! Started logfile: /scr/pima/bg219a_uvs/J2358-1020_S_dfm.log on Fri May 20 00:24:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2358-1020_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2358-1020_S_uva.fits
! AN table 1: 27 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.622222 visibilities/baseline/integration-bin.
! Found source: J2358-1020
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1008 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2358-1020_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.319491Jy  sigma=23.617058
! Fit after  self-cal, rms=0.226475Jy  sigma=3.909677
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.516 mas, bmaj=6.857 mas, bpa=5.119 degrees
! Estimated noise=1.73177 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.605977 Jy
! Component: 100  -  total flux cleaned = 0.745508 Jy
! Total flux subtracted in 100 components = 0.745508 Jy
! Clean residual min=-0.020972 max=0.050418 Jy/beam
! Clean residual mean=0.000003 rms=0.007056 Jy/beam
! Combined flux in latest and established models = 0.745508 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.745508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096800Jy  sigma=1.582721
! Fit after  self-cal, rms=0.096805Jy  sigma=1.582659
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0483913 Jy
! Component: 100  -  total flux cleaned = 0.0666147 Jy
! Total flux subtracted in 100 components = 0.0666147 Jy
! Clean residual min=-0.013004 max=0.013844 Jy/beam
! Clean residual mean=0.000001 rms=0.003385 Jy/beam
! Combined flux in latest and established models = 0.812122 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.812122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069580Jy  sigma=1.120105
! Fit after  self-cal, rms=0.069580Jy  sigma=1.119710
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.91 mas, bmaj=8.154 mas, bpa=6.769 degrees
! Estimated noise=1.40531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00818742 Jy
! Component: 100  -  total flux cleaned = 0.0105831 Jy
! Component: 150  -  total flux cleaned = 0.0110259 Jy
! Component: 200  -  total flux cleaned = 0.0113106 Jy
! Total flux subtracted in 200 components = 0.0113106 Jy
! Clean residual min=-0.011023 max=0.009485 Jy/beam
! Clean residual mean=0.000008 rms=0.002705 Jy/beam
! Combined flux in latest and established models = 0.823433 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 30 components and 0.823433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068486Jy  sigma=1.108876
! Fit after  self-cal, rms=0.068479Jy  sigma=1.108787
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.91 x 8.154 at 6.769 degrees (North through East)
! Clean map  min=-0.010509  max=0.78432 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.04     NL        0.98     OV        1.03     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.00     NL        0.99     OV        1.03     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.01     NL        0.96     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        0.94     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.068479Jy  sigma=1.108787
! Fit after  self-cal, rms=0.062174Jy  sigma=1.003824
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.952 mas, bmaj=7.885 mas, bpa=4.805 degrees
! Estimated noise=1.49022 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000868934 Jy
! Component: 100  -  total flux cleaned = 0.00113511 Jy
! Component: 150  -  total flux cleaned = 0.00114026 Jy
! Component: 200  -  total flux cleaned = 0.00114125 Jy
! Total flux subtracted in 200 components = 0.00114125 Jy
! Clean residual min=-0.006883 max=0.006249 Jy/beam
! Clean residual mean=0.000004 rms=0.001757 Jy/beam
! Combined flux in latest and established models = 0.824574 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 38 components and 0.824574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061934Jy  sigma=1.001042
! Fit after  self-cal, rms=0.061927Jy  sigma=1.000812
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061927Jy  sigma=1.000812
! Fit after  self-cal, rms=0.059808Jy  sigma=0.968163
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.895 mas, bpa=4.767 degrees
! Estimated noise=1.48983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.23975e-05 Jy
! Component: 100  -  total flux cleaned = 5.27353e-05 Jy
! Component: 150  -  total flux cleaned = 9.17279e-05 Jy
! Component: 200  -  total flux cleaned = 0.000127297 Jy
! Total flux subtracted in 200 components = 0.000127297 Jy
! Clean residual min=-0.004573 max=0.004802 Jy/beam
! Clean residual mean=0.000001 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 0.824702 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 45 components and 0.824702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059747Jy  sigma=0.967304
! Fit after  self-cal, rms=0.059747Jy  sigma=0.967199
