ! Component: 800 - total flux cleaned = 1.17241 Jy ! Total flux subtracted in 800 components = 1.17241 Jy ! Clean residual min=-0.014265 max=0.021590 Jy/beam ! Clean residual mean=0.000005 rms=0.003679 Jy/beam ! Combined flux in latest and established models = 1.1724 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.1724 Jy ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=7.123 mas, bpa=-8.634 degrees ! Estimated noise=1.12374 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00700437 Jy ! Component: 100 - total flux cleaned = 0.0122786 Jy ! Component: 150 - total flux cleaned = 0.016522 Jy ! Component: 200 - total flux cleaned = 0.0200406 Jy ! Component: 250 - total flux cleaned = 0.0230281 Jy ! Component: 300 - total flux cleaned = 0.0256605 Jy ! Component: 350 - total flux cleaned = 0.0279843 Jy ! Component: 400 - total flux cleaned = 0.0300356 Jy ! Component: 450 - total flux cleaned = 0.0318471 Jy ! Component: 500 - total flux cleaned = 0.0334493 Jy ! Component: 550 - total flux cleaned = 0.0348676 Jy ! Component: 600 - total flux cleaned = 0.0361256 Jy ! Component: 650 - total flux cleaned = 0.0372461 Jy ! Component: 700 - total flux cleaned = 0.0378592 Jy ! Component: 750 - total flux cleaned = 0.0381689 Jy ! Component: 800 - total flux cleaned = 0.0385038 Jy ! Component: 850 - total flux cleaned = 0.038825 Jy ! Component: 900 - total flux cleaned = 0.0390658 Jy ! Component: 950 - total flux cleaned = 0.0391666 Jy ! Component: 1000 - total flux cleaned = 0.0391993 Jy ! Component: 1050 - total flux cleaned = 0.0392322 Jy ! Component: 1100 - total flux cleaned = 0.039265 Jy ! Component: 1150 - total flux cleaned = 0.039297 Jy ! Component: 1200 - total flux cleaned = 0.039329 Jy ! Total flux subtracted in 1200 components = 0.039329 Jy ! Clean residual min=-0.012448 max=0.013479 Jy/beam ! Clean residual mean=0.000065 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 1.21173 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 45 components and 1.21173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064262Jy sigma=0.978933 ! Fit after self-cal, rms=0.064092Jy sigma=0.975825 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064092Jy sigma=0.975825 ! Fit after self-cal, rms=0.063545Jy sigma=0.967787 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.112961Jy sigma=18.735587 ! Fit after self-cal, rms=1.112961Jy sigma=18.735587 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=6.492 mas, bpa=-5.093 degrees ! Estimated noise=1.5541 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.428388 Jy ! Component: 100 - total flux cleaned = 0.687566 Jy ! Component: 150 - total flux cleaned = 0.84437 Jy ! Component: 200 - total flux cleaned = 0.939237 Jy ! Component: 250 - total flux cleaned = 0.996793 Jy ! Component: 300 - total flux cleaned = 1.03653 Jy ! Component: 350 - total flux cleaned = 1.06707 Jy ! Component: 400 - total flux cleaned = 1.09065 Jy ! Component: 450 - total flux cleaned = 1.109 Jy ! Component: 500 - total flux cleaned = 1.12336 Jy ! Component: 550 - total flux cleaned = 1.13473 Jy ! Component: 600 - total flux cleaned = 1.14393 Jy ! Component: 650 - total flux cleaned = 1.15177 Jy ! Component: 700 - total flux cleaned = 1.15873 Jy ! Component: 750 - total flux cleaned = 1.16493 Jy ! Component: 800 - total flux cleaned = 1.17048 Jy ! Total flux subtracted in 800 components = 1.17048 Jy ! Clean residual min=-0.013075 max=0.021480 Jy/beam ! Clean residual mean=-0.000016 rms=0.003564 Jy/beam ! Combined flux in latest and established models = 1.17048 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.17048 Jy ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=7.125 mas, bpa=-8.595 degrees ! Estimated noise=1.1225 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692138 Jy ! Component: 100 - total flux cleaned = 0.0121984 Jy ! Component: 150 - total flux cleaned = 0.0165436 Jy ! Component: 200 - total flux cleaned = 0.0201929 Jy ! Component: 250 - total flux cleaned = 0.0233682 Jy ! Component: 300 - total flux cleaned = 0.0261669 Jy ! Component: 350 - total flux cleaned = 0.0286362 Jy ! Component: 400 - total flux cleaned = 0.0308152 Jy ! Component: 450 - total flux cleaned = 0.0327379 Jy ! Component: 500 - total flux cleaned = 0.0344379 Jy ! Component: 550 - total flux cleaned = 0.0359457 Jy ! Component: 600 - total flux cleaned = 0.0372838 Jy ! Component: 650 - total flux cleaned = 0.038474 Jy ! Component: 700 - total flux cleaned = 0.0391268 Jy ! Component: 750 - total flux cleaned = 0.0394974 Jy ! Component: 800 - total flux cleaned = 0.0398531 Jy ! Component: 850 - total flux cleaned = 0.0401946 Jy ! Component: 900 - total flux cleaned = 0.0405225 Jy ! Component: 950 - total flux cleaned = 0.0408034 Jy ! Component: 1000 - total flux cleaned = 0.0410742 Jy ! Component: 1050 - total flux cleaned = 0.0413039 Jy ! Component: 1100 - total flux cleaned = 0.0415579 Jy ! Component: 1150 - total flux cleaned = 0.0416514 Jy ! Component: 1200 - total flux cleaned = 0.0416822 Jy ! Total flux subtracted in 1200 components = 0.0416822 Jy ! Clean residual min=-0.010999 max=0.012566 Jy/beam ! Clean residual mean=0.000026 rms=0.002335 Jy/beam ! Combined flux in latest and established models = 1.21216 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help proj ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 1.21216 Jy ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063223Jy sigma=0.964906 ! Fit after self-cal, rms=0.063152Jy sigma=0.963698 selfcal true,true,10. ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063152Jy sigma=0.963698 ! Fit after self-cal, rms=0.059479Jy sigma=0.896286 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.114494Jy sigma=18.735587 ! Fit after self-cal, rms=1.114494Jy sigma=18.735587 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=6.448 mas, bpa=-5.009 degrees ! Estimated noise=1.55531 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.428708 Jy ! Component: 100 - total flux cleaned = 0.688078 Jy ! Component: 150 - total flux cleaned = 0.844999 Jy ! Component: 200 - total flux cleaned = 0.939937 Jy ! Component: 250 - total flux cleaned = 0.997568 Jy ! Component: 300 - total flux cleaned = 1.03741 Jy ! Component: 350 - total flux cleaned = 1.06799 Jy ! Component: 400 - total flux cleaned = 1.09161 Jy ! Component: 450 - total flux cleaned = 1.11003 Jy ! Component: 500 - total flux cleaned = 1.12452 Jy ! Component: 550 - total flux cleaned = 1.1362 Jy ! Component: 600 - total flux cleaned = 1.14579 Jy ! Component: 650 - total flux cleaned = 1.1537 Jy ! Component: 700 - total flux cleaned = 1.16025 Jy ! Component: 750 - total flux cleaned = 1.1657 Jy ! Component: 800 - total flux cleaned = 1.17032 Jy ! Component: 850 - total flux cleaned = 1.17438 Jy ! Component: 900 - total flux cleaned = 1.17801 Jy ! Component: 950 - total flux cleaned = 1.18127 Jy ! Component: 1000 - total flux cleaned = 1.1842 Jy ! Component: 1050 - total flux cleaned = 1.18682 Jy ! Component: 1100 - total flux cleaned = 1.18919 Jy ! Component: 1150 - total flux cleaned = 1.19133 Jy ! Component: 