! Started logfile: /scr/pima/bg219a_uvs/J2358-1020_X_dfm.log on Fri May 20 00:25:00 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J2358-1020_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2358-1020_X_uva.fits
! AN table 1: 27 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.622222 visibilities/baseline/integration-bin.
! Found source: J2358-1020
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 3024 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2358-1020_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.613750Jy  sigma=28.434652
! Fit after  self-cal, rms=0.360543Jy  sigma=6.473119
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6196 mas, bmaj=1.807 mas, bpa=7.346 degrees
! Estimated noise=1.29901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.902077 Jy
! Component: 100  -  total flux cleaned = 1.1288 Jy
! Total flux subtracted in 100 components = 1.1288 Jy
! Clean residual min=-0.064063 max=0.090797 Jy/beam
! Clean residual mean=0.000117 rms=0.016799 Jy/beam
! Combined flux in latest and established models = 1.1288 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.1288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.294622Jy  sigma=5.293029
! Fit after  self-cal, rms=0.294562Jy  sigma=5.292012
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7472 mas, bmaj=2.148 mas, bpa=9.539 degrees
! Estimated noise=0.835426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12326 Jy
! Component: 100  -  total flux cleaned = 0.179083 Jy
! Component: 150  -  total flux cleaned = 0.207834 Jy
! Component: 200  -  total flux cleaned = 0.223466 Jy
! Total flux subtracted in 200 components = 0.223466 Jy
! Clean residual min=-0.024151 max=0.036849 Jy/beam
! Clean residual mean=0.000041 rms=0.007145 Jy/beam
! Combined flux in latest and established models = 1.35227 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 26 components and 1.35227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.246010Jy  sigma=4.375027
! Fit after  self-cal, rms=0.245985Jy  sigma=4.374833
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7472 x 2.148 at 9.539 degrees (North through East)
! Clean map  min=-0.022542  max=1.2109 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.02     NL        0.98     OV        1.06     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        0.97     OV        1.05     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.07     NL        0.98     OV        1.05     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.04     NL        0.99     OV        1.04     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        0.99     OV        1.06     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.05     NL        0.98     OV        1.04     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.06     NL        0.96     OV        1.05     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.05     NL        0.98     OV        1.05     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        0.98     OV        1.06     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.06     NL        0.96     OV        1.04     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        0.95     OV        1.09     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.06     NL        0.94     OV        1.07     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.245985Jy  sigma=4.374833
! Fit after  self-cal, rms=0.232498Jy  sigma=4.105381
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7704 mas, bmaj=2.074 mas, bpa=8.021 degrees
! Estimated noise=0.882704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000877455 Jy
! Component: 100  -  total flux cleaned = 0.00130795 Jy
! Component: 150  -  total flux cleaned = 0.00148437 Jy
! Component: 200  -  total flux cleaned = 0.00147725 Jy
! Total flux subtracted in 200 components = 0.00147725 Jy
! Clean residual min=-0.014906 max=0.016533 Jy/beam
! Clean residual mean=-0.000009 rms=0.003316 Jy/beam
! Combined flux in latest and established models = 1.35374 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 29 components and 1.35374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232166Jy  sigma=4.100607
! Fit after  self-cal, rms=0.232166Jy  sigma=4.100554
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232166Jy  sigma=4.100554
! Fit after  self-cal, rms=0.233239Jy  sigma=4.061779
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7699 mas, bmaj=2.077 mas, bpa=7.92 degrees
! Estimated noise=0.880637 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00172623 Jy
! Component: 100  -  total flux cleaned = -0.00189534 Jy
! Component: 150  -  total flux cleaned = -0.00197472 Jy
! Component: 200  -  total flux cleaned = -0.00197573 Jy
! Total flux subtracted in 200 components = -0.00197573 Jy
! Clean residual min=-0.006713 max=0.006786 Jy/beam
! Clean residual mean=0.000009 rms=0.001532 Jy/beam
