! Started logfile: /scr/pima/bg219a_uvs/J2358+3922_S_dfm.log on Fri May 20 00:24:49 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2358+3922_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2358+3922_S_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2358+3922
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1800 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2358+3922_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.098600Jy  sigma=27.387484
! Fit after  self-cal, rms=0.641736Jy  sigma=15.360923
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.746 mas, bmaj=5.372 mas, bpa=-10.97 degrees
! Estimated noise=0.982663 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.280341 Jy
! Component: 100  -  total flux cleaned = 0.370875 Jy
! Total flux subtracted in 100 components = 0.370875 Jy
! Clean residual min=-0.017265 max=0.035382 Jy/beam
! Clean residual mean=0.000037 rms=0.005599 Jy/beam
! Combined flux in latest and established models = 0.370875 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.370875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076563Jy  sigma=1.794406
! Fit after  self-cal, rms=0.076550Jy  sigma=1.791905
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344208 Jy
! Component: 100  -  total flux cleaned = 0.0490452 Jy
! Total flux subtracted in 100 components = 0.0490452 Jy
! Clean residual min=-0.010539 max=0.017108 Jy/beam
! Clean residual mean=0.000001 rms=0.003139 Jy/beam
! Combined flux in latest and established models = 0.419921 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 11 components and 0.419921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058872Jy  sigma=1.338317
! Fit after  self-cal, rms=0.058816Jy  sigma=1.336166
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.293 mas, bmaj=6.261 mas, bpa=-9.587 degrees
! Estimated noise=0.740259 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100683 Jy
! Component: 100  -  total flux cleaned = 0.0143556 Jy
! Component: 150  -  total flux cleaned = 0.0154785 Jy
! Component: 200  -  total flux cleaned = 0.0156387 Jy
! Total flux subtracted in 200 components = 0.0156387 Jy
! Clean residual min=-0.008572 max=0.018802 Jy/beam
! Clean residual mean=-0.000027 rms=0.003197 Jy/beam
! Combined flux in latest and established models = 0.435559 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 0.435559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057152Jy  sigma=1.298940
! Fit after  self-cal, rms=0.057023Jy  sigma=1.295514
! Inverting map 
! Added new window around map position (-6.5, -5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157386 Jy
! Component: 100  -  total flux cleaned = 0.021616 Jy
! Component: 150  -  total flux cleaned = 0.0233704 Jy
! Component: 200  -  total flux cleaned = 0.0244938 Jy
! Total flux subtracted in 200 components = 0.0244938 Jy
! Clean residual min=-0.005131 max=0.007013 Jy/beam
! Clean residual mean=-0.000020 rms=0.001587 Jy/beam
! Combined flux in latest and established models = 0.460053 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 49 components and 0.460053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052888Jy  sigma=1.174419
! Fit after  self-cal, rms=0.052585Jy  sigma=1.166603
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.293 x 6.261 at -9.587 degrees (North through East)
! Clean map  min=-0.0052996  max=0.36227 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.03     NL        0.98     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.96     NL        1.02     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.96     NL        1.01     OV        1.00     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.052585Jy  sigma=1.166603
! Fit after  self-cal, rms=0.051383Jy  sigma=1.149580
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.279 mas, bmaj=6.232 mas, bpa=-9.387 degrees
! Estimated noise=0.7362 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00447256 Jy
! Component: 100  -  total flux cleaned = 0.00576019 Jy
! Component: 150  -  total flux cleaned = 0.0060038 Jy
! Component: 200  -  total flux cleaned = 0.00586934 Jy
! Total flux subtracted in 200 components = 0.00586934 Jy
! Clean residual min=-0.003828 max=0.004162 Jy/beam
! Clean residual mean=-0.000014 rms=0.001067 Jy/beam
! Combined flux in latest and established models = 0.465922 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 69 components and 0.465922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050932Jy  sigma=1.137693