1200 - total flux cleaned = 1.19325 Jy ! Total flux subtracted in 1200 components = 1.19325 Jy ! Clean residual min=-0.005929 max=0.007461 Jy/beam ! Clean residual mean=-0.000025 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 1.19325 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.19325 Jy ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=7.039 mas, bpa=-8.54 degrees ! Estimated noise=1.12088 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258803 Jy ! Component: 100 - total flux cleaned = 0.00455811 Jy ! Component: 150 - total flux cleaned = 0.00618376 Jy ! Component: 200 - total flux cleaned = 0.00754863 Jy ! Component: 250 - total flux cleaned = 0.00870286 Jy ! Component: 300 - total flux cleaned = 0.00970481 Jy ! Component: 350 - total flux cleaned = 0.0105871 Jy ! Component: 400 - total flux cleaned = 0.0113648 Jy ! Component: 450 - total flux cleaned = 0.0120506 Jy ! Component: 500 - total flux cleaned = 0.0124696 Jy ! Component: 550 - total flux cleaned = 0.0127183 Jy ! Component: 600 - total flux cleaned = 0.0129511 Jy ! Component: 650 - total flux cleaned = 0.0131691 Jy ! Component: 700 - total flux cleaned = 0.0133732 Jy ! Component: 750 - total flux cleaned = 0.0135643 Jy ! Component: 800 - total flux cleaned = 0.0137431 Jy ! Component: 850 - total flux cleaned = 0.0139105 Jy ! Component: 900 - total flux cleaned = 0.0140534 Jy ! Component: 950 - total flux cleaned = 0.0142014 Jy ! Component: 1000 - total flux cleaned = 0.0143157 Jy ! Component: 1050 - total flux cleaned = 0.0144126 Jy ! Component: 1100 - total flux cleaned = 0.0145169 Jy ! Component: 1150 - total flux cleaned = 0.0146059 Jy ! Component: 1200 - total flux cleaned = 0.0146917 Jy ! Component: 1250 - total flux cleaned = 0.0147746 Jy ! Component: 1300 - total flux cleaned = 0.0148148 Jy ! Component: 1350 - total flux cleaned = 0.014854 Jy ! Component: 1400 - total flux cleaned = 0.0148922 Jy ! Component: 1450 - total flux cleaned = 0.0149203 Jy ! Component: 1500 - total flux cleaned = 0.0149479 Jy ! Component: 1550 - total flux cleaned = 0.0149838 Jy ! Component: 1600 - total flux cleaned = 0.0150104 Jy ! Component: 1650 - total flux cleaned = 0.0150451 Jy ! Component: 1700 - total flux cleaned = 0.015079 Jy ! Component: 1750 - total flux cleaned = 0.0151039 Jy ! Component: 1800 - total flux cleaned = 0.0151366 Jy ! Component: 1850 - total flux cleaned = 0.0151687 Jy ! Component: 1900 - total flux cleaned = 0.0151923 Jy ! Component: 1950 - total flux cleaned = 0.0152079 Jy ! Component: 2000 - total flux cleaned = 0.0152233 Jy ! Total flux subtracted in 2000 components = 0.0152233 Jy ! Clean residual min=-0.004839 max=0.004235 Jy/beam ! Clean residual mean=-0.000016 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 1.20847 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.114494Jy sigma=18.735587 ! Fit after self-cal, rms=1.114494Jy sigma=18.735587 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=6.448 mas, bpa=-5.009 degrees ! Estimated noise=1.55531 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.428708 Jy ! Component: 100 - total flux cleaned = 0.688078 Jy ! Component: 150 - total flux cleaned = 0.844999 Jy ! Component: 200 - total flux cleaned = 0.939937 Jy ! Component: 250 - total flux cleaned = 0.997568 Jy ! Component: 300 - total flux cleaned = 1.03741 Jy ! Component: 350 - total flux cleaned = 1.06799 Jy ! Component: 400 - total flux cleaned = 1.09161 Jy ! Component: 450 - total flux cleaned = 1.11003 Jy ! Component: 500 - total flux cleaned = 1.12452 Jy ! Component: 550 - total flux cleaned = 1.1362 Jy ! Component: 600 - total flux cleaned = 1.14579 Jy ! Component: 650 - total flux cleaned = 1.1537 Jy ! Component: 700 - total flux cleaned = 1.16025 Jy ! Component: 750 - total flux cleaned = 1.1657 Jy ! Component: 800 - total flux cleaned = 1.17032 Jy ! Component: 850 - total flux cleaned = 1.1744 Jy ! Component: 900 - total flux cleaned = 1.17805 Jy ! Component: 950 - total flux cleaned = 1.18132 Jy ! Component: 1000 - total flux cleaned = 1.18426 Jy ! Component: 1050 - total flux cleaned = 1.1869 Jy ! Component: 1100 - total flux cleaned = 1.18927 Jy ! Component: 1150 - total flux cleaned = 1.19141 Jy ! Component: 1200 - total flux cleaned = 1.19333 Jy ! Total flux subtracted in 1200 components = 1.19333 Jy ! Clean residual min=-0.005939 max=0.007434 Jy/beam ! Clean residual mean=-0.000025 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 1.19334 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.19334 Jy ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=7.039 mas, bpa=-8.54 degrees ! Estimated noise=1.12088 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255396 Jy ! Component: 100 - total flux cleaned = 0.00450214 Jy ! Component: 150 - total flux cleaned = 0.00613341 Jy ! Component: 200 - total flux cleaned = 0.00751998 Jy ! Component: 250 - total flux cleaned = 0.00870878 Jy ! Component: 300 - total flux cleaned = 0.00975673 Jy ! Component: 350 - total flux cleaned = 0.0106956 Jy ! Component: 400 - total flux cleaned = 0.0115377 Jy ! Component: 450 - total flux cleaned = 0.0122945 Jy ! Component: 500 - total flux cleaned = 0.0129777 Jy ! Component: 550 - total flux cleaned = 0.0134284 Jy ! Component: 600 - total flux cleaned = 0.0137083 Jy ! Component: 650 - total flux cleaned = 0.0139935 Jy ! Component: 700 - total flux cleaned = 0.0142409 Jy ! Component: 750 - total flux cleaned = 0.0144931 Jy ! Component: 800 - total flux cleaned = 0.0147124 Jy ! Component: 850 - total flux cleaned = 0.0149193 Jy ! Component: 900 - total flux cleaned = 0.0151305 Jy ! Component: 950 - total flux cleaned = 0.0153141 Jy ! Component: 1000 - total flux cleaned = 0.0154875 Jy ! Component: 1050 - total flux cleaned = 0.0156513 Jy ! Component: 1100 - total flux cleaned = 0.0157938 Jy ! Component: 1150 - total flux cleaned = 0.0159049 Jy ! Component: 1200 - total flux cleaned = 0.0160122 Jy ! Component: 1250 - total flux cleaned = 0.0161157 Jy ! Component: 1300 - total flux cleaned = 0.0161826 Jy ! Component: 1350 - total flux cleaned = 0.0162263 Jy ! Component: 1400 - total flux cleaned = 0.0162692 Jy ! Component: 1450 - total flux cleaned = 0.0163216 Jy ! Component: 1500 - total flux cleaned = 0.0163627 Jy ! Component: 1550 - total flux cleaned = 0.0164131 Jy ! Component: 1600 - total flux cleaned = 0.0164527 Jy ! Component: 1650 - total flux cleaned = 0.0165014 Jy ! Component: 1700 - total flux cleaned = 0.0165396 Jy ! Component: 1750 - total flux cleaned = 0.0165772 Jy ! Component: 1800 - total flux cleaned = 0.0165959 Jy ! Component: 1850 - total flux cleaned = 0.0166234 Jy ! Component: 1900 - total flux cleaned = 0.0166417 Jy ! Component: 1950 - total flux cleaned = 0.0166596 Jy ! Component: 2000 - total flux cleaned = 0.0166775 Jy ! Total flux subtracted in 2000 components = 0.0166775 Jy ! Clean residual min=-0.004624 max=0.003958 Jy/beam ! Clean residual mean=-0.000006 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 1.21001 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.114494Jy sigma=18.735587 ! Fit after