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.57944e-05 Jy
! Component: 100  -  total flux cleaned = 8.87743e-05 Jy
! Component: 150  -  total flux cleaned = 6.20123e-05 Jy
! Component: 200  -  total flux cleaned = 6.28651e-05 Jy
! Total flux subtracted in 200 components = 6.28651e-05 Jy
! Clean residual min=-0.004498 max=0.004763 Jy/beam
! Clean residual mean=0.000001 rms=0.001103 Jy/beam
! Combined flux in latest and established models = 0.824764 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.824764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059710Jy  sigma=0.966695
! Fit after  self-cal, rms=0.059709Jy  sigma=0.966617
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059709Jy  sigma=0.966617
! Fit after  self-cal, rms=0.059717Jy  sigma=0.966519
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=7.895 mas, bpa=4.777 degrees
! Estimated noise=1.49015 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.71783e-05 Jy
! Component: 100  -  total flux cleaned = 2.74147e-05 Jy
! Component: 150  -  total flux cleaned = 5.70655e-05 Jy
! Component: 200  -  total flux cleaned = 5.68798e-05 Jy
! Total flux subtracted in 200 components = 5.68798e-05 Jy
! Clean residual min=-0.004351 max=0.004693 Jy/beam
! Clean residual mean=0.000001 rms=0.001086 Jy/beam
! Combined flux in latest and established models = 0.824821 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 47 components and 0.824821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059684Jy  sigma=0.966094
! Fit after  self-cal, rms=0.059686Jy  sigma=0.966051
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-126.5, -101.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00297728 Jy
! Component: 100  -  total flux cleaned = 0.00307916 Jy
! Component: 150  -  total flux cleaned = 0.00307966 Jy
! Component: 200  -  total flux cleaned = 0.00320649 Jy
! Total flux subtracted in 200 components = 0.00320649 Jy
! Clean residual min=-0.003974 max=0.004476 Jy/beam
! Clean residual mean=-0.000000 rms=0.000998 Jy/beam
! Combined flux in latest and established models = 0.828028 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 71 components and 0.828028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059269Jy  sigma=0.960812
! Fit after  self-cal, rms=0.059266Jy  sigma=0.960344
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059266Jy  sigma=0.960344
! Fit after  self-cal, rms=0.059201Jy  sigma=0.959750
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.331 mas, bmaj=17.77 mas, bpa=-0.2953 degrees
! Estimated noise=1.91017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000409378 Jy
! Component: 100  -  total flux cleaned = 0.000466723 Jy
! Component: 150  -  total flux cleaned = 0.000516994 Jy
! Component: 200  -  total flux cleaned = 0.000539401 Jy
! Total flux subtracted in 200 components = 0.000539401 Jy
! Clean residual min=-0.002480 max=0.003593 Jy/beam
! Clean residual mean=-0.000001 rms=0.000915 Jy/beam
! Combined flux in latest and established models = 0.828567 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 74 components and 0.828567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059187Jy  sigma=0.959573
! Fit after  self-cal, rms=0.059181Jy  sigma=0.959544
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.87063e-05 Jy
! Component: 100  -  total flux cleaned = 6.89037e-05 Jy
! Component: 150  -  total flux cleaned = 6.88613e-05 Jy
! Component: 200  -  total flux cleaned = 8.66203e-05 Jy
! Total flux subtracted in 200 components = 8.66203e-05 Jy
! Clean residual min=-0.002507 max=0.003626 Jy/beam
! Clean residual mean=0.000001 rms=0.000909 Jy/beam
! Combined flux in latest and established models = 0.828654 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 75 components and 0.828654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059186Jy  sigma=0.959599
! Fit after  self-cal, rms=0.059182Jy  sigma=0.959577
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=7.896 mas, bpa=4.791 degrees
! Estimated noise=1.48966 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.955 x 7.896 at 4.791 degrees (North through East)
! Clean map  min=-0.0034007  max=0.78122 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059182Jy  sigma=0.959577
! Fit after  self-cal, rms=0.049108Jy  sigma=0.754764
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.893 mas, bpa=4.776 degrees
! Estimated noise=1.48837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000646818 Jy
! Component: 100  -  total flux cleaned = 0.000969346 Jy
! Component: 150  -  total flux cleaned = 0.00102145 Jy
! Component: 200  -  total flux cleaned = 0.000970682 Jy
! Total flux subtracted in 200 components = 0.000970682 Jy
! Clean residual min=-0.003729 max=0.004005 Jy/beam
! Clean residual mean=0.000000 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.829625 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 88 components and 0.829625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048918Jy  sigma=0.752586