! Combined flux in latest and established models = 1.35177 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 33 components and 1.35177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.233163Jy  sigma=4.061072
! Fit after  self-cal, rms=0.233160Jy  sigma=4.061035
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00303878 Jy
! Component: 100  -  total flux cleaned = 0.00304679 Jy
! Component: 150  -  total flux cleaned = 0.00323868 Jy
! Component: 200  -  total flux cleaned = 0.0035073 Jy
! Total flux subtracted in 200 components = 0.0035073 Jy
! Clean residual min=-0.005971 max=0.005572 Jy/beam
! Clean residual mean=0.000006 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 1.35527 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 51 components and 1.35528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232969Jy  sigma=4.058428
! Fit after  self-cal, rms=0.232956Jy  sigma=4.058235
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232956Jy  sigma=4.058235
! Fit after  self-cal, rms=0.232722Jy  sigma=4.057801
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7702 mas, bmaj=2.077 mas, bpa=7.952 degrees
! Estimated noise=0.879777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107701 Jy
! Component: 100  -  total flux cleaned = 0.000809436 Jy
! Component: 150  -  total flux cleaned = 0.000512684 Jy
! Component: 200  -  total flux cleaned = 0.000186327 Jy
! Total flux subtracted in 200 components = 0.000186327 Jy
! Clean residual min=-0.005431 max=0.004727 Jy/beam
! Clean residual mean=0.000007 rms=0.001258 Jy/beam
! Combined flux in latest and established models = 1.35546 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 1.35546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232656Jy  sigma=4.057074
! Fit after  self-cal, rms=0.232654Jy  sigma=4.057017
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000300385 Jy
! Component: 100  -  total flux cleaned = 6.97618e-05 Jy
! Component: 150  -  total flux cleaned = -0.000196326 Jy
! Component: 200  -  total flux cleaned = -0.000442526 Jy
! Total flux subtracted in 200 components = -0.000442526 Jy
! Clean residual min=-0.005285 max=0.004671 Jy/beam
! Clean residual mean=0.000007 rms=0.001216 Jy/beam
! Combined flux in latest and established models = 1.35502 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 1.35502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232622Jy  sigma=4.056759
! Fit after  self-cal, rms=0.232622Jy  sigma=4.056742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232622Jy  sigma=4.056742
! Fit after  self-cal, rms=0.232481Jy  sigma=4.056576
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.013 mas, bmaj=5.051 mas, bpa=-2.478 degrees
! Estimated noise=1.20917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00206018 Jy
! Component: 100  -  total flux cleaned = -0.00234642 Jy
! Component: 150  -  total flux cleaned = -0.00272687 Jy
! Component: 200  -  total flux cleaned = -0.00304156 Jy
! Total flux subtracted in 200 components = -0.00304156 Jy
! Clean residual min=-0.006856 max=0.006643 Jy/beam
! Clean residual mean=0.000023 rms=0.001913 Jy/beam
! Combined flux in latest and established models = 1.35198 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 1.35198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232482Jy  sigma=4.056869
! Fit after  self-cal, rms=0.232479Jy  sigma=4.056811
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110899 Jy
! Component: 100  -  total flux cleaned = -0.000110291 Jy
! Component: 150  -  total flux cleaned = -0.000143455 Jy
! Component: 200  -  total flux cleaned = -0.000143464 Jy
! Total flux subtracted in 200 components = -0.000143464 Jy
! Clean residual min=-0.006776 max=0.006477 Jy/beam
! Clean residual mean=0.000023 rms=0.001878 Jy/beam
! Combined flux in latest and established models = 1.35183 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 74 components and 1.35183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232485Jy  sigma=4.056923
! Fit after  self-cal, rms=0.232484Jy  sigma=4.056919
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7705 mas, bmaj=2.078 mas, bpa=7.965 degrees
! Estimated noise=0.879288 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7705 x 2.078 at 7.965 degrees (North through East)
! Clean map  min=-0.0059741  max=1.2 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232484Jy  sigma=4.056919
! Fit after  self-cal, rms=0.215553Jy  sigma=3.755047
! Inverting map and beam 
! Estimated beam: bmin=0.7724 mas, bmaj=2.084 mas, bpa=8.156 degrees
! Estimated noise=0.837975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0389075 Jy
! Component: 100  -  total flux cleaned = -0.0389061 Jy
! Component: 150  -  total flux cleaned = -0.0388235 Jy
! Component: 200  -  total flux cleaned = -0.0403779 Jy
! Total flux subtracted in 200 components = -0.0403779 Jy
! Clean residual min=-0.013250 max=0.019226 Jy/beam
! Clean residual mean=-0.000002 rms=0.003641 Jy/beam
! Combined flux in latest and established models = 1.31146 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 1.31146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.205352Jy  sigma=3.600250