self-cal, rms=1.114494Jy sigma=18.735587 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=6.448 mas, bpa=-5.009 degrees ! Estimated noise=1.55531 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.428708 Jy ! Component: 100 - total flux cleaned = 0.688078 Jy ! Component: 150 - total flux cleaned = 0.844999 Jy ! Component: 200 - total flux cleaned = 0.939937 Jy ! Component: 250 - total flux cleaned = 0.997568 Jy ! Component: 300 - total flux cleaned = 1.03741 Jy ! Component: 350 - total flux cleaned = 1.06799 Jy ! Component: 400 - total flux cleaned = 1.09161 Jy ! Component: 450 - total flux cleaned = 1.11003 Jy ! Component: 500 - total flux cleaned = 1.12452 Jy ! Component: 550 - total flux cleaned = 1.1362 Jy ! Component: 600 - total flux cleaned = 1.14579 Jy ! Component: 650 - total flux cleaned = 1.1537 Jy ! Component: 700 - total flux cleaned = 1.16025 Jy ! Component: 750 - total flux cleaned = 1.1657 Jy ! Component: 800 - total flux cleaned = 1.17032 Jy ! Component: 850 - total flux cleaned = 1.1744 Jy ! Component: 900 - total flux cleaned = 1.17805 Jy ! Component: 950 - total flux cleaned = 1.18132 Jy ! Component: 1000 - total flux cleaned = 1.18426 Jy ! Component: 1050 - total flux cleaned = 1.1869 Jy ! Component: 1100 - total flux cleaned = 1.18927 Jy ! Component: 1150 - total flux cleaned = 1.19141 Jy ! Component: 1200 - total flux cleaned = 1.19333 Jy ! Total flux subtracted in 1200 components = 1.19333 Jy ! Clean residual min=-0.005939 max=0.007434 Jy/beam ! Clean residual mean=-0.000025 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 1.19334 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 2000, 0.01 ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.19334 Jy ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=7.039 mas, bpa=-8.54 degrees ! Estimated noise=1.12088 mJy/beam. ! clean: niter=2000 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255396 Jy ! Component: 100 - total flux cleaned = 0.00450214 Jy ! Component: 150 - total flux cleaned = 0.00613341 Jy ! Component: 200 - total flux cleaned = 0.00751998 Jy ! Component: 250 - total flux cleaned = 0.00870878 Jy ! Component: 300 - total flux cleaned = 0.00975673 Jy ! Component: 350 - total flux cleaned = 0.0106956 Jy ! Component: 400 - total flux cleaned = 0.0115377 Jy ! Component: 450 - total flux cleaned = 0.0122945 Jy ! Component: 500 - total flux cleaned = 0.0129777 Jy ! Component: 550 - total flux cleaned = 0.0134284 Jy ! Component: 600 - total flux cleaned = 0.0137083 Jy ! Component: 650 - total flux cleaned = 0.0139935 Jy ! Component: 700 - total flux cleaned = 0.0142409 Jy ! Component: 750 - total flux cleaned = 0.0144931 Jy ! Component: 800 - total flux cleaned = 0.0147124 Jy ! Component: 850 - total flux cleaned = 0.0149193 Jy ! Component: 900 - total flux cleaned = 0.0151305 Jy ! Component: 950 - total flux cleaned = 0.0153141 Jy ! Component: 1000 - total flux cleaned = 0.0154875 Jy ! Component: 1050 - total flux cleaned = 0.0156513 Jy ! Component: 1100 - total flux cleaned = 0.0157938 Jy ! Component: 1150 - total flux cleaned = 0.0159049 Jy ! Component: 1200 - total flux cleaned = 0.0160122 Jy ! Component: 1250 - total flux cleaned = 0.0161157 Jy ! Component: 1300 - total flux cleaned = 0.0161826 Jy ! Component: 1350 - total flux cleaned = 0.0162263 Jy ! Component: 1400 - total flux cleaned = 0.0162692 Jy ! Component: 1450 - total flux cleaned = 0.0163216 Jy ! Component: 1500 - total flux cleaned = 0.0163627 Jy ! Component: 1550 - total flux cleaned = 0.0164131 Jy ! Component: 