! Started logfile: /scr/pima/bg219a_uvs/J2358+3922_X_dfm.log on Fri May 20 00:24:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J2358+3922_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2358+3922_X_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2358+3922
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2358+3922_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004261Jy  sigma=27.898732
! Fit after  self-cal, rms=0.827678Jy  sigma=22.720491
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7071 mas, bmaj=1.294 mas, bpa=-5.72 degrees
! Estimated noise=0.778454 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12431 Jy
! Component: 100  -  total flux cleaned = 0.167868 Jy
! Total flux subtracted in 100 components = 0.167868 Jy
! Clean residual min=-0.028149 max=0.042843 Jy/beam
! Clean residual mean=-0.000015 rms=0.007098 Jy/beam
! Combined flux in latest and established models = 0.167869 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.167869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113388Jy  sigma=3.149130
! Fit after  self-cal, rms=0.112795Jy  sigma=3.136436
! Inverting map 
! Added new window around map position (6.6, -5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0377999 Jy
! Component: 100  -  total flux cleaned = 0.0578605 Jy
! Total flux subtracted in 100 components = 0.0578605 Jy
! Clean residual min=-0.019716 max=0.034282 Jy/beam
! Clean residual mean=-0.000011 rms=0.005227 Jy/beam
! Combined flux in latest and established models = 0.225729 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.225729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092245Jy  sigma=2.529421
! Fit after  self-cal, rms=0.089921Jy  sigma=2.454135
! Inverting map 
! Added new window around map position (-1.4, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.030344 Jy
! Component: 100  -  total flux cleaned = 0.0495342 Jy
! Total flux subtracted in 100 components = 0.0495342 Jy
! Clean residual min=-0.012727 max=0.015399 Jy/beam
! Clean residual mean=-0.000008 rms=0.003099 Jy/beam
! Combined flux in latest and established models = 0.275263 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.275263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073477Jy  sigma=1.946627
! Fit after  self-cal, rms=0.072780Jy  sigma=1.923440
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9175 mas, bmaj=1.658 mas, bpa=-2.987 degrees
! Estimated noise=0.377548 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0239235 Jy
! Component: 100  -  total flux cleaned = 0.0383686 Jy
! Component: 150  -  total flux cleaned = 0.0481719 Jy
! Component: 200  -  total flux cleaned = 0.0551079 Jy
! Total flux subtracted in 200 components = 0.0551079 Jy
! Clean residual min=-0.007660 max=0.011384 Jy/beam
! Clean residual mean=-0.000018 rms=0.002099 Jy/beam
! Combined flux in latest and established models = 0.330371 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 55 components and 0.330371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064178Jy  sigma=1.644641
! Fit after  self-cal, rms=0.063903Jy  sigma=1.635900
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9175 x 1.658 at -2.987 degrees (North through East)
! Clean map  min=-0.0066768  max=0.1613 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.92     NL        1.02     OV        1.03     
!   PT        0.99     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.99     NL        0.99     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.97     NL        1.04     OV        1.00     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.98     NL        1.00     OV        1.02     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.03     NL        1.02     OV        1.01     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.14     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.00     OV        0.99     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.06     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.92     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.06     NL        1.02     OV        0.98     
!   PT        0.96     SC        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.06     NL        1.02     OV        1.02     
!   PT        0.97     SC        0.91     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.12     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.88     
! 
! 