! Fit after  self-cal, rms=0.205295Jy  sigma=3.598400
! Inverting map 
! Added new window around map position (2.4, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141001 Jy
! Component: 100  -  total flux cleaned = 0.0162182 Jy
! Component: 150  -  total flux cleaned = 0.0159623 Jy
! Component: 200  -  total flux cleaned = 0.0155258 Jy
! Total flux subtracted in 200 components = 0.0155258 Jy
! Clean residual min=-0.009768 max=0.010203 Jy/beam
! Clean residual mean=-0.000013 rms=0.002422 Jy/beam
! Combined flux in latest and established models = 1.32698 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 100 components and 1.32698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.203593Jy  sigma=3.577731
! Fit after  self-cal, rms=0.203455Jy  sigma=3.575046
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.203455Jy  sigma=3.575046
! Fit after  self-cal, rms=0.195618Jy  sigma=3.408838
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6302 mas, bmaj=1.818 mas, bpa=7.591 degrees
! Estimated noise=1.14407 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.834992 Jy
! Component: 100  -  total flux cleaned = 1.03384 Jy
! Component: 150  -  total flux cleaned = 1.11256 Jy
! Component: 200  -  total flux cleaned = 1.15591 Jy
! Total flux subtracted in 200 components = 1.15591 Jy
! Clean residual min=-0.025573 max=0.033828 Jy/beam
! Clean residual mean=0.000050 rms=0.006284 Jy/beam
! Combined flux in latest and established models = 1.15591 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 1.15591 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.774 mas, bmaj=2.089 mas, bpa=8.267 degrees
! Estimated noise=0.805135 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0432002 Jy
! Component: 100  -  total flux cleaned = 0.0695486 Jy
! Component: 150  -  total flux cleaned = 0.0882091 Jy
! Component: 200  -  total flux cleaned = 0.098859 Jy
! Total flux subtracted in 200 components = 0.098859 Jy
! Clean residual min=-0.010243 max=0.011747 Jy/beam
! Clean residual mean=0.000012 rms=0.002791 Jy/beam
! Combined flux in latest and established models = 1.25477 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 59 components and 1.25477 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.008 mas, bmaj=5.108 mas, bpa=-2.288 degrees
! Estimated noise=1.10069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158623 Jy
! Component: 100  -  total flux cleaned = 0.0239075 Jy
! Component: 150  -  total flux cleaned = 0.0263497 Jy
! Component: 200  -  total flux cleaned = 0.0276656 Jy
! Total flux subtracted in 200 components = 0.0276656 Jy
! Clean residual min=-0.007769 max=0.007970 Jy/beam
! Clean residual mean=-0.000016 rms=0.002405 Jy/beam
! Combined flux in latest and established models = 1.28243 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00059737 Jy
! Component: 100  -  total flux cleaned = 0.000957647 Jy
! Component: 150  -  total flux cleaned = 0.00137174 Jy
! Component: 200  -  total flux cleaned = 0.00174235 Jy
! Total flux subtracted in 200 components = 0.00174235 Jy
! Clean residual min=-0.006765 max=0.006117 Jy/beam
! Clean residual mean=-0.000021 rms=0.002124 Jy/beam
! Combined flux in latest and established models = 1.28417 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 107 components and 1.28417 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.774 mas, bmaj=2.089 mas, bpa=8.267 degrees
! Estimated noise=0.805135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000754505 Jy
! Component: 100  -  total flux cleaned = 0.000439036 Jy
! Component: 150  -  total flux cleaned = 0.0010089 Jy
! Component: 200  -  total flux cleaned = 0.001343 Jy
! Total flux subtracted in 200 components = 0.001343 Jy
! Clean residual min=-0.005614 max=0.005656 Jy/beam
! Clean residual mean=-0.000009 rms=0.001389 Jy/beam
! Combined flux in latest and established models = 1.28552 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 122 components and 1.28552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.184608Jy  sigma=3.265086
! Fit after  self-cal, rms=0.184592Jy  sigma=3.264603
wmodel /J2358-1020_X_map.mod
! wmodel: Unable to open new model file: /J2358-1020_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2358-1020_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.774 x 2.089 at 8.267 degrees (North through East)
! Clean map  min=-0.0064137  max=1.0718 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2358-1020_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.07179 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00136776 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.382841 0.382841 0.765683 1.53137 3.06273 6.12546 12.2509 24.5018 49.0037 98.0074
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0041 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  783.614 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2358-1020_X_dfm.log closed on Fri May 20 00:25:02 2016