1600 - total flux cleaned = 0.0164527 Jy ! Component: 1650 - total flux cleaned = 0.0165014 Jy ! Component: 1700 - total flux cleaned = 0.0165396 Jy ! Component: 1750 - total flux cleaned = 0.0165772 Jy ! Component: 1800 - total flux cleaned = 0.0165959 Jy ! Component: 1850 - total flux cleaned = 0.0166234 Jy ! Component: 1900 - total flux cleaned = 0.0166417 Jy ! Component: 1950 - total flux cleaned = 0.0166596 Jy ! Component: 2000 - total flux cleaned = 0.0166775 Jy ! Total flux subtracted in 2000 components = 0.0166775 Jy ! Clean residual min=-0.004624 max=0.003958 Jy/beam ! Clean residual mean=-0.000006 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 1.21001 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help uncalib selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 84 components and 1.21001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058849Jy sigma=0.885823 ! Fit after self-cal, rms=0.058814Jy sigma=0.885299 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058814Jy sigma=0.885299 ! Fit after self-cal, rms=0.058713Jy sigma=0.884228 proj ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.036 mas, bpa=-8.522 degrees ! Estimated noise=1.12047 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.036 at -8.522 degrees (North through East) ! Clean map min=-0.0042494 max=1.0986 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. levs=0.4,0.8,1.6,3.2,6.4,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. levs=0.2,0.4,0.8,1.6,3.2,6.4,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425752 Jy ! Component: 100 - total flux cleaned = -0.00022095 Jy ! Component: 150 - total flux cleaned = -0.000220593 Jy ! Component: 200 - total flux cleaned = -0.000164474 Jy ! Component: 250 - total flux cleaned = -0.000215771 Jy ! Component: 300 - total flux cleaned = -0.000411192 Jy ! Component: 350 - total flux cleaned = -0.000501945 Jy ! Component: 400 - total flux cleaned = -0.000416203 Jy ! Component: 450 - total flux cleaned = -0.000253442 Jy ! Component: 500 - total flux cleaned = 1.94387e-05 Jy ! Component: 550 - total flux cleaned = 5.57047e-05 Jy ! Component: 600 - total flux cleaned = 0.000234756 Jy ! Component: 650 - total flux cleaned = 0.000338547 Jy ! Component: 700 - total flux cleaned = 0.00033945 Jy ! Component: 750 - total flux cleaned = 0.000404807 Jy ! Component: 800 - total flux cleaned = 0.000404178 Jy ! Component: 850 - total flux cleaned = 0.000373861 Jy ! Component: 900 - total flux cleaned = 0.000284215 Jy ! Component: 950 - total flux cleaned = 0.00019659 Jy ! Component: 1000 - total flux cleaned = 0.000139405 Jy ! Component: 1050 - total flux cleaned = 8.38431e-05 Jy ! Component: 1100 - total flux cleaned = 0.000110684 Jy ! Component: 1150 - total flux cleaned = 3.29349e-06 Jy ! Component: 1200 - total flux cleaned = -7.53458e-05 Jy ! Component: 1250 - total flux cleaned = -0.000202663 Jy ! Component: 1300 - total flux cleaned = -0.000302624 Jy ! Component: 1350 - total flux cleaned = -0.000450546 Jy ! Component: 1400 - total flux cleaned = -0.000571421 Jy ! Component: 1450 - total flux cleaned = -0.000665667 Jy ! Component: 1500 - total flux cleaned = -0.000735832 Jy ! Component: 1550 - total flux cleaned = -0.000873579 Jy ! Component: 1600 - total flux cleaned = -0.000986417 Jy ! Component: 1650 - total flux cleaned = -0.00111956 Jy ! Component: 1700 - total flux cleaned = -0.00122882 Jy ! Component: 1750 - total flux cleaned = -0.00135735 Jy ! Component: 1800 - total flux cleaned = -0.00152647 Jy ! Component: 1850 - total