! Fit before self-cal, rms=0.063903Jy  sigma=1.635900
! Fit after  self-cal, rms=0.062580Jy  sigma=1.613034
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9183 mas, bmaj=1.658 mas, bpa=-2.004 degrees
! Estimated noise=0.369965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.6, 6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580002 Jy
! Component: 100  -  total flux cleaned = 0.00663472 Jy
! Component: 150  -  total flux cleaned = 0.0074217 Jy
! Component: 200  -  total flux cleaned = 0.00796581 Jy
! Total flux subtracted in 200 components = 0.00796581 Jy
! Clean residual min=-0.004657 max=0.004664 Jy/beam
! Clean residual mean=-0.000007 rms=0.001257 Jy/beam
! Combined flux in latest and established models = 0.338337 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 0.338337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061509Jy  sigma=1.582163
! Fit after  self-cal, rms=0.061442Jy  sigma=1.580555
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061442Jy  sigma=1.580555
! Fit after  self-cal, rms=0.060751Jy  sigma=1.570169
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9164 mas, bmaj=1.665 mas, bpa=-2.28 degrees
! Estimated noise=0.367348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.53993e-05 Jy
! Component: 100  -  total flux cleaned = -0.000149682 Jy
! Component: 150  -  total flux cleaned = -0.000280874 Jy
! Component: 200  -  total flux cleaned = -0.000340156 Jy
! Total flux subtracted in 200 components = -0.000340156 Jy
! Clean residual min=-0.003780 max=0.003517 Jy/beam
! Clean residual mean=-0.000001 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.337997 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.337997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060564Jy  sigma=1.565404
! Fit after  self-cal, rms=0.060556Jy  sigma=1.565075
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254158 Jy
! Component: 100  -  total flux cleaned = -0.0002058 Jy
! Component: 150  -  total flux cleaned = -0.000160329 Jy
! Component: 200  -  total flux cleaned = -0.000159838 Jy
! Total flux subtracted in 200 components = -0.000159838 Jy
! Clean residual min=-0.003667 max=0.003385 Jy/beam
! Clean residual mean=-0.000002 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.337837 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 84 components and 0.337837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060476Jy  sigma=1.563164
! Fit after  self-cal, rms=0.060475Jy  sigma=1.563045
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060475Jy  sigma=1.563045
! Fit after  self-cal, rms=0.060503Jy  sigma=1.562673
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9163 mas, bmaj=1.666 mas, bpa=-2.181 degrees
! Estimated noise=0.366975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0008128 Jy
! Component: 100  -  total flux cleaned = -0.000943153 Jy
! Component: 150  -  total flux cleaned = -0.000982519 Jy
! Component: 200  -  total flux cleaned = -0.00101843 Jy
! Total flux subtracted in 200 components = -0.00101843 Jy
! Clean residual min=-0.003493 max=0.003329 Jy/beam
! Clean residual mean=-0.000001 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.336818 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 89 components and 0.336818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060442Jy  sigma=1.561293
! Fit after  self-cal, rms=0.060443Jy  sigma=1.561211
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000167643 Jy
! Component: 100  -  total flux cleaned = -0.000270602 Jy
! Component: 150  -  total flux cleaned = -0.000333696 Jy
! Component: 200  -  total flux cleaned = -0.000363834 Jy
! Total flux subtracted in 200 components = -0.000363834 Jy
! Clean residual min=-0.003444 max=0.003277 Jy/beam
! Clean residual mean=-0.000002 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.336455 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 94 components and 0.336455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060404Jy  sigma=1.560351
! Fit after  self-cal, rms=0.060405Jy  sigma=1.560293
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060405Jy  sigma=1.560293
! Fit after  self-cal, rms=0.060479Jy  sigma=1.560119
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.997 mas, bmaj=3.584 mas, bpa=-9.314 degrees
! Estimated noise=0.448632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000966638 Jy
! Component: 100  -  total flux cleaned = -0.00125977 Jy
! Component: 150  -  total flux cleaned = -0.0014908 Jy
! Component: 200  -  total flux cleaned = -0.00165527 Jy
! Total flux subtracted in 200 components = -0.00165527 Jy
! Clean residual min=-0.004359 max=0.003853 Jy/beam
! Clean residual mean=-0.000005 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.334799 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 100 components and 0.334799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060478Jy  sigma=1.559861
! Fit after  self-cal, rms=0.060473Jy  sigma=1.559708