! Fit after  self-cal, rms=0.050873Jy  sigma=1.136516
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050873Jy  sigma=1.136516
! Fit after  self-cal, rms=0.050330Jy  sigma=1.127664
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.274 mas, bmaj=6.218 mas, bpa=-9.381 degrees
! Estimated noise=0.734459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202263 Jy
! Component: 100  -  total flux cleaned = 0.00217989 Jy
! Component: 150  -  total flux cleaned = 0.00213909 Jy
! Component: 200  -  total flux cleaned = 0.00199523 Jy
! Total flux subtracted in 200 components = 0.00199523 Jy
! Clean residual min=-0.002798 max=0.003118 Jy/beam
! Clean residual mean=-0.000002 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.467918 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.467918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050182Jy  sigma=1.124714
! Fit after  self-cal, rms=0.050170Jy  sigma=1.124265
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000252685 Jy
! Component: 100  -  total flux cleaned = 0.000251468 Jy
! Component: 150  -  total flux cleaned = 0.000248617 Jy
! Component: 200  -  total flux cleaned = 0.000223108 Jy
! Total flux subtracted in 200 components = 0.000223108 Jy
! Clean residual min=-0.002818 max=0.002988 Jy/beam
! Clean residual mean=-0.000002 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.468141 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.468141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050123Jy  sigma=1.123421
! Fit after  self-cal, rms=0.050121Jy  sigma=1.123253
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050121Jy  sigma=1.123253
! Fit after  self-cal, rms=0.050033Jy  sigma=1.122903
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.274 mas, bmaj=6.215 mas, bpa=-9.36 degrees
! Estimated noise=0.733693 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754877 Jy
! Component: 100  -  total flux cleaned = 0.000701842 Jy
! Component: 150  -  total flux cleaned = 0.00065667 Jy
! Component: 200  -  total flux cleaned = 0.000599261 Jy
! Total flux subtracted in 200 components = 0.000599261 Jy
! Clean residual min=-0.002768 max=0.003053 Jy/beam
! Clean residual mean=-0.000001 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.46874 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 100 components and 0.46874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050002Jy  sigma=1.122304
! Fit after  self-cal, rms=0.050001Jy  sigma=1.122200
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.27822e-07 Jy
! Component: 100  -  total flux cleaned = -1.80748e-05 Jy
! Component: 150  -  total flux cleaned = -4.93943e-05 Jy
! Component: 200  -  total flux cleaned = -7.67364e-05 Jy
! Total flux subtracted in 200 components = -7.67364e-05 Jy
! Clean residual min=-0.002802 max=0.003040 Jy/beam
! Clean residual mean=-0.000001 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.468663 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 104 components and 0.468663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049988Jy  sigma=1.121973
! Fit after  self-cal, rms=0.049989Jy  sigma=1.121928
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049989Jy  sigma=1.121928
! Fit after  self-cal, rms=0.049966Jy  sigma=1.121796
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.236 mas, bmaj=12.89 mas, bpa=-9.646 degrees
! Estimated noise=0.905311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.77729e-05 Jy
! Component: 100  -  total flux cleaned = -1.0625e-05 Jy
! Component: 150  -  total flux cleaned = -9.13044e-06 Jy
! Component: 200  -  total flux cleaned = -9.31226e-06 Jy
! Total flux subtracted in 200 components = -9.31226e-06 Jy
! Clean residual min=-0.003682 max=0.003246 Jy/beam
! Clean residual mean=0.000001 rms=0.001099 Jy/beam
! Combined flux in latest and established models = 0.468654 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 114 components and 0.468654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049961Jy  sigma=1.121786
! Fit after  self-cal, rms=0.049962Jy  sigma=1.121648
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.9917e-05 Jy
! Component: 100  -  total flux cleaned = 2.21494e-05 Jy
! Component: 150  -  total flux cleaned = 5.39653e-05 Jy
! Component: 200  -  total flux cleaned = 5.35921e-05 Jy
! Total flux subtracted in 200 components = 5.35921e-05 Jy
! Clean residual min=-0.003672 max=0.003183 Jy/beam