flux cleaned = -0.00169329 Jy ! Component: 1900 - total flux cleaned = -0.0018372 Jy ! Component: 1950 - total flux cleaned = -0.00197943 Jy ! Component: 2000 - total flux cleaned = -0.00215928 Jy ! Component: 2050 - total flux cleaned = -0.00237563 Jy ! Component: 2100 - total flux cleaned = -0.00255023 Jy ! Component: 2150 - total flux cleaned = -0.00266532 Jy ! Component: 2200 - total flux cleaned = -0.0027788 Jy ! Component: 2250 - total flux cleaned = -0.0029286 Jy ! Component: 2300 - total flux cleaned = -0.00309469 Jy ! Component: 2350 - total flux cleaned = -0.00325894 Jy ! Component: 2400 - total flux cleaned = -0.00343916 Jy ! Component: 2450 - total flux cleaned = -0.00358199 Jy ! Component: 2500 - total flux cleaned = -0.0037587 Jy ! Component: 2550 - total flux cleaned = -0.00393387 Jy ! Component: 2600 - total flux cleaned = -0.00409039 Jy ! Component: 2650 - total flux cleaned = -0.00424576 Jy ! Component: 2700 - total flux cleaned = -0.00440003 Jy ! Component: 2750 - total flux cleaned = -0.00453624 Jy ! Component: 2800 - total flux cleaned = -0.00472232 Jy ! Component: 2850 - total flux cleaned = -0.00482326 Jy ! Component: 2900 - total flux cleaned = -0.00499052 Jy ! Component: 2950 - total flux cleaned = -0.00509025 Jy ! Component: 3000 - total flux cleaned = -0.00523916 Jy ! Component: 3050 - total flux cleaned = -0.0053709 Jy ! Component: 3100 - total flux cleaned = -0.0055186 Jy ! Component: 3150 - total flux cleaned = -0.00568211 Jy ! Component: 3200 - total flux cleaned = -0.00581258 Jy ! Component: 3250 - total flux cleaned = -0.00591007 Jy ! Component: 3300 - total flux cleaned = -0.00599116 Jy ! Component: 3350 - total flux cleaned = -0.00607218 Jy ! Component: 3400 - total flux cleaned = -0.00618544 Jy ! Component: 3450 - total flux cleaned = -0.00626624 Jy ! Component: 3500 - total flux cleaned = -0.00633073 Jy ! Component: 3550 - total flux cleaned = -0.00639535 Jy ! Component: 3600 - total flux cleaned = -0.00647606 Jy ! Component: 3650 - total flux cleaned = -0.0065083 Jy ! Component: 3700 - total flux cleaned = -0.00662112 Jy ! Component: 3750 - total flux cleaned = -0.00673391 Jy ! Component: 3800 - total flux cleaned = -0.00681449 Jy ! Component: 3850 - total flux cleaned = -0.00687895 Jy ! Component: 3900 - total flux cleaned = -0.00700823 Jy ! Component: 3950 - total flux cleaned = -0.0071215 Jy ! Component: 4000 - total flux cleaned = -0.00721869 Jy ! Component: 4050 - total flux cleaned = -0.00729992 Jy ! Total flux subtracted in 4096 components = -0.0073975 Jy ! Clean residual min=-0.000918 max=0.001165 Jy/beam ! Clean residual mean=-0.000003 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 1.20262 Jy levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.036 at -8.522 degrees (North through East) ! Clean map min=-0.00091754 max=1.0985 Jy/beam ! Clean map min=-0.0025907 max=1.0985 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. save J0211+1051_S ! Writing UV FITS file: J0211+1051_S.uvf ! Writing 378 model components to file: J0211+1051_S.mod ! wwins: Wrote 8 windows to J0211+1051_S.win ! Adding 294 model components to the UV plane model. ! The established model now contains 378 components and 1.20262 Jy ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.036 at -8.522 degrees (North through East) ! Clean map min=-0.0020813 max=1.0985 Jy/beam ! Writing clean map to FITS file: J0211+1051_S.fits ! Writing difmap environment to: J0211+1051_S.par quit ! Quitting program ! Log file difmap.log_65 closed on Thu Apr 7 21:56:59 2016