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000406723 Jy
! Component: 100  -  total flux cleaned = -0.000482445 Jy
! Component: 150  -  total flux cleaned = -0.000600727 Jy
! Component: 200  -  total flux cleaned = -0.00068693 Jy
! Total flux subtracted in 200 components = -0.00068693 Jy
! Clean residual min=-0.004296 max=0.003739 Jy/beam
! Clean residual mean=-0.000006 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.334112 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 105 components and 0.334112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060477Jy  sigma=1.559763
! Fit after  self-cal, rms=0.060476Jy  sigma=1.559707
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9166 mas, bmaj=1.667 mas, bpa=-2.1 degrees
! Estimated noise=0.367089 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9166 x 1.667 at -2.1 degrees (North through East)
! Clean map  min=-0.0031093  max=0.15885 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7085 mas, bmaj=1.3 mas, bpa=-4.68 degrees
! Estimated noise=0.756715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124685 Jy
! Component: 100  -  total flux cleaned = 0.178157 Jy
! Component: 150  -  total flux cleaned = 0.211752 Jy
! Component: 200  -  total flux cleaned = 0.235435 Jy
! Total flux subtracted in 200 components = 0.235435 Jy
! Clean residual min=-0.014707 max=0.015143 Jy/beam
! Clean residual mean=-0.000008 rms=0.003473 Jy/beam
! Combined flux in latest and established models = 0.235435 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.235435 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9166 mas, bmaj=1.667 mas, bpa=-2.1 degrees
! Estimated noise=0.367089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0318211 Jy
! Component: 100  -  total flux cleaned = 0.0524939 Jy
! Component: 150  -  total flux cleaned = 0.0671675 Jy
! Component: 200  -  total flux cleaned = 0.0777887 Jy
! Total flux subtracted in 200 components = 0.0777887 Jy
! Clean residual min=-0.007420 max=0.008174 Jy/beam
! Clean residual mean=-0.000004 rms=0.002034 Jy/beam
! Combined flux in latest and established models = 0.313223 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 49 components and 0.313223 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.997 mas, bmaj=3.584 mas, bpa=-9.314 degrees
! Estimated noise=0.448632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122573 Jy
! Component: 100  -  total flux cleaned = 0.018585 Jy
! Component: 150  -  total flux cleaned = 0.0198625 Jy
! Component: 200  -  total flux cleaned = 0.0209021 Jy
! Total flux subtracted in 200 components = 0.0209021 Jy
! Clean residual min=-0.004845 max=0.004968 Jy/beam
! Clean residual mean=-0.000003 rms=0.001383 Jy/beam
! Combined flux in latest and established models = 0.334125 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.43081e-05 Jy
! Component: 100  -  total flux cleaned = 7.70842e-05 Jy
! Component: 150  -  total flux cleaned = 8.26314e-06 Jy
! Component: 200  -  total flux cleaned = -0.00017065 Jy
! Total flux subtracted in 200 components = -0.00017065 Jy
! Clean residual min=-0.004118 max=0.004220 Jy/beam
! Clean residual mean=-0.000004 rms=0.001201 Jy/beam
! Combined flux in latest and established models = 0.333955 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 73 components and 0.333955 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9166 mas, bmaj=1.667 mas, bpa=-2.1 degrees
! Estimated noise=0.367089 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000981449 Jy
! Component: 100  -  total flux cleaned = 0.000981867 Jy
! Component: 150  -  total flux cleaned = 0.00109716 Jy
! Component: 200  -  total flux cleaned = 0.00109141 Jy
! Total flux subtracted in 200 components = 0.00109141 Jy
! Clean residual min=-0.003402 max=0.003549 Jy/beam
! Clean residual mean=-0.000001 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.335046 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 91 components and 0.335046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060698Jy  sigma=1.565015
! Fit after  self-cal, rms=0.060602Jy  sigma=1.562549
wmodel /J2358+3922_X_map.mod
! wmodel: Unable to open new model file: /J2358+3922_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2358+3922_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9166 x 1.667 at -2.1 degrees (North through East)
! Clean map  min=-0.0034889  max=0.1553 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2358+3922_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.155297 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000891528 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.72224 1.72224 3.44448 6.88895 13.7779 27.5558 55.1116
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0026 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.155 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  174.191 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2358+3922_X_dfm.log closed on Fri May 20 00:24:55 2016