! Clean residual mean=0.000001 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.468708 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 122 components and 0.468708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049971Jy  sigma=1.121886
! Fit after  self-cal, rms=0.049972Jy  sigma=1.121773
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.275 mas, bmaj=6.216 mas, bpa=-9.341 degrees
! Estimated noise=0.733294 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.275 x 6.216 at -9.341 degrees (North through East)
! Clean map  min=-0.0027226  max=0.36043 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.741 mas, bmaj=5.335 mas, bpa=-10.59 degrees
! Estimated noise=0.971067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.276995 Jy
! Component: 100  -  total flux cleaned = 0.366096 Jy
! Component: 150  -  total flux cleaned = 0.401042 Jy
! Component: 200  -  total flux cleaned = 0.420044 Jy
! Total flux subtracted in 200 components = 0.420044 Jy
! Clean residual min=-0.008629 max=0.011559 Jy/beam
! Clean residual mean=0.000012 rms=0.002472 Jy/beam
! Combined flux in latest and established models = 0.420044 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.420044 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.275 mas, bmaj=6.216 mas, bpa=-9.341 degrees
! Estimated noise=0.733294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24.5, -18.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167993 Jy
! Component: 100  -  total flux cleaned = 0.027152 Jy
! Component: 150  -  total flux cleaned = 0.0341481 Jy
! Component: 200  -  total flux cleaned = 0.0390675 Jy
! Total flux subtracted in 200 components = 0.0390675 Jy
! Clean residual min=-0.004295 max=0.004115 Jy/beam
! Clean residual mean=-0.000005 rms=0.001183 Jy/beam
! Combined flux in latest and established models = 0.459112 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 37 components and 0.459112 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.236 mas, bmaj=12.89 mas, bpa=-9.646 degrees
! Estimated noise=0.905311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00584881 Jy
! Component: 100  -  total flux cleaned = 0.00846371 Jy
! Component: 150  -  total flux cleaned = 0.00909633 Jy
! Component: 200  -  total flux cleaned = 0.00939611 Jy
! Total flux subtracted in 200 components = 0.00939611 Jy
! Clean residual min=-0.004036 max=0.003864 Jy/beam
! Clean residual mean=-0.000003 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.468508 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000250936 Jy
! Component: 100  -  total flux cleaned = 0.000459825 Jy
! Component: 150  -  total flux cleaned = 0.000634314 Jy
! Component: 200  -  total flux cleaned = 0.00074801 Jy
! Total flux subtracted in 200 components = 0.00074801 Jy
! Clean residual min=-0.003712 max=0.003247 Jy/beam
! Clean residual mean=-0.000002 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.469256 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 79 components and 0.469256 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.275 mas, bmaj=6.216 mas, bpa=-9.341 degrees
! Estimated noise=0.733294 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00035477 Jy
! Component: 100  -  total flux cleaned = 0.000274744 Jy
! Component: 150  -  total flux cleaned = 0.000437177 Jy
! Component: 200  -  total flux cleaned = 0.000576609 Jy
! Total flux subtracted in 200 components = 0.000576609 Jy
! Clean residual min=-0.003073 max=0.002966 Jy/beam
! Clean residual mean=-0.000001 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.469833 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 94 components and 0.469833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050011Jy  sigma=1.123026
! Fit after  self-cal, rms=0.049999Jy  sigma=1.122618
wmodel /J2358+3922_S_map.mod
! wmodel: Unable to open new model file: /J2358+3922_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2358+3922_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.275 x 6.216 at -9.341 degrees (North through East)
! Clean map  min=-0.003729  max=0.35834 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2358+3922_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.358342 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000706717 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.591656 0.591656 1.18331 2.36662 4.73325 9.46649 18.933 37.866 75.7319
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.358 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  507.051 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2358+3922_S_dfm.log closed on Fri May 20 00:24:51 2016