! Fit after  self-cal, rms=0.048931Jy  sigma=0.752398
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000410182 Jy
! Component: 100  -  total flux cleaned = 0.000410568 Jy
! Component: 150  -  total flux cleaned = 0.000410585 Jy
! Component: 200  -  total flux cleaned = 0.000372178 Jy
! Total flux subtracted in 200 components = 0.000372178 Jy
! Clean residual min=-0.003635 max=0.003794 Jy/beam
! Clean residual mean=0.000000 rms=0.000906 Jy/beam
! Combined flux in latest and established models = 0.829997 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.829997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048837Jy  sigma=0.751508
! Fit after  self-cal, rms=0.048849Jy  sigma=0.751422
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048849Jy  sigma=0.751422
! Fit after  self-cal, rms=0.048841Jy  sigma=0.751063
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.524 mas, bmaj=6.855 mas, bpa=5.159 degrees
! Estimated noise=1.77462 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.606249 Jy
! Component: 100  -  total flux cleaned = 0.745279 Jy
! Component: 150  -  total flux cleaned = 0.792914 Jy
! Component: 200  -  total flux cleaned = 0.810735 Jy
! Total flux subtracted in 200 components = 0.810735 Jy
! Clean residual min=-0.007620 max=0.007126 Jy/beam
! Clean residual mean=0.000001 rms=0.001817 Jy/beam
! Combined flux in latest and established models = 0.810735 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.810735 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.893 mas, bpa=4.773 degrees
! Estimated noise=1.48859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00842679 Jy
! Component: 100  -  total flux cleaned = 0.0122244 Jy
! Component: 150  -  total flux cleaned = 0.0146113 Jy
! Component: 200  -  total flux cleaned = 0.0163584 Jy
! Total flux subtracted in 200 components = 0.0163584 Jy
! Clean residual min=-0.004395 max=0.004121 Jy/beam
! Clean residual mean=-0.000004 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 0.827093 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 35 components and 0.827093 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.33 mas, bmaj=17.77 mas, bpa=-0.3085 degrees
! Estimated noise=1.9095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157555 Jy
! Component: 100  -  total flux cleaned = 0.00151569 Jy
! Component: 150  -  total flux cleaned = 0.00161055 Jy
! Component: 200  -  total flux cleaned = 0.0016971 Jy
! Total flux subtracted in 200 components = 0.0016971 Jy
! Clean residual min=-0.002762 max=0.003484 Jy/beam
! Clean residual mean=-0.000002 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.82879 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.80793e-05 Jy
! Component: 100  -  total flux cleaned = 0.00017608 Jy
! Component: 150  -  total flux cleaned = 0.00023378 Jy
! Component: 200  -  total flux cleaned = 0.000311213 Jy
! Total flux subtracted in 200 components = 0.000311213 Jy
! Clean residual min=-0.002616 max=0.003375 Jy/beam
! Clean residual mean=-0.000002 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.829102 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.829102 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.893 mas, bpa=4.773 degrees
! Estimated noise=1.48859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120104 Jy
! Component: 100  -  total flux cleaned = 0.00120561 Jy
! Component: 150  -  total flux cleaned = 0.00120572 Jy
! Component: 200  -  total flux cleaned = 0.0011352 Jy
! Total flux subtracted in 200 components = 0.0011352 Jy
! Clean residual min=-0.003910 max=0.003831 Jy/beam
! Clean residual mean=-0.000001 rms=0.000966 Jy/beam
! Combined flux in latest and established models = 0.830237 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 61 components and 0.830237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049127Jy  sigma=0.754647
! Fit after  self-cal, rms=0.049110Jy  sigma=0.754279
wmodel /J2358-1020_S_map.mod
! wmodel: Unable to open new model file: /J2358-1020_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2358-1020_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.954 x 7.893 at 4.773 degrees (North through East)
! Clean map  min=-0.0036491  max=0.77976 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2358-1020_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.779762 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000949256 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.36521 0.36521 0.730419 1.46084 2.92168 5.84335 11.6867 23.3734 46.7468 93.4937
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0028 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.779 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  821.446 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2358-1020_S_dfm.log closed on Fri May 20 00:24:59 2016